summaryrefslogtreecommitdiffstats
path: root/tools/bpf/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2021-07-07tools: bpf: Fix error in 'make -C tools/ bpf_install'Wei Li1-5/+2
make[2]: *** No rule to make target 'install'. Stop. make[1]: *** [Makefile:122: runqslower_install] Error 2 make: *** [Makefile:116: bpf_install] Error 2 There is no rule for target 'install' in tools/bpf/runqslower/Makefile, and there is no need to install it, so just remove 'runqslower_install'. Fixes: 9c01546d26d2 ("tools/bpf: Add runqslower tool to tools/bpf") Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210628030409.3459095-1-liwei391@huawei.com
2020-09-01tools/bpf: build: Make sure resolve_btfids cleans up after itselfToke Høiland-Jørgensen1-2/+2
The new resolve_btfids tool did not clean up the feature detection folder on 'make clean', and also was not called properly from the clean rule in tools/make/ folder on its 'make clean'. This lead to stale objects being left around, which could cause feature detection to fail on subsequent builds. Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/bpf/20200901144343.179552-1-toke@redhat.com
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-1/+8
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-07-21tools: bpf: Use local copy of headers including uapi/linux/filter.hWill Deacon1-1/+2
Pulling header files directly out of the kernel sources for inclusion in userspace programs is highly error prone, not least because it bypasses the kbuild infrastructure entirely and so may end up referencing other header files that have not been generated. Subsequent patches will cause compiler.h to pull in the ungenerated asm/rwonce.h file via filter.h, breaking the build for tools/bpf: | $ make -C tools/bpf | make: Entering directory '/linux/tools/bpf' | CC bpf_jit_disasm.o | LINK bpf_jit_disasm | CC bpf_dbg.o | In file included from /linux/include/uapi/linux/filter.h:9, | from /linux/tools/bpf/bpf_dbg.c:41: | /linux/include/linux/compiler.h:247:10: fatal error: asm/rwonce.h: No such file or directory | #include <asm/rwonce.h> | ^~~~~~~~~~~~~~ | compilation terminated. | make: *** [Makefile:61: bpf_dbg.o] Error 1 | make: Leaving directory '/linux/tools/bpf' Take a copy of the installed version of linux/filter.h (i.e. the one created by the 'headers_install' target) into tools/include/uapi/linux/ and adjust the BPF tool Makefile to reference the local include directories instead of those in the main source tree. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Reported-by: Xiao Yang <ice_yangxiao@163.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-13bpf: Compile resolve_btfids tool at kernel compilation startJiri Olsa1-1/+8
The resolve_btfids tool will be used during the vmlinux linking, so it's necessary it's ready for it. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200711215329.41165-3-jolsa@kernel.org
2020-06-10tools, bpf: Do not force gcc as CCBrett Mastbergen1-1/+0
This allows transparent cross-compilation with CROSS_COMPILE by relying on 7ed1c1901fe5 ("tools: fix cross-compile var clobbering"). Same change was applied to tools/bpf/bpftool/Makefile in 9e88b9312acb ("tools: bpftool: do not force gcc as CC"). Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200609213506.3299-1-brett.mastbergen@gmail.com
2020-06-02tools/bpf: Don't use $(COMPILE.c)Ilya Leoshkevich1-3/+3
When using make kselftest TARGETS=bpf, tools/bpf is built with MAKEFLAGS=rR, which causes $(COMPILE.c) to be undefined, which in turn causes the build to fail with CC kselftest/bpf/tools/build/bpftool/map_perf_ring.o /bin/sh: 1: -MMD: not found Fix by using $(CC) $(CFLAGS) -c instead of $(COMPILE.c). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200602175649.2501580-2-iii@linux.ibm.com
2020-01-13tools/bpf: Add runqslower tool to tools/bpfAndrii Nakryiko1-5/+15
Convert one of BCC tools (runqslower [0]) to BPF CO-RE + libbpf. It matches its BCC-based counterpart 1-to-1, supporting all the same parameters and functionality. runqslower tool utilizes BPF skeleton, auto-generated from BPF object file, as well as memory-mapped interface to global (read-only, in this case) data. Its Makefile also ensures auto-generation of "relocatable" vmlinux.h, which is necessary for BTF-typed raw tracepoints with direct memory access. [0] https://github.com/iovisor/bcc/blob/11bf5d02c895df9646c117c713082eb192825293/tools/runqslower.py Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200113073143.1779940-6-andriin@fb.com
2019-11-24tools, bpf: Fix build for 'make -s tools/bpf O=<dir>'Quentin Monnet1-0/+6
Building selftests with 'make TARGETS=bpf kselftest' was fixed in commit 55d554f5d140 ("tools: bpf: Use !building_out_of_srctree to determine srctree"). However, by updating $(srctree) in tools/bpf/Makefile for in-tree builds only, we leave out the case where we pass an output directory to build BPF tools, but $(srctree) is not set. This typically happens for: $ make -s tools/bpf O=/tmp/foo Makefile:40: /tools/build/Makefile.feature: No such file or directory Fix it by updating $(srctree) in the Makefile not only for out-of-tree builds, but also if $(srctree) is empty. Detected with test_bpftool_build.sh. Fixes: 55d554f5d140 ("tools: bpf: Use !building_out_of_srctree to determine srctree") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Link: https://lore.kernel.org/bpf/20191119105626.21453-1-quentin.monnet@netronome.com
