summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2009-11-03Merge branch 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linuxLinus Torvalds1-2/+15
* 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux: ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c ARM: S3C2440: mini2440: Fix spare warnings ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test ARM: S3C: Fix adc function exports ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set ARM: S3C24XX: Introduce S3C2442B CPU ARM: S3C24XX: Define a macro to avoid compilation error ARM: S3C: Add info for supporting circular DMA buffers ARM: S3C64XX: Set rate of crystal mux ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value
2009-11-02Merge branch 'for-linus' of ↵Linus Torvalds17-76/+162
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Don't check invalid HP pin ALSA: dummy - Fix descriptions of pcm_substreams parameter ALSA: pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (sound) ALSA: hda: Use quirk mask for Dell Inspiron Mini9/Vostro A90 using ALC268 sound: via82xx: deactivate DXS controls of inactive streams ALSA: snd-usb-caiaq: Bump version number to 1.3.20 ALSA: snd-usb-caiaq: Lock on stream start/unpause ALSA: snd-usb-caiaq: Missing lock around use of buffer positions ALSA: sound/parisc: Move dereference after NULL test ALSA: sound: Move dereference after NULL test and drop unnecessary NULL tests ALSA: hda_intel: Add the Linux device ID for NVIDIA HDA controller ALSA: pcsp - Fix nforce workaround ALSA: SND_CS5535AUDIO: Remove the X86 platform dependency ASoC: Amstrad Delta: add info about the line discipline requirement to Kconfig help text ASoC: Fix possible codec_dai->ops NULL pointer problems ALSA: hda - Fix capture source checks for ALC662/663 codecs ASoC: Serialize access to dapm_power_widgets()
2009-11-02Merge branch 'fix/hda' into for-linusTakashi Iwai2-2/+6
2009-11-02Merge branch 'fix/asoc' into for-linusTakashi Iwai3-5/+21
2009-11-02ALSA: hda - Don't check invalid HP pinTakashi Iwai1-0/+2
alc_automute_pin() might be called even if any HP pin is defined, and it will result in verbs with NID=0. This patch adds a check for the validity of HP widget before issuing any verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-02ALSA: dummy - Fix descriptions of pcm_substreams parameterTakashi Iwai1-1/+1
Now up to 128 substreams are supported. Reported-by: Adrian Bridgett <adrian@smop.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-02ALSA: pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (sound)Dominik Brodowski2-18/+24
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of requiring manual settings of PCMCIA_DEBUG. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-02ALSA: hda: Use quirk mask for Dell Inspiron Mini9/Vostro A90 using ALC268Daniel T Chen1-1/+2
BugLink: https://bugs.launchpad.net/bugs/368629 We should use a quirk mask for these Dell Inspiron Mini9s and Vostro A90s, as the model=dell quirk appears to enable audio on them. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30sound: via82xx: deactivate DXS controls of inactive streamsClemens Ladisch1-7/+52
Activate the DXS volume controls only when the corresponding stream is being used. This makes the behaviour consistent with the other drivers that have per-stream volume controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30ALSA: snd-usb-caiaq: Bump version number to 1.3.20Mark Hills1-1/+1
Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30ALSA: snd-usb-caiaq: Lock on stream start/unpauseMark Hills1-0/+4
Fix a bug which can result in white noise from the driver after stream start or unpause. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30ALSA: snd-usb-caiaq: Missing lock around use of buffer positionsMark Hills1-3/+9
Fix a race which causes snd_pcm_update_hw_ptr_pos() to report a bug. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30ALSA: sound/parisc: Move dereference after NULL testJulia Lawall1-1/+5
