Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This batch became unexpectedly bigger due to the pending ASoC patches,
but all look small and fine device-specific fixes.
Many of the commits are for ASoC Intel drivers, while the rest are for
ASoC small codec/platform fixes and HD-audio quirks"
* tag 'sound-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek: Fix speaker amp setup on Acer Aspire E1
ALSA: aloop: Fix initialization of controls
ALSA: hda/conexant: Apply quirk for another HP ZBook G5 model
ASoC: fsl_esai: Fix TDM slot setup for I2S mode
ASoC: codecs: lpass-rx-macro: set npl clock rate correctly
ASoC: codecs: lpass-tx-macro: set npl clock rate correctly
ASoC: sunxi: sun4i-codec: fill ASoC card owner
ASoC: cygnus: fix for_each_child.cocci warnings
ASoC: max98373: Added 30ms turn on/off time delay
ASoC: max98373: Changed amp shutdown register as volatile
ASoC: intel: atom: Remove 44100 sample-rate from the media and deep-buffer DAI descriptions
ASoC: intel: atom: Stop advertising non working S24LE support
ASoC: wm8960: Fix wrong bclk and lrclk with pll enabled for some chips
ASoC: SOF: Intel: move ELH chip info
ASoC: SOF: Intel: APL: set shutdown callback to hda_dsp_shutdown
ASoC: SOF: Intel: CNL: set shutdown callback to hda_dsp_shutdown
ASoC: SOF: Intel: ICL: set shutdown callback to hda_dsp_shutdown
ASoC: SOF: Intel: TGL: set shutdown callback to hda_dsp_shutdown
ASoC: SOF: Intel: TGL: fix EHL ops
ASoC: SOF: core: harden shutdown helper
...
|
|
We've got a report about Acer Aspire E1 (PCI SSID 1025:0840) that
loses the speaker output after resume. With the comparison of COEF
dumps, it was identified that the COEF 0x0d bits 0x6000 corresponds to
the speaker amp.
This patch adds the specific quirk for the device to restore the COEF
bits at the codec (re-)initialization.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1183869
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407095730.12560-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.12
A fairly small batch of driver specific fixes, mainly for various x86
systems with the biggest set being fixes to power down DSPs properly on
x86 SOF systems.
|
|
Add a control to the card before copying the id so that the numid field
is initialized in the copy. Otherwise the numid field of active_id,
format_id, rate_id and channels_id will be the same (0) and
snd_ctl_notify() will not queue the events properly.
Signed-off-by: Jonas Holmberg <jonashg@axis.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407075428.2666787-1-jonashg@axis.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is another HP ZBook G5 model with the PCI SSID 103c:844f that
requires the same quirk for controlling the mute LED. Add the
corresponding entry to the quirk table.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212407
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210401171314.667-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When using the driver in I2S TDM mode, the fsl_esai_startup()
function rewrites the number of slots previously set by the
fsl_esai_set_dai_tdm_slot() function to 2.
To fix this, let's use the saved slot count value or, if TDM
is not used and the number of slots is not set, the driver will use
the default value (2), which is set by fsl_esai_probe().
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210402081405.9892-1-shc_work@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things seem calming down, only usual device-specific fixes for
HD-audio and USB-audio at this time"
* tag 'sound-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs for HP 640 G8
ALSA: hda: Add missing sanity checks in PM prepare/complete callbacks
ALSA: hda: Re-add dropped snd_poewr_change_state() calls
ALSA: usb-audio: Apply sample rate quirk to Logitech Connect
ALSA: hda/realtek: call alc_update_headset_mode() in hp_automute_hook
ALSA: hda/realtek: fix a determine_headset_type issue for a Dell AIO
|
|
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
card->owner is a required property and since commit 81033c6b584b ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Add it.
This fixes following warning observed on Lamobo R1:
WARNING: CPU: 1 PID: 190 at sound/core/init.c:207 snd_card_new+0x430/0x480 [snd]
Modules linked in: sun4i_codec(E+) sun4i_backend(E+) snd_soc_core(E) ...
