summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2013-08-16ALSA: hda - Add a fixup for Gateway LT27Takashi Iwai1-0/+1
Gateway LT27 needs a fixup for the inverted digital mic. Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-15Merge tag 'asoc-v3.11-rc5' of ↵Takashi Iwai4-9/+23
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.11 A few driver specific fixes here plus one core fix for a memory corruption issue in DAPM initialisation which could lead to crashes.
2013-08-15Merge remote-tracking branch 'asoc/fix/tegra' into asoc-linusMark Brown1-1/+1
2013-08-15Merge remote-tracking branch 'asoc/fix/sgtl5000' into asoc-linusMark Brown1-4/+14
2013-08-15Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown1-3/+4
2013-08-15Merge remote-tracking branch 'asoc/fix/cs42l52' into asoc-linusMark Brown1-1/+4
2013-08-15ASoC: tegra: fix Tegra30 I2S capture parameter setupStephen Warren1-1/+1
The Tegra30 I2S driver was writing the AHUB interface parameters to the playback path register rather than the capture path register. This caused the capture parameters not to be configured at all, so if capturing using non-HW-default parameters (e.g. 16-bit stereo rather than 8-bit mono) the audio would be corrupted. With this fixed, audio capture from an analog microphone works correctly on the Cardhu board. Cc: stable@vger.kernel.org Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-12ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525Maksim A. Boyko1-0/+1
Add the volume control quirk for avoiding the kernel warning for the Logitech HD Webcam C525 as in the similar commit 36691e1be6ec551eef4a5225f126a281f8c051c2 for the Logitech HD Webcam C310. Reported-by: Maksim Boyko <maksim.a.boyko@gmail.com> Tested-by: Maksim Boyko <maksim.a.boyko@gmail.com> Cc: <stable@vger.kernel.org> # 3.10.5+ Signed-off-by: Maksim Boyko <maksim.a.boyko@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12ALSA: hda - Fix missing mute controls for CX5051Takashi Iwai1-3/+3
We've added a fake mute control (setting the amp volume to zero) for CX5051 at commit [3868137e: ALSA: hda - Add a fake mute feature], but this feature was overlooked in the generic parser implementation. Now the driver lacks of mute controls on these codecs. The fix is just to check both AC_AMPCAP_MUTE and AC_AMPCAP_MIN_MUTE bits in each place checking the amp capabilities. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59001 Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12ALSA: usb-audio: fix automatic Roland/Yamaha MIDI detectionClemens Ladisch1-3/+3
Commit aafe77cc45a5 (ALSA: usb-audio: add support for many Roland/Yamaha devices) had several logic errors that prevented create_auto_midi_quirk from enumerating any MIDI ports. Reported-by: Keith A. Milner <maillist@superlative.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12ALSA: 6fire: make buffers DMA-able (midi)Torsten Schenk2-6/+16
Patch makes midi output buffer DMA-able by allocating it separately. Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12ALSA: 6fire: make buffers DMA-able (pcm)Torsten Schenk2-2/+41
Patch makes pcm buffers DMA-able by allocating each one separately. Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12ALSA: hda - Add pinfix for LG LW25 laptopTakashi Iwai1-0/+10
Correct the pins for a line-in and a headphone on LG LW25 laptop with ALC880 codec. Other pins seem fine. Reported-and-tested-by: Joonas Saarinen <jonskunator@gmail.com> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-08ALSA: usb-audio: do not trust too-big wMaxPacketSize valuesClemens Ladisch1-7/+6