If the NULL test on h is needed in snd_harmony_mixer_init, then the dereference should be after the NULL test. Actually, there is a sequence of calls: snd_harmony_create, then snd_harmony_pcm_init, and then snd_harmony_mixer_init. snd_harmony_create initializes h, but may indeed leave it as NULL. There was no NULL test at the beginning of snd_harmony_pcm_init, so I have added one. The NULL test in snd_harmony_mixer_init is then not necessary, but in case the ordering of the calls changes, I have left it, and moved the dereference after it. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30ALSA: sound: Move dereference after NULL test and drop unnecessary NULL testsJulia Lawall3-5/+4
In pcm.c, if the NULL test on pcm is needed, then the dereference should be after the NULL test. In dummy.c and ali5451.c, the context of the calls to snd_card_dummy_new_mixer and snd_ali_free_voice show that dummy and pvoice, respectively cannot be NULL. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30ALSA: hda_intel: Add the Linux device ID for NVIDIA HDA controllerpeer chen1-0/+1
Add the generic device ID for NVIDIA HDA controller. Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30ALSA: pcsp - Fix nforce workaroundStas Sergeev2-32/+35
The attached patch fixes the problems introduced in this commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=eea0579fc85e64e9f05361d5aacf496fe7a151aa - Fix nForce workaround by honouring the pointer_update var - Revert "ns" to u64, as per the hrtimer API - Revert to the zero-delay timer startup, since I can't reproduce any problem with it (please, give me the hint!) Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30ALSA: SND_CS5535AUDIO: Remove the X86 platform dependencyWu Zhangjin1-1/+0
SND_CS5535AUDIO is available on Loongson(MIPS compatible) family machines, and checked it with ARCH=x86_64, no relative compiling warnings & errors, so, remove the platform dependency directly. Reported-by: rixed@happyleptic.org Acked-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-28ARM: S3C: Add info for supporting circular DMA buffersBen Dooks1-2/+15
The S3C64XX DMA implementation will work a lot better with the ability to enqueue circular buffers as the hardware can do it's own linked-list management. Add a function s3c_dma_has_circular() to show that the system can do this and a flag for the channel. Update the s3c24xx/s3c64xx I2S DMA code to deal with this. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Mark Brown <broonie@@opensource.wolfsonmicro.com>
2009-10-27powerpc: Minor cleanup to sound/ppc/KconfigKumar Gala1-1/+1
We can replace PPC32 || PPC64 as a dependancy with just PPC as all powerpc platforms (32-bit and 64-bit) define PPC now. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-25ASoC: Amstrad Delta: add info about the line discipline requirement to ↵Janusz Krzysztofik1-1/+12
Kconfig help text I thought it could be usefull to add some information on how to get the device fully supported by loading a line discipline on the modem line. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-19ASoC: Fix possible codec_dai->ops NULL pointer problemsBarry Song1-3/+8
Some codec DAIs like stac9766, wm9712, wm9713, ad1980 don't register themselves then it loses to the chance to be given a null_dai_ops in snd_soc_register_dai if they have no ops. When functions like soc_pcm_open, soc_pcm_hw_params etc. access the ops field in these DAIs, panic will happen. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-14ALSA: hda - Fix capture source checks for ALC662/663 codecsTakashi Iwai1-1/+1
The ALC662/663 parser calls wrongly alc880_auto_create_input_ctls() to check the capture source selections. This should be alc882, instead. Reference: Novell bnc#546918 http://bugzilla.novell.com/show_bug.cgi?id=546918 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13Merge branch 'fix/hda' into for-linusTakashi Iwai3-8/+54
2009-10-13ALSA: hda - Allow all formats as default for Nvidia HDMITakashi Iwai1-1/+1
In the commit f0613d5752d8f7d1d02e6d40947f38877fdf9c90 ALSA: hda - Add full rates/formats support for Nvidia HDMI the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot to clear before commit. Let's enable all formats/rates as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13ALSA: aaci: ARM1176 aaci-pl041 AC97 register read timeoutPhilby John1-0/+1