2019-09-30tools: bpf: Use !building_out_of_srctree to determine srctreeShuah Khan1-1/+5
make TARGETS=bpf kselftest fails with: Makefile:127: tools/build/Makefile.include: No such file or directory When the bpf tool make is invoked from tools Makefile, srctree is cleared and the current logic check for srctree equals to empty string to determine srctree location from CURDIR. When the build in invoked from selftests/bpf Makefile, the srctree is set to "." and the same logic used for srctree equals to empty is needed to determine srctree. Check building_out_of_srctree undefined as the condition for both cases to fix "make TARGETS=bpf kselftest" build failure. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20190927011344.4695-1-skhan@linuxfoundation.org
2019-08-31tools: bpf: account for generated feature/ and libbpf/ directoriesQuentin Monnet1-2/+3
When building "tools/bpf" from the top of the Linux repository, the build system passes a value for the $(OUTPUT) Makefile variable to tools/bpf/Makefile and tools/bpf/bpftool/Makefile, which results in generating "libbpf/" (for bpftool) and "feature/" (bpf and bpftool) directories inside the tree. This commit adds such directories to the relevant .gitignore files, and edits the Makefiles to ensure they are removed on "make clean". The use of "rm" is also made consistent throughout those Makefiles (relies on the $(RM) variable, use "--" to prevent interpreting $(OUTPUT)/$(DESTDIR) as options. v2: - New patch. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-25bpf: fix for lex/yacc build error with gcc-5John Fastabend1-0/+2
Fix build error found with Ubuntu shipped gcc-5 ~/git/bpf/tools/bpf$ make all Auto-detecting system features: ... libbfd: [ OFF ] ... disassembler-four-args: [ OFF ] CC bpf_jit_disasm.o LINK bpf_jit_disasm CC bpf_dbg.o /home/john/git/bpf/tools/bpf/bpf_dbg.c: In function ‘cmd_load’: /home/john/git/bpf/tools/bpf/bpf_dbg.c:1077:13: warning: ‘cont’ may be used uninitialized in this function [-Wmaybe-uninitialized] } else if (matches(subcmd, "pcap") == 0) { ^ LINK bpf_dbg CC bpf_asm.o make: *** No rule to make target `bpf_exp.yacc.o', needed by `bpf_asm'. Stop. Fixes: 5a8997f20715 ("tools: bpf: respect output directory during build") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-16tools: bpf: remove feature detection outputJakub Kicinski1-0/+2
bpf tools use feature detection for libbfd dependency, clean up the output files on make clean. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-16tools: bpf: cleanup PHONY targetJakub Kicinski1-1/+1
There is no FORCE target in the Makefile and some of the PHONY targets are missing, update the list. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-09tools: bpf: silence make by not deleting intermediate fileJiri Benc1-1/+1
Even in quiet mode, make finishes with rm tools/bpf/bpf_exp.lex.c That's because it considers the file to be intermediate. Silence that by mentioning the lex.c file instead of the lex.o file; the dependency still stays. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-09tools: bpf: respect quiet/verbose buildJiri Benc1-11/+27
Default to quiet build, with V=1 enabling verbose build as is usual. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-09tools: bpf: call descend in MakefileJiri Benc1-3/+3
Use the descend macro to properly propagate $(subdir) to bpftool. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-09tools: bpf: make install should build firstJiri Benc1-2/+4
Make the 'install' target depend on the 'all' target to build the binaries first. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-09tools: bpf: consistent make bpf_installJiri Benc1-4/+6
Currently, make bpf_install in tools/ does not respect DESTDIR. Moreover, it installs to /usr/bin/ unconditionally. Let it respect DESTDIR and allow prefix to be specified. Also, to be more consistent with bpftool and with the usual customs, default the prefix to /usr/local instead of /usr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-09tools: bpf: respect output directory during buildJiri Benc1-16/+22
Currently, the programs under tools/bpf (with the notable exception of bpftool) do not respect the output directory (make O=dir). Fix that. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-30tools/bpftool: fix bpftool build with bintutils >= 2.9Roman Gushchin1-0/+29
Bpftool build is broken with binutils version 2.29 and later. The cause is commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature. Fix this by adding a new "feature" to the tools/build/features infrastructure and make it responsible for decision which disassembler() function signature to use. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04tools: bpf: add bpftoolJakub Kicinski1-3/+15
Add a simple tool for querying and updating BPF objects on the system. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04tools: rename tools/net directory to tools/bpfJakub Kicinski1-0/+35
We currently only have BPF tools in the tools/net directory. We are about to add more BPF tools there, not necessarily networking related, rename the directory and related Makefile targets to bpf. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 17:25:29 +0000