summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2015-06-22Merge tag 'asoc-v4.2' into asoc-nextMark Brown196-2214/+8455
ASoC: Updates for v4.2 The big thing this release has been Liam's addition of topology support to the core. We've also seen quite a bit of driver work and the continuation of Lars' refactoring for component support. - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares. - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring. - Big refactoring and cleanup serieses for the Wolfson ADSP and TI TAS2552 drivers. - Support for TI TAS571x power amplifiers. - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs. - Support for x86 systems with RT5650 and Qualcomm Storm. # gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0 # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
2015-06-22Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', ↵Mark Brown4-5/+7
'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus
2015-06-22Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', ↵Mark Brown10-18/+22
'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus
2015-06-22Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown1-4/+4
2015-06-12ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1]Zidan Wang1-1/+1
the enum of "DAC Polarity" should be wm8960_enum[1]. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-12ASoC: Intel: Fixed incorrect sst pcm_delayFang, Yang A1-1/+1
This patch corrected pcm_delay calculation in BSW sst driver Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12ALSA: hda - Abort the probe without i915 binding for HSW/BDWTakashi Iwai1-2/+16
The previous patch tried to continue the probe if i915 binding fails. For for simplicity reason, we haven't implemented abort even for controller chips that are dedicated for HDMI/DP on HSW and BDW. However, Mengdong suggested that this can be dangerous; BIOS may disable gfx power well although the PCI entry for HD-audio is left, and this may result in the unexpected behavior, kernel errors, etc. For avoiding this situation, abort the probe at i915 binding failure only for HSW/BDW chips selectively. For other chips, it still continues. Fixes: bf06848bdbe5 ('ALSA: hda - Continue probing even if i915 binding fails') Reported-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-11ALSA: hda - Re-add the lost fake mute supportTakashi Iwai3-2/+32
Yet another regression by the transition to regmap cache; for better usability, we had the fake mute control using the zero amp value for Conexant codecs, and this was forgotten in the new hda core code. Since the bits 4-7 are unused for the amp registers (as we follow the syntax of AMP_GET verb), the bit 4 is now used to indicate the fake mute. For setting this flag, snd_hda_codec_amp_update() becomes a function from a simple macro. The bonus is that it gained a proper function description. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-11ALSA: hda - Continue probing even if i915 binding failsTakashi Iwai1-1/+2
Currently snd-hda-intel driver aborts the probing of Intel HD-audio controller with i915 power well management when binding with i915 driver via hda_i915_init() fails. This is no big problem for Haswell and Broadwell where the HD-audio controllers are dedicated to HDMI/DP, thus i915 link is mandatory. However, Skylake, Baytrail and Braswell have only one controller and both HDMI/DP and analog codecs share the same bus. Thus, even if HDMI/DP isn't usable, we should keep the controller working for other codecs. For fixing this, this patch simply allows continuing the probing even if hda_i915_init() call fails. This may leave stale sound components for HDMI/DP devices that are unbound with graphics. We could abort the probing selectively, but from the code simplicity POV, it's better to continue in all cases. Reported-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-10ALSA: hda - Don't actually write registers for caps overwritesTakashi Iwai1-0/+3
Along with the transition to regmap for managing the cached parameter reads, the caps overwrite was also moved to regmap cache. The cache change itself works, but it still tries to write the non-existing verb (the HDA parameter is read-only) wrongly. It's harmless in most cases, but some chips are picky and may result in the codec communication stall. This patch avoids it just by adding the missing flag check in reg_write ops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-09ALSA: hda - fix number of devices query on hotplugDave Airlie1-1/+1
The new regmap code seems to cache this, which isn't helpful for the hotplug dock situation where this gets updated. Use the uncached query for this. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-08ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSBJurgen Kramer1-2/+3
This patch adds native DSD support for the XMOS based JLsounds I2SoverUSB board Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-05Merge remote-tracking branches 'asoc/topic/wm8994', 'asoc/topic/wm8996' and ↵Mark Brown8-4/+830
'asoc/topic/zx' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/topology', 'asoc/topic/twl6040', ↵Mark Brown8-17/+2071
'asoc/topic/wm5100', 'asoc/topic/wm8741' and 'asoc/topic/wm8960' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/sta350', 'asoc/topic/tas2552', ↵Mark Brown8-123/+852
'asoc/topic/tas3a227e' and 'asoc/topic/tas571x' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/simple', 'asoc/topic/ssm2518', ↵Mark Brown4-6/+18
'asoc/topic/ssm2602', 'asoc/topic/ssm4567' and 'asoc/topic/sta32x' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/rt5677', 'asoc/topic/samsung' and ↵Mark Brown9-30/+211
'asoc/topic/sgtl5000' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/max98095', 'asoc/topic/omap', ↵Mark Brown20-350/+804
'asoc/topic/pxa', 'asoc/topic/qcom' and 'asoc/topic/rcar' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/gpiod-flags', ↵Mark Brown19-186/+765
'asoc/topic/gtm601', 'asoc/topic/intel', 'asoc/topic/lm3857' and 'asoc/topic/max98090' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/fsl', 'asoc/topic/fsl-sai', ↵Mark Brown8-32/+156
'asoc/topic/fsl-spdif', 'asoc/topic/fsl-ssi' and 'asoc/topic/gpio-jack' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/davinci' and 'asoc/topic/dpcm' ↵Mark Brown2-82/+132
into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/au1x', 'asoc/topic/bt-sco', ↵Mark Brown4-4/+12
'asoc/topic/cs35l32' and 'asoc/topic/da7210' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/adau1977', 'asoc/topic/adav80x', ↵Mark Brown13-554/+1001
