summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds197-0/+197
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman197-0/+197
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01Merge tag 'asoc-fix-v4.14-rc7' of ↵Takashi Iwai10-73/+53
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.14 A bunch of fixes here, mostly device specific ones (the biggest one being the revert of the hotword support for rt5514), with a couple of core fixes for potential issues with corrupted or otherwise invalid topology files.
2017-11-01Merge remote-tracking branches 'asoc/fix/topology', 'asoc/fix/adau17x1', ↵Mark Brown10-73/+53
'asoc/fix/rt5514', 'asoc/fix/rt5616', 'asoc/fix/rt5659' and 'asoc/fix/rt5663' into tmp
2017-10-31ALSA: seq: Fix nested rwsem annotation for lockdep splatTakashi Iwai1-1/+1
syzkaller reported the lockdep splat due to the possible deadlock of grp->list_mutex of each sequencer client object. Actually this is rather a false-positive report due to the missing nested lock annotations. The sequencer client may deliver the event directly to another client which takes another own lock. For addressing this issue, this patch replaces the simple down_read() with down_read_nested(). As a lock subclass, the already existing "hop" can be re-used, which indicates the depth of the call. Reference: http://lkml.kernel.org/r/089e082686ac9b482e055c832617@google.com Reported-by: syzbot <bot+7feb8de6b4d6bf810cf098bef942cc387e79d0ad@syzkaller.appspotmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-31ALSA: timer: Add missing mutex lock for compat ioctlsTakashi Iwai1-2/+15
The races among ioctl and other operations were protected by the commit af368027a49a ("ALSA: timer: Fix race among timer ioctls") and later fixes, but one code path was forgotten in the scenario: the 32bit compat ioctl. As syzkaller recently spotted, a very similar use-after-free may happen with the combination of compat ioctls. The fix is simply to apply the same ioctl_lock to the compat_ioctl callback, too. Fixes: af368027a49a ("ALSA: timer: Fix race among timer ioctls") Reference: http://lkml.kernel.org/r/089e082686ac9b482e055c832617@google.com Reported-by: syzbot <bot+e5f3c9783e7048a74233054febbe9f1bdf54b6da@syzkaller.appspotmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-24ALSA: hda - fix headset mic problem for Dell machines with alc236Hui Wang1-0/+8
We have several Dell laptops which use the codec alc236, the headset mic can't work on these machines. Following the commit 736f20a70, we add the pin cfg table to make the headset mic work. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-21ASoC: rt5616: fix 0x91 default valueBard Liao1-1/+1
The default value of register 0x91 is 0x0c00 instead of 0x0000. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-20ALSA: hda/realtek - Add support for ALC236/ALC3204Kailang Yang1-0/+11
Add support for ALC236/ALC3204. Add headset mode support for ALC236/ALC3204. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-18ASoC: rt5659: connect LOUT Amp with Charge PumpBard Liao1-0/+1
"Charge Pump" is necessary for "LOUT Amp". Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-18ASoC: rt5659: register power bit of LOUT AmpBard Liao1-1/+2
There is a power bit for LOUT Amp. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-18ALSA: hda - Fix incorrect TLV callback check introduced during set_fs() removalTakashi Iwai2-42/+86
The commit 99b5c5bb9a54 ("ALSA: hda - Remove the use of set_fs()") converted the get_kctl_0dB_offset() call for killing set_fs() usage in HD-audio codec code. The conversion assumed that the TLV callback used in HD-audio code is only snd_hda_mixer_amp() and applies the TLV calculation locally. Although this assumption is correct, and all slave kctls are actually with that callback, the current code is still utterly buggy; it doesn't hit this condition and falls back to the next check. It's because the function gets called after adding slave kctls to vmaster. By assigning a slave kctl, the slave kctl object is faked inside vmaster code, and the whole kctl ops are overridden. Thus the callback op points to a different value from what we've assumed. More badly, as reported by the KERNEXEC and UDEREF features of PaX, the code flow turns into the unexpected pitfall. The next fallback check is SNDRV_CTL_ELEM_ACCESS_TLV_READ access bit, and this always hits for each kctl