summaryrefslogtreecommitdiffstats
path: root/tools/bpf
AgeCommit message (Collapse)AuthorFilesLines
2019-04-25tools: bpftool: fix infinite loop in map createAlban Crequy1-0/+3
"bpftool map create" has an infinite loop on "while (argc)". The error case is missing. Symptoms: when forgetting to type the keyword 'type' in front of 'hash': $ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128 (infinite loop, taking all the CPU) ^C After the patch: $ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128 Error: unknown arg hash Fixes: 0b592b5a01be ("tools: bpftool: add map create command") Signed-off-by: Alban Crequy <alban@kinvolk.io> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-19bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()Song Liu1-207/+59
This patches uses bpf_program__get_prog_info_linear() to simplify the logic in prog.c do_dump(). Committer testing: Before: # bpftool prog dump xlated id 208 > /tmp/dump.xlated.before # bpftool prog dump jited id 208 > /tmp/dump.jited.before # bpftool map dump id 107 > /tmp/map.dump.before After: # ~acme/git/perf/tools/bpf/bpftool/bpftool map dump id 107 > /tmp/map.dump.after # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208 > /tmp/dump.xlated.after # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump jited id 208 > /tmp/dump.jited.after # diff -u /tmp/dump.xlated.before /tmp/dump.xlated.after # diff -u /tmp/dump.jited.before /tmp/dump.jited.after # diff -u /tmp/map.dump.before /tmp/map.dump.after # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208 0: (bf) r6 = r1 1: (85) call bpf_get_current_pid_tgid#80800 2: (63) *(u32 *)(r10 -328) = r0 3: (bf) r2 = r10 4: (07) r2 += -328 5: (18) r1 = map[id:107] 7: (85) call __htab_map_lookup_elem#85680 8: (15) if r0 == 0x0 goto pc+1 9: (07) r0 += 56 10: (b7) r7 = 0 11: (55) if r0 != 0x0 goto pc+52 12: (bf) r1 = r10 13: (07) r1 += -328 14: (b7) r2 = 64 15: (bf) r3 = r6 16: (85) call bpf_probe_read#-46848 17: (bf) r2 = r10 18: (07) r2 += -320 19: (18) r1 = map[id:106] 21: (07) r1 += 208 22: (61) r0 = *(u32 *)(r2 +0) 23: (35) if r0 >= 0x200 goto pc+3 24: (67) r0 <<= 3 25: (0f) r0 += r1 26: (05) goto pc+1 27: (b7) r0 = 0 28: (15) if r0 == 0x0 goto pc+35 29: (71) r1 = *(u8 *)(r0 +0) 30: (15) if r1 == 0x0 goto pc+33 31: (b7) r5 = 64 32: (79) r1 = *(u64 *)(r10 -320) 33: (15) if r1 == 0x2 goto pc+2 34: (15) if r1 == 0x101 goto pc+3 35: (55) if r1 != 0x15 goto pc+19 36: (79) r3 = *(u64 *)(r6 +16) 37: (05) goto pc+1 38: (79) r3 = *(u64 *)(r6 +24) 39: (15) if r3 == 0x0 goto pc+15 40: (b7) r1 = 0 41: (63) *(u32 *)(r10 -260) = r1 42: (bf) r1 = r10 43: (07) r1 += -256 44: (b7) r2 = 256 45: (85) call bpf_probe_read_str#-46704 46: (b7) r5 = 328 47: (63) *(u32 *)(r10 -264) = r0 48: (bf) r1 = r0 49: (67) r1 <<= 32 50: (77) r1 >>= 32 51: (25) if r1 > 0xff goto pc+3 52: (07) r0 += 72 53: (57) r0 &= 255 54: (bf) r5 = r0 55: (bf) r4 = r10 56: (07) r4 += -328 57: (bf) r1 = r6 58: (18) r2 = map[id:105] 60: (18) r3 = 0xffffffff 62: (85) call bpf_perf_event_output_tp#-45104 63: (bf) r7 = r0 64: (bf) r0 = r7 65: (95) exit # Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: kernel-team@fb.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-4-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-01tools: libbpf: add a correctly named define for map iterationJakub Kicinski1-2/+2
For historical reasons the helper to loop over maps in an object is called bpf_map__for_each while it really should be called bpf_object__for_each_map. Rename and add a correctly named define for backward compatibility. Switch all in-tree users to the correct name (Quentin). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-27tools/bpftool: recognize bpf_prog_info run_time_ns and run_cntAlexei Starovoitov2-1/+10
$ bpftool p s 1: kprobe tag a56587d488d216c9 gpl run_time_ns 79786 run_cnt 8 loaded_at 2019-02-22T12:22:51-0800 uid 0 xlated 352B not jited memlock 4096B $ bpftool --json --pretty p s [{ "id": 1, "type": "kprobe", "tag": "a56587d488d216c9", "gpl_compatible": true, "run_time_ns": 79786, "run_cnt": 8, "loaded_at": 1550866971, "uid": 0, "bytes_xlated": 352, "jited": false, "bytes_memlock": 4096 } ] Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-19bpf: bpftool, fix documentation for attach typesAlban Crequy3-4/+4
bpftool has support for attach types "stream_verdict" and "stream_parser" but the documentation was referring to them as "skb_verdict" and "skb_parse". The inconsistency comes from commit b7d3826c2ed6 ("bpf: bpftool, add support for attaching programs to maps"). This patch changes the documentation to match the implementation: - "bpftool prog help" - man pages - bash completion Signed-off-by: Alban Crequy <alban@kinvolk.io> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-1/+3
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-02-16 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong. 2) test all bpf progs in alu32 mode, from Jiong. 3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin. 4) support for IP encap in lwt bpf progs, from Peter. 5) remove XDP_QUERY_XSK_UMEM dead code, from Jan. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12tools: bpftool: doc, add text about feature-subcommandPrashant Bhole1-1/+3
This patch adds missing information about feature-subcommand in bpftool.rst Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-16/+28
