summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2019-05-17Merge tag 'sound-fix-5.2-rc1' of ↵Linus Torvalds3-27/+79
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few HD-audio fixes, most of which are specific to Realtek codecs" * tag 'sound-fix-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix for Lenovo B50-70 inverted internal microphone bug ALSA: hda: Fix race between creating and refreshing sysfs entries ALSA: hda/realtek - Corrected fixup for System76 Gazelle (gaze14) ALSA: hda/realtek - Avoid superfluous COEF EAPD setups ALSA: hda/realtek - Fixup headphone noise via runtime suspend
2019-05-16Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk framework updates from Stephen Boyd: "One more patch to remove io.h from clk-provider.h. We used to need this include when we had clk_readl() and clk_writel(), but those are gone now so this patch pushes the dependency out to the users of clk-provider.h" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Remove io.h from clk-provider.h
2019-05-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds5-5/+5
Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
2019-05-15Merge branch 'fixes' into arm/socOlof Johansson51-271/+750
Merge in a few pending fixes from pre-5.1 that didn't get sent in: MAINTAINERS: update arch/arm/mach-davinci ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1 ARM: dts: imx6q-logicpd: Reduce inrush current on start ARM: dts: imx: Fix the AR803X phy-mode ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply ARM: sunxi: fix a leaked reference by adding missing of_node_put ARM: sunxi: fix a leaked reference by adding missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd1-0/+1
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-14ALSA: hda/realtek - Fix for Lenovo B50-70 inverted internal microphone bugMichał Wadowski1-1/+1
Add patch for realtek codec in Lenovo B50-70 that fixes inverted internal microphone channel. Device IdeaPad Y410P has the same PCI SSID as Lenovo B50-70, but first one is about fix the noise and it didn't seem help in a later kernel version. So I replaced IdeaPad Y410P device description with B50-70 and apply inverted microphone fix. Bugzilla: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1524215 Signed-off-by: Michał Wadowski <wadosm@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-13ALSA: hda: Fix race between creating and refreshing sysfs entriesAmadeusz Sławiński2-0/+10
hda_widget_sysfs_reinit() can free underlying codec->widgets structure on which widget_tree_create() operates. Add locking to prevent such issues from happening. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110382 Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-10ALSA: hda/realtek - Corrected fixup for System76 Gazelle (gaze14)Jeremy Soller1-1/+3
A mistake was made in the identification of the four variants of the System76 Gazelle (gaze14). This patch corrects the PCI ID of the 17-inch, GTX 1660 Ti variant from 0x8560 to 0x8551. This patch also adds the correct fixups for the 15-inch and 17-inch GTX 1650 variants with PCI IDs 0x8560 and 0x8561. Tests were done on all four variants ensuring full audio capability. Fixes: 80a5052db751 ("ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14)") Signed-off-by: Jeremy Soller <jeremy@system76.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-10ALSA: hda/realtek - Avoid superfluous COEF EAPD setupsTakashi Iwai1-1/+30
Realtek codec driver applied the COEF setups to change the EAPD control to the default mode (i.e. control by EPAD verbs) at the init callback. It works, but this is too excessive at the same time, since it's called at each runtime PM resume. That is, the initialization should be done only once after the probe. One may think that moving this to the probe should be OK, but no -- there is a catch; when a system resumes from S4 (hibernation), we need to re-initialize this again manually, because it's out of regcache restoration. This patch addresses the issue by introducing alc_pre_init() function that performs such a task. This is called from each codec probe function, and it's called from the resume callback conditionally only from S4 resume. Reported-and-tested-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-10ALSA: hda/realtek - Fixup headphone noise via runtime suspendKailang Yang1-24/+35
Dell platform with ALC298. system enter to runtime suspend. Headphone had noise. Let Headset Mic not shutup will solve this issue. [ Fixed minor coding style issues by tiwai ] Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-09Merge tag 'sound-5.2-rc1' of ↵Linus Torvalds275-3069/+27566