with TLV. Then it evaluates the callback function pointer wrongly as if it were a TLV array. Although currently its side-effect is fairly limited, this incorrect reference may lead to an unpleasant result. For addressing the regression, this patch introduces a new helper to vmaster code, snd_ctl_apply_vmaster_slaves(). This works similarly like the existing map_slaves() in hda_codec.c: it loops over the slave list of the given master, and applies the given function to each slave. Then the initializer function receives the right kctl object and we can compare the correct pointer instead of the faked one. Also, for catching the similar breakage in future, give an error message when the unexpected TLV callback is found and bail out immediately. Fixes: 99b5c5bb9a54 ("ALSA: hda - Remove the use of set_fs()") Reported-by: PaX Team <pageexec@freemail.hu> Cc: <stable@vger.kernel.org> # v4.13 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-18ALSA: hda: Remove superfluous '-' added by printk conversionTakashi Iwai1-1/+1
While converting the error messages to the standard macros in the commit 4e76a8833fac ("ALSA: hda - Replace with standard printk"), a superfluous '-' slipped in the code mistakenly. Its influence is almost negligible, merely shows a dB value as negative integer instead of positive integer (or vice versa) in the rare error message. So let's kill this embarrassing byte to show more correct value. Fixes: 4e76a8833fac ("ALSA: hda - Replace with standard printk") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-18ALSA: hda: Abort capability probe at invalid register readTakashi Iwai1-0/+5
The loop in snd_hdac_bus_parse_capabilities() may go to nirvana when it hits an invalid register value read: BUG: unable to handle kernel paging request at ffffad5dc41f3fff IP: pci_azx_readl+0x5/0x10 [snd_hda_intel] Call Trace: snd_hdac_bus_parse_capabilities+0x3c/0x1f0 [snd_hda_core] azx_probe_continue+0x7d5/0x940 [snd_hda_intel] ..... This happened on a new Intel machine, and we need to check the value and abort the loop accordingly. [Note: the fixes tag below indicates only the commit where this patch can be applied; the original problem was introduced even before that commit] Fixes: 6720b38420a0 ("ALSA: hda - move bus_parse_capabilities to core") Cc: <stable@vger.kernel.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-18ALSA: seq: Enable 'use' locking in all configurationsBen Hutchings2-16/+0
The 'use' locking macros are no-ops if neither SMP or SND_DEBUG is enabled. This might once have been OK in non-preemptible configurations, but even in that case snd_seq_read() may sleep while relying on a 'use' lock. So always use the proper implementations. Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-16ALSA: usb-audio: Add native DSD support for Pro-Ject Pre Box S2 DigitalJussi Laako1-0/+1
Add native DSD support quirk for Pro-Ject Pre Box S2 Digital USB id 2772:0230. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-11ALSA: caiaq: Fix stray URB at probe error pathTakashi Iwai1-3/+9
caiaq driver doesn't kill the URB properly at its error path during the probe, which may lead to a use-after-free error later. This patch addresses it. Reported-by: Johan Hovold <johan@kernel.org> Reviewed-by: Johan Hovold <johan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-11ALSA: seq: Fix use-after-free at creating a portTakashi Iwai2-3/+10
There is a potential race window opened at creating and deleting a port via ioctl, as spotted by fuzzing. snd_seq_create_port() creates a port object and returns its pointer, but it doesn't take the refcount, thus it can be deleted immediately by another thread. Meanwhile, snd_seq_ioctl_create_port() still calls the function snd_seq_system_client_ev_port_start() with the created port object that is being deleted, and this triggers use-after-free like: BUG: KASAN: use-after-free in snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] at addr ffff8801f2241cb1 ============================================================================= BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in snd_seq_create_port+0x94/0x9b0 [snd_seq] age=1 cpu=3 pid=4511 ___slab_alloc+0x425/0x460 __slab_alloc+0x20/0x40 kmem_cache_alloc_trace+0x150/0x190 snd_seq_create_port+0x94/0x9b0 [snd_seq] snd_seq_ioctl_create_port+0xd1/0x630 [snd_seq] snd_seq_do_ioctl+0x11c/0x190 [snd_seq] snd_seq_ioctl+0x40/0x80 [snd_seq] do_vfs_ioctl+0x54b/0xda0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x16/0x75 INFO: Freed in port_delete+0x136/0x1a0 [snd_seq] age=1 cpu=2 pid=4717 __slab_free+0x204/0x310 kfree+0x15f/0x180 port_delete+0x136/0x1a0 [snd_seq] snd_seq_delete_port+0x235/0x350 [snd_seq] snd_seq_ioctl_delete_port+0xc8/0x180 [snd_seq] snd_seq_do_ioctl+0x11c/0x190 [snd_seq] snd_seq_ioctl+0x40/0x80 [snd_seq] do_vfs_ioctl+0x54b/0xda0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x16/0x75 Call Trace: [<ffffffff81b03781>] dump_stack+0x63/0x82 [<ffffffff81531b3b>] print_trailer+0xfb/0x160 [<ffffffff81536db4>] object_err+0x34/0x40 [<ffffffff815392d3>] kasan_report.part.2+0x223/0x520 [<ffffffffa07aadf4>] ? snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] [<ffffffff815395fe>] __asan_report_load1_noabort+0x2e/0x30 [<ffffffffa07aadf4>] snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] [<ffffffffa07aa8f0>] ? snd_seq_ioctl_delete_port+0x180/0x180 [snd_seq] [<ffffffff8136be50>] ? taskstats_exit+0xbc0/0xbc0 [<ffffffffa07abc5c>] snd_seq_do_ioctl+0x11c/0x190 [snd_seq] [<ffffffffa07abd10>] snd_seq_ioctl+0x40/0x80 [snd_seq] [<ffffffff8136d433>] ? acct_account_cputime+0x63/0x80 [<ffffffff815b515b>] do_vfs_ioctl+0x54b/0xda0 ..... We may fix this in a few different ways, and in this patch, it's fixed simply by taking the refcount properly at snd_seq_create_port() and letting the caller unref the object after use. Also, there is another potential use-after-free by sprintf() call in snd_seq_create_port(), and this is moved inside the lock. This fix covers CVE-2017-15265. Reported-and-tested-by: Michael23 Yu <ycqzsy@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-10ALSA: usb-audio: Kill stray URB at exitingTakashi Iwai2-2/+12
USB-audio driver may leave a stray URB for the mixer interrupt when it exits by some error during probe. This leads to a use-after-free error as spotted by syzkaller like: ================================================================== BUG: KASAN: use-after-free in snd_usb_mixer_interrupt+0x604/0x6f0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x23d/0x350 mm/kasan/report.c:409 __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:430 snd_usb_mixer_interrupt+0x604/0x6f0 sound/usb/mixer.c:2490 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 .... Allocated by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772 kmalloc ./include/linux/slab.h:493 kzalloc ./include/linux/slab.h:666 snd_usb_create_mixer+0x145/0x1010 sound/usb/mixer.c:2540 create_standard_mixer_quirk+0x58/0x80 sound/usb/quirks.c:516 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 create_composite_quirk+0x1c4/0x3e0 sound/usb/quirks.c:59 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 usb_audio_probe+0x1040/0x2c10 sound/usb/card.c:618 .... Freed by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524 slab_free_hook mm/slub.c:1390 slab_free_freelist_hook mm/slub.c:1412 slab_free mm/slub.c:2988 kfree+0xf6/0x2f0 mm/slub.c:3919 snd_usb_mixer_free+0x11a/0x160 sound/usb/mixer.c:2244 snd_usb_mixer_dev_free+0x36/0x50 sound/usb/mixer.c:2250 __snd_device_free+0x1ff/0x380 sound/core/device.c:91 snd_device_free_all+0x8f/0xe0 sound/core/device.c:244 snd_card_do_free sound/core/init.c:461 release_card_device+0x47/0x170 sound/core/init.c:181 device_release+0x13f/0x210 drivers/base/core.c:814 .... Actually such a URB is killed properly at disconnection when the device gets probed successfully, and what we need is to apply it for the error-path, too. In this patch, we apply snd_usb_mixer_disconnect() at releasing. Also introduce a new flag, disconnected, to struct usb_mixer_interface for not performing the disconnection procedure twice. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09ALSA: line6: Fix leftover URB at error-path during probeTakashi Iwai1-3/+4
