summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2021-01-26ALSA: hda/via: Apply the workaround generically for Clevo machinesTakashi Iwai1-1/+1
We've got another report indicating a similar problem wrt the power-saving behavior with VIA codec on Clevo machines. Let's apply the existing workaround generically to all Clevo devices with VIA codecs to cover all in once. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1181330 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210126165603.11683-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-26Merge tag 'asoc-fix-v5.11-rc5' of ↵Takashi Iwai18-51/+162
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.11 More fixes for v5.11, almost all driver specific issues including new device IDs - there's one error handling fix for the topology stuff too.
2021-01-25Merge series "ASoC: SOF: partial fix to Kconfig issues" from Pierre-Louis ↵Mark Brown3-10/+14
Bossart <pierre-louis.bossart@linux.intel.com>: We've had several reports of broken dependencies. The 'right' fix is to revisit the module dependencies as suggested by Arnd Bergmann. This is WIP at https://github.com/thesofproject/linux/pull/2683. Since this is taking longer than expected, I am only sharing quick fixes for now. Pierre-Louis Bossart (2): ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies ASoC: SOF: SND_INTEL_DSP_CONFIG dependency sound/soc/sof/intel/Kconfig | 3 ++- sound/soc/sof/sof-acpi-dev.c | 11 ++++++----- sound/soc/sof/sof-pci-dev.c | 10 ++++++---- 3 files changed, 14 insertions(+), 10 deletions(-) -- 2.25.1
2021-01-25ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5ELibin Yang1-0/+10
Add flag "SOF_RT711_JD_SRC_JD2", flag "SOF_RT715_DAI_ID_FIX" and "SOF_SDW_FOUR_SPK" to the Dell TGL-H based SKU "0A5E". Signed-off-by: Libin Yang <libin.yang@intel.com> Co-developed-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210125081117.814488-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookupStephan Gerhold1-1/+1
The "dai_id" given into LPAIF_INTFDMA_REG(...) is already the real DAI ID, not an index into v->dai_driver. Looking it up again seems entirely redundant. For IPQ806x (and SC7180 since commit 09a4f6f5d21c ("ASoC: dt-bindings: lpass: Fix and common up lpass dai ids") this is now often an out-of-bounds read because the indexes in the "dai_driver" array no longer match the actual DAI ID. Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210125104442.135899-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25ASoC: mediatek: mt8192-mt6359: add format constraints for RT5682Tzung-Bi Shih1-0/+49
MT8192 determines the I2S clock rates according to the sampling rates. There is only 1 set of I2S in between MT8192 and RT5682. If playing and capturing via RT5682 in different sampling rates, the I2S data will be corrupted. Adds format constraints to the corresponding DAI links to make sure the sampling rates are symmetric. Fixes: 18b13ff23fab ("ASoC: mediatek: mt8192: add machine driver with mt6359, rt1015 and rt5682") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210125061453.1056535-1-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25ASoC: ak4458: correct reset polarityEliot Blennerhassett1-15/+7
Reset (aka power off) happens when the reset gpio is made active. Change function name to ak4458_reset to match devicetree property "reset-gpios" Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/ce650f47-4ff6-e486-7846-cc3d033f3601@blennerhassett.gen.nz Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25ASoC: SOF: SND_INTEL_DSP_CONFIG dependencyPierre-Louis Bossart2-9/+12
The sof-pci-dev driver fails to link when built into the kernel and CONFIG_SND_INTEL_DSP_CONFIG is set to =m: arm-linux-gnueabi-ld: sound/soc/sof/sof-pci-dev.o: in function `sof_pci_probe': sof-pci-dev.c:(.text+0x1c): undefined reference to `snd_intel_dsp_driver_probe' As a temporary fix, use IS_REACHABLE to prevent the problem from happening. A more complete solution is to move this code to Intel-specific parts, restructure the drivers and Kconfig as discussed with Arnd Bergmann and Takashi Iwai. Fixes: 82d9d54a6c0e ("ALSA: hda: add Intel DSP configuration / probe code") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210122005725.94163-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25ASoC: SOF: Intel: soundwire: fix select/depend unmet dependenciesPierre-Louis Bossart1-1/+2
