summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2019-02-07Merge tag 'sound-5.0-rc6' of ↵Linus Torvalds5-29/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of a few small fixes. The most significant one is the fix for the possible race at loading HD-audio drivers. This has been present for long time and surfaced only in a rare occasion, but finally spotted out" * tag 'sound-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/ca0132 - Fix build error without CONFIG_PCI ALSA: compress: Fix stop handling on compressed capture streams ALSA: usb-audio: Add support for new T+A USB DAC ALSA: hda - Serialize codec registrations ALSA: hda/realtek - Use a common helper for hp pin reference ALSA: hda/realtek - Fix lose hp_pins for disable auto mute ALSA: hda/realtek - Headset microphone support for System76 darp5
2019-02-06ALSA: hda/ca0132 - Fix build error without CONFIG_PCITakashi Iwai1-1/+3
A call of pci_iounmap() call without CONFIG_PCI leads to a build error on some architectures. We tried to address this and add a check of IS_ENABLED(CONFIG_PCI), but this still doesn't seem enough for sh. Ideally we should fix it globally, it's really a corner case, so let's paper over it with a simpler ifdef. Fixes: 1e73359a24fa ("ALSA: hda/ca0132 - make pci_iounmap() call conditional") Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-05ALSA: usb-audio: Add support for new T+A USB DACUdo Eberhardt1-0/+1
This patch adds the T+A VID to the generic check in order to enable native DSD support for T+A devices. This works with the new T+A USB DAC model SD3100HV and will also work with future devices which support the XMOS/Thesycon style DSD format. Signed-off-by: Udo Eberhardt <udo.eberhardt@thesycon.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-01ALSA: hda - Serialize codec registrationsTakashi Iwai2-1/+4
In the current code, the codec registration may happen both at the codec bind time and the end of the controller probe time. In a rare occasion, they race with each other, leading to Oops due to the still uninitialized card device. This patch introduces a simple flag to prevent the codec registration at the codec bind time as long as the controller probe is going on. The controller probe invokes snd_card_register() that does the whole registration task, and we don't need to register each piece beforehand. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-01ALSA: hda/realtek - Use a common helper for hp pin referenceTakashi Iwai1-72/+24
Replace the open-codes in many places with a new common helper for performing the same thing: referring to the primary headphone pin. This eventually fixes the potentially missing headphone pin on some weird devices, too. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-01ALSA: hda/realtek - Fix lose hp_pins for disable auto muteKailang Yang1-0/+45
When auto_mute = no or spec->suppress_auto_mute = 1, cfg->hp_pins will lose value. Add this patch to find hp_pins value. I add fixed for ALC282 ALC225 ALC256 ALC294 and alc_default_init() alc_default_shutup(). Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-31Merge tag 'sound-5.0-rc5' of ↵Linus Torvalds3-34/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Only three fixes. The fix for Realtek HD-audio looks lengthy, but it's just a code shuffling, and the actual changes are fairly small. The rest are a PCM core fix for a long-standing bug that was recently scratched by syzkaller, and a trivial USB-audio quirk for DSD support" * tag 'sound-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fixed hp_pin no value ALSA: pcm: Fix tight loop of OSS capture stream ALSA: usb-audio: Add Opus #3 to quirks for native DSD support
2019-01-31ALSA: hda/realtek - Headset microphone support for System76 darp5Jeremy Soller1-0/+11
On the System76 Darter Pro (darp5), there is a headset microphone input attached to 0x1a that does not have a jack detect. In order to get it working, the pin configuration needs to be set correctly, and the ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is similar to the MIC_NO_PRESENCE fixups for some Dell laptops, except we have a separate microphone jack that is already configured correctly. Signed-off-by: Jeremy Soller <jeremy@system76.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-29ALSA: hda/realtek - Fixed hp_pin no valueKailang Yang1-33/+45
Fix hp_pin always no value. [More notes on the changes: The hp_pin value that is referred in alc294_hp_init() is always zero at the moment the function gets called, hence this is actually useless as in the current code. And, this kind of init sequence should be called from the codec init callback, instead of the parser function. So, the first fix in this patch to move the call call into its own init_hook. OTOH, this function is needed to be called only once after the boot, and it'd take too long for invoking at each resume (where the init callback gets called). So we add a new flag and invoke this only once as an additional fix. The one case is still not covered, though: S4 resume. But this change itself won't lead to any regression in that regard, so we leave S4 issue as is for now and fix it later. -- tiwai ] Fixes: bde1a7459623 ("ALSA: hda/realtek - Fixed headphone issue for ALC700") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-25ALSA: pcm: Fix tight loop of OSS capture streamTakashi Iwai1-1/+8