CPU: 1 PID: 190 Comm: systemd-udevd Tainted: G C E 5.10.0-1-armmp #1 Debian 5.10.4-1
Hardware name: Allwinner sun7i (A20) Family
Call trace:
(snd_card_new [snd])
(snd_soc_bind_card [snd_soc_core])
(snd_soc_register_card [snd_soc_core])
(sun4i_codec_probe [sun4i_codec])
Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs")
Related: commit 3c27ea23ffb4 ("ASoC: qcom: Set card->owner to avoid warnings")
Related: commit ec653df2a0cb ("drm/vc4/vc4_hdmi: fill ASoC card owner")
Cc: linux-arm-kernel@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Bastian Germann <bage@linutronix.de>
Link: https://lore.kernel.org/r/20210331151843.30583-1-bage@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HP EliteBook 640 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210330114428.40490-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recently added PM prepare and complete callbacks don't have the
sanity check whether the card instance has been properly initialized,
which may potentially lead to Oops.
This patch adds the azx_is_pm_ready() call in each place
appropriately like other PM callbacks.
Fixes: f5dac54d9d93 ("ALSA: hda: Separate runtime and system suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210329113059.25035-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The card power state change via snd_power_change_state() at the system
suspend/resume seems dropped mistakenly during the PM code rewrite.
The card power state doesn't play much role nowadays but it's still
referred in a few places such as the HDMI codec driver.
This patch restores them, but in a more appropriate place now in the
prepare and complete callbacks.
Fixes: f5dac54d9d93 ("ALSA: hda: Separate runtime and system suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210329113059.25035-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Function "for_each_available_child_of_node" should have of_node_put()
before return around line 1352.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
CC: Sumera Priyadarsini <sylphrenadin@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2103281651320.2854@hadrien
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Logitech ConferenceCam Connect is a compound USB device with UVC and
UAC. Not 100% reproducible but sometimes it keeps responding STALL to
every control transfer once it receives get_freq request.
This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210324105153.2322881-1-ikjn@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Amp requires 10 ~ 30ms for the power ON and OFF.
Added 30ms delay for stability.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-2-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
0x20FF(amp global enable) register was defined as non-volatile,
but it is not. Overheating, overcurrent can cause amp shutdown
in hardware.
'regmap_write' compare register readback value before writing
to avoid same value writing. 'regmap_read' just read cache
not actual hardware value for the non-volatile register.
When amp is internally shutdown by some reason, next 'AMP ON'
command can be ignored because regmap think amp is already ON.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-1-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DAI descriptions
The media and deep-buffer DAIs only support 48000 Hz samplerate,
remove the 44100 sample-rate from their descriptions.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210324132711.216152-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SST firmware's media and deep-buffer inputs are hardcoded to
S16LE, the corresponding DAIs don't have a hw_params callback and
their prepare callback also does not take the format into account.
So far the advertising of non working S24LE support has not caused
issues because pulseaudio defaults to S16LE, but changing pulse-audio's
config to use S24LE will result in broken sound.
Pipewire is replacing pulse now and pipewire prefers S24LE over S16LE
when available, causing the problem of the broken S24LE support to
come to the surface now.
Cc: stable@vger.kernel.org
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/866
Fixes: 098c2cd281409 ("ASoC: Intel: Atom: add 24-bit support for media playback and capture")
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210324132711.216152-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset fixes a logical flow in the core status, improves
shutdown support on Intel SOF platforms with an HDaudio controller and
cleans-up ElkhartLake support.