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The most significant changes at this cycle are the Sound Open Firmware support from Intel for the common DSP framework along with its support for Intel platforms. It's a door opened to a real "free" firmware (in the sense of FOSS), and other parties show interests in it. In addition to SOF, we've got a bunch of updates and fixes as usual. Some highlights are below. ALSA core: - Cleanups and fixes in ALSA timer code to cover some races spotted by syzkaller - Cleanups and fixes in ALSA sequencer code to cover some races, again unsurprisingly, spotted by syzkaller - Optimize the common page allocation helper with alloc_pages_exact() ASoC: - Add SOF core support, as well as Intel SOF platform support - Generic card driver improvements: support for MCLK/sample rate ratio and pin switches - A big set of improvements to TLV320AIC32x4 drivers - New drivers for Freescale audio mixers, several Intel machines, several Mediatek machines, Meson G12A, Spreadtrum compressed audio and DMA devices HD-audio: - A few Realtek codec fixes for reducing pop noises - Quirks for Chromebooks - Workaround for faulty connection report on AMD/Nvidia HDMI Others: - A quirk for Focusrite Scarlett Solo USB-audio - Add support for MOTU 8pre FireWire - 24bit sample format support in aloop - GUS patch format support (finally, over a decade) in native emux synth code" * tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits) ASoC: SOF: Fix unused variable warnings ALSA: line6: toneport: Fix broken usage of timer for delayed execution ALSA: aica: Fix a long-time build breakage ALSA: hda/realtek - Support low power consumption for ALC256 ASoC: stm32: i2s: update pcm hardware constraints ASoC: codec: hdac_hdmi: no checking monitor in hw_params ASoC: mediatek: mt6358: save PGA for mixer control ASoC: mediatek: mt6358: save output volume for mixer controls ASoC: mediatek: mt6358: initialize setting when ramping volume ASoC: SOF: core: fix undefined nocodec reference ASoC: SOF: xtensa: fix undefined references ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14) ALSA: hda/intel: add CometLake PCI IDs ALSA: hda/realtek - Support low power consumption for ALC295 ASoC: rockchip: Fix an uninitialized variable compile warning ASoC: SOF: Fix a compile warning with CONFIG_PCI=n ASoC: da7219: Fix a compile warning at CONFIG_COMMON_CLK=n ASoC: sound/soc/sof/: fix kconfig dependency warning ASoC: stm32: spdifrx: change trace level on iec control ...
2019-05-09Merge tag 'asoc-v5.2-5' of ↵Takashi Iwai4-62/+87
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.2 A bunch of driver specific fixes that came in since the initial pull request for v5.2, mainly warning fixes for the newly added Sound Open Firmware code which people appeared to only start looking at after I'd sent the pull request.
2019-05-08Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-6/+12
Pull drm updates from Dave Airlie: "This has two exciting community drivers for ARM Mali accelerators. Since ARM has never been open source friendly on the GPU side of the house, the community has had to create open source drivers for the Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx series. Well done to all involved and hopefully this will help ARM head in the right direction. There is also now the ability if you don't have any of the legacy drivers enabled (pre-KMS) to remove all the pre-KMS support code from the core drm, this saves 10% or so in codesize on my machine. i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo moves out of staging. There are also some rcar-du patches which crossover with media tree but all should be acked by Mauro. Summary: uapi changes: - Colorspace connector property - fourcc - new YUV formts - timeline sync objects initially merged - expose FB_DAMAGE_CLIPS to atomic userspace new drivers: - vboxvideo: moved out of staging - aspeed: ASPEED SoC BMC chip display support - lima: ARM Mali4xx GPU acceleration driver support - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support core: - component helper docs - unplugging fixes - devm device init - MIPI/DSI rate control - shmem backed gem objects - connector, display_info, edid_quirks cleanups - dma_buf fence chain support - 64-bit dma-fence seqno comparison fixes - move initial fb config code to core - gem fence array helpers for Lima - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size) - lease fixes ttm: - unified DRM_FILE_PAGE_OFFSET handling - Account for kernel allocations in kernel zone only panel: - OSD070T1718-19TS panel support - panel-tpo-td028ttec1 backlight support - Ronbo RB070D30 MIPI/DSI - Feiyang FY07024DI26A30-D MIPI-DSI panel - Rocktech jh057n00900 MIPI-DSI panel i915: - Comet Lake (Gen9) PCI IDs - Updated Icelake PCI IDs - Elkhartlake (Gen11) support - DP MST property addtions - plane and watermark fixes - Icelake port sync and VEBOX disable