The LKP bot reports the following issue: WARNING: unmet direct dependencies detected for SOUNDWIRE_INTEL Depends on [m]: SOUNDWIRE [=m] && ACPI [=y] && SND_SOC [=y] Selected by [y]: - SND_SOC_SOF_INTEL_SOUNDWIRE [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] && SND_SOC_SOF_INTEL_TOPLEVEL [=y] && SND_SOC_SOF_INTEL_PCI [=y] This comes from having tristates being configured independently, when in practice the CONFIG_SOUNDWIRE needs to be aligned with the SOF choices: when the SOF code is compiled as built-in, the CONFIG_SOUNDWIRE also needs to be 'y'. The easiest fix is to replace the 'depends' with a 'select' and have a single user selection to activate SoundWire on Intel platforms. This still allows regmap to be compiled independently as a module. This is just a temporary fix, the select/depend usage will be revisited and the SOF Kconfig re-organized, as suggested by Arnd Bergman. Reported-by: kernel test robot <lkp@intel.com> Fixes: a115ab9b8b93e ('ASoC: SOF: Intel: add build support for SoundWire') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210122005725.94163-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25ALSA: hda: intel-dsp-config: add PCI id for TGL-HBard Liao1-0/+4
Adding PCI id for TGL-H. Like for other TGL platforms, SOF is used if Soundwire codecs or PCH-DMIC is detected. Signed-off-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Xiuli Pan <xiuli.pan@intel.com> Reviewed-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210125083051.828205-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-23ALSA: usb-audio: workaround for iface reset issueTakashi Iwai1-0/+11
The recently introduced sample rate validation code seems causing a problem on some devices; namely, after performing this, the bus gets screwed and it influences even on other USB devices. As a quick workaround, perform it only for the necessary devices; currently MOTU devices are known to need the valid altset checks, so filter out other devices. Fixes: 93db51d06b32 ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3") Reported-by: Jamie Heilman <jamie@audible.transient.net> BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178203 Link: https://lore.kernel.org/r/20210123155842.22652-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-23ALSA: pcm: One more dependency for hw constraintsTakashi Iwai1-2/+2
The fix for a long-standing USB-audio bug required one more dependency variable to be added to the hw constraints. Unfortunately I didn't realize at debugging that the new addition may result in the overflow of the dependency array of each snd_pcm_hw_rule (up to three plus a sentinel), because USB-audio driver adds one more dependency only for a certain device and bus, hence it works as is for many devices. But in a bad case, a simple open always results in -EINVAL (with kernel WARNING if CONFIG_SND_DEBUG is set) no matter what is passed. Since the dependencies are real and unavoidable (USB-audio restricts the hw_params per looping over the format/rate/channels combos), the only good solution seems to raise the bar for one more dependency for snd_pcm_hw_rule -- so does this patch: now the hw constraint dependencies can be up to four. Fixes: 506c203cc3de ("ALSA: usb-audio: Fix hw constraints dependencies") Reported-by: Jamie Heilman <jamie@audible.transient.net> Link: https://lore.kernel.org/r/20210123155730.22576-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-22ALSA: hda/realtek: Enable headset of ASUS B1400CEPE with ALC256Jian-Hong Pan1-0/+1
ASUS B1400CEPE laptop's headset audio is not enabled until ALC256_FIXUP_ASUS_HPE quirk is applied. Here is the original pin node values: 0x12 0x40000000 0x13 0x411111f0 0x14 0x90170110 0x18 0x411111f0 0x19 0x411111f0 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x40461b45 0x1e 0x411111f0 0x21 0x04211020 Signed-off-by: Jian-Hong Pan <jhp@endlessos.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210122054705.48804-1-jhp@endlessos.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-21ASoC: Intel: Skylake: Zero snd_ctl_elem_valueRicardo Ribalda1-1/+1
Clear struct snd_ctl_elem_value before calling ->put() to avoid any data leak. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210121171644.131059-2-ribalda@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_completeRicardo Ribalda1-6/+7
If dobj->control is not initialized we end up in an OOPs during skl_tplg_complete: [ 26.553358] BUG: kernel NULL pointer dereference, address: 0000000000000078 [ 26.561151] #PF: supervisor read access in kernel mode [ 26.566897] #PF: error_code(0x0000) - not-present page [ 26.572642] PGD 0 P4D 0 [ 26.575479] Oops: 0000 [#1] PREEMPT SMP PTI [ 26.580158] CPU: 2 PID: 2082 Comm: udevd Tainted: G C 5.4.81 #4 [ 26.588232] Hardware name: HP Soraka/Soraka, BIOS Google_Soraka.10431.106.0 12/03/2019 [ 26.597082] RIP: 0010:skl_tplg_complete+0x70/0x144 [snd_soc_skl] Fixes: 2d744ecf2b98 ("ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHL") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210121171644.131059-1-ribalda@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21ASoC: qcom: Fix number of HDMI RDMA channels on sc7180Stephen Boyd1-1/+1