The driver used to assume that the streaming endpoint's wMaxPacketSize value would be an indication of how much data the endpoint expects or sends, and compute the number of packets per URB using this value. However, the Focusrite Scarlett 2i4 declares a value of 1024 bytes, while only about 88 or 44 bytes are be actually used. This discrepancy would result in URBs with far too few packets, which would not work correctly on the EHCI driver. To get correct URBs, use wMaxPacketSize only as an upper limit on the packet size. Reported-by: James Stone <jamesmstone@gmail.com> Tested-by: James Stone <jamesmstone@gmail.com> Cc: <stable@vger.kernel.org> # 2.6.35+ Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-07ALSA: 6fire: fix DMA issues with URB transfer_buffer usageJussi Kivilinna2-6/+34
Patch fixes 6fire not to use stack as URB transfer_buffer. URB buffers need to be DMA-able, which stack is not. Furthermore, transfer_buffer should not be allocated as part of larger device structure because DMA coherency issues and patch fixes this issue too. Cc: stable@vger.kernel.org Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Tested-by: Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06ASoC: cs42l52: Add new TLV for Beep VolumeBrian Austin1-1/+4
CS42L52 Beep control uses 2dB scale from -56dB Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06ASoC: cs42l52: Reorder Min/Max and update to SX_TLV for Beep VolumeBrian Austin1-1/+1
Beep Volume Min/Max was backwards. Change to SOC_SONGLE_SX_TLV for correct volume representation Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@kernel.org
2013-08-02ALSA: hda - Fix missing fixup for Mac Mini with STAC9221Takashi Iwai2-1/+2
A fixup for Apple Mac Mini was lost during the adaption to the generic parser because the fallback for the generic ID 8384:7680 was dropped, and it resulted in the silence output (and maybe other problems). Unfortunately, just adding the missing subsystem ID wasn't enough, in this case. The subsystem ID of this machine is 0000:0100 (what Apple thought...?), and since snd_hda_pick_fixup() doesn't take the vendor id zero into account, the driver ignored this entry. Now it's fixed to regard the vendor id zero as a valid value. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-01ASoC: dapm: Fix empty list check in dapm_new_mux()Lars-Peter Clausen1-3/+4
list_first_entry() will always return a valid pointer, even if the list is empty. So the check whether path is NULL will always be false. So we end up calling dapm_create_or_share_mixmux_kcontrol() with a path struct that points right in the middle of the widget struct and by trying to modify the path the widgets memory will become corrupted. Fix this by using list_emtpy() to check if the widget doesn't have any paths. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-08-01ASoC: sgtl5000: fix buggy 'Capture Attenuate Switch' controlLothar Waßmann1-1/+1
The SGTL5000 Capture Attenuate Switch (or "ADC Volume Range Reduction" as it is called in the manual) is single bit only. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01ASoC: sgtl5000: prevent playback to be muted when terminating concurrent captureLothar Waßmann1-3/+13
When a sound capture/playback is terminated while a playback/capture is running, power_vag_event() will clear SGTL5000_CHIP_ANA_POWER in the SND_SOC_DAPM_PRE_PMD event, thus muting the respective other channel. Don't clear SGTL5000_CHIP_ANA_POWER when both DAC and ADC are active to prevent this. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-01Merge tag 'asoc-v3.11-rc3' of ↵Takashi Iwai5-19/+18
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.11 A fix to make sure userspace knows when control writes have caused a change in value, fixing some UIs, plus a few few driver fixes mainly cleaning up issues from recent refactorings on less mainstream platforms.