When the trigger=off is passed for a PCM OSS stream, it sets the start_threshold of the given substream to the boundary size, so that it won't be automatically started. This can be problematic for a capture stream, unfortunately, as detected by syzkaller. The scenario is like the following: - In __snd_pcm_lib_xfer() that is invoked from snd_pcm_oss_read() loop, we have a check whether the stream was already started or the stream can be auto-started. - The function at this check returns 0 with trigger=off since we explicitly disable the auto-start. - The loop continues and repeats calling __snd_pcm_lib_xfer() tightly, which may lead to an RCU stall. This patch fixes the bug by simply allowing the wait for non-started stream in the case of OSS capture. For native usages, it's supposed to be done by the caller side (which is user-space), hence it returns zero like before. (In theory, __snd_pcm_lib_xfer() could wait even for the native API usage cases, too; but I'd like to stay in a safer side for not breaking the existing stuff for now.) Reported-by: syzbot+fbe0496f92a0ce7b786c@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-25ALSA: usb-audio: Add Opus #3 to quirks for native DSD supportOlek Poplavsky1-0/+1
This patch adds quirk VID/PID IDs for the Opus #3 DAP (made by 'The Bit') in order to enable Native DSD support. [ NOTE: this could be handled in the generic way with fp->dvd_raw if we add 0x10cb to the vendor whitelist, but since 0x10cb shows a different vendor name (Erantech), put to the individual entry at this time -- tiwai ] Signed-off-by: Olek Poplavsky <woodenbits@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-25Merge tag 'sound-5.0-rc4' of ↵Linus Torvalds26-297/+221
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A significant amount of fixes at this time, mostly for covering the recent ASoC issues. - Fixes for the missing ASoC driver initialization with non-deferred probes; these triggered other problems in chain, which resulted in yet more fix commits - DaVinci runtime PM fix; the diff looks large but it's just a code shuffling - Various fixes for ASoC Intel drivers: a regression in HD-A HDMI, Kconfig dependency, machine driver adjustments, PLL fix. - Other ASoC driver-specific stuff including the trivial fixes caught by static analysis - Usual HD-audio quirks" * tag 'sound-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits) ALSA: hda - Add mute LED support for HP ProBook 470 G5 ASoC: amd: Fix potential NULL pointer dereference ASoC: imx-audmux: change snprintf to scnprintf for possible overflow ASoC: rt5514-spi: Fix potential NULL pointer dereference ASoC: dapm: change snprintf to scnprintf for possible overflow ASoC: rt5682: Fix PLL source register definitions ASoC: core: Don't defer probe on optional, NULL components ASoC: core: Make snd_soc_find_component() more robust ASoC: soc-core: fix init platform memory handling ASoC: intel: skl: Fix display power regression ALSA: hda/realtek - Fix typo for ALC225 model ASoC: soc-core: Hold client_mutex around soc_init_dai_link() ASoC: Intel: Boards: move the codec PLL configuration to _init ASoC: soc-core: defer card probe until all component is added to list ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages ASoC: tlv320aic32x4: Kernel OOPS while entering DAPM standby mode ASoC: ti: davinci-mcasp: Move context save/restore to runtime_pm callbacks ASoC: Variable "val" in function rt274_i2c_probe() could be uninitialized ASoC: rt5682: Fix recording no sound issue ASoC: Intel: atom: Make PCI dependency explicit ...
2019-01-21ALSA: hda - Add mute LED support for HP ProBook 470 G5Anthony Wong1-0/+1
Support speaker and mic mute LEDs on HP ProBook 470 G5. BugLink: https://bugs.launchpad.net/bugs/1811254 Signed-off-by: Anthony Wong <anthony.wong@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-18Merge tag 'asoc-fix-v5.0-rc2' of ↵Takashi Iwai22-184/+202
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.0 Quite a big batch of fixes here. There's a couple of things going on, the main one is that we found some issues with not deferring probe when we should, causing us to skip some driver initialization. The fixes for this then in turn exposed some issues with how we were searching for components which had previously gone unnoticed due to the original issue. There's also been the normal driver specific stuff and there's been what looks like several batches of automated scanning for issues which have generated quite a large set of smaller fixes for potential crashes and missed error handling.