After a reboot on an ARM1176 which amounts to a softreset, it has been noted that the ALSA driver does not get registered and the probe fails with the error "aaci-pl041 fpga:04: ac97 read back fail". In the process of reading from a register the SL1TxBusy bit is set indicating that the transceiver is busy and remains so until the default timeout occurs. Set the Power down register 0x26 to an arbitrary value as specified in the PL041 manual (page: 3-18) so that AACISL1TX/AACISL2TX registers take their default state. Signed-off-by: Philby John <pjohn@in.mvista.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13ALSA: hda - Fix volume-knob setup for Dell laptops with STAC9228Takashi Iwai1-1/+11
The volume-knob widget needs to be set with 0x7f instead of 0xff for Dell laptops with STAC9228 codec, too, like the previous commit. Reference: Novell bnc#545013 http://bugzilla.novell.com/show_bug.cgi?id=545013 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13ALSA: hda - Fix mute sound with STAC9227/9228 codecsTakashi Iwai1-0/+17
On FSC laptops, the sound gets muted gradually when the volume is chnaged. This is due to the wrong volume-knob widget setup. The delta bit (bit 7) shouldn't be set for these devices. This patch adds a new quirk to set the value 0x7f to the widget 0x24 instead of 0xff. Reference: Novell bnc#546006 http://bugzilla.novell.com/show_bug.cgi?id=546006 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13ASoC: Serialize access to dapm_power_widgets()Eero Nurkkala1-1/+1
Access to damp_power_widgets() is assumed to be single-threaded. Concurrent accesses to dapm_power_widgets() may result in unpredictable behavior. Calls from: close_delayed_work() soc_codec_close() soc_pcm_prepare() soc_suspend() soc_resume_deferred() to snd_soc_dapm_stream_event() do not have the codec->mutex taken to cover the call to dapm_power_widgets(). Thus, take the mutex in these paths also to assure single-threaded use of dapm_power_widgets(). Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-13ALSA: bt87x - Add a whitelist for Pinnacle PCTV (11bd:0012)Takashi Iwai1-0/+2
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13ALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.cTakashi Iwai1-1/+1
ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to the recent changes. Simply increase the array size to avoid the overflow. Reported-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: ice1724 - Make call to set hw params succeed on ESI Juli@David Henningsson1-1/+1
If two streams are started immediately after one another (such as a playback and a recording stream), the call to set hw params fails with EBUSY. This patch makes the call succeed, so playback and recording will work properly. Signed-off-by: David Henningsson <launchpad.web@epost.diwic.se> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-10ALSA: ice1724: Fix surround on Chaintech AV-710Robert Hancock1-3/+5
Fix the num_total_dacs setting for Chaintech AV710. The existing comment that only PSDOUT0 is connected is correct, but since the card is using packed AC97 mode to send 6 channels to the codec, num_total_dacs should be set to 6 and not 2. This allows 6-channel surround to work. Also clarify a comment regarding the additional WM8728 codec on this card (it's connected to the SPDIF output and always receives the same data). Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-09ALSA: hda - Add full rates/formats support for Nvidia HDMITakashi Iwai1-6/+25
Allow Nvidia HDMI to support more possible sample rates and formats. At best, the really supported rates and formats should be determined together with the negotiation with the HDMI receiver, but it's currently not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3 standard in this regard). As a compromise, we enable all bits, assuming that all recent devices do support such rates/formats. Tested-by: Alan Alan <alanwww1@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08Merge branch 'fix/misc' into for-linusTakashi Iwai4-21/+42
2009-10-08Merge branch 'fix/hda' into for-linusTakashi Iwai1-22/+67
2009-10-08ALSA: ice1724: increase SPDIF and independent stereo buffer sizesRobert Hancock1-2/+2