Suspending/resuming with an HDMI dongle attached leads to crashes from an audio regmap. Unable to handle kernel paging request at virtual address ffffffc018068000 Mem abort info: ESR = 0x96000047 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081b12000 [ffffffc018068000] pgd=0000000275d14003, pud=0000000275d14003, pmd=000000026365d003, pte=0000000000000000 Internal error: Oops: 96000047 [#1] PREEMPT SMP Call trace: regmap_mmio_write32le+0x2c/0x40 regmap_mmio_write+0x48/0x6c _regmap_bus_reg_write+0x34/0x44 _regmap_write+0x100/0x150 regcache_default_sync+0xc0/0x138 regcache_sync+0x188/0x26c lpass_platform_pcmops_resume+0x48/0x54 [snd_soc_lpass_platform] snd_soc_component_resume+0x28/0x40 soc_resume_deferred+0x6c/0x178 process_one_work+0x208/0x3c8 worker_thread+0x23c/0x3e8 kthread+0x144/0x178 ret_from_fork+0x10/0x18 Code: d503201f d50332bf f94002a8 8b344108 (b9000113) I can reliably reproduce this problem by running 'tail' on the registers file in debugfs for the hdmi regmap. # tail /sys/kernel/debug/regmap/62d87000.lpass-lpass_hdmi/registers [ 84.658733] Unable to handle kernel paging request at virtual address ffffffd0128e800c This crash happens because we're trying to read registers from the regmap beyond the length of the mapping created by ioremap(). The number of hdmi_rdma_channels determines the size of the regmap via this code in sound/soc/qcom/lpass-cpu.c: lpass_hdmi_regmap_config.max_register = LPAIF_HDMI_RDMAPER_REG(variant, variant->hdmi_rdma_channels); According to debugfs the size of the regmap is 0x68010 but according to the DTS file posted in [1] the size is only 0x68000 (see the first reg property of the lpass_cpu node). Let's change the number of channels to be 3 instead of 4 so the math works out to have a max register of 0x67010, nicely fitting inside of the region size of 0x68000. Note: I tried to bump up the size of the register region to the next page to include the 0x68010 register but then the tail command caused SErrors with an async abort, implying that the register region doesn't exist or it isn't clocked because the bus is telling us that the register read failed. I reduce the number of channels and played audio through the HDMI channel and it kept working so I think this is correct. Fixes: 2ad63dc8df6b ("ASoC: qcom: sc7180: Add support for audio over DP") Link: https://lore.kernel.org/r/1601448168-18396-2-git-send-email-srivasam@codeaurora.org [1] Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Cc: Srinivasa Rao <srivasam@codeaurora.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210115203329.846824-1-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21Merge series "ASoC: qcom: Fix broken lpass driver" from Srinivas Kandagatla ↵Mark Brown4-7/+38
<srinivas.kandagatla@linaro.org>: LPASS driver is partially broken on DragonBoard DB410c on 5.10 and its totally broken on other Supported Qualcomm SoCs. This was due to DAI ids being over written by the SoC specific header files in the dt-bindings. Idea of having SoC specific headers is not doable when we are dealing with a common driver. So this patchset attempts to fix this properly by creating a common dt-bindings header for lpass which can be updated with new entries if required. This patchset also add an simple of_xlate function to resolve the dai names and different SoCs might not have 1:1 mapping for the dai_driver array with dai ids. Changes since v1: - removed array indexes as suggested by Stephan G. - rebased to sound/for-next branch - collected Srinivasa tested-by tag for sc7180 platform. Thanks, srini Srinivas Kandagatla (2): ASoC: dt-bindings: lpass: Fix and common up lpass dai ids ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY include/dt-bindings/sound/apq8016-lpass.h | 7 +++---- include/dt-bindings/sound/qcom,lpass.h | 15 +++++++++++++++ include/dt-bindings/sound/sc7180-lpass.h | 6 ++---- sound/soc/qcom/lpass-cpu.c | 22 ++++++++++++++++++++++ sound/soc/qcom/lpass-platform.c | 12 ++++++++++++ sound/soc/qcom/lpass-sc7180.c | 9 +++------ sound/soc/qcom/lpass.h | 2 +- 7 files changed, 58 insertions(+), 15 deletions(-) create mode 100644 include/dt-bindings/sound/qcom,lpass.h -- 2.21.0
2021-01-21Merge series "ASoC: mediatek: mt8183: ignore TDM DAI link by by default" ↵Mark Brown2-2/+8
from Tzung-Bi Shih <tzungbi@google.com>: hdmi-codec is an optional property. The 2 patches fix DAI link binding error when the property doesn't exist in DTS. Tzung-Bi Shih (2): ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 5 ++++- sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) -- 2.30.0.284.gd98b1dd5eaa7-goog
2021-01-21Merge series "Add KUNIT tests for ASoC topology" from Amadeusz ↵Mark Brown1-4/+5