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06tools: bpftool: doc, fix incorrect textPrashant Bhole3-5/+5
Documentation about cgroup, feature, prog uses wrong header 'MAP COMMANDS' while listing commands. This patch corrects the header in respective doc files. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Yonghong Song <yhs@fb.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller15-113/+1236
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-01-29 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Teach verifier dead code removal, this also allows for optimizing / removing conditional branches around dead code and to shrink the resulting image. Code store constrained architectures like nfp would have hard time doing this at JIT level, from Jakub. 2) Add JMP32 instructions to BPF ISA in order to allow for optimizing code generation for 32-bit sub-registers. Evaluation shows that this can result in code reduction of ~5-20% compared to 64 bit-only code generation. Also add implementation for most JITs, from Jiong. 3) Add support for __int128 types in BTF which is also needed for vmlinux's BTF conversion to work, from Yonghong. 4) Add a new command to bpftool in order to dump a list of BPF-related parameters from the system or for a specific network device e.g. in terms of available prog/map types or helper functions, from Quentin. 5) Add AF_XDP sock_diag interface for querying sockets from user space which provides information about the RX/TX/fill/completion rings, umem, memory usage etc, from Björn. 6) Add skb context access for skb_shared_info->gso_segs field, from Eric. 7) Add support for testing flow dissector BPF programs by extending existing BPF_PROG_TEST_RUN infrastructure, from Stanislav. 8) Split BPF kselftest's test_verifier into various subgroups of tests in order better deal with merge conflicts in this area, from Jakub. 9) Add support for queue/stack manipulations in bpftool, from Stanislav. 10) Document BTF, from Yonghong. 11) Dump supported ELF section names in libbpf on program load failure, from Taeung. 12) Silence a false positive compiler warning in verifier's BTF handling, from Peter. 13) Fix help string in bpftool's feature probing, from Prashant. 14) Remove duplicate includes in BPF kselftests, from Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29tools: bpftool: warn about risky prog array updatesJakub Kicinski1-0/+3
When prog array is updated with bpftool users often refer to the map via the ID. Unfortunately, that's likely to lead to confusion because prog arrays get flushed when the last user reference is gone. If there is no other reference bpftool will create one, update successfully just to close the map again and have it flushed. Warn about this case in non-JSON mode. If the problem continues causing confusion we can remove the support for referring to a map by ID for prog array update completely. For now it seems like the potential inconvenience to users who know what they're doing outweighs the benefit. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-28tools: bpftool: fix crash with un-owned prog arraysJakub Kicinski2-14/+9
Prog arrays don't have 'owner_prog_type' and 'owner_jited' fields in their fdinfo when they are created. Those fields are set and reported when first program is checked for compatibility by bpf_prog_array_compatible(). This means that bpftool cannot expect the fields to always be there. Currently trying to show maps on a system with an un-owned prog array leads to a crash: $ bpftool map show 389: prog_array name tail_call_map flags 0x0 Error: key 'owner_prog_type' not found in fdinfo Error: key 'owner_jited' not found in fdinfo key 4B value 4B max_entries 4 memlock 4096B Segmentation fault (core dumped) We pass a NULL pointer to atoi(). Remove the assumption that fdinfo keys are always present. Add missing validations and remove the p_err() calls which may lead to broken JSON output as caller will not propagate the failure. Fixes: 99a44bef5870 ("tools: bpftool: add owner_prog_type and owner_jited to bpftool output") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-26tools: bpftool: teach cfg code about JMP32Jiong Wang1-2/+7
The cfg code need to be aware of the new JMP32 instruction class so it could partition functions correctly. Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-24bpftool: feature probing, change default actionPrashant Bhole1-1/+1
When 'bpftool feature' is executed it shows incorrect help string. test# bpftool feature Usage: bpftool bpftool probe [COMPONENT] [macros [prefix PREFIX]] bpftool bpftool help COMPONENT := { kernel | dev NAME } Instead of fixing the help text by tweaking argv[] indices, this patch changes the default action to 'probe'. It makes the behavior consistent with other subcommands, where first subcommand without extra parameter results in 'show' action. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-23libbpf: Show supported ELF section names when failing to guess prog/attach typeTaeung Song1-7/+3