2019-01-15ASoC: amd: Fix potential NULL pointer dereferenceGustavo A. R. Silva1-2/+4
Check return value from call to devm_kzalloc() in order to prevent a potential NULL pointer dereference. Also, notice that it makes no sense to allocate any resources if res = platform_get_resource(pdev, IORESOURCE_MEM, 0); fails, so move the call to devm_kzalloc() below the mentioned code. Lastly, improve the use of sizeof in the call to devm_kzalloc() by changing it from sizeof(struct i2s_dev_data) to sizeof(*adata) This issue was detected with the help of Coccinelle. Fixes: ac289c7ec0bc ("ASoC: amd: add ACP3x PCM platform driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-15ASoC: imx-audmux: change snprintf to scnprintf for possible overflowSilvio Cesare1-12/+12
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-15ASoC: rt5514-spi: Fix potential NULL pointer dereferenceGustavo A. R. Silva1-0/+2
There is a potential NULL pointer dereference in case devm_kzalloc() fails and returns NULL. Fix this by adding a NULL check on rt5514_dsp. This issue was detected with the help of Coccinelle. Fixes: 6eebf35b0e4a ("ASoC: rt5514: add rt5514 SPI driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-15ASoC: dapm: change snprintf to scnprintf for possible overflowSilvio Cesare1-5/+5
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-15ASoC: rt5682: Fix PLL source register definitionsShuming Fan1-12/+12
Fix typo which causes headphone no sound while using BCLK as PLL source. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-15ASoC: core: Don't defer probe on optional, NULL componentsMatthias Reichl1-2/+4
cpu and platform are optional components in DAI links. For example codec-codec links usually have no platform set. Call snd_soc_find_component only if the name or of_node of a cpu or platform is set. Otherwise it will return NULL and soc_init_dai_link bails out immediately with -EPROBE_DEFER, meaning registering a card with NULL cpu or platform in DAI links can never succeed. Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list") Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-15ASoC: core: Make snd_soc_find_component() more robustMark Brown1-1/+1
There are some use cases where you're checking for a lot of things on a card and it makes sense that you might end up trying to call snd_soc_find_component() without either a name or an of_node. Currently in that case we try to dereference the name and crash but it's more useful to allow the caller to just treat that as a case where we don't find anything, that error handling will already exist. Inspired by a patch from Ajit Pandey fixing some callers. Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-14ASoC: soc-core: fix init platform memory handlingCurtis Malainey1-5/+6
snd_soc_init_platform initializes pointers to snd_soc_dai_link which is statically allocated and it does this by devm_kzalloc. In the event of an EPROBE_DEFER the memory will be freed and the pointers are left dangling. snd_soc_init_platform sees the dangling pointers and assumes they are pointing to initialized memory and does not reallocate them on the second probe attempt which results in a use after free bug since devm has freed the memory from the first probe attempt. Since the intention for snd_soc_dai_link->platform is that it can be set statically by the machine driver we need to respect the pointer in the event we did not set it but still catch dangling pointers. The solution is to add a flag to track whether the pointer was dynamically allocated or not. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-14ASoC: intel: skl: Fix display power regressionTakashi Iwai2-112/+17
Since the refactoring of HD-audio display power management, the display power status is managed per domain. Meanwhile the ASoC hdac_hdmi driver still keeps and relies (incorrectly) on the refcounting together with ASoC skl driver, and this leads to the display state always on. This patch is an attempt to address the regression by simplifying the PM code of ASoC skl and hdac_hdmi drivers. Basically, since the refactoring, we don't have to manage the display power at HD-audio controller suspend / resume but only at HD-audio HDMI codec suspend / resume. So the patch drops the superfluous snd_hdac_display_power() calls in skl driver. Meanwhile, in hdac_hdmi side, we rewrite the PM call just to re-use the runtime PM callbacks like other drivers do. Now the logic is simple: turn off at suspend and turn on at resume. The patch also fixes the possibly missing display-power off at skl driver removal as well as some error paths at probe. Fixes: 029d92c289bd ("ALSA: hda: Refactor display power management") Reported-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-14ALSA: hda/realtek - Fix typo for ALC225 modelKailang Yang1-1/+1
Fix typo for model alc255-dell1 to alc225-dell1. Enable headset mode support for new WYSE NB platform. Fixes: a26d96c7802e ("ALSA: hda/realtek - Comprehensive model list for ALC259 & co") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-12Merge tag 'remove-dma_zalloc_coherent-5.0' of ↵Linus Torvalds2-4/+4