2013-07-31Merge remote-tracking branch 'asoc/fix/wm0010' into asoc-linusMark Brown1-12/+12
2013-07-31Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown1-3/+2
2013-07-31Merge remote-tracking branch 'asoc/fix/blackfin' into asoc-linusMark Brown2-3/+3
2013-07-31ASoC: wm0010: Fix resource leakDimitris Papastamos1-12/+12
If kzalloc() fails for `img' then we are going to leak the memory for `out'. We are freeing the memory of all the tx/rx transfers but the tx/rx buf pointers will be NULL if we drop out earlier. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31ASoC: au1x: Fix buildRalf Baechle1-1/+1
d8b51c11ff5a70244753ba60abfd47088cf4dcd4 [ASoC: ac97c: Use module_platform_driver()] broke the build: CC sound/soc/au1x/ac97c.o /home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected identifier or ‘(’ before ‘&’ token /home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: pasting "__initcall_" and "&" does not give a valid preprocessing token /home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘&’ token /home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected identifier or ‘(’ before ‘&’ token /home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: pasting "__exitcall_" and "&" does not give a valid preprocessing token /home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:344:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘&’ token /home/ralf/src/linux/upstream-sfr/sound/soc/au1x/ac97c.c:334:31: warning: ‘au1xac97c_driver’ defined but not used [-Wunused-variable] make[5]: *** [sound/soc/au1x/ac97c.o] Error 1 make[4]: *** [sound/soc/au1x] Error 2 make[3]: *** [sound/soc] Error 2 Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30ASoC: bf5xx-ac97: Fix compile error with SND_BF5XX_HAVE_COLD_RESETLars-Peter Clausen1-2/+3
If CONFIG_SND_BF5XX_HAVE_COLD_RESET is enabled building the blackfin ac97 driver fails with the following compile error: sound/soc/blackfin/bf5xx-ac97.c: In function ‘asoc_bfin_ac97_probe’: sound/soc/blackfin/bf5xx-ac97.c:297: error: expected ‘;’ before ‘{’ token sound/soc/blackfin/bf5xx-ac97.c:302: error: label ‘gpio_err’ used but not defined The issue was introduced in commit 6dab2fd7 ("ASoC: bf5xx-ac97: Convert to devm_gpio_request_one()"). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29ASoC: bfin-ac97: Fix prototype error following AC'97 refactoringMark Brown1-1/+0
As part of the multiplatform refactoring for AC'97 the AC'97 bus ops were staticised meaning that the prototype (which was never needed) conflicts with the declaration causing build failures. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2013-07-29ALSA: compress: fix the return value for SNDRV_COMPRESS_VERSIONVinod Koul1-1/+1
the return value of SNDRV_COMPRESS_VERSION always return default -ENOTTY as the return value was never updated for this call assign return value from put_user() Reported-by: Haynes <hgeorge@codeaurora.org> CC: stable@vger.kernel.org Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-24ASoC: dapm: Fix return value of snd_soc_dapm_put_{volsw,enum_virt}()Lars-Peter Clausen1-3/+2
The ALSA core expect the put callback of a control to return 1 if the value of the control changed and 0 if it did not. Both snd_soc_dapm_put_volsw() and snd_soc_dapm_put_enum_virt() currently always returns 0. For both functions we already have a 'change' variable which either contains 1 or 0 depending on whether the value has changed or not, so just return that. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24Merge tag 'asoc-v3.11-rc2' of ↵Takashi Iwai6-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v3.11 A few small updates again, the sgtl5000 one fixes some newly triggered issues due to some probe ordering changes which were introduced in the last merge window.
2013-07-24ALSA: hiface: return correct XRUN indicationEldad Zack1-1/+1
Return SNDRV_PCM_POS_XRUN (snd_pcm_uframes_t) instead of SNDRV_PCM_STATE_XRUN (snd_pcm_state_t) from the pointer function of hiface, as expected by snd_pcm_update_hw_ptr0(). Caught by sparse. Cc: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-23Merge remote-tracking branch 'asoc/fix/tegra' into asoc-linusMark Brown2-5/+5
2013-07-23Merge remote-tracking branch 'asoc/fix/sgtl5000' into asoc-linusMark Brown1-0/+3
2013-07-23Merge remote-tracking branch 'asoc/fix/max98088' into asoc-linusMark Brown1-1/+1
2013-07-23Merge remote-tracking branch 'asoc/fix/ep93xx' into asoc-linusMark Brown1-2/+2
2013-07-22ASoC: tegra: correct playback_dma_data setupRichard Zhao2-5/+5