Sławiński<amadeuszx.slawinski@linux.intel.com>: This series adds unit tests for ASoC topology. First fix problems found when developing and running test cases and then add tests implementation. Tests themselves are quite simple and just call snd_soc_tplg_component_load() with various parameters and check the result. Tests themselves are described in more detail in commits adding them. Goal is to expand the amount of test cases in following patches. Prerequisity for this patchset are 2 patches which have already been sent: https://lore.kernel.org/alsa-devel/20210114163602.911205-1-amadeuszx.slawinski@linux.intel.com/T/#t Description on how typical test case itself works: In order to load topology we need to have 3 things: card, codec component & platform component. In typical test case we register card and platform component and bind to dummy codec. There are of course execeptions, when we want to test behaviour of topology API when component or card is missing. Note that this is bit different from typical scenario (in SOF and skylake drivers) where card is registered by machine driver and component by platform driver, as we register both when setting up test. If you check the test case most of them have similar architecture of: 1. /* run test */ ret = snd_soc_register_card(&kunit_comp->card); if (ret != 0 && ret != -EPROBE_DEFER) KUNIT_FAIL(test, "Failed to register card"); 2. ret = snd_soc_component_initialize(&kunit_comp->comp, &test_component, test_dev); KUNIT_EXPECT_EQ(test, 0, ret); 3. ret = snd_soc_add_component(&kunit_comp->comp, NULL, 0); KUNIT_EXPECT_EQ(test, 0, ret); Ad. 1. First we register card, which in most tests returns -EPROBE_DEFER (from snd_soc_bind_card()), as platform component is not yet created. I test for both 0 and -EPROBE_DEFER, as it makes it easier to reshuffle this code around if needed and there is one test case which does it in different order. Ad. 2. Then we initialize platform component with structure pointing at proper probe function, which calls snd_soc_tplg_component_load() with test parameters and checks expected result. Ad. 3. And then in follow up we call snd_soc_add_component() which creates platform component for us and calls snd_soc_try_rebind_card() which if everything is bound properly calls previously set probe function. Amadeusz Sławiński (5): ASoC: topology: Properly unregister DAI on removal Revert "ASoC: soc-devres: add devm_snd_soc_register_dai()" ASoC: topology: KUnit: Add KUnit tests passing various arguments to snd_soc_tplg_component_load ASoC: topology: KUnit: Add KUnit tests passing empty topology with variants to snd_soc_tplg_component_load ASoC: topology: KUnit: Add KUnit tests passing topology with PCM to snd_soc_tplg_component_load include/sound/soc.h | 4 - sound/soc/Kconfig | 17 + sound/soc/Makefile | 5 + sound/soc/soc-devres.c | 37 -- sound/soc/soc-topology-test.c | 843 ++++++++++++++++++++++++++++++++++ sound/soc/soc-topology.c | 9 +- 6 files changed, 870 insertions(+), 45 deletions(-) create mode 100644 sound/soc/soc-topology-test.c -- 2.25.1
2021-01-20ALSA: usb-audio: Fix hw constraints dependenciesTakashi Iwai1-0/+3
Since the recent refactoring, it's been reported that some USB-audio devices (typically webcams) are no longer detected properly by PulseAudio. The debug session revealed that it's failing at probing by PA to try the sample rate 44.1kHz while the device has discrete sample rates other than 44.1kHz. But the puzzle was that arecord works as is, and some other devices with the discrete rates work, either. After all, this turned out to be the lack of the dependencies in a few hw constraint rules: snd_pcm_hw_rule_add() has the (variable) arguments specifying the dependent parameters, and some functions didn't set the target parameter itself as the dependencies. This resulted in an invalid parameter that could be generated only in a certain call pattern. This bug itself has been present in the code, but it didn't trigger errors just because the rules were casually avoiding such a corner case. After the recent refactoring and cleanup, however, the hw constraints work "as expected", and the problem surfaced now. For fixing the problem above, this patch adds the missing dependent parameters to each snd_pcm_hw_rule() call. Fixes: bc4e94aa8e72 ("ALSA: usb-audio: Handle discrete rates properly in hw constraints") BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1181014 Link: https://lore.kernel.org/r/20210120204554.30177-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-20ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by defaultTzung-Bi Shih1-1/+4
hdmi-codec is an optional property. Ignore to bind TDM DAI link if the property isn't specified. Fixes: 5bdbe9771177 ("ASoC: mediatek: mt8183-da7219: use hdmi-codec") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210120092237.1553938-3-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-20ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by defaultTzung-Bi Shih1-1/+4