Guennadi Liakhovetski (1):
ASoC: SOF: Intel: HDA: fix core status verification
Libin Yang (5):
ASoC: SOF: Intel: TGL: fix EHL ops
ASoC: SOF: Intel: TGL: set shutdown callback to hda_dsp_shutdown
ASoC: SOF: Intel: ICL: set shutdown callback to hda_dsp_shutdown
ASoC: SOF: Intel: CNL: set shutdown callback to hda_dsp_shutdown
ASoC: SOF: Intel: APL: set shutdown callback to hda_dsp_shutdown
Pierre-Louis Bossart (2):
ASoC: SOF: core: harden shutdown helper
ASoC: SOF: Intel: move ELH chip info
sound/soc/sof/core.c | 8 +++++++-
sound/soc/sof/intel/apl.c | 3 ++-
sound/soc/sof/intel/cnl.c | 19 ++-----------------
sound/soc/sof/intel/hda-dsp.c | 21 +++++++++++++++++----
sound/soc/sof/intel/hda.h | 1 +
sound/soc/sof/intel/icl.c | 3 ++-
sound/soc/sof/intel/pci-tgl.c | 2 +-
sound/soc/sof/intel/tgl.c | 18 +++++++++++++++++-
8 files changed, 49 insertions(+), 26 deletions(-)
--
2.25.1
|
|
The input MCLK is 12.288MHz, the desired output sysclk is 11.2896MHz
and sample rate is 44100Hz, with the configuration pllprescale=2,
postscale=sysclkdiv=1, some chip may have wrong bclk
and lrclk output with pll enabled in master mode, but with the
configuration pllprescale=1, postscale=2, the output clock is correct.
>From Datasheet, the PLL performs best when f2 is between
90MHz and 100MHz when the desired sysclk output is 11.2896MHz
or 12.288MHz, so sysclkdiv = 2 (f2/8) is the best choice.
So search available sysclk_divs from 2 to 1 other than from 1 to 2.
Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1616150926-22892-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ELH is a derivative of TGL, so it should be exposed in tgl.c for
consistency.
No functional change.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Set shutdown call to hda_dsp_shutdown.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Set shutdown call to hda_dsp_shutdown.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Set shutdown call to hda_dsp_shutdown.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Define the shutdown function to use
snd_sof_suspend as shutdown callback to make sure DSP is in D3 state.
Fixes: 44a4cfad8d78 ("ASoC: SOF: Intel: tgl: do thorough remove at .shutdown() callback")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
EHL is derived from TGL, not CNL, so we shall use the TGL ops.
Fixes: 8d4ba1be3d22 ("ASoC: SOF: pci: split PCI into different drivers")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the probe is handled in a workqueue, we must use
cancel_work_sync() in the shutdown helper to avoid possible race
conditions.
We must also take care of possible errors happening in a probe
workqueue or during pm_runtime resume (called e.g. before shutdown for
PCI devices). We should really only try to access hardware registers
and initiate IPCs if the DSP is fully booted.
Fixes: daff7f1478e12 ("ASoC: SOF: add snd_sof_device_shutdown() helper for shutdown")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When checking for enabled cores it isn't enough to check that
some of the requested cores are running, we have to check that
all of them are.
Fixes: 747503b1813a ("ASoC: SOF: Intel: Add Intel specific HDA DSP HW operations")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We found the alc_update_headset_mode() is not called on some machines
when unplugging the headset, as a result, the mode of the
ALC_HEADSET_MODE_UNPLUGGED can't be set, then the current_headset_type
is not cleared, if users plug a differnt type of headset next time,
the determine_headset_type() will not be called and the audio jack is
set to the headset type of previous time.
On the Dell machines which connect the dmic to the PCH, if we open
the gnome-sound-setting and unplug the headset, this issue will
happen. Those machines disable the auto-mute by ucm and has no
internal mic in the input source, so the update_headset_mode() will
not be called by cap_sync_hook or automute_hook when unplugging, and
because the gnome-sound-setting is opened, the codec will not enter
the runtime_suspend state, so the update_headset_mode() will not be
called by alc_resume when unplugging. In this case the
hp_automute_hook is called when unplugging, so add
update_headset_mode() calling to this function.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210320091542.6748-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We found a recording issue on a Dell AIO, users plug a headset-mic and
select headset-mic from UI, but can't record any sound from
headset-mic. The root cause is the determine_headset_type() returns a
wrong type, e.g. users plug a ctia type headset, but that function
returns omtp type.
On this machine, the internal mic is not connected to the codec, the
"Input Source" is headset mic by default. And when users plug a
headset, the determine_headset_type() will be called immediately, the
codec on this AIO is alc274, the delay time for this codec in the
determine_headset_type() is only 80ms, the delay is too short to
correctly determine the headset type, the fail rate is nearly 99% when
users plug the headset with the normal speed.