We need to let users check their wrong ELF section name with proper ELF section names when they fail to get a prog/attach type from it. Because users can't realize libbpf guess prog/attach types from given ELF section names. For example, when a 'cgroup' section name of a BPF program is used, show available ELF section names(types). Before: $ bpftool prog load bpf-prog.o /sys/fs/bpf/prog1 Error: failed to guess program type based on ELF section name cgroup After: libbpf: failed to guess program type based on ELF section name 'cgroup' libbpf: supported section(type) names are: socket kprobe/ kretprobe/ classifier action tracepoint/ raw_tracepoint/ xdp perf_event lwt_in lwt_out lwt_xmit lwt_seg6local cgroup_skb/ingress cgroup_skb/egress cgroup/skb cgroup/sock cgroup/post_bind4 cgroup/post_bind6 cgroup/dev sockops sk_skb/stream_parser sk_skb/stream_verdict sk_skb sk_msg lirc_mode2 flow_dissector cgroup/bind4 cgroup/bind6 cgroup/connect4 cgroup/connect6 cgroup/sendmsg4 cgroup/sendmsg6 Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Cc: Quentin Monnet <quentin.monnet@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Andrey Ignatov <rdna@fb.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-23bpftool: fix percpu maps updatingPaolo Abeni1-0/+16
When updating a percpu map, bpftool currently copies the provided value only into the first per CPU copy of the specified value, all others instances are left zeroed. This change explicitly copies the user-provided bytes to all the per CPU instances, keeping the sub-command syntax unchanged. v2 -> v3: - drop unused argument, as per Quentin's suggestion v1 -> v2: - rename the helper as per Quentin's suggestion Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-23bpftool: Fix prog dump by tagJiri Olsa1-2/+3
Lance reported an issue with bpftool not being able to dump program if there are more programs loaded and you want to dump any but the first program, like: # bpftool prog 28: kprobe name trace_req_start tag 1dfc28ba8b3dd597 gpl loaded_at 2019-01-18T17:02:40+1100 uid 0 xlated 112B jited 109B memlock 4096B map_ids 13 29: kprobe name trace_req_compl tag 5b6a5ecc6030a683 gpl loaded_at 2019-01-18T17:02:40+1100 uid 0 xlated 928B jited 575B memlock 4096B map_ids 13,14 # bpftool prog dum jited tag 1dfc28ba8b3dd597 0: push %rbp 1: mov %rsp,%rbp ... # bpftool prog dum jited tag 5b6a5ecc6030a683 Error: can't get prog info (29): Bad address The problem is in the prog_fd_by_tag function not cleaning the struct bpf_prog_info before another request, so the previous program length is still in there and kernel assumes it needs to dump the program, which fails because there's no user pointer set. Moving the struct bpf_prog_info declaration into the loop, so it gets cleaned before each query. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Reported-by: Lance Digby <ldigby@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-22tools: bpftool: add bash completion for bpftool probesQuentin Monnet1-0/+19
Add the bash completion related to the newly introduced "bpftool feature probe" command. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22tools: bpftool: add probes for a network deviceQuentin Monnet2-14/+73
bpftool gained support for probing the current system in order to see what program and map types, and what helpers are available on that system. This patch adds the possibility to pass an interface index to libbpf (and hence to the kernel) when trying to load the programs or to create the maps, in order to see what items a given network device can support. A new keyword "dev <ifname>" can be used as an alternative to "kernel" to indicate that the given device should be tested. If no target ("dev" or "kernel") is specified bpftool defaults to probing the kernel. Sample output: # bpftool -p feature probe dev lo { "syscall_config": { "have_bpf_syscall": true }, "program_types": { "have_sched_cls_prog_type": false, "have_xdp_prog_type": false }, ... } As the target is a network device, /proc/ parameters and kernel configuration are NOT dumped. Availability of the bpf() syscall is still probed, so we can return early if that syscall is not usable (since there is no point in attempting the remaining probes in this case). Among the program types, only the ones that can be offloaded are probed. All map types are probed, as there is no specific rule telling which one could or could not be supported by a device in the future. All helpers are probed (but only for offload-able program types). Caveat: as bpftool does not attempt to attach programs to the device at the moment, probes do not entirely reflect what the device accepts: typically, for Netronome's nfp, results will announce that TC cls offload is available even if support has been deactivated (with e.g. ethtool -K eth1 hw-tc-offload off). v2: - All helpers are probed, whereas previous version would only probe the ones compatible with an offload-able program type. This is because we do not keep a default compatible program type for each helper anymore. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22tools: bpftool: add C-style "#define" output for probesQuentin Monnet2-30/+133