While line6_probe() may kick off URB for a control MIDI endpoint, the function doesn't clean up it properly at its error path. This results in a leftover URB action that is eventually triggered later and causes an Oops like: general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 0 Comm: swapper/1 Not tainted RIP: 0010:usb_fill_bulk_urb ./include/linux/usb.h:1619 RIP: 0010:line6_start_listen+0x3fe/0x9e0 sound/usb/line6/driver.c:76 Call Trace: <IRQ> line6_data_received+0x1f7/0x470 sound/usb/line6/driver.c:326 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 usb_hcd_giveback_urb+0x337/0x420 drivers/usb/core/hcd.c:1845 dummy_timer+0xba9/0x39f0 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x2a2/0x940 kernel/time/timer.c:1281 .... Since the whole clean-up procedure is done in line6_disconnect() callback, we can simply call it in the error path instead of open-coding the whole again. It'll fix such an issue automagically. The bug was spotted by syzkaller. Fixes: eedd0e95d355 ("ALSA: line6: Don't forget to call driver's destructor at error path") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09ALSA: line6: Fix NULL dereference at podhd_disconnect()Takashi Iwai1-1/+2
When podhd_init() failed with the acquiring a ctrl i/f, the line6 helper still calls the disconnect callback that eventually calls again usb_driver_release_interface() with the NULL intf. Put the proper NULL check before calling it for avoiding an Oops. Fixes: fc90172ba283 ("ALSA: line6: Claim pod x3 usb data interface") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09ALSA: line6: Fix missing initialization before error pathTakashi Iwai1-2/+3
The error path in podhd_init() tries to clear the pending timer, while the timer object is initialized at the end of init sequence, thus it may hit the uninitialized object, as spotted by syzkaller: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 1845 Comm: kworker/1:2 Not tainted 4.14.0-rc2-42613-g1488251d1a98 #238 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769 __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385 lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002 del_timer_sync+0x12c/0x280 kernel/time/timer.c:1237 podhd_disconnect+0x8c/0x160 sound/usb/line6/podhd.c:299 line6_probe+0x844/0x1310 sound/usb/line6/driver.c:783 podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474 .... For addressing it, assure the initializations of timer and work by moving them to the beginning of podhd_init(). Fixes: 790869dacc3d ("ALSA: line6: Add support for POD X3") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09ALSA: seq: Fix copy_from_user() call inside lockTakashi Iwai1-8/+19
The event handler in the virmidi sequencer code takes a read-lock for the linked list traverse, while it's calling snd_seq_dump_var_event() in the loop. The latter function may expand the user-space data depending on the event type. It eventually invokes copy_from_user(), which might be a potential dead-lock. The sequencer core guarantees that the user-space data is passed only with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it and always takes read-lock(). For avoiding the problem above, this patch introduces rwsem for non-atomic case, while keeping rwlock for atomic case. Also while we're at it: the superfluous irq flags is dropped in snd_virmidi_input_open(). Reported-by: Jia-Ju Bai <baijiaju1990@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09ALSA: usb-audio: Add sample rate quirk for Plantronics P610Kai-Heng Feng1-0/+1
Like other Plantronics devices, P610 does not support sample rate reading. Apply sample rate quirk to it. BugLink: https://bugs.launchpad.net/bugs/1719853 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-05Merge tag 'sound-4.14-rc4' of ↵Linus Torvalds8-11/+60
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes, mostly with stable ones: - X32 ABI fix for PCM; likely not so many people suffer from it, but still better to fix - Two minor kernel warning fixes on USB audio devices spotted by syzkaller - Regression fix of echoaudio due to its inconsistent dimension - Fix for HBR support on Intel DP audio, on some recent chips - USB-audio quirk for yet another Plantronics devices - Fix for potential double-fetch in ASIHPI FIFO queue" * tag 'sound-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usx2y: Suppress kernel warning at page allocation failures Revert "ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members" ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor ALSA: pcm: Fix structure definition for X32 ABI ALSA: usb-audio: Add sample rate quirk for Plantronics C310/C520-M ALSA: hda - program ICT bits to support HBR audio ALSA: asihpi: fix a potential double-fetch bug when copying puhm ALSA: compress: Remove unused variable
2017-10-02ALSA: usx2y: Suppress kernel warning at page allocation failuresTakashi Iwai1-2/+4
