summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2018-10-02ALSA: firewire-lib: add PCM rules to obsolete PCM constraints based on LCM ↵Takashi Sakamoto1-7/+71
of SYT_INTERVAL In blocking mode of IEC 61883-1/6, when one isochronous packet includes data for events, the data is for the same number of events as SYT_INTERVAL decided according to sampling transmission frequency (SFC). IEC 61883-1/6 engine of ALSA firewire stack applies constraints of period and buffer size of PCM intermediate buffer of PCM substream. At present, this constraint is designed to round the size up/down to 32 frames. This value comes from the least common multiple (LCM) of SYT_INTERVAL. Although this looks to work well, in lower sampling rate, applications are not allowed to set size of period quite near period time constraint (at present 5 msec per period). This commit adds PCM rules for period/buffer size and rate to obsoletes the constraints based on LCM. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR exit commandsConnor McAdams1-0/+33
This patch adds exit operations for the Sound Blaster ZxR. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR 600 ohm gain controlConnor McAdams1-2/+42
This patch adds a control for 600 ohm gain on the Sound Blaster ZxR. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Remove input select enum for ZxRConnor McAdams1-1/+14
This patch removes the input select control for the ZxR, as it only has one input option, rear microphone. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR input/output select commandsConnor McAdams1-0/+25
This patch adds commands for selecting input and output on the Sound Blaster ZxR. The ZxR has no front panel header, and has line-in on the separate daughter board, so it only does rear-mic. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR DSP post-download commandsConnor McAdams1-13/+24
This patch adds commands for setting up the ZxR after the DSP is downloaded. The ZxR already shares most of the post-download commands from the regular Sound Blaster Z. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR init commandsConnor McAdams1-1/+13
This patch adds init commands for the main Sound Blaster ZxR card. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add DBpro hda_codec_opsConnor McAdams1-0/+100
This patch adds separate hda_codec_ops for the DBPro daughter board, as it behaves more like a generic HDA codec than the other ca0132 cards, despite having a ca0132 on board. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR pincfgConnor McAdams1-0/+50
This patch adds a pincfg for the ZxR, and defines which pins are used for both. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR quirks + new quirk check functionConnor McAdams1-0/+28
This patch adds quirk ID's for the ZxR and it's daughter board, the DBPro. It also adds a function for determining the quirk for each board through HDA subsytem ID's instead of PCI subsystem ID's. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Fix surround sound with output effectsConnor McAdams1-5/+14
This patch fixes an issue where if surround sound was the selected output and output effects were enabled, the sound wasn't sent to all channels correctly. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Fix AE-5 control typeConnor McAdams1-2/+2
This patch corrects the control type of the additional AE-5 controls added in a previous patch from HDA_INPUT to HDA_OUTPUT. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda: Fix mismatch for register mask and value in ext controller.Keyon Jie1-8/+14
E.g. for snd_hdac_ext_bus_link_power_up(), we should set mask to be AZX_MLCTL_SPA(it was 0), and AZX_MLCTL_SPA as value to power up it, here correct it and several similar mismatches. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02x86/cpu: Sanitize FAM6_ATOM namingPeter Zijlstra1-1/+1
Going primarily by: https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors with additional information gleaned from other related pages; notably: - Bonnell shrink was called Saltwell - Moorefield is the Merriefield refresh which makes it Airmont The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE for i in `git grep -l FAM6_ATOM` ; do sed -i -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g' \ -e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/' \ -e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g' \ -e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g' \ -e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g' \ -e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g' \ -e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g' \ -e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g' \ -e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g' \ -e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g' \ -e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: dave.hansen@linux.intel.com Cc: len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-27ASoC: qcom: qdsp6: remove duplicated includeYueHaibing2-2/+0