Make bpftool able to dump a subset of the parameters collected by probing the system as a listing of C-style #define macros, so that external projects can reuse the result of this probing and build BPF-based project in accordance with the features available on the system. The new "macros" keyword is used to select this output. An additional "prefix" keyword is added so that users can select a custom prefix for macro names, in order to avoid any namespace conflict. Sample output: # bpftool feature probe kernel macros prefix FOO_ /*** System call availability ***/ #define FOO_HAVE_BPF_SYSCALL /*** eBPF program types ***/ #define FOO_HAVE_SOCKET_FILTER_PROG_TYPE #define FOO_HAVE_KPROBE_PROG_TYPE #define FOO_HAVE_SCHED_CLS_PROG_TYPE ... /*** eBPF map types ***/ #define FOO_HAVE_HASH_MAP_TYPE #define FOO_HAVE_ARRAY_MAP_TYPE #define FOO_HAVE_PROG_ARRAY_MAP_TYPE ... /*** eBPF helper functions ***/ /* * Use FOO_HAVE_PROG_TYPE_HELPER(prog_type_name, helper_name) * to determine if <helper_name> is available for <prog_type_name>, * e.g. * #if FOO_HAVE_PROG_TYPE_HELPER(xdp, bpf_redirect) * // do stuff with this helper * #elif * // use a workaround * #endif */ #define FOO_HAVE_PROG_TYPE_HELPER(prog_type, helper) \ FOO_BPF__PROG_TYPE_ ## prog_type ## __HELPER_ ## helper ... #define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_probe_read 0 #define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_ktime_get_ns 1 #define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_trace_printk 1 ... v3: - Change output for helpers again: add a HAVE_PROG_TYPE_HELPER(type, helper) macro that can be used to tell if <helper> is available for program <type>. v2: - #define-based output added as a distinct patch. - "HAVE_" prefix appended to macro names. - Output limited to bpf() syscall availability, BPF prog and map types, helper functions. In this version kernel config options, procfs parameter or kernel version are intentionally left aside. - Following the change on helper probes, format for helper probes in this output style has changed (now a list of compatible program types). Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22tools: bpftool: add probes for eBPF helper functionsQuentin Monnet2-0/+55
Similarly to what was done for program types and map types, add a set of probes to test the availability of the different eBPF helper functions on the current system. For each known program type, all known helpers are tested, in order to establish a compatibility matrix. Output is provided as a set of lists of available helpers, one per program type. Sample output: # bpftool feature probe kernel ... Scanning eBPF helper functions... eBPF helpers supported for program type socket_filter: - bpf_map_lookup_elem - bpf_map_update_elem - bpf_map_delete_elem ... eBPF helpers supported for program type kprobe: - bpf_map_lookup_elem - bpf_map_update_elem - bpf_map_delete_elem ... # bpftool --json --pretty feature probe kernel { ... "helpers": { "socket_filter_available_helpers": ["bpf_map_lookup_elem", \ "bpf_map_update_elem","bpf_map_delete_elem", ... ], "kprobe_available_helpers": ["bpf_map_lookup_elem", \ "bpf_map_update_elem","bpf_map_delete_elem", ... ], ... } } v5: - In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section. v4: - Use "enum bpf_func_id" instead of "__u32" in bpf_probe_helper() declaration for the type of the argument used to pass the id of the helper to probe. - Undef BPF_HELPER_MAKE_ENTRY after using it. v3: - Do not pass kernel version from bpftool to libbpf probes (kernel version for testing program with kprobes is retrieved directly from libbpf). - Dump one list of available helpers per program type (instead of one list of compatible program types per helper). v2: - Move probes from bpftool to libbpf. - Test all program types for each helper, print a list of working prog types for each helper. - Fall back on include/uapi/linux/bpf.h for names and ids of helpers. - Remove C-style macros output from this patch. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22tools: bpftool: add probes for eBPF map typesQuentin Monnet3-1/+32
Add new probes for eBPF map types, to detect what are the ones available on the system. Try creating one map of each type, and see if the kernel complains. Sample output: # bpftool feature probe kernel ... Scanning eBPF map types... eBPF map_type hash is available eBPF map_type array is available eBPF map_type prog_array is available ... # bpftool --json --pretty feature probe kernel { ... "map_types": { "have_hash_map_type": true, "have_array_map_type": true, "have_prog_array_map_type": true, ... } } v5: - In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section. v3: - Use a switch with all enum values for setting specific map parameters, so that gcc complains at compile time (-Wswitch-enum) if new map types were added to the kernel but libbpf was not updated. v2: - Move probes from bpftool to libbpf. - Remove C-style macros output from this patch. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22tools: bpftool: add probes for eBPF program typesQuentin Monnet1-1/+47
Introduce probes for supported BPF program types in libbpf, and call it from bpftool to test what types are available on the system. The probe simply consists in loading a very basic program of that type and see if the verifier complains or not. Sample output: # bpftool feature probe kernel ... Scanning eBPF program types... eBPF program_type socket_filter is available eBPF program_type kprobe is available eBPF program_type sched_cls is available ... # bpftool --json --pretty feature probe kernel { ... "program_types": { "have_socket_filter_prog_type": true, "have_kprobe_prog_type": true, "have_sched_cls_prog_type": true, ... } } v5: - In libbpf.map, move global symbol to a new LIBBPF_0.0.2 section. - Rename (non-API function) prog_load() as probe_load(). v3: - Get kernel version for checking kprobes availability from libbpf instead of from bpftool. Do not pass kernel_version as an argument when calling libbpf probes. - Use a switch with all enum values for setting specific program parameters just before probing, so that gcc complains at compile time (-Wswitch-enum) if new prog types were added to the kernel but libbpf was not updated. - Add a comment in libbpf.h about setrlimit() usage to allow many consecutive probe attempts. v2: - Move probes from bpftool to libbpf. - Remove C-style macros output from this patch. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22tools: bpftool: add probes for kernel configuration optionsQuentin Monnet1-0/+182
