summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2014-02-25Merge branch 'for-linus' into HEADTakashi Iwai18-146/+187
2014-02-25ALSA: hda - Avoid codec D3 for keeping mute LED up on Lenovo Yxx0Takashi Iwai1-0/+12
The GPIO line used for the mute LED control on Lenovo Yxx0 laptops is cleared unexpectedly when the codec goes to D3, typically by power-saving. For avoiding it, add a power filter in the fixup. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25ALSA: hda - Add a fixup for HP Folio 13 mute LEDTakashi Iwai1-0/+20
HP Folio 13 may have a broken BIOS that doesn't set up the mute LED GPIO properly, and the driver guesses it wrongly, too. Add a new fixup entry for setting the GPIO pin statically for this laptop. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70991 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-21ALSA: hda/realtek - Add more entry for enable HP mute ledKailang Yang1-0/+47
More HP machine need mute led support. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-20ALSA: hda - Enable front audio jacks on one HP desktop modelHui Wang1-0/+13
The front headphone and mic jackes on a HP desktop model (Vendor Id: 0x111d76c7 Subsystem Id: 0x103c2b17) can not work, the codec on this machine has 8 physical ports, 6 of them are routed to rear jackes and all of them work very well, while the remaining 2 ports are routed to front headphone and mic jackes, but the corresponding pin complex node are not defined correctly. After apply this fix, the front audio jackes can work very well. [trivial fix of enum definition by tiwai] BugLink: https://bugs.launchpad.net/bugs/1282369 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: Gerald Yang <gerald.yang@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-20Merge tag 'asoc-v3.14-rc3' of ↵Takashi Iwai14-82/+89
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.14 A few fixes, all driver speccific ones. The DaVinci ones aren't as clear as they should be from the subject lines on the commits but they fix issues which will prevent correct operation in some use cases and only affect that particular driver so are reasonably safe.
2014-02-19ALSA: core: Fix missing card sysfs contentsTakashi Iwai1-5/+5
While moving the card device into struct snd_card, the reference to the assigned card in sysfs show/store callbacks were forgotten to be refreshed, still accessing to the no longer used drvdata. Fix these places to refer correctly via container_of(). Also, remove the superfluous NULL checks since it's guaranteed to be non-NULL now. Fixes: 8bfb181c17d2 ('ALSA: Embed card device into struct snd_card') Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-19ALSA: hda - Add QEMU codec vendor IDTakashi Iwai1-0/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-19ALSA: hda/ca0132 - Fix recording from mode id 0x8Hsin-Yu Chao1-3/+1
Incorrect ADC is picked in ca0132_capture_pcm_prepare(), where it assumes multiple streams while there is one stream per ADC. Note that ca0132_capture_pcm_cleanup() already does the right thing. The Chromebook Pixel has a microphone under the keyboard that is attached to node id 0x8. Before this fix, recording would always go to the main internal mic (node id 0x7). Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-19ALSA: hda/ca0132 - setup/cleanup streamsHsin-Yu Chao1-59/+7
When a HDMI stream is opened with the same stream tag as a following opened stream to ca0132, audio will be heard from two ports simultaneously. Fix this issue by change to use snd_hda_codec_setup_stream and snd_hda_codec_cleanup_stream instead, so that an inactive stream can be marked as 'dirty' when found with a conflict stream tag, and then get purified. Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Chih-Chung Chang <chihchung@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-19Merge remote-tracking branch 'asoc/fix/wm8993' into asoc-linusMark Brown1-1/+0
2014-02-19Merge remote-tracking branches 'asoc/fix/blackfin', 'asoc/fix/da9055', ↵Mark Brown13-81/+89
'asoc/fix/davinci', 'asoc/fix/fsl', 'asoc/fix/fsl-esai', 'asoc/fix/max98090', 'asoc/fix/rt5640', 'asoc/fix/samsung' and 'asoc/fix/txx9aclc-ac97' into asoc-linus
2014-02-18ALSA: hda - add headset mic detect quirks for two Dell laptopsHui Wang1-0/+2
When we plug a 3-ring headset on the Dell machines (Vendor ID: 0x10ec0255, Subsystem ID: 0x10280657; Vendor ID: 0x10ec0255, Subsystem ID: 0x1028065f), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1260303 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: Cyrus Lien <cyrus.lien@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-17ALSA: usx2y: Don't peep the card internal objectTakashi Iwai4-79/+61
Avoid traversing the device object list of the card instance just for checking the PCM streams. The driver's private object already contains the array of substream pointers, so it can be simply looked through. The card internal may be restructured in future, thus better not to rely on it. Also, this fixes the possible deadlocks in PCM mutex. Instead of taking multiple PCM mutexes, just take the common mutex in all places. Along with it, rename prepare_mutex as pcm_mutex. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-17ALSA: usb-audio: work around KEF X300A firmware bugClemens Ladisch1-0/+9
When the driver tries to access Function Unit 10, the KEF X300A speakers' firmware apparently locks up, making even PCM streaming impossible. Work around this by ignoring this FU. Cc: <stable@vger.kernel.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-16ASoC: max98090: make REVISION_ID readableStephen Warren1-0/+1
The REVISION_ID register is not currently marked readable. snd_soc_read() refuses to read the register, and hence probe() fails. Fixes: d4807ad2c4c0 ("regmap: Check readable regs in _regmap_read") [exposed the bug, by checking for readability] Fixes: 685e42154dcf ("ASoC: Replace max98090 Device Driver") [left out this register from the readable list] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-16ASoC: txx9aclc_ac97: Fix kernel crash on probeAlexander Shiyan1-3/+5
This patch fixes a crash caused by commit 3bed3344c826 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()). This is an attempt to assign "drvdata->base" while memory for "drvdata" is not already allocated. Fixes: 3bed3344c826 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()) Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-15ALSA: hda - Remove superfluous inclusion of linux/pci.hTakashi Iwai8-8/+0