fixes - struct_mutex usage reduction - Icelake gamma fix - GuC reset fixes - make mmap more asynchronous - sound display power well race fixes - DDI/MIPI-DSI clocks for Icelake - Icelake RPS frequency changing support - Icelake workarounds amdgpu: - Use HMM for userptr - vega20 experimental smu11 support - RAS support for vega20 - BACO support for vega12 + fixes for vega20 - reworked IH interrupt handling - amdkfd RAS support - Freesync improvements - initial timeline sync object support - DC Z ordering fixes - NV12 planes support - colorspace properties for planes= - eDP opts if eDP already initialized nouveau: - misc fixes etnaviv: - misc fixes msm: - GPU zap shader support expansion - robustness ABI addition exynos: - Logging cleanups tegra: - Shared reset fix - CPU cache maintenance fix cirrus: - driver rewritten using simple helpers meson: - G12A support vmwgfx: - Resource dirtying management improvements - Userspace logging improvements virtio: - PRIME fixes rockchip: - rk3066 hdmi support sun4i: - DSI burst mode support vc4: - load tracker to detect underflow v3d: - v3d v4.2 support malidp: - initial Mali D71 support in komeda driver tfp410: - omap related improvement omapdrm: - drm bridge/panel support - drop some omap specific panels rcar-du: - Display writeback support" * tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits) drm/msm/a6xx: No zap shader is not an error drm/cma-helper: Fix drm_gem_cma_free_object() drm: Fix timestamp docs for variable refresh properties. drm/komeda: Mark the local functions as static drm/komeda: Fixed warning: Function parameter or member not described drm/komeda: Expose bus_width to Komeda-CORE drm/komeda: Add sysfs attribute: core_id and config_id drm: add non-desktop quirk for Valve HMDs drm/panfrost: Show stored feature registers drm/panfrost: Don't scream about deferred probe drm/panfrost: Disable PM on probe failure drm/panfrost: Set DMA masks earlier drm/panfrost: Add sanity checks to submit IOCTL drm/etnaviv: initialize idle mask before querying the HW db drm: introduce a capability flag for syncobj timeline support drm: report consistent errors when checking syncobj capibility drm/nouveau/nouveau: forward error generated while resuming objects tree drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully" drm/nouveau/i2c: Disable i2c bus access after ->fini() drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition ...
2019-05-09ASoC: SOF: Fix unused variable warningsTakashi Iwai1-0/+2
The recent fix for the build fix caused a couple of unused variable compiler warnings when CONFIG_SND_SOC_SOF_NOCODEC isn't set: sound/soc/sof/core.c:263:6: warning: unused variable ‘ret’ [-Wunused-variable] sound/soc/sof/core.c:262:28: warning: unused variable ‘machine’ [-Wunused-variable] Fix them by adding another ifdef. Fixes: ce38a75089f7 ("ASoC: SOF: core: fix undefined nocodec reference") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08Merge tag 'media/v5.1-2' of ↵Linus Torvalds11-4/+461
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - remove the deprecated Zoran driver from staging - new I2C driver: ST MIPID02 CSI-2 camera bridge - new platform driver: Amlogic Meson AO CEC G12A Controller - add support for USB audio via the media controller - au0828 driver is now supported via the media controller on both on media and on usbaudio - new kernel test for the media device allocator - add support for stateless decoder at vicodec driver - lots of other driver improvements fixes and cleanups * tag 'media/v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (218 commits) media: dt-bindings: aspeed-video: Add missing memory-region property media: platform: Aspeed: Make reserved memory optional media: platform: Aspeed: Remove use of reset line media: stm32-dcmi: return appropriate error codes during probe media: vsp1: Add support for missing 16-bit RGB555 formats media: vsp1: Add support for missing 16-bit RGB444 formats media: vsp1: Add support for missing 32-bit RGB formats media: v4l: Add definitions for missing 16-bit RGB555 formats media: v4l: Add definitions for missing 16-bit RGB4444 formats media: v4l: Add definitions for missing 32-bit RGB formats media: zoran: remove deprecated driver media: MAINTAINERS: Update AO CEC with ao-cec-g12a driver media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver media: dt-bindings: media: meson-ao-cec: Add G12A AO-CEC-B Compatible media: cros-ec-cec: decrement HDMI device refcount media: seco-cec: decrement HDMI device refcount media: tegra_cec: use new cec_notifier_parse_hdmi_phandle helper media: stih_cec: use new cec_notifier_parse_hdmi_phandle helper media: s5p_cec: use new cec_notifier_parse_hdmi_phandle helper media: meson: ao-cec: use new cec_notifier_parse_hdmi_phandle helper ...