Add probes to dump a number of options set (or not set) for compiling the kernel image. These parameters provide information about what BPF components should be available on the system. A number of them are not directly related to eBPF, but are in fact used in the kernel as conditions on which to compile, or not to compile, some of the eBPF helper functions. Sample output: # bpftool feature probe kernel Scanning system configuration... ... CONFIG_BPF is set to y CONFIG_BPF_SYSCALL is set to y CONFIG_HAVE_EBPF_JIT is set to y ... # bpftool --pretty --json feature probe kernel { "system_config": { ... "CONFIG_BPF": "y", "CONFIG_BPF_SYSCALL": "y", "CONFIG_HAVE_EBPF_JIT": "y", ... } } v5: - Declare options[] array in probe_kernel_image_config() as static. v4: - Add some options to the list: - CONFIG_TRACING - CONFIG_KPROBE_EVENTS - CONFIG_UPROBE_EVENTS - CONFIG_FTRACE_SYSCALLS - Add comments about those options in the source code. v3: - Add a comment about /proc/config.gz not being supported as a path for the config file at this time. - Use p_info() instead of p_err() on failure to get options from config file, as bpftool keeps probing other parameters and that would possibly create duplicate "error" entries for JSON. v2: - Remove C-style macros output from this patch. - NOT addressed: grouping of those config options into subsections (I don't see an easy way of grouping them at the moment, please see also the discussion on v1 thread). Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22tools: bpftool: add probes for /proc/ eBPF parametersQuentin Monnet1-0/+187
Add a set of probes to dump the eBPF-related parameters available from /proc/: availability of bpf() syscall for unprivileged users, JIT compiler status and hardening status, kallsyms exports status. Sample output: # bpftool feature probe kernel Scanning system configuration... bpf() syscall for unprivileged users is enabled JIT compiler is disabled JIT compiler hardening is disabled JIT compiler kallsyms exports are disabled Global memory limit for JIT compiler for unprivileged users \ is 264241152 bytes ... # bpftool --json --pretty feature probe kernel { "system_config": { "unprivileged_bpf_disabled": 0, "bpf_jit_enable": 0, "bpf_jit_harden": 0, "bpf_jit_kallsyms": 0, "bpf_jit_limit": 264241152 }, ... } These probes are skipped if procfs is not mounted. v4: - Add bpf_jit_limit parameter. v2: - Remove C-style macros output from this patch. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22tools: bpftool: add basic probe capability, probe syscall availabilityQuentin Monnet10-1/+200
Add a new component and command for bpftool, in order to probe the system to dump a set of eBPF-related parameters so that users can know what features are available on the system. Parameters are dumped in plain or JSON output (with -j/-p options). The current patch introduces probing of one simple parameter: availability of the bpf() system call. Later commits will add other probes. Sample output: # bpftool feature probe kernel Scanning system call availability... bpf() syscall is available # bpftool --json --pretty feature probe kernel { "syscall_config": { "have_bpf_syscall": true } } The optional "kernel" keyword enforces probing of the current system, which is the only possible behaviour at this stage. It can be safely omitted. The feature comes with the relevant man page, but bash completion will come in a dedicated commit. v3: - Do not probe kernel version. Contrarily to what is written below for v2, we can have the kernel version retrieved in libbpf instead of bpftool (in the patch adding probing for program types). v2: - Remove C-style macros output from this patch. - Even though kernel version is no longer needed for testing kprobes availability, note that we still collect it in this patch so that bpftool gets able to probe (in next patches) older kernels as well. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-18tools: bpftool: Cleanup license messThomas Gleixner2-11/+1