Other codecs set several hundred ms delay time, so here I change the
delay time to 850ms for alc2x4 series, after this change, the fail
rate is zero unless users plug the headset slowly on purpose.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210320091542.6748-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes are various ASoC device/platform-specific
small fixes (including a removal of stale file) while the only common
change is a clk management fix in ASoC simple-card driver.
The rest are the usual HD-audio quirks"
* tag 'sound-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (44 commits)
ALSA: usb-audio: Fix unintentional sign extension issue
ALSA: hda/realtek: fix mute/micmute LEDs for HP 850 G8
ASoC: dt-bindings: fsl_spdif: Add compatible string for new platforms
ASoC: rt711: add snd_soc_component remove callback
ASoC: rt5659: Update MCLK rate in set_sysclk()
ASoC: simple-card-utils: Do not handle device clock
ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 840 G8
ALSA: hda/realtek: apply pin quirk for XiaomiNotebook Pro
ALSA: hda/realtek: Apply headset-mic quirks for Xiaomi Redmibook Air
ASoC: mediatek: mt8192: fix tdm out data is valid on rising edge
ALSA: dice: fix null pointer dereference when node is disconnected
ALSA: hda: generic: Fix the micmute led init state
ASoC: qcom: lpass-cpu: Fix lpass dai ids parse
spi: cadence: set cqspi to the driver_data field of struct device
ASoC: SOF: intel: fix wrong poll bits in dsp power down
ASoC: codecs: wcd934x: add a sanity check in set channel map
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
ASoC: qcom: sdm845: Fix array out of bounds access
ASoC: remove remnants of sirf prima/atlas audio codec
...
|
|
The shifting of the u8 integer device by 24 bits to the left will
be promoted to a 32 bit signed int and then sign-extended to a
64 bit unsigned long. In the event that the top bit of device is
set then all then all the upper 32 bits of the unsigned long will
end up as also being set because of the sign-extension. Fix this
by casting device to an unsigned long before the shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: a07df82c7990 ("ALSA: usb-audio: Add DJM750 to Pioneer mixer quirk")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210318132008.15266-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.12
Quite a lot of mostly platform specific fixes here, the only one which
is generic is a fix for regressions on devices with more complex
clocking support with simple-card. There's also a few new device IDs
and platform quirks.
|
|
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Sameer Pujar <spujar@nvidia.com>:
With commit 1e30f642cf29 ("ASoC: simple-card-utils: Fix device module clock")
simple-card-utils can control MCLK clock for rate updates or enable/disable.
But this is breaking some platforms where it is expected that codec drivers
would actually handle the MCLK clock. One such example is following platform.
- "arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts"
In above case codec, wm8904, is using internal PLL and configures sysclk
based on fixed MCLK input. In such cases it is expected that, required PLL
output or sysclk, is just passed via set_sysclk() callback and card driver
need not actually update MCLK rate. Instead, codec can take ownership of
this clock and do the necessary configuration.
So the original commit is reverted and codec driver for rt5659 is updated
to fix my board which has this codec.
Sameer Pujar (2):
ASoC: simple-card-utils: Do not handle device clock
ASoC: rt5659: Update MCLK rate in set_sysclk()
sound/soc/codecs/rt5659.c | 5 +++++
sound/soc/generic/simple-card-utils.c | 13 +++++++------
2 files changed, 12 insertions(+), 6 deletions(-)
--
2.7.4
|
|
The HP EliteBook 850 G8 Notebook PC is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316094236.89028-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We do some IO operations in the snd_soc_component_set_jack callback
function and snd_soc_component_set_jack() will be called when soc
component is removed. However, we should not access SoundWire registers
when the bus is suspended.
So set regcache_cache_only(regmap, true) to avoid accessing in the
soc component removal process.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210316005254.29699-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Simple-card/audio-graph-card drivers do not handle MCLK clock when it
is specified in the codec device node. The expectation here is that,
the codec should actually own up the MCLK clock and do necessary setup
in the driver.