hdmi-codec is an optional property. Ignore to bind TDM DAI link if the property isn't specified. Fixes: f2024dc55fcb ("ASoC: mediatek: mt8183: use hdmi-codec") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210120092237.1553938-2-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-20ASoC: topology: Properly unregister DAI on removalAmadeusz Sławiński1-4/+5
DAIs need to be removed when topology unload function is called (usually done when component is being removed). We can't do this when device is being removed, as structures we operate on when removing DAI can already be freed. Fixes: 6ae4902f2f34 ("ASoC: soc-topology: use devm_snd_soc_register_dai()") Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210120152846.1703655-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-20ASoC: topology: Fix memory corruption in soc_tplg_denum_create_values()Dan Carpenter1-1/+1
The allocation uses sizeof(u32) when it should use sizeof(unsigned long) so it leads to memory corruption later in the function when the data is initialized. Fixes: 5aebe7c7f9c2 ("ASoC: topology: fix endianness issues") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YAf+8QZoOv+ct526@mwanda Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-20ASoC: qcom: lpass-ipq806x: fix bitwidth regmap fieldSrinivas Kandagatla1-1/+1
BIT_WIDTH field in I2S_CTL register is two bits wide, however recent regmap field conversion patch trimmed it down to one bit. Fix this by correcting the bit range! Fixes: b5022a36d28f ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210119174700.32639-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-20ASoC: AMD Renoir - refine DMI entries for some Lenovo productsJaroslav Kysela1-2/+16
Apparently, the DMI board name LNVNB161216 is also used also for products with the digital microphones connected to the AMD's audio bridge. Refine the DMI table - use product name identifiers extracted from https://bugzilla.redhat.com/show_bug.cgi?id=1892115 . The report for Lenovo Yoga Slim 7 14ARE05 (82A2) is in buglink. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211299 Cc: <stable@kernel.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210120144211.817937-1-perex@perex.cz Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-20ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARYSrinivas Kandagatla4-7/+38
lpass hdmi support patch totally removed support for MI2S TERTIARY and QUATERNARY. One of the major issue was spotted with the design of having separate SoC specific header files for the common lpass driver. This design is prone to break as an when new SoC header is added as the common DAI ids of other SoCs will be overwritten by the new ones. Having a common header qcom,lpass.h should fix the issue and any new DAI ids should be added to the common header. With this change lpass also needs a new of_xlate function to resolve dai name. Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") Reported-by: Jun Nie <jun.nie@linaro.org> Reported-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Srinivasa Rao <srivasam@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210119171527.32145-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-19ALSA: hda: Balance runtime/system PM if direct-complete is disabledKai-Heng Feng1-17/+7
After hibernation, HDA controller can't be runtime-suspended after commit 215a22ed31a1 ("ALSA: hda: Refactor codjc PM to use direct-complete optimization"), which enables direct-complete for HDA codec. The HDA codec driver didn't expect direct-complete will be disabled after it returns a positive value from prepare() callback. However, there are some places that PM core can disable direct-complete. For instance, system hibernation or when codec has subordinates like LEDs. So if the codec is prepared for direct-complete but PM core still calls codec's suspend or freeze callback, partially revert the commit and take the original approach, which uses pm_runtime_force_*() helpers to ensure PM refcount are balanced. Meanwhile, still keep prepare() and complete() callbacks to enable direct-complete and request a resume for jack detection, respectively. Reported-by: Kenneth R. Crudup <kenny@panix.com> Fixes: 215a22ed31a1 ("ALSA: hda: Refactor codec PM to use direct-complete optimization") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20210119152145.346558-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-18Merge tag 'asoc-fix-v5.11-rc4' of ↵Takashi Iwai5-26/+26
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.11 A few more fixes for v5.11, mostly around HDA jack detection, plus a couple of updates to the MAINTAINERS entries.
