summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2009-03-09sound: oxygen: enable headphone output on Claro cardsClemens Ladisch1-10/+53
On the HT-Omega Claro (halo) sound cards, the headphone amplifier must be enabled explicitly by setting a GPIO bit. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-27sound: oxygen: zero-initialize model dataClemens Ladisch1-1/+1
Model drivers assume that model_data is zeroed, so we better use kzalloc() (like we did before when it was allocated together with the card structure). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-26sound: virtuoso: add Xonar Essence STX supportClemens Ladisch2-1/+194
Add support for the Asus Xonar Essence STX sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20sound: virtuoso: increase minimum volume to -60 dBClemens Ladisch1-7/+7
Use -60 dB as the minimum value of the master volume mixer control. While the DACs would support ranges down to about -120 dB, such attenuations are not useful in practice. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20sound: oxygen: handle AK5385 ADC on Claro halo cardsClemens Ladisch1-0/+16
The HT-Omega Claro halo's ADC is an AK5385 instead of a WM8785, so we should handle the ADC parameters as we do with the X-Meridian. Using the code for the wrong ADC does not seem to have any audible effects, and the Windows driver does it, but it is nonetheless a good idea to run the AK5385 with an oversampling ratio that is not outside the documented limits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: automatically restore overwritten EEPROMClemens Ladisch3-0/+48
If the EEPROM was partially overwritten (which seems to happen before the OS is booted), restore its entire contents by deducing it from the remaining information. This does not have any effect on the Linux driver, which works even with incomplete information in the EEPROM, but it makes other drivers work again. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: handle cards with broken EEPROMClemens Ladisch6-93/+179
Under as yet unknown circumstances, the first word of the sound card's EEPROM gets overwritten. When this has happened, we cannot rely on the subsystem IDs that the kernel reads from the PCI configuration registers. Instead, we read the IDs directly from the EEPROM and do the ID matching manually. Because the model-specific driver cannot determine the model before calling oxygen_pci_probe(), that function now gets a get_model() callback as parameter. The customizing of the model structure, which was formerly done by the probe() callback, also has moved into get_model(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: use static driver nameClemens Ladisch1-2/+3
When allocating resources, use a fixed name instead of reading it from the model structure. This allows us to allocate the resources before the actual model is known. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: allocate model_data dynamicallyClemens Ladisch1-3/+11
Allocate the model-specific data dynamically instead of including it in the memory block of the card structure. This will allow us to determine the actual model after the card creation. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: make the owner module a parameter of the probe functionClemens Ladisch5-10/+6
Move the owner field out of the oxygen_model structure and make it a parameter of oxygen_pci_probe(), because the actual owner module does not depend on the card model. Furthermore, moving it out of the model structure allows us to create the card structure before the actual model is known. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19Merge branch 'topic/snd_card_new-err' into topic/oxygenTakashi Iwai104-479/+560
2009-02-19sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"Clemens Ladisch1-13/+4
This reverts commit 7e86c0e6850504ec9516b953f316a47277825e33 ("do not overwrite EEPROM on Xonar D2/D2X") because it did not actually help with the problem. More user reports show that the overwriting of the EEPROM is not triggered by using this driver but by installing Linux, and that the installation of any other operating system (even one without any CMI8788 driver) has the same effect. In other words, the presence of this driver does not have any effect on the occurrence of the error. (So far, the available evidence seems to point to a BIOS bug.) Furthermore, it turns out that the EEPROM chip is protected against stray write commands by the command format and by requiring a separate write-enable command, so the error scenario in the previous commit (that SPI writes can be misinterpreted as an EEPROM write command) is not even theoretically possible. The mixer control that was removed as a consequence of the previous commit can only be partially emulated in userspace, which also means it cannot be seen be the in-kernel OSS API emulation, so it is better to revert that change. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-18ALSA: jack - Use card->shortname for input nameTakashi Iwai1-1/+1
Currently the jack layer refers to card->longname as a part of its input device name string. However, longname is often really long and way too ugly as an identifier, such as, "HDA Intel at 0xf8400000 irq 21". This patch changes the code to use card->shortname instead. The shortname string contains usually the h/w vendor and product names but without messy I/O port or IRQ numbers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-13Merge branch 'for-linus' of ↵Linus Torvalds12-42/+89