Increase the default and maximum PCM buffer prellocation size for ice1724's SPDIF and independent stereo pair outputs to 256K, which is the hardware's maximum supported size. This allows a reduction in interrupt rate and potentially power usage when an application is not latency-critical. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08ALSA: opl3: circular locking in the snd_opl3_note_on() and snd_opl3_note_off()Krzysztof Helt1-8/+20
Fix following circular locking in the opl3 driver. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc3 #87 ------------------------------------------------------- swapper/0 is trying to acquire lock: (&opl3->voice_lock){..-...}, at: [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] but task is already holding lock: (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&opl3->sys_timer_lock){..-...}: [<c02461d5>] validate_chain+0xa25/0x1040 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca75046>] snd_opl3_note_on+0x686/0x790 [snd_opl3_synth] [<cca68912>] snd_midi_process_event+0x322/0x590 [snd_seq_midi_emul] [<cca74245>] snd_opl3_synth_event_input+0x15/0x20 [snd_opl3_synth] [<cca4dcc0>] snd_seq_deliver_single_event+0x100/0x200 [snd_seq] [<cca4de07>] snd_seq_deliver_event+0x47/0x1f0 [snd_seq] [<cca4e50b>] snd_seq_dispatch_event+0x3b/0x140 [snd_seq] [<cca5008c>] snd_seq_check_queue+0x10c/0x120 [snd_seq] [<cca5037b>] snd_seq_enqueue_event+0x6b/0xe0 [snd_seq] [<cca4e0fd>] snd_seq_client_enqueue_event+0xdd/0x100 [snd_seq] [<cca4eb7a>] snd_seq_write+0xea/0x190 [snd_seq] [<c02827b6>] vfs_write+0x96/0x160 [<c0282c9d>] sys_write+0x3d/0x70 [<c0202c45>] syscall_call+0x7/0xb -> #0 (&opl3->voice_lock){..-...}: [<c02467e6>] validate_chain+0x1036/0x1040 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth] [<c022ac46>] run_timer_softirq+0x166/0x1e0 [<c02269e8>] __do_softirq+0x78/0x110 [<c0226ac6>] do_softirq+0x46/0x50 [<c0226e26>] irq_exit+0x36/0x40 [<c0204bd2>] do_IRQ+0x42/0xb0 [<c020328e>] common_interrupt+0x2e/0x40 [<c021092f>] apm_cpu_idle+0x10f/0x290 [<c0201b11>] cpu_idle+0x21/0x40 [<c04443cd>] rest_init+0x4d/0x60 [<c055c835>] start_kernel+0x235/0x280 [<c055c066>] i386_start_kernel+0x66/0x70 other info that might help us debug this: 2 locks held by swapper/0: #0: (&opl3->tlist){+.-...}, at: [<c022abd0>] run_timer_softirq+0xf0/0x1e0 #1: (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth] stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.32-rc3 #87 Call Trace: [<c0245188>] print_circular_bug+0xc8/0xd0 [<c02467e6>] validate_chain+0x1036/0x1040 [<c0247f14>] ? check_usage_forwards+0x54/0xd0 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<c044c307>] ? _spin_lock_irqsave+0x47/0x60 [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth] [<c022ac46>] run_timer_softirq+0x166/0x1e0 [<c022abd0>] ? run_timer_softirq+0xf0/0x1e0 [<cca75150>] ? snd_opl3_timer_func+0x0/0xc0 [snd_opl3_synth] [<c02269e8>] __do_softirq+0x78/0x110 [<c044c0fd>] ? _spin_unlock+0x1d/0x20 [<c025915f>] ? handle_level_irq+0xaf/0xe0 [<c0226ac6>] do_softirq+0x46/0x50 [<c0226e26>] irq_exit+0x36/0x40 [<c0204bd2>] do_IRQ+0x42/0xb0 [<c024463c>] ? trace_hardirqs_on_caller+0x12c/0x180 [<c020328e>] common_interrupt+0x2e/0x40 [<c0208d88>] ? default_idle+0x38/0x50 [<c021092f>] apm_cpu_idle+0x10f/0x290 [<c0201b11>] cpu_idle+0x21/0x40 [<c04443cd>] rest_init+0x4d/0x60 [<c055c835>] start_kernel+0x235/0x280 [<c055c210>] ? unknown_bootoption+0x0/0x210 [<c055c066>] i386_start_kernel+0x66/0x70 Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08ALSA: ICE1712/24 - Change the Multi Track Peak control (level meters) from ↵Pavel Hofman2-2/+2
MIXER to PCM type * PLEASE NOTE - this change requires the corresponding update of envy24control for ice1712 - kind of an ABI change. * The "Multi Track Peak" control is read-only level meters indicator. * The control is VERY confusing to most users since it is currently displayed in regular mixers. E.g. alsamixer ignores its read-only status and allows changing the levels with keys which makes no sense. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-07ALSA: hda - Fix yet another auto-mic bug in ALC268Takashi Iwai1-1/+3
Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w design different from other siblings), it needs to call fixup_automic_adc() explicitly to set up the auto-mic routing. Otherwise the indices for int/ext mics aren't set properly. Reference: Novell bnc#544899 http://bugzilla.novell.com/show_bug.cgi?id=544899 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06Merge branch 'upstream/wm8350' into for-2.6.32Mark Brown1-2/+2
2009-10-06ASoC: WM8350 capture PGA mutes are invertedMark Brown1-2/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-10-06ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSIMark Brown1-8/+0
These should be handled via set_tdm_slot() now and cause build failures as-is. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06sound: via82xx: move DXS volume controls to PCM interfaceClemens Ladisch1-9/+18
The "VIA DXS" controls are actually volume controls that apply to the four PCM substreams, so we better indicate this connection by moving the controls to the PCM interface. Commit b452e08e73c0e3dbb0be82130217be4b7084299e in 2.6.30 broke the restoring of these volumes by "alsactl restore" that most distributions use; the renaming in this patch cures that regression by preventing alsactl from applying the old, wrong volume levels to the new controls. http://bugzilla.kernel.org/show_bug.cgi?id=14151 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=532613 Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id()Takashi Iwai1-3/+8
alc_subsystem_id() tries to pick up a headphone pin if not configured, but this caused side-effects as the problem in commit 15870f05e90a365f8022da416e713be0c5024e2f. This patch fixes the driver behavior to pick up invalid HP pins; at least, the pins that are listed as the primary outputs aren't taken any more. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06Merge branch 'for-2.6.32' of ↵Mark Brown2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.32
2009-10-06ALSA: hda - Add a workaround for ASUS A7KTakashi Iwai1-11/+48
ASUS A7K needs additional GPIO1 bit setup; it has to be cleared. Added a new fixup hook for this laptop so that it works as is. Refernece: Novell bnc#494309 http://bugzilla.novell.com/show_bug.cgi?id=494309 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-05ALSA: hda - Fix invalid initializations for ALC861 auto modeTakashi Iwai1-7/+8
The recent auto-parser doesn't work for machines with a single output with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets the hp_pins[0] while it's listed in line_outs[0]. This ends up with the doubled initialization of the same mixer widget, and it mutes the DAC route because hp_pins has no DAC assigned. To fix this problem, just check spec->autocfg.hp_outs and speaker_outs so that they are really detected pins. Reference: Novell bnc#544161 http://bugzilla.novell.com/show_bug.cgi?id=544161 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-03Merge branch 'for-linus' of ↵Linus Torvalds23-256/+511
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (21 commits) ALSA: usb - Use strlcat() correctly ALSA: Fix invalid __exit in sound/mips/*.c ALSA: hda - Fix / improve ALC66x parser ALSA: ctxfi: Swapped SURROUND-SIDE mute sound: Make keywest_driver static ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs ASoC: fix kconfig order of Blackfin drivers ALSA: hda - Added quirk to enable sound on Toshiba NB200 ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2 ALSA: Don't assume i2c device probing always succeeds ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350P ALSA: echoaudio - Re-enable the line-out control for the Mia card ALSA: hda - Resurrect input-source mixer of ALC268 model=acer ALSA: hda - Analog Devices AD1984A add HP Touchsmart model ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelist ALSA: hda - CD-audio sound for hda-intel conexant benq laptop ASoC: DaVinci: Correct McASP FIFO initialization ASoC: Davinci: Fix race with cpu_dai->dma_data ASoC: DaVinci: Fix divide by zero error during 1st execution ...
2009-10-03Merge branch 'fix/hda' into for-linusTakashi Iwai5-94/+322
2009-10-03Merge branch 'fix/asoc' into for-linusTakashi Iwai16-165/+155
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 13:45:27 +0000