Precise and non-ambiguous license information is important. The recent relicensing of the bpftools introduced a license conflict. The files have now: SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause and * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version Amazingly about 20 people acked that change and neither they nor the committer noticed. Oh well. Digging deeper: The files were imported from the iproute2 repository with the GPL V2 or later boiler plate text in commit b66e907cfee2 ("tools: bpftool: copy JSON writer from iproute2 repository") Looking at the iproute2 repository at git://git.kernel.org/pub/scm/network/iproute2/iproute2.git the following commit is the equivivalent: commit d9d8c839 ("json_writer: add SPDX Identifier (GPL-2/BSD-2)") That commit explicitly removes the boiler plate and relicenses the code uner GPL-2.0-only and BSD-2-Clause. As Steven wrote the original code and also the relicensing commit, it's assumed that the relicensing was intended to do exaclty that. Just the kernel side update failed to remove the boiler plate. Do so now. Fixes: 907b22365115 ("tools: bpftool: dual license all files") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Roman Gushchin <guro@fb.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Yonghong Song <yhs@fb.com> Cc: Stanislav Fomichev <sdf@google.com> Cc: Sean Young <sean@mess.org> Cc: Jiri Benc <jbenc@redhat.com> Cc: David Calavera <david.calavera@gmail.com> Cc: Andrey Ignatov <rdna@fb.com> Cc: Joe Stringer <joe@wand.net.nz> Cc: David Ahern <dsahern@gmail.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Petar Penkov <ppenkov@stanford.edu> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Quentin Monnet <quentin.monnet@netronome.com> CC: okash.khawaja@gmail.com Cc: netdev@vger.kernel.org Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-17bpftool: add bash completion for peek/push/enqueue/pop/dequeueStanislav Fomichev1-18/+73
bpftool map peek id <TAB> - suggests only queue and stack map ids bpftool map pop id <TAB> - suggests only stack map ids bpftool map dequeue id <TAB> - suggests only queue map ids bpftool map push id <TAB> - suggests only stack map ids bpftool map enqueue id <TAB> - suggests only queue map ids bpftool map push id 1 <TAB> - suggests 'value', not 'key' bpftool map enqueue id 2 <TAB> - suggests 'value', not 'key' bpftool map update id <stack/queue type> - suggests 'value', not 'key' bpftool map lookup id <stack/queue type> - suggests nothing Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-17bpftool: add pop and dequeue commandsStanislav Fomichev2-35/+98
This is intended to be used with queues and stacks, it pops and prints the last element via bpf_map_lookup_and_delete_elem. Example: bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q bpftool map push pinned /sys/fs/bpf/q value 0 1 2 3 bpftool map pop pinned /sys/fs/bpf/q value: 00 01 02 03 bpftool map pop pinned /sys/fs/bpf/q Error: empty map bpftool map create /sys/fs/bpf/s type stack value 4 entries 10 name s bpftool map enqueue pinned /sys/fs/bpf/s value 0 1 2 3 bpftool map dequeue pinned /sys/fs/bpf/s value: 00 01 02 03 bpftool map dequeue pinned /sys/fs/bpf/s Error: empty map Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-17bpftool: add push and enqueue commandsStanislav Fomichev2-1/+14
This is intended to be used with queues and stacks and be more user-friendly than 'update' without the key. Example: bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q bpftool map push pinned /sys/fs/bpf/q value 0 1 2 3 bpftool map peek pinned /sys/fs/bpf/q value: 00 01 02 03 bpftool map create /sys/fs/bpf/s type stack value 4 entries 10 name s bpftool map enqueue pinned /sys/fs/bpf/s value 0 1 2 3 bpftool map peek pinned /sys/fs/bpf/s value: 00 01 02 03 Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-17bpftool: add peek commandStanislav Fomichev2-1/+7
This is intended to be used with queues and stacks and be more user-friendly than 'lookup' without key/value. Example: bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3 bpftool map peek pinned /sys/fs/bpf/q value: 00 01 02 03 Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-17bpftool: don't print empty key/value for mapsStanislav Fomichev1-19/+28
When doing dump or lookup, don't print key if key_size == 0 or value if value_size == 0. The initial usecase is queue and stack, where we have only values. This is for regular output only, json still has all the fields. Before: bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3 bpftool map lookup pinned /sys/fs/bpf/q key: value: 00 01 02 03 After: bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3 bpftool map lookup pinned /sys/fs/bpf/q value: 00 01 02 03 Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-17bpftool: make key optional in lookup commandStanislav Fomichev2-9/+5
Bpftool expects key for 'lookup' operations. For some map types, key should not be specified. Support looking up those map types. Before: bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3 bpftool map lookup pinned /sys/fs/bpf/q Error: did not find key After: bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3 bpftool map lookup pinned /sys/fs/bpf/q key: value: 00 01 02 03 Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-17bpftool: make key and value optional in update commandStanislav Fomichev2-9/+31
Bpftool expects both key and value for 'update' operations. For some map types, key should not be specified. Support updating those map types. Before: bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3 Error: did not find key After: bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3 Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-16tools/bpf: support __int128 in bpftool map pretty dumperYonghong Song1-12/+86