2021-01-18ASoC: wm_adsp: Fix control name parsing for multi-fwJames Schulman1-0/+3
When switching between firmware types, the wrong control can be selected when requesting control in kernel API. Use the currently selected DSP firwmare type to select the proper mixer control. Signed-off-by: James Schulman <james.schulman@cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210115201105.14075-1-james.schulman@cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-18ALSA: usb-audio: Avoid implicit feedback on Pioneer devicesTakashi Iwai1-8/+9
For addressing the regression on Pioneer devices, we recently corrected the quirk code to enable the implicit feedback mode on those devices properly. However, the devices still showed problems with the full duplex operations with JACK, and after debug sessions, we figured out that the older kernels that had worked with JACK also didn't use the implicit feedback mode at all although they had the quirk code to enable it; instead, the old code worked just to skip the normal sync endpoint setup that would have been detected without it. IOW, what broke without the implicit-fb quirk in the past was the application of the normal sync endpoint that is actually the capture data endpoint on these devices. This patch covers the overseen piece: it modifies the quirk code again not to enable the implicit feedback mode but just to make the driver skipping the sync endpoint detection. This made the driver working with JACK full-duplex mode again. Still it's not quite clear why the implicit feedback doesn't work on those devices yet; maybe it's about some issues in the URB setup. But at least, with this patch, the driver should work in the level of the older kernels again. Fixes: 167c9dc84ec3 ("ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devices") Link: https://lore.kernel.org/r/20210118075816.25068-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-18ALSA: usb-audio: Set sample rate for all sharing EPs on UAC1Takashi Iwai1-0/+9
The UAC2/3 sample rate setup is based on the clock node, which is usually shared in the interface, and can't be re-setup without deselecting the interface once, and that's how the current code behaves. OTOH, the sample rate setup of UAC1 is per endpoint, hence we basically need to call for each endpoint usage even if those share the same interface. This patch fixes the behavior of UAC1 to call always snd_usb_init_sample_rate() in snd_usb_endpoint_configure(). Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management") Link: https://lore.kernel.org/r/20210118075816.25068-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-18ALSA: usb-audio: Fix UAC1 rate setup for secondary endpointsTakashi Iwai2-43/+6
The current sample rate setup function for UAC1 assumes only the first endpoint retrieved from the interface:altset pair, but the rate set up may be needed also for the secondary endpoint. Also, retrieving the endpoint number from the interface descriptor is redundant; we have already the target endpoint in the given audioformat object. This patch simplifies the code and corrects the target endpoint as described in the above. It simply refers to fmt->endpoint directly. Also, this patch drops the pioneer_djm_set_format_quirk() that is caleld from snd_usb_set_format_quirk(); this function does the sample rate setup but for the capture endpoint (0x82), and that's exactly what the change above fixes. Link: https://lore.kernel.org/r/20210118075816.25068-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-15ALSA: hda: Add Cometlake-R PCI IDKai-Chuan Hsieh1-0/+3
Add HD Audio Device PCI ID for the Intel Cometlake-R platform Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Kai-Chuan Hsieh <kaichuan.hsieh@canonical.com> Link: https://lore.kernel.org/r/20210115031515.13100-1-kaichuan.hsieh@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-15ALSA: seq: oss: Fix missing error check in snd_seq_oss_synth_make_info()Takashi Iwai1-1/+2
snd_seq_oss_synth_make_info() didn't check the error code from snd_seq_oss_midi_make_info(), and this leads to the call of strlcpy() with the uninitialized string as the source, which may lead to the access over the limit. Add the proper error check for avoiding the failure. Reported-by: syzbot+e42504ff21cff05a595f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210115093428.15882-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-14ALSA: hda/via: Add minimum mute flagTakashi Iwai1-0/+1
It turned out that VIA codecs also mute the sound in the lowest mixer level. Turn on the dac_min_mute flag to indicate the mute-as-minimum in TLV like already done in Conexant and IDT codecs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210559 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210114072453.11379-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-14ALSA: hda/realtek - Limit int mic boost on Acer Aspire E5-575TChris Chiu1-0/+8
The Acer Apire E5-575T laptop with codec ALC255 has a terrible background noise comes from internal mic capture. And the jack sensing dose not work for headset like some other Acer laptops. This patch limits the internal mic boost on top of the existing ALC255_FIXUP_ACER_MIC_NO_PRESENCE quirk for Acer Aspire E5-575T. Signed-off-by: Chris Chiu <chiu@endlessos.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210114082728.74729-1-chiu@endlessos.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-13ALSA: usb-audio: Always apply the hw constraints for implicit fb syncTakashi Iwai1-63/+108