Remove duplicated includes linux/of_platform.h and linux/wait.h Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-27ASoC: wm9712: fix unused variable warningArnd Bergmann1-1/+2
The 'ret' variable is now only used in an #ifdef, and causes a warning if it is declared outside of that block: sound/soc/codecs/wm9712.c: In function 'wm9712_soc_probe': sound/soc/codecs/wm9712.c:641:6: error: unused variable 'ret' [-Werror=unused-variable] Fixes: 2ed1a8e0ce8d ("ASoC: wm9712: add ac97 new bus support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-27ASoC: atmel: add SND_SOC_I2C_AND_SPI dependencyArnd Bergmann1-0/+1
Selecting SND_SOC_WM8731 is only allowed when all its dependencies are already there: WARNING: unmet direct dependencies detected for SND_SOC_WM8731 Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=m] Selected by [y]: - SND_SOC_MIKROE_PROTO [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_ATMEL_SOC [=y] && OF [=y] Selected by [m]: - SND_AT91_SOC_SAM9X5_WM8731 [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_ATMEL_SOC [=y] && (ARCH_AT91 [=y] || COMPILE_TEST [=y]) && ATMEL_SSC [=y] && SND_SOC_I2C_AND_SPI [=m] - SND_SOC_ALL_CODECS [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && COMPILE_TEST [=y] && SND_SOC_I2C_AND_SPI [=m] Fixes: a45f8853a5f9 ("ASoC: Add driver for PROTO Audio CODEC (with a WM8731)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-27ASoC: pxa: avoid AC97_BUS build warningArnd Bergmann1-0/+8
Selecting AC97_BUS_NEW from SND_PXA2XX_SOC_AC97 leads to a Kconfig warning if any other driver selects AC97_BUS: WARNING: unmet direct dependencies detected for AC97_BUS_COMPAT Depends on [n]: SOUND [=y] && !UML && SND [=y] && AC97_BUS_NEW [=y] && !AC97_BUS [=y] Selected by [y]: - SND_SOC_WM9713 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && AC97_BUS_NEW [=y] I don't know if that combination is supposed to work. Assuming it is not, this adds a dependency on all users for PXA to avoids the combination. Fixes: 1c8bc7b3de5e ("ASoC: pxa: switch to new ac97 bus support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-27ASoC: soc-utils: Rename dummy_dma_ops to snd_dummy_dma_opsMatthias Kaehlcke1-2/+2
The symbols 'dummy_dma_ops' is declared with different data types by sound/soc/soc-utils.c and arch/arm64/include/asm/dma-mapping.h. This leads to conflicts when soc-utils.c (indirectly) includes dma-mapping.h: sound/soc/soc-utils.c:282:33: error: conflicting types for 'dummy_dma_ops' static const struct snd_pcm_ops dummy_dma_ops = { ^ ... arch/arm64/include/asm/dma-mapping.h:27:33: note: previous declaration of 'dummy_dma_ops' was here extern const struct dma_map_ops dummy_dma_ops; ^ Rename the symbol in soc-utils.c to 'snd_dummy_dma_ops' to avoid the conflict. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-25ASoC: max98088: add OF supportAndreas Färber1-0/+10
MAX98088 is an older version of the MAX98089 device. Signed-off-by: Andreas Färber <afaerber@suse.de> [m.felsch@pengutronix.de: add CONFIG_OF compile switch] [m.felsch@pengutronix.de: adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-25ASoC: cs4265: Add a MIC pre. routeMatt Flax1-2/+3
The cs4265 driver is missing a microphone preamp enable. This patch enables/disables the microphone preamp when mic selection is made using the kcontrol. Signed-off-by: Matt Flax <flatmax@flatmax.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-21ASoC: add for_each_component_dais() macroKuninori Morimoto1-5/+6
To be more readable code, this patch adds new for_each_component_dais() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-21ASoC: add for_each_component() macroKuninori Morimoto1-10/+14
To be more readable code, this patch adds new for_each_component() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-21ASoC: rsnd: fixup SSI clock during suspend/resume modesDmytro Prokopchuk2-11/+10
Prepare <-> Cleanup functions pair has balanced calls. But in case of suspend mode no call to rsnd_soc_dai_shutdown() function, so cleanup isn't called. OTOH during resume mode function rsnd_soc_dai_prepare() is called, but calling rsnd_ssi_prepare() is skipped (rsnd_status_update() returns zero, bacause was not cleanup before). We need to call rsnd_ssi_prepare(), because it enables SSI clocks by calling rsnd_ssi_master_clk_start(). This patch allows to call prepare/cleanup functions always. Signed-off-by: Dmytro Prokopchuk <dmytro.prokopchuk@globallogic.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> [kuninori: adjusted to upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-21ASoC: qcom: qdsp6: remove duplicated include from q6adm.czhong jiang1-9/+8
We include wait.h twice in q6adm.c. it is unnecessary. hence remove it. Further, order the include files as alphabet. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-21ASoC: tidyup for_each_card_prelinks() dai_linkKuninori Morimoto3-11/+11
commit 7fe072b4df5d0 ("ASoC: add for_each_card_prelinks() macro") added new for_each_card_prelinks() macro, but it had typo. This patch fixup it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: rt5663: Remove the boost volume in the beginning of playbackOder Chiou1-1/+6