The usx2y driver allocates the stream read/write buffers in continuous pages depending on the stream setup, and this may spew the kernel warning messages with a stack trace like: WARNING: CPU: 1 PID: 1846 at mm/page_alloc.c:3883 __alloc_pages_slowpath+0x1ef2/0x2d70 Modules linked in: CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted .... It may confuse user as if it were any serious error, although this is no fatal error and the driver handles the error case gracefully. Since the driver has already some sanity check of the given size (128 and 256 pages), it can't pass any crazy value. So it's merely page fragmentation. This patch adds __GFP_NOWARN to each caller for suppressing such kernel warnings. The original issue was spotted by syzkaller. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-02Revert "ALSA: echoaudio: purge contradictions between dimension matrix ↵Takashi Sakamoto1-3/+3
members and total number of members" This reverts commit 275353bb684e to fix a regression which can abort 'alsactl' program in alsa-utils due to assertion in alsa-lib. alsactl: control.c:2513: snd_ctl_elem_value_get_integer: Assertion `idx < sizeof(obj->value.integer.value) / sizeof(obj->value.integer.value[0])' failed. alsactl: control.c:2976: snd_ctl_elem_value_get_integer: Assertion `idx < ARRAY_SIZE(obj->value.integer.value)' failed. This commit is a band-aid. In a point of usage of ALSA control interface, the drivers still bring an issue that they prevent userspace applications to have a consistent way to parse each levels of the dimension information via ALSA control interface. Let me investigate this issue. Current implementation of the drivers have three control element sets with dimension information: * 'Monitor Mixer Volume' (type: integer) * 'VMixer Volume' (type: integer) * 'VU-meters' (type: boolean) Although the number of elements named as 'Monitor Mixer Volume' differs depending on drivers in this group, it can be calculated by macros defined by each driver (= (BX_NUM - BX_ANALOG_IN) * BX_ANALOG_IN). Each of the elements has one member for value and has dimension information with 2 levels (= BX_ANALOG_IN * (BX_NUM - BX_ANALOG_IN)). For these elements, userspace applications are expected to handle the dimension information so that all of the elements construct a matrix where the number of rows and columns are represented by the dimension information. The same way is applied to elements named as 'VMixer Volume'. The number of these elements can also be calculated by macros defined by each drivers (= PX_ANALOG_IN * BX_ANALOG_IN). Each of the element has one member for value and has dimension information with 2 levels (= BX_ANALOG_IN * PX_ANALOG_IN). All of the elements construct a matrix with the dimension information. An element named as 'VU-meters' gets a different way in a point of dimension information. The element includes 96 members for value. The element has dimension information with 3 levels (= 3 or 2 * 16 * 2). For this element, userspace applications are expected to handle the dimension information so that all of the members for value construct a matrix where the number of rows and columns are represented by the dimension information. This is different from the way for the former. As a summary, the drivers were not designed to produce a consistent way to parse the dimension information. This makes it hard for general userspace applications such as amixer to parse the information by a consistent way, and actually no userspace applications except for 'echomixer' utilize the dimension information. Additionally, no drivers excluding this group use the information. The reverted commit was written based on the latter way. A commit 860c1994a70a ('ALSA: control: add dimension validator for userspace elements') is written based on the latter way, too. The patch should be reconsider too in the same time to re-define a consistent way to parse the dimension information. Reported-by: Mark Hills <mark@xwax.org> Reported-by: S. Christian Collins <s.chriscollins@gmail.com> Fixes: 275353bb684e ('ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members') Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-09-25ASoC: rt5663: Change the dev getting function in rt5663_irqoder_chiou@realtek.com1-1/+2