Since the commit 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync"), we apply the hw constraints for the implicit feedback sync to make the secondary open aligned with the already opened stream setup. This change assumed that the secondary open is performed after the first stream has been already set up, and adds the hw constraints to sync with the first stream's parameters only when the EP setup for the first stream was confirmed at the open time. However, most of applications handling the full-duplex operations do open both playback and capture streams at first, then set up both streams. This results in skipping the additional hw constraints since the counter-part stream hasn't been set up yet at the open of the second stream, and it eventually leads to "incompatible EP" error in the end. This patch corrects the behavior by always applying the hw constraints for the implicit fb sync. The hw constraint rules are defined so that they check the sync EP dynamically at each invocation, instead. This covers the concurrent stream setups better and lets the hw refine calls resolving to the right configuration. Also this patch corrects a minor error that has existed in the debug print that isn't built as default. Fixes: 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync") Link: https://lore.kernel.org/r/20210111081611.12790-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-13Merge v5.11-rc3Mark Brown7-4/+34
2021-01-13ASoC: SOF: Intel: fix page fault at probe if i915 init failsKai Vehmanen1-9/+9
The earlier commit to fix runtime PM in case i915 init fails, introduces a possibility to hit a page fault. snd_hdac_ext_bus_device_exit() is designed to be called from dev.release(). Calling it outside device reference counting, is not safe and may lead to calling the device_exit() function twice. Additionally, as part of ext_bus_device_init(), the device is also registered with snd_hdac_device_register(). Thus before calling device_exit(), the device must be removed from device hierarchy first. Fix the issue by rolling back init actions by calling hdac_device_unregister() and then releasing device with put_device(). This matches with existing code in hdac-ext module. To complete the fix, add handling for the case where hda_codec_load_module() returns -ENODEV, and clean up the hdac_ext resources also in this case. In future work, hdac-ext interface should be extended to allow clients more flexibility to handle the life-cycle of individual devices, beyond just the current snd_hdac_ext_bus_device_remove(), which removes all devices. BugLink: https://github.com/thesofproject/linux/issues/2646 Reported-by: Jaroslav Kysela <perex@perex.cz> Fixes: 6c63c954e1c5 ("ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work") Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Link: https://lore.kernel.org/r/20210113150715.3992635-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-13ALSA: hda: Add AlderLake-P PCI ID and HDMI codec vidKai Vehmanen2-0/+4
Add HD Audio PCI ID and HDMI codec vendor ID for Intel AlderLake-P. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210113155629.4097057-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-13ASoC: SOF: Intel: hda: Avoid checking jack on system suspendKai-Heng Feng1-1/+2
System takes a very long time to suspend after commit 215a22ed31a1 ("ALSA: hda: Refactor codec PM to use direct-complete optimization"): [ 90.065964] PM: suspend entry (s2idle) [ 90.067337] Filesystems sync: 0.001 seconds [ 90.185758] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 90.188713] OOM killer disabled. [ 90.188714] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 90.190024] printk: Suspending console(s) (use no_console_suspend to debug) [ 90.904912] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [49C], continue to suspend [ 321.262505] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5 [ 328.426919] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5 [ 329.490933] ACPI: EC: interrupt blocked That commit keeps the codec suspended during the system suspend. However, mute/micmute LED will clear codec's direct-complete flag by dpm_clear_superiors_direct_complete(). This doesn't play well with SOF driver. When its runtime resume is called for system suspend, hda_codec_jack_check() schedules jackpoll_work which uses snd_hdac_is_power_on() to check whether codec is suspended. Because the direct-complete path isn't taken, pm_runtime_disable() isn't called so snd_hdac_is_power_on() returns false and jackpoll continues to run, and snd_hda_power_up_pm() cannot power up an already suspended codec in multiple attempts, causes the long delay on system suspend: if (dev->power.direct_complete) { if (pm_runtime_status_suspended(dev)) { pm_runtime_disable(dev); if (pm_runtime_status_suspended(dev)) { pm_dev_dbg(dev, state, "direct-complete "); goto Complete; } pm_runtime_enable(dev); } dev->power.direct_complete = false; } When direct-complete path is taken, snd_hdac_is_power_on() returns true and hda_jackpoll_work() is skipped by accident. So this is still not correct. If we were to use snd_hdac_is_power_on() in system PM path, pm_runtime_status_suspended() should be used instead of pm_runtime_suspended(), otherwise pm_runtime_{enable,disable}() may change the outcome of snd_hdac_is_power_on(). Because devices suspend in reverse order (i.e. child first), it doesn't make much sense to resume an already suspended codec from audio controller. So avoid the issue by making sure jackpoll isn't used in system PM process. Fixes: 215a22ed31a1 ("ALSA: hda: Refactor codec PM to use direct-complete optimization") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210112181128.1229827-3-kai.heng.feng@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-13ASoC: SOF: Intel: hda: Modify existing helper to disable WAKEENKai-Heng Feng3-12/+12
Modify hda_codec_jack_wake_enable() to also support disable WAKEEN. In addition, this patch also moves the WAKEEN disablement call out of hda_codec_jack_check() into hda_codec_jack_wake_enable(). This is a preparation for next patch. No functional change intended. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20210112181128.1229827-2-kai.heng.feng@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-13ASoC: SOF: Intel: hda: Resume codec to do jack detectionKai-Heng Feng1-2/+1