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Only register AC97 bus if it's not done already ALSA: hda - Add snd_hda_multi_out_dig_cleanup() ALSA: hda - Add missing terminator in slave dig-out array ALSA: hda - Change HP dv7 (103c:30f4) quirk from hp-m4 to hp-dv5 model ALSA: hda - Register (new) devices at reconfig ALSA: mtpav - Fix initial value for input hwport ALSA: hda - add id for Intel IbexPeak integrated HDMI codec ALSA: hda - compute checksum in HDMI audio infoframe ALSA: hda - enable HDMI audio pin out at module loading time ALSA: hda - allow multi-channel HDMI audio playback when ELD is not present ASoC: Update SDP3430 machine driver for snd_soc_card ALSA: hda - Add quirk for Asus z37e (1043:8284) sound: Remove OSSlib stuff from linux/soundcard.h ASoC: WM8990: Fix kcontrol's private value use in put callback ASoC: TLV320AIC3X: Fix kcontrol's private value use in put callback
2009-02-13Merge branch 'fix/asoc' into for-linusTakashi Iwai4-8/+16
2009-02-13Merge branch 'fix/hda' into for-linusTakashi Iwai7-33/+71
2009-02-13ASoC: Only register AC97 bus if it's not done alreadyMark Brown1-1/+4
ASoC supports both explicit codec drivers for AC97 devices and a simple driver which uses the standard ALSA AC97 framework for codec support. When used with the generic AC97 codec support that will provide the ad hoc AC97 device for drivers like touchscreens to attach to so the core shouldn't do so. Reported-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-13ALSA: hda - Add snd_hda_multi_out_dig_cleanup()Takashi Iwai4-2/+32
Added the helper function snd_hda_multi_out_dig_cleanup() to clean up the digital outputs with multi setup. This call is needed in cases the codec supports multiple digital outputs as slaves. Otherwise the slave widgets aren't properly cleaned up. For a single digital output (e.g. in patch_conexant.c), this call isn't needed. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-13ALSA: hda - Add missing terminator in slave dig-out arrayTakashi Iwai1-2/+2
Added the missing terminator for ad1989b_slave_dig_outs[]. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-13ALSA: hda - Change HP dv7 (103c:30f4) quirk from hp-m4 to hp-dv5 modelHerton Ronaldo Krzesinski1-1/+1
Change HP dv7 quirk: although reported to work with hp-m4 model (https://bugzilla.novell.com/show_bug.cgi?id=445321), the original report doesn't contain info about testing of internal microphone. Recently I received a report about internal mic not working (https://qa.mandriva.com/show_bug.cgi?id=44855#c193), this must be related with the forced line in on pin 0x0e done with hp-m4 model. Thus change the current quirk from STAC_HP_M4 to STAC_HP_DV5, later reported to be fixed on a provided kernel with this change (https://qa.mandriva.com/show_bug.cgi?id=44855#c196). Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-12ALSA: hda - Register (new) devices at reconfigTakashi Iwai1-1/+1
The devices that have been newly added during reconfig must be registered. Otherwise they won't be visible to user-space. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-12ALSA: mtpav - Fix initial value for input hwportTakashi Iwai1-1/+2
Fix the initial value for input hwport. The old value (-1) may cause Oops when an realtime MIDI byte is received before the input port is explicitly given. Instead, now it's set to the broadcasting as default. Tested-by: Holger Dehnhardt <dehnhardt@ahdehnhardt.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-11ALSA: hda - add id for Intel IbexPeak integrated HDMI codecWu Fengguang1-0/+2
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-11ALSA: hda - compute checksum in HDMI audio infoframeWu Fengguang1-0/+5
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-11ALSA: hda - enable HDMI audio pin out at module loading timeWu Fengguang1-23/+19
We found that enabling/disabling HDMI audio pin out at stream start/stop time will kill the leading 500ms or so sound samples. Avoid this by enabling pin out once and for ever at module loading time. The leading ~500ms audio samples will still be lost when switching from X-channel playback to Y-channel playback where X != Y. However there's no much we can do about it: the audio infoframe has to change and it looks like either G45 or YAMAHA requires some time to switch the configuration. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-11ALSA: hda - allow multi-channel HDMI audio playback when ELD is not presentWu Fengguang1-4/+8
The YAMAHA AV-X1800 requires audio infoframe to include speaker-channel mapping to play >2 channel HDMI audio. In theory that mapping should be derived from its speaker configurations contained in its ELD. However we currently cannot get ELD in console before the KMS functionalities are ready. This is a more or less general issue at least in the near future. As a workaround, we propose to allow playback of mult-channel audio when ELD is not available. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-10ASoC: Update SDP3430 machine driver for snd_soc_cardLopez Cruz, Misael1-2/+2
This patch replaces "snd_soc_machine" structure by "snd_soc_card" in SP3430 driver. This change is needed in SDP3430 driver to reflect changes introduced by "ASoC: Rename snd_soc_card to snd_soc_machine" patch (875065491fba8eb13219f16c36e79a6fb4e15c68). Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-10ALSA: hda - Add quirk for Asus z37e (1043:8284)Mackenzie Morgan1-0/+1
Added a quirk for Asus Z37E for fixing suspend/hibernation problem. Reference: https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/25896 http://launchpadlibrarian.net/17053575/0001-Add-quirk-for-ASUS-Z37E-to-make-sound-audible-afte.patch https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=4282 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-10[ARM] AACI: timeout will reach -1Roel Kluin1-3/+3