In the irq handler "rt5663_irq", while the codec is not initialized, rt5663->codec will be null, and it will cause the kernel panic in the debug print enabled. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-22ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptorTakashi Iwai1-0/+20
When a USB-audio device receives a maliciously adjusted or corrupted buffer descriptor, the USB-audio driver may access an out-of-bounce value at its parser. This was detected by syzkaller, something like: BUG: KASAN: slab-out-of-bounds in usb_audio_probe+0x27b2/0x2ab0 Read of size 1 at addr ffff88006b83a9e8 by task kworker/0:1/24 CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #224 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 snd_usb_create_streams sound/usb/card.c:248 usb_audio_probe+0x27b2/0x2ab0 sound/usb/card.c:605 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 This patch adds the checks of out-of-bounce accesses at appropriate places and bails out when it goes out of the given buffer. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-09-22ALSA: pcm: Fix structure definition for X32 ABIBaolin Wang1-0/+1
X32 ABI uses the 64bit timespec in addition to 64bit alignment of 64bit values. We have added compat ABI for these ioctls, but this patch adds one missing padding into 'struct snd_pcm_mmap_status_x32' to fix incompatibilities. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-09-20ALSA: usb-audio: Add sample rate quirk for Plantronics C310/C520-MKai-Heng Feng1-0/+2
Like other Plantronics devices, C310 and C520-M do not support sample rate reading. Add them to the sample rate quirk accordingly. BugLink: https://bugs.launchpad.net/bugs/1708499 BugLink: https://bugs.launchpad.net/bugs/1709282 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-09-20ALSA: hda - program ICT bits to support HBR audioSriram Periyasamy1-0/+21
On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake, KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital Converter Control #3 needs to be set explicitly for HDMI/DisplayPort High Bit Rate (HBR) audio playback to work. This was not required in earlier platforms when HBR was first introduced. The ICT bits are defined in Section 7.3.3.9 of the HDaudio 1.0a specification. Since the ICT bitfield was not specified for HDAudio 1.0 devices (before 2009), we only program it on machines more recent than Haswell. We tested that this fix is not needed on Baytrail-I (MinnowBoard Turbot) and believe by extension it also does not apply to Braswell. [ Moved AC_VERB_SET_DIGI_CONVERT_3 definition to the right place by tiwai ] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797 Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-09-19ALSA: asihpi: fix a potential double-fetch bug when copying puhmMeng Xu1-4/+8
The hm->h.size is intended to hold the actual size of the hm struct that is copied from userspace and should always be <= sizeof(*hm). However, after copy_from_user(hm, puhm, hm->h.size), since userspace process has full control over the memory region pointed by puhm, it is possible that the value of hm->h.size is different from what is fetched-in previously (get_user(hm->h.size, (u16 __user *)puhm)). In other words, hm->h.size is overriden and the relation between hm->h.size and the hm struct is broken. This patch proposes to use a seperate variable, msg_size, to hold the value of the first fetch and override hm->h.size to msg_size after the second fetch to maintain the relation. Signed-off-by: Meng Xu <mengxu.gatech@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-09-18ALSA: compress: Remove unused variableGuneshwor Singh1-2/+1
Commit 04c5d5a430fc ("ALSA: compress: Embed struct device") removed the statement that used 'str' but didn't remove the variable itself. So remove it. [Adding stable to Cc since pr_debug() may refer to the uninitialized buffer -- tiwai] Fixes: 04c5d5a430fc ("ALSA: compress: Embed struct device") Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-09-15ASoC: rt5514: Revert Hotword Model controlHsin-Yu Chao2-66/+0
This reverts commit eb33869c7206 ("ASoC: rt5514: Guard Hotword Model bytes loading") and commit d18420b0a0b8 ("ASoC: rt5514: expose Hotword Model control") It is discouraged to use SND_SOC_BYTES_TLV to load arbitrary bytes from userspace to driver. Removing the 'Hotword Model' control until we have a good way to verify the content of hotword model blobs. Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-14vfs: constify path argument to kernel_read_file_from_pathMimi Zohar1-1/+1