For formatted output, currently when json is enabled, the decimal number is required. Similar to kernel bpffs printout, for int128 numbers, only hex numbers are dumped, which are quoted as strings. The below is an example to show plain and json pretty print based on the map in test_btf pretty print test. $ bpftool m s 75: hash name pprint_test_has flags 0x0 key 4B value 112B max_entries 4 memlock 4096B $ bpftool m d id 75 ...... { "key": 3, "value": { "ui32": 3, "ui16": 0, "si32": -3, "unused_bits2a": 0x3, "bits28": 0x3, "unused_bits2b": 0x3, "": { "ui64": 3, "ui8a": [3,0,0,0,0,0,0,0 ] }, "aenum": 3, "ui32b": 4, "bits2c": 0x1, "si128a": 0x3, "si128b": 0xfffffffd, "bits3": 0x3, "bits80": 0x10000000000000003, "ui128": 0x20000000000000003 } }, ...... $ bptfool -p -j m d id 75 ...... { "key": ["0x03","0x00","0x00","0x00" ], "value": ["0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00", "0xfd","0xff","0xff","0xff","0x0f","0x00","0x00","0xc0", "0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00", "0x03","0x00","0x00","0x00","0x04","0x00","0x00","0x00", "0x01","0x00","0x00","0x00","0x00","0x00","0x00","0x00", "0x00","0x00","0x00","0x00","0x00","0x00","0x00","0x00", "0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00", "0x00","0x00","0x00","0x00","0x00","0x00","0x00","0x00", "0xfd","0xff","0xff","0xff","0x00","0x00","0x00","0x00", "0x00","0x00","0x00","0x00","0x00","0x00","0x00","0x00", "0x1b","0x00","0x00","0x00","0x00","0x00","0x00","0x00", "0x08","0x00","0x00","0x00","0x00","0x00","0x00","0x00", "0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00", "0x02","0x00","0x00","0x00","0x00","0x00","0x00","0x00" ], "formatted": { "key": 3, "value": { "ui32": 3, "ui16": 0, "si32": -3, "unused_bits2a": "0x3", "bits28": "0x3", "unused_bits2b": "0x3", "": { "ui64": 3, "ui8a": [3,0,0,0,0,0,0,0 ] }, "aenum": 3, "ui32b": 4, "bits2c": "0x1", "si128a": "0x3", "si128b": "0xfffffffd", "bits3": "0x3", "bits80": "0x10000000000000003", "ui128": "0x20000000000000003" } } } ...... Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-16tools/bpf: properly account for libbfd variationsStanislav Fomichev1-1/+8
On some platforms, in order to link against libbfd, we need to link against liberty and even possibly libz. Account for that in the bpftool Makefile. We now have proper feature detection for each case, so handle each one separately. See recent commit 14541b1e7e72 ("perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz") where I fixed feature detection. v2 (addressed Jakub's nits): * better syntax for 'else ifeq' * no space between ifeq args v3: * use LIBS, not EXTLIBS for -DHAVE_LIBBFD_SUPPORT Fixes: 29a9c10e4110 ("bpftool: make libbfd optional") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-11tools/bpf: fix bpftool map dump with bitfieldsYonghong Song1-6/+7
Commit 8772c8bc093b ("tools: bpftool: support pretty print with kind_flag set") added bpftool map dump with kind_flag support. When bitfield_size can be retrieved directly from btf_member, function btf_dumper_bitfield() is called to dump the bitfield. The implementation passed the wrong parameter "bit_offset" to the function. The excepted value is the bit_offset within a byte while the passed-in value is the struct member offset. This commit fixed the bug with passing correct "bit_offset" with adjusted data pointer. Fixes: 8772c8bc093b ("tools: bpftool: support pretty print with kind_flag set") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-19tools: bpftool: do not force gcc as CCIvan Babrou1-2/+0
This allows transparent cross-compilation with CROSS_COMPILE by relying on 7ed1c1901fe5 ("tools: fix cross-compile var clobbering"). Signed-off-by: Ivan Babrou <ivan@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18tools: bpftool: add an option to prevent auto-mount of bpffs, tracefsQuentin Monnet7-2/+31
In order to make life easier for users, bpftool automatically attempts to mount the BPF virtual file system, if it is not mounted already, before trying to pin objects in it. Similarly, it attempts to mount tracefs if necessary before trying to dump the trace pipe to the console. While mounting file systems on-the-fly can improve user experience, some administrators might prefer to avoid that. Let's add an option to block these mount attempts. Note that it does not prevent automatic mounting of tracefs by debugfs for the "bpftool prog tracelog" command. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18tools: bpftool: attempt to mount tracefs if required for tracelog cmdQuentin Monnet3-12/+35
As a follow-up to commit 30da46b5dc3a ("tools: bpftool: add a command to dump the trace pipe"), attempt to mount the tracefs virtual file system if it is not detected on the system before trying to dump content of the tracing pipe on an invocation of "bpftool prog tracelog". Usually, tracefs in automatically mounted by debugfs when the user tries to access it (e.g. "ls /sys/kernel/debug/tracing" mounts the tracefs). So if we failed to find it, it is probably that debugfs is not here either. Therefore, we just attempt a single mount, at a location that does not involve debugfs: /sys/kernel/tracing. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18tools: bpftool: support pretty print with kind_flag setYonghong Song1-9/+27