git://git.infradead.org/users/hch/dma-mapping Pull dma_zalloc_coherent() removal from Christoph Hellwig: "We've always had a weird situation around dma_zalloc_coherent. To safely support mapping the allocations to userspace major architectures like x86 and arm have always zeroed allocations from dma_alloc_coherent, but a couple other architectures were missing that zeroing either always or in corner cases. Then later we grew anothe dma_zalloc_coherent interface to explicitly request zeroing, but that just added __GFP_ZERO to the allocation flags, which for some allocators that didn't end up using the page allocator ended up being a no-op and still not zeroing the allocations. So for this merge window I fixed up all remaining architectures to zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op wrapper around dma_alloc_coherent, which fixes all of the above issues. dma_zalloc_coherent is now pointless and can go away, and Luis helped me writing a cocchinelle script and patch series to kill it, which I think we should apply now just after -rc1 to finally settle these issue" * tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: remove dma_zalloc_coherent() cross-tree: phase out dma_zalloc_coherent() on headers cross-tree: phase out dma_zalloc_coherent()
2019-01-10ASoC: soc-core: Hold client_mutex around soc_init_dai_link()Rohit kumar1-0/+4
soc_init_dai_link() calls soc_find_component() which needs to be within client_mutex lock. Add client_mutex lock around soc_init_dai_link() in snd_soc_register_card() to avoid lockdep warning. Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list") Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09ASoC: Intel: Boards: move the codec PLL configuration to _initMac Chiang1-38/+7
move the codec PLL to rt5682_codec_init, because codec only need to config the clock source/PLL once. As the result, remove the platform_clock_controls since no need to control clock anymore. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mac Chiang <mac.chiang@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09ASoC: soc-core: defer card probe until all component is added to listAjit Pandey1-1/+16
DAI component probe is not called if it is not present in component list during sound card registration. Check if component is available in component list for platform and cpu dai before soundcard registration. Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09ALSA: hda/realtek - Disable headset Mic VREF for headset mode of ALC225Kailang Yang1-1/+15
Disable Headset Mic VREF for headset mode of ALC225. This will be controlled by coef bits of headset mode functions. [ Fixed a compile warning and code simplification -- tiwai ] Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-09ALSA: hda/realtek - Add unplug function into unplug state of Headset Mode ↵Kailang Yang1-0/+1
for ALC225 Forgot to add unplug function to unplug state of headset mode for ALC225. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-08ALSA: usb-audio: fix CM6206 register definitionsAmadeusz Sławiński1-1/+1
fix typo after a recent commit causing headphones to have no sound Fixes: ad43d528a7ac (ALSA: usb-audio: Define registers for CM6206) Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain2-4/+4
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-08ALSA: cs46xx: Potential NULL dereference in probeDan Carpenter1-0/+3
The "chip->dsp_spos_instance" can be NULL on some of the ealier error paths in snd_cs46xx_create(). Reported-by: "Yavuz, Tuba" <tuba@ece.ufl.edu> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pagesKangjie Lu1-1/+7
snd_pcm_lib_malloc_pages() may fail, so let's check its status and return its error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-01-07ASoC: tlv320aic32x4: Kernel OOPS while entering DAPM standby modeb-ak1-0/+4
During the bootup of the kernel, the DAPM bias level is in the OFF state. As soon as the DAPM framework kicks in it pushes the codec into STANDBY state. The probe function doesn't prepare the clock, and STANDBY state does a clk_disable_unprepare() without checking the previous state. This leads to an OOPS. Not transitioning from an OFF state to the STANDBY state fixes the problem. Signed-off-by: b-ak <anur.bhargav@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-01-07ALSA: hda/realtek - Support Dell headset mode for New AIO platformKailang Yang1-0/+1
Dell has new platform for ALC274. This will support to enable headset mode. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirksHui Peng1-0/+6
In `create_composite_quirk`, the terminating condition of for loops is `quirk->ifnum < 0`. So any composite quirks should end with `struct snd_usb_audio_quirk` object with ifnum < 0. for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { ..... } the data field of Bower's & Wilkins PX headphones usb device device quirks do not end with {.ifnum = -1}, wihch may result in out-of-bound read. This Patch fix the bug by adding an ending quirk object. Fixes: 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones") Signed-off-by: Hui Peng <benquike@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Always check descriptor sizes in parser codeTakashi Iwai3-12/+30