2019-05-08ALSA: line6: toneport: Fix broken usage of timer for delayed executionTakashi Iwai1-7/+9
The line6 toneport driver has code for some delayed initialization, and this hits the kernel Oops because mutex and other sleepable functions are used in the timer callback. Fix the abuse by a delayed work instead so that everything works gracefully. Reported-by: syzbot+a07d0142e74fdd595cfb@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-08ALSA: aica: Fix a long-time build breakageTakashi Iwai1-10/+4
The build of aica sound driver has been broken since the timer API conversion and some code rewrite. This patch fixes the breakage by using the common substream field, as well as a bit cleaning up wrt the timer handling in the code. Fixes: d522bb6a105f ("ALSA: sh: aica: Convert timers to use timer_setup()") Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-08ALSA: hda/realtek - Support low power consumption for ALC256Kailang Yang1-9/+24
Remove hp_pin = 0 return. Add the default pin 0x21 as headphone. Supported low power consumption, it must do depop procedure when headset jack was plugged or unplugged. So, alc256_init() and alc256_shutup() must run delay when headset jack was plugged or unplugged. If depop procedure not run with delay, it will have a chance to let power consumption raise high. [ NOTE: this is a quite quite similar change for ALC295 by commit d3ba58bb8959 ("ALSA: hda/realtek - Support low power consumption for ALC295"), but applied to ALC256 codec instead -- tiwai ] Fixes: 8983eb602af5 ("ALSA: hda/realtek - Move to ACT_INIT state") Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-08Merge tag 'asoc-v5.2-2' of ↵Takashi Iwai10-39/+43
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.2 A bunch of driver specific fixes that came in since the initial pull request for v5.2, mainly warning fixes for the newly added Sound Open Firmware code which people appeared to only start looking at after I'd sent the pull request.
2019-05-08ASoC: stm32: i2s: update pcm hardware constraintsOlivier Moysan1-1/+2
- Set period minimum size. Ensure at least 5ms period up to 48kHz/16 bits to prevent underrun/overrun. - Remove MDMA constraints on period maximum size and set period maximum to half the buffer maximum size. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: codec: hdac_hdmi: no checking monitor in hw_paramsLibin Yang1-13/+0
Some userspace apps, like pulseaudio, may call open, hw_params, prepare to judge whether the pcm is ready or not. Current hdac_hdmi will return -ENODEV if monitor is not connected, which will cause the apps believe the pcm is not ready. Actually PCM for hdmi is ready, even the monitor is not connected. This patch removes the check of monitor presence in hw_params, just like what the legacy HD-Audio driver does. Signed-off-by: Libin Yang <libin.yang@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: mediatek: mt6358: save PGA for mixer controlTzung-Bi Shih1-4/+29
mt6358_amic_disable() resets PGA to 0. Save the gain settings from mixer control and restore them when using the microphone. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: mediatek: mt6358: save output volume for mixer controlsTzung-Bi Shih1-40/+51
Output volume settings from mixer controls would be lost. Imagine that "Headphone Volume" has set to -10dB via amixer: - in mtk_hp_enable() - hp_store_gain() saves the volume setting -10dB from regmap_read() to ana_gain[AUDIO_ANALOG_VOLUME_HPOUTL] - headset_volume_ramp() ramps up from -10dB to -10dB - in mtk_hp_disable() - headset_volume_ramp() ramps down from -10dB to -40dB Next time in mtk_hp_enable(), hp_store_gain() would save -40dB but not -10dB. As a result, headset_volume_ramp() would ramp from -10dB to -40dB (which is mute). Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: mediatek: mt6358: initialize setting when ramping volumeTzung-Bi Shih1-4/+3
Mt6358 ramps up from the smallest volume (i.e. -10dB) to target dB when opening and ramps down from target dB to mute (i.e. -40dB) when closing. If target is equal to -10dB when opening, headset_volume_ramp() simply leaves current setting (which may not be -10dB) unchanged. Execute the loop at least once to initialize the setting to the starting point (i.e. from). Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: SOF: core: fix undefined nocodec referencePierre-Louis Bossart1-5/+5
The existing code mistakenly uses IS_ENABLED in C code instead of as in conditional compilation, leading to the following error: ld: sound/soc/sof/core.o: in function `sof_machine_check': sound/soc/sof/core.c:279: undefined reference to `sof_nocodec_setup' Fix by using #if !IS_ENABLED() Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: SOF: xtensa: fix undefined referencesPierre-Louis Bossart1-1/+1
The SND_SOC_INTEL_COMMON Kconfig was removed months ago from SOF Kconfig files but is still selected instead of the correct SND_SOC_SOF_INTEL_COMMON kconfig which does select xtensa stuff, leading to the following errors. ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x120): undefined reference to `sof_xtensa_arch_ops' ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x180): undefined reference to `sof_xtensa_arch_ops' ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x1e0): undefined reference to `sof_xtensa_arch_ops' Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properlyTakashi Iwai1-3/+7
This fixes a compile warning below by properly handling the error code from sof_get_ctrl_copy_params(): include/linux/kernel.h:843:43: warning: 'sparams.pl_size' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/soc/sof/ipc.c:639:34: note: 'sparams.pl_size' was declared here The function returns an error before setting sparams.pl_size, so it'd assign an uninitialized value at a later point. Fixes: 53e0c72d98ba ("ASoC: SOF: Add support for IPC IO between DSP and Host") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14)Jeremy Soller1-0/+2