The following example shows map pretty print with structures which include bitfield members. enum A { A1, A2, A3, A4, A5 }; typedef enum A ___A; struct tmp_t { char a1:4; int a2:4; int :4; __u32 a3:4; int b; ___A b1:4; enum A b2:4; }; struct bpf_map_def SEC("maps") tmpmap = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(__u32), .value_size = sizeof(struct tmp_t), .max_entries = 1, }; BPF_ANNOTATE_KV_PAIR(tmpmap, int, struct tmp_t); and the following map update in the bpf program: key = 0; struct tmp_t t = {}; t.a1 = 2; t.a2 = 4; t.a3 = 6; t.b = 7; t.b1 = 8; t.b2 = 10; bpf_map_update_elem(&tmpmap, &key, &t, 0); With this patch, I am able to print out the map values correctly with this patch: bpftool map dump id 187 [{ "key": 0, "value": { "a1": 0x2, "a2": 0x4, "a3": 0x6, "b": 7, "b1": 0x8, "b2": 0xa } } ] Previously, if a function prototype argument has a typedef type, the prototype is not printed since function __btf_dumper_type_only() bailed out with error if the type is a typedef. This commit corrected this behavior by printing out typedef properly. The following example shows forward type and typedef type can be properly printed in function prototype with modified test_btf_haskv.c. struct t; union u; __attribute__((noinline)) static int test_long_fname_1(struct dummy_tracepoint_args *arg, struct t *p1, union u *p2, __u32 unused) ... int _dummy_tracepoint(struct dummy_tracepoint_args *arg) { return test_long_fname_1(arg, 0, 0, 0); } $ bpftool p d xlated id 24 ... int test_long_fname_1(struct dummy_tracepoint_args * arg, struct t * p1, union u * p2, __u32 unused) ... Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18tools: bpftool: refactor btf_dumper_int_bits()Yonghong Song1-6/+19
The core dump funcitonality in btf_dumper_int_bits() is refactored into a separate function btf_dumper_bitfield() which will be used by the next patch. Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-15tools: bpftool: fix -Wmissing declaration warningsQuentin Monnet4-9/+12
Help compiler check arguments for several utility functions used to print items to the console by adding the "printf" attribute when declaring those functions. Also, declare as "static" two functions that are only used in prog.c. All of them discovered by compiling bpftool with -Wmissing-format-attribute -Wmissing-declarations. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-15tools: bpftool: fix warning on struct bpf_prog_linfo definitionQuentin Monnet1-1/+1
The following warning appears when compiling bpftool without BFD support: main.h:198:23: warning: 'struct bpf_prog_linfo' declared inside parameter list will not be visible outside of this definition or declaration const struct bpf_prog_linfo *prog_linfo, Fix it by declaring struct bpf_prog_linfo even in the case BFD is not supported. Fixes: b053b439b72a ("bpf: libbpf: bpftool: Print bpf_line_info during prog dump") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-15tools: bpftool: add a prog array map update example to documentationQuentin Monnet1-0/+55
Add an example in map documentation to show how to use bpftool in order to update the references to programs hold by prog array maps. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-15tools: bpftool: fix examples in documentation for bpftool progQuentin Monnet1-45/+53
Bring various fixes to the manual page for "bpftool prog" set of commands: - Fix typos ("dum" -> "dump") - Harmonise indentation and format for command output - Update date format for program load time - Add instruction numbers on program dumps - Fix JSON format for the example program listing Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-15tools: bpftool: add doc for -m option to bpftool-prog.rstQuentin Monnet1-0/+3
The --mapcompat|-m option has been documented on the main bpftool.rst page, and on the interactive help. As this option is useful for loading programs with maps with the "bpftool prog load" command, it should also appear in the related bpftool-prog.rst documentation page. Let's add it. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13bpf: Remove !func_info and !line_info check from test_btf and bpftoolMartin KaFai Lau1-7/+0
kernel can provide the func_info and line_info even it fails the btf_dump_raw_ok() test because they don't contain kernel address. This patch removes the corresponding '== 0' test. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13tools: bpftool: dual license all filesJakub Kicinski10-7/+10
Currently bpftool contains a mix of GPL-only and GPL or BSD2 licensed files. Make sure all files are dual licensed under GPLv2 and BSD-2-Clause. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Sean Young <sean@mess.org> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: David Calavera <david.calavera@gmail.com> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Joe Stringer <joe@wand.net.nz> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Acked-by: Petar Penkov <ppenkov@stanford.edu> Acked-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> CC: okash.khawaja@gmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13tools: bpftool: replace Netronome boilerplate with SPDX license headersJakub Kicinski10-330/+15
Replace the repeated license text with SDPX identifiers. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Sean Young <sean@mess.org> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: David Calavera <david.calavera@gmail.com> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Joe Stringer <joe@wand.net.nz> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Acked-by: Petar Penkov <ppenkov@stanford.edu> Acked-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> CC: okash.khawaja@gmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 04:29:51 +0000