There are a few places where we access the data without checking the actual object size from the USB audio descriptor. This may result in OOB access, as recently reported. This patch addresses these missing checks. Most of added codes are simple bLength checks in the caller side. For the input and output terminal parsers, we put the length check in the parser functions. For the input terminal, a new argument is added to distinguish between UAC1 and the rest, as they treat different objects. Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reported-by: Hui Peng <benquike@163.com> Tested-by: Hui Peng <benquike@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Check mixer unit descriptors more strictlyTakashi Iwai1-4/+11
We've had some sanity checks of the mixer unit descriptors but they are too loose and some corner cases are overlooked. Add more strict checks in uac_mixer_unit_get_channels() for avoiding possible OOB accesses by malformed descriptors. This also changes the semantics of uac_mixer_unit_get_channels() slightly. Now it returns zero for the cases where the descriptor lacks of bmControls instead of -EINVAL. Then the caller side skips the mixer creation for such unit while it keeps parsing it. This corresponds to the case like Maya44. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit()Takashi Iwai1-2/+8
The parser for the processing unit reads bNrInPins field before the bLength sanity check, which may lead to an out-of-bound access when a malformed descriptor is given. Fix it by assignment after the bLength check. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-04ASoC: ti: davinci-mcasp: Move context save/restore to runtime_pm callbacksPeter Ujfalusi1-72/+64
McASP can loose it's context when runtime_pm is disabled. Save and restore the context when suspending and resuming the device. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-04ASoC: Variable "val" in function rt274_i2c_probe() could be uninitializedYizhuo1-1/+4
Inside function rt274_i2c_probe(), if regmap_read() function returns -EINVAL, then local variable "val" leaves uninitialized but used in if statement. This is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds2-3/+3
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Merge tag 'sound-fix-4.21-rc1' of ↵Linus Torvalds6-117/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Among a few HD-audio fixes, the only significant one is the regression fix on some machines like Dell XPS due to the default binding changes. We ended up reverting the whole since the fix for ASoC HD-audio driver won't be available immediately" * tag 'sound-fix-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Revert DSP detection on legacy HD-audio driver ALSA: hda/tegra: clear pending irq handlers ALSA: hda/realtek: Enable the headset mic auto detection for ASUS laptops
2019-01-03ASoC: rt5682: Fix recording no sound issueShuming Fan1-0/+1
The ADC mixer setting needs to restore to default value after calibration. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-03ASoC: Intel: atom: Make PCI dependency explicitSinan Kaya1-1/+1
After 'commit 5d32a66541c4 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")' dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. This code relies on IOSF_MBI and IOSF_MBI depends on PCI. For this reason, add a direct dependency on CONFIG_PCI to the IOSF_MBI driver. Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-03ALSA: compress: prevent potential divide by zero bugsDan Carpenter1-1/+2
The problem is seen in the q6asm_dai_compr_set_params() function: ret = q6asm_map_memory_regions(dir, prtd->audio_client, prtd->phys, (prtd->pcm_size / prtd->periods), ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ prtd->periods); In this code prtd->pcm_size is the buffer_size and prtd->periods comes from params->buffer.fragments. If we allow the number of fragments to be zero then it results in a divide by zero bug. One possible fix would be to use prtd->pcm_count directly instead of using the division to re-calculate it. But I decided that it doesn't really make sense to allow zero fragments. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-03ASoC: qdsp6: q6asm-dai: Fix a small memory leakDan Carpenter1-3/+9
We can't return directly if snd_dma_alloc_pages() fails; we first need to free prtd->audio_client and prtd. Fixes: 22930c79ac5c ("ASoC: qdsp6: q6asm-dai: Add support to compress offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-03ASoC: qdsp6: q6asm-dai: Fix a NULL vs IS_ERR() bugDan Carpenter1-2/+3
The q6asm_audio_client_alloc() doesn't return NULL, it returns error pointers. Fixes: 22930c79ac5c ("ASoC: qdsp6: q6asm-dai: Add support to compress offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-03ASoC: qdsp6: q6asm-dai: Off by one in of_q6asm_parse_dai_data()Dan Carpenter1-1/+1
The q6asm_fe_dais[] array has MAX_SESSIONS (8) elements so the > comparison should be >= or we access one element beyond the end of the array. Fixes: 22930c79ac5c ("ASoC: qdsp6: q6asm-dai: Add support to compress offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>