Some codec drivers still have it since using PCI_VENDOR_ID_*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-15ALSA: hda/realtek - Allow NULL bus->pciTakashi Iwai1-4/+11
Realtek codec driver contains some codes referring to the PCI subdevice IDs, but most of them are optional, typically for checking the codec name variants. Add NULL checks appropriately so that it can work without PCI assignment. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-15ALSA: hda - Remove dependency on bus->pci in hda_beep.cTakashi Iwai1-2/+1
The default parent device can be obtained directly via card object, so we don't need to rely on pci->dev.parent. Since there is no access to pci_dev, we can reduce the inclusion of linux/pci.h, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: ak4117: Do not free priv until timer handler hasn't actually stopped ↵Kirill Tkhai1-1/+1
using it Function del_timer() does not guarantee that timer was really deleted. If the timer handler is beeing executed at the moment, the function does nothing. So, it's possible to use already freed memory in the handler: [ref: Documentation/DocBook/kernel-locking.tmpl] This was found using grep and compile-tested only. Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: Drop __bitwise and typedefs for snd_device attributesTakashi Iwai3-6/+6
Using __bitwise and typedefs for the attributes of snd_device struct isn't so useful, and rather it worsens the readability. Let's drop them and use the straightforward enum. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: i2c/ak413x: Use SNDRV_DEV_CODEC for ak413x codec objectsTakashi Iwai2-2/+2
... instead of SNDRV_DEV_LOWLEVEL. No functional change at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: aoa: Use SNDRV_DEV_CODEC for AOA codec objectsTakashi Iwai3-3/+3
... instead of SNDRV_DEV_LOWLEVEL. No functional change at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: usb-audio: Use SNDRV_DEV_CODEC for mixer objectsTakashi Iwai1-1/+1
Instead of SNDRV_DEV_LOWLEVEL, use SNDRV_DEV_CODEC type for mixer objects so that they are managed in a proper release order. No functional change at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: seq_oss: Use standard printk helpersTakashi Iwai5-18/+18
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: seq: Use standard printk helpersTakashi Iwai13-47/+47
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: timer: Use standard printk helpersTakashi Iwai3-11/+8
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: oss: Use standard printk helpersTakashi Iwai2-56/+55
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: hwdep: Use standard printk helpersTakashi Iwai1-8/+12
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: rawmidi: Use standard printk helpersTakashi Iwai1-15/+34
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: core: Use standard printk helpersTakashi Iwai8-32/+38
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: pcm: Use standard printk helpersTakashi Iwai4-43/+47
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. For simplicity, introduce new helpers for pcm stream, pcm_err(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: control: Use standard printk helpersTakashi Iwai2-9/+8
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: seq_oss: Drop debug printsTakashi Iwai7-68/+0
The debug prints in snd-seq-oss module are rather useless. Let's clean up before further modifications. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: Use standard device refcount for card accountingTakashi Iwai3-40/+17
Drop the own refcount but use the standard device refcounting via get_device() and put_device(). Introduce a new completion to snd_card instead of the wait queue for syncing the last release, which is used in snd_card_free(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: Use static groups for id and number card sysfs attr filesTakashi Iwai1-13/+19
... instead of calling device_create_file() manually. No functional change. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: Embed card device into struct snd_cardTakashi Iwai1-19/+35
As prepared in the previous patch, we are ready to create a device struct for the card object in snd_card_create() now. This patch changes the scheme from the old style to: - embed a device struct for the card object into snd_card struct, - initialize the card device in snd_card_create() (but not register), - registration is done in snd_card_register() via device_add() The actual card device is stored in card->card_dev. The card->dev pointer is kept unchanged and pointing to the parent device as before for compatibility reason. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ASoC: core: Convert to snd_card_new() with a device pointerTakashi Iwai1-2/+1
Also remove superfluous card->dev assignment. Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: spi: Convert to snd_card_new() with a device pointerTakashi Iwai1-4/+2
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: sparc: Convert to snd_card_new() with a device pointerTakashi Iwai3-9/+10
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: sh: Convert to snd_card_new() with a device pointerTakashi Iwai2-4/+3
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: ppc: Convert to snd_card_new() with a device pointerTakashi Iwai3-8/+5
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: pcmcia: Convert to snd_card_new() with a device pointerTakashi Iwai2-5/+4
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: parisc: Convert to snd_card_new() with a device pointerTakashi Iwai1-3/+1
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: mips: Convert to snd_card_new() with a device pointerTakashi Iwai3-6/+4
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: au1x00: convert to platform deviceManuel Lauss1-98/+141
Make sound/mips/au1x00.c a proper platform_driver. [minor coding style fixes, cleanup and forward-ported by tiwai] Cc: Charles Eidsness <charles@cooper-street.com> Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: atmel: Convert to snd_card_new() with a device pointerTakashi Iwai2-16/+7
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: arm: Convert to snd_card_new() with a device pointerTakashi Iwai2-8/+4
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: firewire: Convert to snd_card_new() with a device pointerTakashi Iwai4-8/+8
Also remove superfluous snd_card_set_dev() calls. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 20:48:43 +0000