'asoc/topic/arizona' and 'asoc/topic/atmel' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ad1836', ↵Mark Brown8-55/+145
'asoc/topic/ada1977', 'asoc/topic/adau1701' and 'asoc/topic/adau17x1' into asoc-next
2015-06-05Merge remote-tracking branch 'asoc/topic/rt5645' into asoc-nextMark Brown3-263/+847
2015-06-05Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown5-17/+16
2015-06-05Merge remote-tracking branch 'asoc/topic/dapm' into asoc-nextMark Brown109-471/+573
2015-06-05Merge remote-tracking branch 'asoc/topic/core' into asoc-nextMark Brown1-21/+23
2015-06-05Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903' and ↵Mark Brown3-4/+6
'asoc/fix/wm8955' into asoc-linus
2015-06-05Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', ↵Mark Brown9-17/+21
'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus
2015-06-05Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown1-4/+4
2015-06-05ASoC: tas2552: Configure the WCLK frequency based on the streamPeter Ujfalusi2-21/+59
Instead of hard wiring the WCLK frequency at probe time do it runtime. The hard wired 88_96KHz was not even setting the correct bits since it was defined as (1 << 6) which will change the I2S_OUT_SEL bit and will leave the amplifier configured for 8KHz. At the same time clean up and fix the CFG3 register bits. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Add support for word length configurationPeter Ujfalusi2-0/+48
Configure the word length based on the params_width of the stream. Also configure the clock per frame value which is used when tas2552 is bus master. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Implement startup/stop sequence as per TRMPeter Ujfalusi1-16/+28
Certain sequence need to be followed in order to have smooth power up and power down performance. Execute this sequence via DAPM_POST widget. Remove patching the RESERVED_0D register at probe time since it has to be handled every time when we stop or start the amplifier. In order to be able to execute the sequence at the correct time, the driver need to request to ignore the pmdown time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Correct the Speaker Driver Playback Volume (PGA_GAIN)Peter Ujfalusi1-2/+2
The last parameter for DECLARE_TLV_DB_SCALE() is to tell if the gain will be muted or not when it is set to raw 0. IN this case it is not muted. The PGA_GAIN is in 0-4 bits in the register. Fix the offset in the SOC_SINGLE_TLV() for this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Clean up the Digital - Analog DAPM route definitionPeter Ujfalusi1-8/+6
The strings should be: 'static const char * const tas2552_input_texts[]' SOC_DAPM_ENUM should have "Route" in place of xname and no need to have it as an array. Also align the parameters. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Add TDM supportPeter Ujfalusi2-4/+58
TDM support is achieved using DSP transfer mode and setting a programmable offset which specifies where data begins with respect to the frame sync. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Correct and clean up data format and BCLK/WCLK directionPeter Ujfalusi2-18/+17
Use names from the datasheet for the definitions. Correct the data format definitions since they were not correct. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Correct dai format supportPeter Ujfalusi1-14/+15
DSP_A mode require one bit delay from the FS, DSP_B is without data delay. When checking the requested format, also match the bit and fs inversion flag along with the format since it is not possible to change inversion. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Add support for pll and pdm source clock selectionPeter Ujfalusi1-4/+29
Instead of hard wiring the PLL_CLKIN and PDM_CLK to be sourced from BCLK add proper clock configuration via the set_dai_sysclk callback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: rt5645: Init jack_detect_work before registering irqNicolas Boichat1-2/+2
Prevents frequent panic on boot, if the irq handler rt5645_irq gets called before the workqueue rt5645_jack_detect_work is initialized. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-04ASoC: zx: fix platform_no_drv_owner.cocci warningskbuild test robot1-1/+0
sound/soc/zte/zx296702-i2s.c:428:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Rename mclk parameter to pll_clkin to match with the datasheetPeter Ujfalusi1-7/+7
MCLK is one of the possible source for the pll_clkin frequency. Make this clear by renaming the variable. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Simplify and reverse the functionality of tas2552_sw_shutdownPeter Ujfalusi1-5/+3
The function name and parameters of: tas2552_sw_shutdown(struct tas2552_data *tas_data, int sw_shutdown) implies that if sw_shutdown is 1 we should be entering to the software shutdown mode. The code can be simplified as well within the function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Simplify the tas2552_mute functionPeter Ujfalusi1-4/+2
Initialize the cfg1_reg to 0 and set the mute bit only when it is needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Correct CFG1 register bit definitionsPeter Ujfalusi2-16/+15
Remove the _MASK postfix of the bit definitions, collect the CFG1 bit definition in one place and correct the bit shifts at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Correct PDM configuration register bit definitionsPeter Ujfalusi2-7/+7
The PDM clock can be selected via bit0-1. PDM_DATA_ES bit is at bit2. The code were trying to select BCLK as PDM reference clock but instead it was selecting PLL and set the DATA_ES bit to 1. Selecting the PLL output as reference clock as default does make sense, but the driver should not change the PDM data edge. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entryPeter Ujfalusi1-1/+0
SOC_DAPM_SINGLE("Playback AMP", ..) should not be under kcontrols. It causes kernel crash (NULL pointer) when the mixers are listed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-04ASoC: tas2552: Fix kernel crash when the codec is loaded but not part of a cardPeter Ujfalusi1-0/+3
If the card is not part of any card the tas_data->codec is NULL since it is set only during snd_soc_codec_driver.probe, which is not yet called. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-04ASoC: tas2552: Make the enable-gpio really optionalPeter Ujfalusi1-2/+6
Do not fail the probe if the enable-gpio is not specifiedbut handle deferred probe case. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 11:32:21 +0000