Instead of queueing jackpoll_work, runtime resume the codec to let it use different jack detection methods based on jackpoll_interval. This partially matches SOF driver's behavior with commit a6e7d0a4bdb0 ("ALSA: hda: fix jack detection with Realtek codecs when in D3"), the difference is SOF unconditionally resumes the codec. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20210112181128.1229827-1-kai.heng.feng@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-12ALSA: hda/hdmi - enable runtime pm for CI AMD display audioAlex Deucher1-3/+6
We are able to power down the GPU and audio via the GPU driver so flag these asics as supporting runtime pm. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20210105175245.963451-1-alexander.deucher@amd.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-12ALSA: firewire-tascam: Fix integer overflow in midi_port_work()Geert Uytterhoeven1-1/+1
As snd_fw_async_midi_port.consume_bytes is unsigned int, and NSEC_PER_SEC is 1000000000L, the second multiplication in port->consume_bytes * 8 * NSEC_PER_SEC / 31250 always overflows on 32-bit platforms, truncating the result. Fix this by precalculating "NSEC_PER_SEC / 31250", which is an integer constant. Note that this assumes port->consume_bytes <= 16777. Fixes: 531f471834227d03 ("ALSA: firewire-lib/firewire-tascam: localize async midi port") Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210111130251.361335-3-geert+renesas@glider.be Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-12ALSA: fireface: Fix integer overflow in transmit_midi_msg()Geert Uytterhoeven1-1/+1
As snd_ff.rx_bytes[] is unsigned int, and NSEC_PER_SEC is 1000000000L, the second multiplication in ff->rx_bytes[port] * 8 * NSEC_PER_SEC / 31250 always overflows on 32-bit platforms, truncating the result. Fix this by precalculating "NSEC_PER_SEC / 31250", which is an integer constant. Note that this assumes ff->rx_bytes[port] <= 16777. Fixes: 19174295788de77d ("ALSA: fireface: add transaction support") Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210111130251.361335-2-geert+renesas@glider.be Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-12ALSA: hda/tegra: fix tegra-hda on tegra30 socPeter Geis1-1/+1
Currently hda on tegra30 fails to open a stream with an input/output error. For example: speaker-test -Dhw:0,3 -c 2 speaker-test 1.2.2 Playback device is hw:0,3 Stream parameters are 48000Hz, S16_LE, 2 channels Using 16 octaves of pink noise Rate set to 48000Hz (requested 48000Hz) Buffer size range from 64 to 16384 Period size range from 32 to 8192 Using max buffer size 16384 Periods = 4 was set period_size = 4096 was set buffer_size = 16384 0 - Front Left Write error: -5,Input/output error xrun_recovery failed: -5,Input/output error Transfer failed: Input/output error The tegra-hda device was introduced in tegra30 but only utilized in tegra124 until recent chips. Tegra210/186 work only due to a hardware change. For this reason it is unknown when this issue first manifested. Discussions with the hardware team show this applies to all current tegra chips. It has been resolved in the tegra234, which does not have hda support at this time. The explanation from the hardware team is this: Below is the striping formula referenced from HD audio spec. { ((num_channels * bits_per_sample) / number of SDOs) >= 8 } The current issue is seen because Tegra HW has a problem with boundary condition (= 8) for striping. The reason why it is not seen on Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is read from GCAP register. For the given stream (channels = 2, bps = 16); ratio = (channels * bps) / NSDO = 32 / NSDO; On Tegra30, ratio = 32/4 = 8 (FAIL) On Tegra210/186, ratio = 32/2 = 16 (PASS) On Tegra194, ratio = 32/4 = 8 (FAIL) ==> Earlier workaround was applied for it If Tegra210/186 is forced to use 4SDO, it fails there as well. So the behavior is consistent across all these chips. Applying the fix in [1] universally resolves this issue on tegra30-hda. Tested on the Ouya game console and the tf201 tablet. [1] commit 60019d8c650d ("ALSA: hda/tegra: workaround playback failure on Tegra194") Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Ion Agorria <ion@agorria.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20210108135913.2421585-3-pgwipeout@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-08ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devicesTakashi Iwai1-10/+38
Pioneer devices have both playback and capture streams sharing the same iface/altsetting, and those need to be paired as implicit feedback. Instead of a half-baked (and broken) static quirk entry, set up more generically for those devices by checking the number of endpoints and the attribute of the secondary EP. Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management") Reported-by: František Kučera <konference@frantovo.cz> Link: https://lore.kernel.org/r/20210108075219.21463-6-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-08ALSA: usb-audio: Annotate the endpoint index in audioformatTakashi Iwai4-3/+10
There are devices that have multiple endpoints sharing the same iface/altset not only for sync but also for the actual streams, and the audioformat for such an endpoint needs to be handled with the proper endpoint index; otherwise it confuses the endpoint management. This patch extends the audioformat to annotate the endpoint index, and put the proper ep_idx=1 to Pioneer device quirk entries accordingly. Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management") Link: https://lore.kernel.org/r/20210108075219.21463-5-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 20:24:30 +0000