Suggested-by: Mark Brown <broonie@kernel.org>
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit 1e30f642cf29 ("ASoC: simple-card-utils: Fix device
module clock"). The original patch ended up breaking following platform,
which depends on set_sysclk() to configure internal PLL on wm8904 codec
and expects simple-card-utils to not update the MCLK rate.
- "arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts"
It would be best if codec takes care of setting MCLK clock via DAI
set_sysclk() callback.
Reported-by: Michael Walle <michael@walle.cc>
Suggested-by: Mark Brown <broonie@kernel.org>
Suggested-by: Michael Walle <michael@walle.cc>
Fixes: 1e30f642cf29 ("ASoC: simple-card-utils: Fix device module clock")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/1615829492-8972-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HP EliteBook 840 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316074626.79895-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP EliteBook 840 G8 Notebook PC is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316065452.75659-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Built-in microphone and combojack on Xiaomi Notebook Pro (1d72:1701) needs
to be fixed, the existing quirk for Dell works well on that machine.
Signed-off-by: Xiaoliang Yu <yxl_22@outlook.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/OS0P286MB02749B9E13920E6899902CD8EE6C9@OS0P286MB0274.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is another fix for headset-mic problem on Redmibook (1d72:1602),
it also works on Redmibook Air (1d72:1947), which has the same issue.
Signed-off-by: Xiaoliang Yu <yxl_22@outlook.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/TYBP286MB02856DC016849DEA0F9B6A37EE6F9@TYBP286MB0285.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch correct tdm out bck inverse register to AUDIO_TOP_CON3[3].
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/1615516005-781-1-git-send-email-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When node is removed from IEEE 1394 bus, any transaction fails to the node.
In the case, ALSA dice driver doesn't stop isochronous contexts even if
they are running. As a result, null pointer dereference occurs in callback
from the running context.
This commit fixes the bug to release isochronous contexts always.
Cc: <stable@vger.kernel.org> # v5.4 or later
Fixes: e9f21129b8d8 ("ALSA: dice: support AMDTP domain")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210312093407.23437-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Recently we found the micmute led init state is not correct after
freshly installing the ubuntu linux on a Lenovo AIO machine. The
internal mic is not muted, but the micmute led is on and led mode is
'follow mute'. If we mute internal mic, the led is keeping on, then
unmute the internal mic, the led is off. And from then on, the
micmute led will work correctly.
So the micmute led init state is not correct. The led is controlled
by codec gpio (ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), in the
patch_realtek, the gpio data is set to 0x4 initially and the led is
on with this data. In the hda_generic, the led_value is set to
0 initially, suppose users set the 'capture switch' to on from
user space and the micmute led should change to be off with this
operation, but the check "if (val == spec->micmute_led.led_value)" in
the call_micmute_led_update() will skip the led setting.
To guarantee the led state will be set by the 1st time of changing
"Capture Switch", set -1 to the init led_value.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210312041408.3776-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The max boundary check while parsing dai ids makes
sound card registration fail after common up dai ids.
Fixes: cd3484f7f138 ("ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY")
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210311154557.24978-1-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kandagatla <srinivas.kandagatla@linaro.org>:
During testing John Stultz and Amit reported few array our bound issues
after enabling bound sanitizer
This patch series attempts to fix those!
changes since v1:
- make sure the wcd is not de-referenced without intialization
Srinivas Kandagatla (3):
ASoC: qcom: sdm845: Fix array out of bounds access
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
ASoC: codecs: wcd934x: add a sanity check in set channel map
sound/soc/codecs/wcd934x.c | 6 ++++++
sound/soc/qcom/sdm845.c | 6 +++---
2 files changed, 9 insertions(+), 3 deletions(-)
--
2.21.0
|
|
The ADSPCS_SPA is Set Power Active bit. To check if DSP is powered
down, we need to check ADSPCS_CPA, the Current Power Active bit.
Fixes: 747503b1813a3 ("ASoC: SOF: Intel: Add Intel specific HDA DSP HW operations")
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210309004127.4940-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|