The errors were caused by copy/paste mistake in below commit since v3.10: 3489d50 ASoC: tegra: Use common DAI DMA data struct It also corrects slave_id initialization in tegra20_ac97 driver. Signed-off-by: Richard Zhao <rizhao@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: <stable@vger.kernel.org> # 3.10
2013-07-22ASoC: core: double free in snd_soc_add_platform()Dan Carpenter1-3/+1
There are three callers for this function, and none of them want it to free platform for them. It leads to a double free. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-21ALSA: usb-audio: 6fire: return correct XRUN indicationEldad Zack1-1/+1
Return SNDRV_PCM_POS_XRUN (snd_pcm_uframes_t) instead of SNDRV_PCM_STATE_XRUN (snd_pcm_state_t) from the pointer function of 6fire, as expected by snd_pcm_update_hw_ptr0(). Caught by sparse. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-19ASoC: ep93xx: fix build of ep93xx-ac97.cH Hartley Sweeten1-2/+2
Fix the build of this driver. It was broken by: Commit 453807f3006757a5661c4000262d7d9284b5214c ASoC: ep93xx: Use ep93xx_dma_params instead of ep93xx_pcm_dma_params The removed struct ep93xx_pcm_dma_params use the member 'dma_port' to select the dma channel. The struct ep93xx_dma_data uses the member 'port'. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19ALSA: hda - Remove NO_PRESENCE bit override for Dell 1420n LaptopTakashi Iwai1-1/+1
The quirk for Dell laptops with STAC9228 overrides the pin default config of NID 0x0f to the value with AC_DEFCFG_MISC_NO_PRESENCE bit on. I'm not quite sure why this was done so, but can guess that this was introduced for avoiding this to be muted by another headphone plug. Now, after transition to the generic parser, this workaround rather causes a problem (notably as unexpected speaker mutes) because the pin is seen as if it's always plugged in. Since the generic parser can handle multiple headphone plugging gracefully, we can get rid of this override now. Reported-and-tested-by: Eric Shattow <lucent@gmail.com> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-19ALSA: hda - Fix EAPD GPIO control for Sigmatel codecsTakashi Iwai1-5/+6
The EAPD GPIO is dynamically turned on/off for some machines with Sigmatel codecs, but this didn't work as expected, and it resulted in spontaneous lost of speaker outputs per HP plugging or power-saving. This patch fixes the bug by simply including spec->eapd_mask into spec->gpio_mask and spec->gpio_data bits. Reported-and-tested-by: Eric Shattow <lucent@gmail.com> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-17ALSA: seq-oss: Initialize MIDI clients asynchronouslyTakashi Iwai2-4/+14
We've got bug reports that the module loading stuck on Debian system with 3.10 kernel. The debugging session revealed that the initial registration of OSS sequencer clients stuck at module loading time, which involves again with request_module() at the init phase. This is triggered only by special --install stuff Debian is using, but it's still not good to have such loops. As a workaround, call the registration part asynchronously. This is a better approach irrespective of the hang fix, in anyway. Reported-and-tested-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-16ASoC: sgtl5000: defer the probe if clock is not foundShawn Guo1-0/+3
It's not always the case that clock is already available when sgtl5000 get probed at the first time, e.g. the clock is provided by CPU DAI which may be probed after sgtl5000. So let's defer the probe when devm_clk_get() call fails and give it chance to try later. It fixes the regression on imx28 since commit 9e13f34 (ASoC: sgtl5000: Let the codec acquire its clock). [ 1.927637] sgtl5000 0-000a: Failed to get mclock: -2 [ 1.934280] sgtl5000: probe of 0-000a failed with error -2 [ 1.945906] mxs-sgtl5000 sound.13: ASoC: CODEC (null) not registered [ 1.953787] mxs-sgtl5000 sound.13: snd_soc_register_card failed (-517) [ 1.960865] platform sound.13: Driver mxs-sgtl5000 requests probe deferral Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-16ALSA: hda - Add new GPU codec ID to snd-hdaAaron Plattner1-0/+2
Vendor ID 0x10de0060 is used by a yet-to-be-named GPU chip. Reviewed-by: Andy Ritger <aritger@nvidia.com> Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ASoC: s6000: Fix unlocked snd_pcm_stop() callTakashi Iwai1-0/+2
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ASoC: atmel: Fix unlocked snd_pcm_stop() callTakashi Iwai1-0/+2
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ALSA: pxa2xx: Fix unlocked snd_pcm_stop() callTakashi Iwai1-0/+2
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ALSA: usx2y: Fix unlocked snd_pcm_stop() callTakashi Iwai1-0/+4
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>