On the System76 Gazelle (gaze14), there is a headset microphone input attached to 0x1a that does not have a jack detect. In order to get it working, the pin configuration needs to be set correctly, and the ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is identical to the patch already applied for the System76 Darter Pro (darp5). Signed-off-by: Jeremy Soller <jeremy@system76.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-07Merge tag 'leds-for-5.2-rc1' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "LED core fixes and improvements: - avoid races with workqueue - Kconfig: pedantic cleanup - small fixes for Flash class description leds-lt3593: - remove unneeded assignment in lt3593_led_probe - drop pdata handling code leds-blinkm: - clean up double assignment to data->i2c_addr leds-pca955x, leds-pca963x: - revert ACPI support, as it turned out that there is no evidence of officially registered ACPI IDs for these devices. - make use of device property API leds-as3645a: - switch to fwnode property API LED related addition to ACPI documentation: - document how to refer to LEDs from remote nodes LED related fix to ALSA line6/toneport driver: - avoid polluting led_* namespace And lm3532 driver relocation from MFD to LED subsystem, accompanied by various improvements and optimizations; it entails also a change in omap4-droid4-xt894.dts: - leds: lm3532: Introduce the lm3532 LED driver - mfd: ti-lmu: Remove LM3532 backlight driver references - ARM: dts: omap4-droid4: Update backlight dt properties - dt: lm3532: Add lm3532 dt doc and update ti_lmu doc" * tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: avoid races with workqueue ALSA: line6: Avoid polluting led_* namespace leds: lm3532: Introduce the lm3532 LED driver mfd: ti-lmu: Remove LM3532 backlight driver references ARM: dts: omap4-droid4: Update backlight dt properties dt: lm3532: Add lm3532 dt doc and update ti_lmu doc leds: Small fixes for Flash class description leds: blinkm: clean up double assignment to data->i2c_addr leds: pca963x: Make use of device property API leds: pca955x: Make use of device property API leds: lt3593: Remove unneeded assignment in lt3593_led_probe leds: lt3593: drop pdata handling code leds: pca955x: Revert "Add ACPI support" leds: pca963x: Revert "Add ACPI support" drivers: leds: Kconfig: pedantic cleanups ACPI: Document how to refer to LEDs from remote nodes leds: as3645a: Switch to fwnode property API
2019-05-07ALSA: hda/intel: add CometLake PCI IDsPierre-Louis Bossart1-0/+6
Add PCI IDs for LP and H skews. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-07Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linuxLinus Torvalds4-4/+4
Pull stream_open conversion from Kirill Smelkov: - remove unnecessary double nonseekable_open from drivers/char/dtlk.c as noticed by Pavel Machek while reviewing nonseekable_open -> stream_open mass conversion. - the mass conversion patch promised in commit 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") and is automatically generated by running $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. More details on this in the patch. - finally, change VFS to pass ppos=NULL into .read/.write for files that declare themselves streams. It was suggested by Rasmus Villemoes and makes sure that if ppos starts to be erroneously used in a stream file, such bug won't go unnoticed and will produce an oops instead of creating illusion of position change being taken into account. Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to use stream_open()" that will be hopefully coming via FUSE tree, because fs/fuse/ uses new-style .read_iter/.write_iter, and for these accessors position is still passed as non-pointer kiocb.ki_pos . * tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux: vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files *: convert stream-like files from nonseekable_open -> stream_open dtlk: remove double call to nonseekable_open
2019-05-07Merge tag 'spi-v5.2' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "One small feature was added this release but the bulk of the diffstat and the changelog comes from the fact that several older drivers got some fairly hefty reworks and a couple of new drivers were added: - Support for detailed control of timing around chip selects from Sowjanya Komatineni. - A big set of fixes and imrovements for the Tegra114 driver from Sowjanya Komatineni. - A big simplification of the GPIO driver from Andrey Smirnov. - DMA support and fixes for the Freescale LPSPI driver from Clark Wang. - Fixes and optimizations for the bcm2835aux from Martin Sparl. - New drivers for Mediatek MT7621 (graduated from staging) and Zynq QSPI" [ This is a so-called "evil merge" that additionally removes a warning due to an unused variable 'i' introduced by commit 1dfbf334f123 ("spi: ep93xx: Convert to use CS GPIO descriptors") - Linus ] * tag 'spi-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (127 commits) spi: rspi: Fix handling of QSPI code when transmit and receive spi: atmel-quadspi: fix crash while suspending spi: stm32: return the get_irq error spi: tegra114: fix PIO transfer spi: pxa2xx: fix SCR (divisor) calculation spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-select spi: ep93xx: Convert to use CS GPIO descriptors spi: AD ASoC: declare missing of table spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl spi: stm32-qspi: manage the get_irq error case spi/spi-bcm2835: Split transfers that exceed DLEN spi: expand mode support dt-bindings: spi: spi-mt65xx: add support for MT8516 spi: pxa2xx: Add support for Intel Comet Lake spi/trace: Cap buffer contents at 64 bytes spi: Release spi_res after finalizing message spi: Remove warning in spi_split_transfers_maxsize() spi: Remove one needless transfer speed fall back case spi: sh-msiof: Document r8a77470 bindings spi: pxa2xx: use a module softdep for dw_dmac ...