With a postfix decrement the timeout will reach -1 rather than 0, so the warning will not be issued. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-06Merge branch 'fix/usb-audio' into for-linusTakashi Iwai1-0/+1
2009-02-06Merge branch 'fix/hda' into for-linusTakashi Iwai3-4/+10
2009-02-06ALSA: hda - Add missing COEF initialization for ALC887Takashi Iwai1-0/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-06ALSA: hda - Add missing initialization for ALC272Takashi Iwai1-0/+1
ALC272 needs EAPD for speaker outputs as well as other similar ALC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-06ASoC: WM8990: Fix kcontrol's private value use in put callbackJarkko Nikula1-1/+3
Function wm899x_outpga_put_volsw_vu misuses the kcontrol's private value by still accessing it as bitfields even SOC_SINGLE_VALUE constructs it as a pointer into struct soc_mixer_control after the commit 4eaa9819dc08d7bfd1065ce530e31b18a119dcaf. This is very similar fix than fix to TLV320AIC3X codec made by Eero Nurkkala <ext-eero.nurkkala@nokia.com>. This fix is compile tested only. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-06ASoC: TLV320AIC3X: Fix kcontrol's private value use in put callbackEero Nurkkala1-4/+7
Function snd_soc_dapm_put_volsw_aic3x misuses the kcontrol's private value by still accessing it as bitfields even SOC_SINGLE_VALUE constructs it as a pointer into struct soc_mixer_control after the commit 4eaa9819dc08d7bfd1065ce530e31b18a119dcaf. This was causing arbitrary register writes when touching the controls defined with SOC_DAPM_SINGLE_AIC3X. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-06sound: usb-audio: handle wMaxPacketSize for FIXED_ENDPOINT devicesClemens Ladisch1-0/+1
For audio devices that do not have proper audio descriptors (e.g., Edirol UA-20), we use hardcoded parameters from our quirks list. However, we must still read the maximum packet size from the standard endpoint descriptor; otherwise, we might use packets that are too big and therefore rejected by the USB core. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: hda - Fix misc workqueue issuesTakashi Iwai2-4/+6
Some fixes regarding snd-hda-intel workqueue: - Use create_singlethread_workqueue() instead of create_workqueue() as per-CPU work isn't required. - Allocate workq name string properly - Renamed the workq name to "hd-audio*" to be more obvious. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-04ALSA: hda - Add quirk for FSC Amilo Xi2550Takashi Iwai1-0/+2
Added model=fujisu-pi2515 for FSC Amilo Xi2550 with ALC883 codec. Refernece: Novell bnc#450979 https://bugzilla.novell.com/show_bug.cgi?id=450979 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-04Merge branch 'fix/asoc' into for-linusTakashi Iwai5-7/+7
2009-02-04Merge branch 'fix/hda' into for-linusTakashi Iwai3-1/+5
2009-02-04ALSA: pcm_oss: AFMT_S24_LE is set twice in return valueRoel Kluin1-1/+1
AFMT_S24_LE is set twice in return value vi sound/core/oss/pcm_oss.c +640 #define AFMT_S24_LE 0x00008000 #define AFMT_S24_BE 0x00010000 Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-03ALSA: ASoC: email - update email addresses.Liam Girdwood4-5/+4
This just updates my email address on some drivers I'd forgotten in a previous patch. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-02OMAP: ASoC: Fix spinlock misuse in omap-pcm.cEero Nurkkala1-2/+3
omap_pcm_trigger is called also in interrupt context so CPU flags must be restored when returning. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-02ALSA: hda - No widget selection for volume knob widgets in proc outputTakashi Iwai1-1/+2
Volume-knob widgets have no widget selection although they have widget connections. Thus, the connection list in the proc output shouldn't contain the selection (*). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-31ALSA: hda - Add support of iMac 24 AluminiumMark Eggleston1-0/+1
Added the support for 24" Aluminium iMac (106b:3e00) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-31ALSA: alsa: time reaches -1, tested 0Roel Kluin1-1/+1
With a postfix decrement time will reach -1 rather than 0, so the warning will not be issued. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-30ALSA: hda - Add quirk for another HP dv5 modelTakashi Iwai1-0/+2
Added model=hp-dv5 for another HP dv5 model with AMD chip (103c:3600) Reference: kernel bug#12440 http://bugzilla.kernel.org/show_bug.cgi?id=12440 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-29Merge branch 'fix/hda' into for-linusTakashi Iwai3-2/+15
2009-01-29Merge branch 'fix/asoc' into for-linusTakashi Iwai2-1/+12
2009-01-29ASoC: OMAP: Initialize XCCR and RCCR registers in McBSP DAI driverMisael Lopez Cruz1-0/+4
This patch explicitly initializes McBSP Transmit Configuration Control Register (XCCR) and Receive Configuration Control Register (RCCR) to their reset values. Reset values are 26 ns of DX delay and Transmit DMA disabled for XCCR register; receive full cycle mode enabled and Receive DMA disabled for RCCR register. This patch requires a counterpart in OMAP McBSP driver before to apply it. The required changes in McBSP were sent and approved in linux-omap mailing list and patch is going upstream (commit 3127f8f8595a064b3f1a1837fea2177902589ac3 from linux-omap-2.6 tree). Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> [ jarkko.nikula@nokia.com: Commit id for counterpart patch corrected ] Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-12 16:34:24 +0000