The patch removes the boost volume in the beginning of playback while the DAC volume set to lower. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: add for_each_dpcm_be() macroKuninori Morimoto5-30/+28
To be more readable code, this patch adds new for_each_dpcm_be() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: add for_each_dpcm_fe() macroKuninori Morimoto1-3/+3
To be more readable code, this patch adds new for_each_dpcm_fe() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: add for_each_comp_order() macroKuninori Morimoto1-12/+6
To be more readable code, this patch adds new for_each_comp_order() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: add for_each_card_components() macroKuninori Morimoto5-10/+11
To be more readable code, this patch adds new for_each_card_components() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: add for_each_card_rtds() macroKuninori Morimoto5-34/+34
To be more readable code, this patch adds new for_each_card_rtds() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: add for_each_card_links() macroKuninori Morimoto1-4/+4
To be more readable code, this patch adds new for_each_card_links() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: add for_each_card_prelinks() macroKuninori Morimoto15-66/+69
To be more readable code, this patch adds new for_each_card_prelinks() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: rename for_each_rtd_codec_dai_reverse to rollbackKuninori Morimoto1-2/+2
commit 0b7990e38971 ("ASoC: add for_each_rtd_codec_dai() macro") added for_each_rtd_codec_dai_reverse(). but _rollback() is better naming than _reverse(). This patch rename it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: convert for_each_rtd_codec_dai() for missing partKuninori Morimoto1-16/+15
commit 0b7990e38971 ("ASoC: add for_each_rtd_codec_dai() macro") added for_each_rtd_codec_dai(), but it didn't convert few loop which is not using "rtd". This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ALSA: hda/ca0132 - Add AE-5 exit functionConnor McAdams1-0/+28
This patch adds exit commands for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 specific controlsConnor McAdams1-1/+238
This patch adds controls for the AE-5's headphone gain setting, and the DAC's interpolation filter setting. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add input selection commands for AE-5Connor McAdams1-6/+29
This patch adds the input selection commands for the Sound BlasterX AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add output set commands for AE-5Connor McAdams1-10/+70
This patch adds output selection commands for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Clean up ca0132_alt_out_selectConnor McAdams1-51/+69
This patch cleans up ca0132_alt_out_select by moving the card specific output commands into a separate function. As more cards are added, the function ca0132_alt_out_select is going to get more bloated with these, so moving into a separate function tries to keep that from happening. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add DSP setup functions for AE-5Connor McAdams1-0/+215
This patch adds DSP setup functions for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Merge post-dsp functions + cleanupConnor McAdams1-96/+75
This patch cleans up some of the formatting of the post-dsp load setup functions, and also merges some of the sub functions into individual ones. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Change firmware name and usageConnor McAdams1-5/+7
The Recon3D, AE-5, Z and ZxR all share the same firmware file. Rename this from the specific "ctefx-sbz.bin" to "ctefx-desktop.bin" and set the AE-5 and Recon3D to use it as well. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 regular init setupConnor McAdams1-0/+12
This patch adds AE-5 specific stuff to the ca0132_alt_init function. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 pre-init and ca0113 functionsConnor McAdams1-23/+134
This patch adds AE-5 pre-init functions that happen before the main ca0132_alt_init, and gives functions related to the ca0113 a ca0113 prefix instead of ca0132. It also adds functions to write to the 8051's SFRs, and to write the special ca0113 commands for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Change ca0132_mmio_init for AE-5Connor McAdams1-6/+55
This patch adds the unique writes for the AE-5 on startup to ca0132_mmio_init. The other cards share some addresses written to, but use different values. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Set AE-5 bools and select mixerConnor McAdams1-1/+10
This patch sets the bool values for the AE-5, as well as selects the mixer it will use. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add pincfg for AE-5Connor McAdams1-13/+60
This patch adds the pincfg for the Sound BlasterX AE-5, and cleans up the function it's assigned in. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add quirk for Sound BlasterX AE-5Connor McAdams1-0/+2
This patch adds the PCI subsys ID quirk for the Sound BlasterX AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 18:16:24 +0000