2019-05-07Merge tag 'regulator-v5.2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "In terms of big picture changes this has been an extremely quiet release however there's a lot of changes and a fairly big diffstat thanks to a bunch of small fixes, mainly coming from Axel Lin. Thanks to his work this release removes code overall even though we've added a new (albiet fairly small) driver. Notable things: - A fix for a long standing issue with locking on error interrupts from Steve Twiss. - A new driver for ST Microelectonics STM32 PWR" * tag 'regulator-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (134 commits) regulator: core: simplify return value on suported_voltage regulator: da9xxx: Switch to SPDX identifier regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc regulator: pv880x0: Switch to SPDX identifier regulator: hi6xxx: Switch to SPDX identifier regulator: vexpress: Switch to SPDX identifier regulator: vexpress: Get rid of struct vexpress_regulator regulator: sky81452: Switch to SPDX identifier regulator: sky81452: Constify sky81452_reg_ops regulator: sy8106a: Get rid of struct sy8106a regulator: core: do not report EPROBE_DEFER as error but as debug regulator: mt63xx: Switch to SPDX identifier regulator: fan53555: Switch to SPDX identifier regulator: fan53555: Clean up unneeded fields from struct fan53555_device_info regulator: ltc3589: Switch to SPDX identifier regulator: ltc3589: Get rid of struct ltc3589_regulator regulator: ltc3589: Convert to use simplified DT parsing ...
2019-05-07ALSA: hda/realtek - Support low power consumption for ALC295Kailang Yang1-15/+31
Enter to close more power control widgets at suspend. Remove hp_pin check. Add the default pin 0x21 as headphone. Supported low power consumption, it must do depop procedure when headset jack was plugged or unplugged. So, alc225_init() and alc225_shutup() must run delay when headset jack was plugged or unplugged. If depop procedure not run with delay, it will have a chance to let power consumption raise high. [ A few compile fixes by tiwai ] Fixes: 8983eb602af5 ("ALSA: hda/realtek - Move to ACT_INIT state") Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-06Merge tag 'acpi-5.2-rc1' of ↵Linus Torvalds6-27/+33
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These rearrange the ACPI documentation by converting it to the .rst format and splitting it into clear categories (admin guide, driver API, firmware guide), switch over multiple users of a problematic library function to a new better one, update the ACPICA code in the kernel to a new upstream release, fix a few issues, improve power device management diagnostics and do some cleanups. Specifics: - Convert the ACPI documentation in the kernel source tree to the .rst format and split it into the admin guide, driver API and firmware guide parts (Changbin Du). - Add a PRP0001 usage example to the ACPI documentation (Thomas Preston). - Switch over the users of the acpi_dev_get_first_match_name() library function which turned out to be problematic to a new, better one called acpi_dev_get_first_match_dev() (Andy Shevchenko, YueHaibing). - Update the ACPICA code in the kernel to upstream release 20190405 including: * Null pointer dereference check in acpi_ns_delete_node() (Erik Schmauss). * Multiple macro and function name changes (Bob Moore). * Predefined operation region name fix (Erik Schmauss). - Fix hibernation issue on systems using the Baytrail and Cherrytrail Intel SoCs introduced during the 4.20 development cycle (Hans de Goede). - Add Sony VPCEH3U1E to the backlight quirk list (Zhang Rui). - Fix button handling during system resume (Zhang Rui). - Add a device PM diagnostic message (Rafael Wysocki). - Clean up the code, comments and white space in multiple places (Bjorn Helgaas, Gustavo Silva, Kefeng Wang)" * tag 'acpi-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: ACPI: move video_extension.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move ssdt-overlays.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move lpit.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move cppc_sysfs.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move apei/einj.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move apei/output_format.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move aml-debugger.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move method-tracing.txt to firmware-guide/acpi and convert to rsST Documentation: ACPI: move debug.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move dsd/data-node-references.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move dsd/graph.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move acpi-lid.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move i2c-muxes.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move dsdt-override.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move initrd_table_override.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move method-customizing.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move gpio-properties.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move DSD-properties-rules.txt to firmware-guide/acpi and covert to reST Documentation: ACPI: move scan_handlers.txt to driver-api/acpi and convert to reST Documentation: ACPI: move linuxized-acpica.txt to driver-api/acpi and convert to reST ...