This patch constifies the path argument to kernel_read_file_from_path(). Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-14ASoC: topology: Fix a potential memory leak in ↵Christophe JAILLET1-1/+1
'soc_tplg_dapm_widget_denum_create()' If this sanity check fails, we must free the memory that has already been allocated. So we must go to 'err' as in the other error handling parth of this function. Fixes: 1a7dd6e2f192 ("ASoC: topology: Allow a widget to have multiple enum controls") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-14ASoC: topology: Fix a potential NULL pointer dereference in ↵Christophe JAILLET1-0/+3
'soc_tplg_dapm_widget_denum_create()' if 'se = kzalloc()' fails in the 'for' loop, we will branch to 'err'. But in this case, 'kc[i].private_value' will still be NULL. A NULL pointer dereference will then occur is the error handling path. In such a case, it is safe to just 'continue' in order to skip this entry and free the other ones. Fixes: 1a7dd6e2f192 ("ASoC: topology: Allow a widget to have multiple enum controls") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig1-1/+1
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-13Merge tag 'clk-for-linus' of ↵Linus Torvalds1-33/+14
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
2017-09-13Merge tag 'sound-fix-4.14-rc1' of ↵Linus Torvalds12-149/+141
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Most of the commits are trivial cleanup patches, while one commit is a significant fix for the race at ALSA sequencer that was spotted by syzkaller" * tag 'sound-fix-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Cancel pending autoload work at unbinding device ALSA: firewire: Use common error handling code in snd_motu_stream_start_duplex() ALSA: asihpi: Kill BUG_ON() usages ALSA: core: Use %pS printk format for direct addresses ALSA: ymfpci: Use common error handling code in snd_ymfpci_create() ALSA: ymfpci: Use common error handling code in snd_card_ymfpci_probe() ALSA: 6fire: Use common error handling code in usb6fire_chip_probe() ALSA: usx2y: Use common error handling code in submit_urbs() ALSA: us122l: Use common error handling code in us122l_create_card() ALSA: hdspm: Use common error handling code in snd_hdspm_probe() ALSA: rme9652: Use common code in hdsp_get_iobox_version() ALSA: maestro3: Use common error handling code in two functions
2017-09-13ASoC: rt5514-spi: check irq status to schedule data copyHsin-Yu Chao2-2/+18
For wake on voice use case, we need to copy data from DSP buffer to PCM stream when system wakes up by voice. However the edge triggered IRQ could be missed when system wakes up, in that case the irq function will not be called. Fix that by checking the irq status bit and schedule data copy accordingly. Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-12ALSA: seq: Cancel pending autoload work at unbinding deviceTakashi Iwai1-0/+3
ALSA sequencer core has a mechanism to load the enumerated devices automatically, and it's performed in an off-load work. This seems causing some race when a sequencer is removed while the pending autoload work is running. As syzkaller spotted, it may lead to some use-after-free: BUG: KASAN: use-after-free in snd_rawmidi_dev_seq_free+0x69/0x70 sound/core/rawmidi.c:1617 Write of size 8 at addr ffff88006c611d90 by task kworker/2:1/567 CPU: 2 PID: 567 Comm: kworker/2:1 Not tainted 4.13.0+ #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events autoload_drivers Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x192/0x22c lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x230/0x340 mm/kasan/report.c:409 __asan_report_store8_noabort+0x1c/0x20 mm/kasan/report.c:435 snd_rawmidi_dev_seq_free+0x69/0x70 sound/core/rawmidi.c:1617 snd_seq_dev_release+0x4f/0x70 sound/core/seq_device.c:192 device_release+0x13f/0x210 drivers/base/core.c:814 kobject_cleanup lib/kobject.c:648 [inline] kobject_release lib/kobject.c:677 [inline] kref_put include/linux/kref.h:70 [inline] kobject_put+0x145/0x240 lib/kobject.c:694 put_device+0x25/0x30 drivers/base/core.c:1799 klist_devices_put+0x36/0x40 drivers/base/bus.c:827 klist_next+0x264/0x4a0 lib/klist.c:403 next_device drivers/base/bus.c:270 [inline] bus_for_each_dev+0x17e/0x210 drivers/base/bus.c:312 autoload_drivers+0x3b/0x50 sound/core/seq_device.c:117 process_one_work+0x9fb/0x1570 kernel/workqueue.c:2097 worker_thread+0x1e4/0x1350 kernel/workqueue.c:2231 kthread+0x324/0x3f0 kernel/kthread.c:231 ret_from_fork+0x25/0x30 arch/x86/entry/entry_64.S:425 The fix is simply to assure canceling the autoload work at removing the device. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-09-12ALSA: firewire: Use common error handling code in snd_motu_stream_start_duplex()Markus Elfring1-8/+8
Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-09-08linux/kernel.h: move DIV_ROUND_DOWN_ULL() macroMasahiro Yamada1-3/+0
This macro is useful to avoid link error on 32-bit systems. We have the same definition in two drivers, so move it to include/linux/kernel.h While we are here, refactor DIV_ROUND_UP_ULL() by using DIV_ROUND_DOWN_ULL(). Link: http://lkml.kernel.org/r/1500945156-12907-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
2017-09-07Merge tag 'sound-4.14-rc1' of ↵Linus Torvalds467-2941/+11713
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "We have touched quite a lot of files but with fewer changes at this cycle; as you can see, most of changes are trivial fixes, especially constification patches. Among the massive attacks by constification gangs, we had a few core changes (mostly for ASoC core), as well the fixes and the updates by major vendors. Some highlights: ALSA core: - Fix possible races in control API user-TLV codes - Small cleanup of PCM core ASoC: - Continued work for componentization; still half-baked, but we're certainly progressing - Use of devres for jack detection GPIOs, rather as a cleanup - Jack detection support for Qualcomm MSM8916 - Support for Allwinner H3, Cirrus Logic CS43130, Intel Kabylake systems with RT5663, Realtek RT274, TI TLV320AIC32x6 and Wolfson WM8523" * tag 'sound-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (512 commits) ALSA: hda/ca0132 - Fix memory leak at error path ALSA: hda: Fix forget to free resource in error handling code path in hda_codec_driver_probe ASoC: cs43130: Fix unused compiler warnings for PM runtime ASoC: cs43130: Fix possible Oops with invalid dev_id ASoC: cs43130: fix spelling mistake: "irq_occurrance" -> "irq_occurrence" ALSA: atmel: Remove leftovers of AVR32 removal ALSA: atmel: convert AC97c driver to GPIO descriptor API ALSA: hda/realtek - Enable jack detection function for Intel ALC700 ALSA: hda: Fix regression of hdmi eld control created based on invalid pcm ASoC: Intel: Skylake: Add IPC to configure the copier secondary pins ASoC: add missing compile rule for max98371 ASoC: add missing compile rule for sirf-audio-codec ASoC: add missing compile rule for max98371 ASoC: cs43130: Add devicetree bindings for CS43130 ASoC: cs43130: Add support for CS43130 codec ASoC: make clock direction configurable in asoc-simple ALSA: ctxfi: Remove null check before kfree ASoC: max98927: Changed device property read function ASoC: max98927: Modified DAPM widget and map to enable/disable VI sense path ASoC: max98927: Added PM suspend and resume function ...
2017-09-07ASoC: adau17x1: Workaround for noise bug in ADCRicard Wanderlof2-1/+25
The ADC in the ADAU1361 (and possibly other Analog Devices codecs) exhibits a cyclic variation in the noise floor (in our test setup between -87 and -93 dB), a new value being attained within this range whenever a new capture stream is started. The cycle repeats after about 10 or 11 restarts. The workaround recommended by the manufacturer is to toggle the ADOSR bit in the Converter Control 0 register each time a new capture stream is started. I have verified that the patch fixes this problem on the ADAU1361, and according to the manufacturer toggling the bit in question in this manner will at least have no detrimental effect on other chips served by this driver. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2017-09-07ALSA: asihpi: Kill BUG_ON() usagesTakashi Iwai1-5/+1
BUG_ON() is the worst choice for a trivial sanity check. Either it should be removed or replaced with a softer one like WARN_ON() if still really needed. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-09-07ALSA: core: Use %pS printk format for direct addressesHelge Deller1-2/+2
The debug functions uses wrongly the %pF instead of the %pS printk format specifier for printing symbols for the address returned by _builtin_return_address(0). Fix it for the ia64, ppc64 and parisc64 architectures. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>