2019-05-07ASoC: rockchip: Fix an uninitialized variable compile warningTakashi Iwai1-1/+1
Paper over a trivial case leading to an uninitialized variable compile warning: sound/soc/rockchip/rockchip_pdm.c:179:3: warning: ‘clk_out’ may be used uninitialized in this function [-Wmaybe-uninitialized] Fixes: 624e8e00acaf ("ASoC: rockchip: pdm: fixup pdm fractional div") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-07ASoC: SOF: Fix a compile warning with CONFIG_PCI=nTakashi Iwai1-1/+1
A trivial fix for the randconfig build error: sound/soc/sof/ops.c:20:6: warning: ‘ret’ is used uninitialized in this function [-Wuninitialized] Fixes: d1d95fcb63e3 ("ASoC: SOF: Add DSP HW abstraction operations") Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-07ASoC: da7219: Fix a compile warning at CONFIG_COMMON_CLK=nTakashi Iwai1-0/+2
A trivial fix for the randconfig build error: sound/soc/codecs/da7219.c:2366:6: warning: unused variable ‘i’ [-Wunused-variable] Fixes: d90ba6c8b53e ("ASoC: da7219: Expose BCLK and WCLK control through CCF") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-07ASoC: sound/soc/sof/: fix kconfig dependency warningRandy Dunlap1-1/+1
Fix kconfig warning for unmet dependency for IOSF_MBI when PCI is not set/enabled. Fixes this warning: WARNING: unmet direct dependencies detected for IOSF_MBI Depends on [n]: PCI [=n] Selected by [y]: - SND_SOC_SOF_ACPI [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] && (ACPI [=y] || COMPILE_TEST [=n]) && X86 [=y] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-06Merge tag 'arm64-mmiowb' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull mmiowb removal from Will Deacon: "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb()) Remove mmiowb() from the kernel memory barrier API and instead, for architectures that need it, hide the barrier inside spin_unlock() when MMIO has been performed inside the critical section. The only relatively recent changes have been addressing review comments on the documentation, which is in a much better shape thanks to the efforts of Ben and Ingo. I was initially planning to split this into two pull requests so that you could run the coccinelle script yourself, however it's been plain sailing in linux-next so I've just included the whole lot here to keep things simple" * tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits) docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section arch: Remove dummy mmiowb() definitions from arch code net/ethernet/silan/sc92031: Remove stale comment about mmiowb() i40iw: Redefine i40iw_mmiowb() to do nothing scsi/qla1280: Remove stale comment about mmiowb() drivers: Remove explicit invocations of mmiowb() drivers: Remove useless trailing comments from mmiowb() invocations Documentation: Kill all references to mmiowb() riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() m68k/io: Remove useless definition of mmiowb() nds32/io: Remove useless definition of mmiowb() x86/io: Remove useless definition of mmiowb() arm64/io: Remove useless definition of mmiowb() ARM/io: Remove useless definition of mmiowb() mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors ...
2019-05-06ASoC: stm32: spdifrx: change trace level on iec controlOlivier Moysan1-1/+1
Change trace level to debug to avoid spurious messages. Return quietly when accessing iec958 control, while no S/PDIF signal is available. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov4-4/+4
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-05-06ASoC: stm32: spdifrx: update pcm hardware constraintsOlivier Moysan1-1/+2
- Set period minimum size. Ensure at least 5ms period up to 48kHz/16 bits to prevent underrun/overrun. - Remove MDMA constraints on period maximum size and set period maximum to half the buffer maximum size. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-06ASoC: max98090: Fix restore of DAPM MuxesJon Hunter1-6/+6
The max98090 driver defines 3 DAPM muxes; one for the right line output (LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux) and one for the right headphone mixer source (MIXHPRSEL Mux). The same bit is used for the mux as well as the DAPM enable, and although the mux can be correctly configured, after playback has completed, the mux will be reset during the disable phase. This is preventing the state of these muxes from being saved and restored correctly on system reboot. Fix this by marking these muxes as SND_SOC_NOPM. Note this has been verified this on the Tegra124 Nyan Big which features the MAX98090 codec. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-05-06ASoC: RT5677-SPI: Disable 16Bit SPI TransfersCurtis Malainey1-19/+16
The current algorithm allows 3 types of transfers, 16bit, 32bit and burst. According to Realtek, 16bit transfers have a special restriction in that it is restricted to the memory region of 0x18020000 ~ 0x18021000. This region is the memory location of the I2C registers. The current algorithm does not uphold this restriction and therefore fails to complete writes. Since this has been broken for some time it likely no one is using it. Better to simply disable the 16 bit writes. This will allow users to properly load firmware over SPI without data corruption. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Reviewed-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-05-06ALSA: hda/hdmi - Consider eld_valid when reporting jack eventHui Wang1-2/+4
On the machines with AMD GPU or Nvidia GPU, we often meet this issue: after s3, there are 4 HDMI/DP audio devices in the gnome-sound-setting even there is no any monitors plugged. When this problem happens, we check the /proc/asound/cardX/eld#N.M, we will find the monitor_present=1, eld_valid=0. The root cause is BIOS or GPU driver makes the PRESENCE valid even no monitor plugged, and of course the driver will not get the valid eld_data subsequently. In this situation, we should not report the jack_plugged event, to do so, let us change the function hdmi_present_sense_via_verbs(). In this function, it reads the pin_sense via snd_hda_pin_sense(), after calling this function, the jack_dirty is 0, and before exiting via_verbs(), we change the shadow pin_sense according to both monitor_present and eld_valid, then in the snd_hda_jack_report_sync(), since the jack_dirty is still 0, it will report jack event according to this modified shadow pin_sense. After this change, the driver will not report Jack_is_plugged event through hdmi_present_sense_via_verbs() if monitor_present is 1 and eld_valid is 0. Signed-off-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-06ALSA: hda/hdmi - Read the pin sense from register when repollingHui Wang1-0/+5
The driver will check the monitor presence when resuming from suspend, starting poll or interrupt triggers. In these 3 situations, the jack_dirty will be set to 1 first, then the hda_jack.c reads the pin_sense from register, after reading the register, the jack_dirty will be set to 0. But hdmi_repoll_work() is enabled in these 3 situations, It will read the pin_sense a couple of times subsequently, since the jack_dirty is 0 now, It does not read the register anymore, instead it uses the shadow pin_sense which is read at the first time. It is meaningless to check the shadow pin_sense a couple of times, we need to read the register to check the real plugging state, so we set the jack_dirty to 1 in the hdmi_repoll_work(). Signed-off-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-06Merge tag 'asoc-v5.2' of ↵Takashi Iwai234-2634/+26911
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.2 This is a pretty huge set of changes, it's been a pretty active release all round but the big thing with this release is the Sound Open Firmware changes from Intel, providing another DSP framework for use with the DSPs in their SoCs. This one works with the firmware of the same name which is free software (unlike the previous DSP firmwares and framework) and there has been some interest in adoption by other systems already so hopefully we will see adoption by other vendors in the future. Other highlights include: - Support for MCLK/sample rate ratio setting in the generic cards. - Support for pin switches in the generic cards. - A big set of improvements to the TLV320AIC32x4 drivers from Annaliese McDermond. - New drivers for Freescale audio mixers, several Intel machines, several Mediatek machines, Meson G12A, Sound Open Firmware and Spreadtrum compressed audio and DMA devices.
2019-05-06Merge branch 'regulator-5.2' into regulator-nextMark Brown1-2/+2
2019-05-06Merge branch 'asoc-5.2' into asoc-nextMark Brown226-2618/+26848