summaryrefslogtreecommitdiffstats
path: root/sound/usb
AgeCommit message (Collapse)AuthorFilesLines
2017-01-10ALSA: usb-audio: Add a quirk for Plantronics BT600Dennis Kadioglu1-0/+1
Plantronics BT600 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x1" and "cannot get freq at ep 0x82". This patch adds the USB ID of the BT600 to quirks.c and avoids those error messages. Signed-off-by: Dennis Kadioglu <denk@post.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05ALSA: usb-audio: test EP_FLAG_RUNNING at urb completionIoan-Adrian Ratiu1-0/+3
Testing EP_FLAG_RUNNING in snd_complete_urb() before running the completion logic allows us to save a few cpu cycles by returning early, skipping the pending urb in case the stream was stopped; the stop logic handles the urb and sets the completion callbacks to NULL. Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05ALSA: usb-audio: Fix irq/process data synchronizationIoan-Adrian Ratiu3-16/+13
Commit 16200948d83 ("ALSA: usb-audio: Fix race at stopping the stream") was incomplete causing another more severe kernel panic, so it got reverted. This fixes both the original problem and its fallout kernel race/crash. The original fix is to move the endpoint member NULL clearing logic inside wait_clear_urbs() so the irq triggering the urb completion doesn't call retire_capture/playback_urb() after the NULL clearing and generate a panic. However this creates a new race between snd_usb_endpoint_start()'s call to wait_clear_urbs() and the irq urb completion handler which again calls retire_capture/playback_urb() leading to a new NULL dereference. We keep the EP deactivation code in snd_usb_endpoint_start() because removing it will break the EP reference counting (see [1] [2] for info), however we don't need the "can_sleep" mechanism anymore because a new function was introduced (snd_usb_endpoint_sync_pending_stop()) which synchronizes pending stops and gets called inside the pcm prepare callback. It also makes sense to remove can_sleep because it was also removed from deactivate_urbs() signature in [3] so we benefit from more simplification. [1] commit 015618b90 ("ALSA: snd-usb: Fix URB cancellation at stream start") [2] commit e9ba389c5 ("ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream") [3] commit ccc1696d5 ("ALSA: usb-audio: simplify endpoint deactivation code") Fixes: f8114f8583bb ("Revert "ALSA: usb-audio: Fix race at stopping the stream"") Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-21Revert "ALSA: usb-audio: Fix race at stopping the stream"Takashi Iwai1-8/+4
This reverts commit 16200948d8353fe29a473a394d7d26790deae0e7. The commit was intended to cover the race condition, but it introduced yet another regression for devices with the implicit feedback, leading to a kernel panic due to NULL-dereference in an irq context. As the race condition that was addressed by the commit is very rare and the regression is much worse, let's revert the commit for rc1, and fix the issue properly in a later patch. Fixes: 16200948d835 ("ALSA: usb-audio: Fix race at stopping the stream") Reported-by: Ioan-Adrian Ratiu <adi@adirat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-12ALSA: hiface: Fix M2Tech hiFace driver sampling rate changeJussi Laako1-0/+2
Sampling rate changes after first set one are not reflected to the hardware, while driver and ALSA think the rate has been changed. Fix the problem by properly stopping the interface at the beginning of prepare call, allowing new rate to be set to the hardware. This keeps the hardware in sync with the driver. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-12ALSA: usb-audio: Eliminate noise at the start of DSD playback.Nobutaka Okabe1-1/+15
[Problem] In some USB DACs, a terrible pop noise comes to be heard at the start of DSD playback (in the following situations). - play first DSD track - change from PCM track to DSD track - change from DSD64 track to DSD128 track (and etc...) - seek DSD track - Fast-Forward/Rewind DSD track [Cause] At the start of playback, there is a little silence. The silence bit pattern "0x69" is required on DSD mode, but it is not like that. [Solution] This patch adds DSD silence pattern to the endpoint settings. Signed-off-by: Nobutaka Okabe <nob77413@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-12ALSA: usb-audio: Add native DSD support for TEAC 501/503 DACNobutaka Okabe1-0/+38
This patch adds native DSD support for the following devices. - TEAC NT-503 - TEAC UD-503 - TEAC UD-501 (1) Add quirks for native DSD support for TEAC devices. (2) A specific vendor command is needed to switch between PCM/DOP and DSD mode, same as Denon/Marantz devices. Signed-off-by: Nobutaka Okabe <nob77413@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-09Merge branch 'for-linus' into for-nextTakashi Iwai2-5/+10
2016-12-09ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirksCon Kolivas1-1/+2
The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the following warning. [ 6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Adding it to the list of devices in volume_control_quirks makes it work properly, fixing related typo. Signed-off-by: Con Kolivas <kernel@kolivas.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-09ALSA: usb-audio: add implicit fb quirk for Axe-Fx IIAlberto Aguirre1-0/+10
The Axe-Fx II implicit feedback end point and the data sync endpoint are in different interface descriptors. Add quirk to ensure a sync endpoint is properly configured. Signed-off-by: Alberto Aguirre <albaguirre@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-06ALSA: usb-audio: more tolerant packetsizeAndreas Pape1-2/+2
since commit 57e6dae1087b ("ALSA: usb-audio: do not trust too-big wMaxPacketSize values"), the expected packetsize is always limited to nominal + 25%. It was discovered, that some devices (Android audio accessory) have a much higher jitter in used packetsizes than 25% which would result in BABBLE condition and dropping of packets. A better solution is so assume the jitter to be the nominal packetsize: -one nearly empty packet followed by a almost 150% sized one. V2: changed to assume max frequency is +50 of nominal packetsize. Signed-off-by: Andreas Pape <apape@de.adit-jv.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-06ALSA: usb-audio: avoid setting of sample rate multiple times on busDaniel Girnus1-10/+11
Some of userland applications call 'snd_pcm_hw_params()' and 'snd_pcm_hw_prepare()' sequentially, which means 'snd_pcm_hw_prepare()' is called twice and the second 'snd_pcm_hw_prepare()' is called in 'SNDRV_PCM_STATE_PREPARED' state. Some devices are not able to manage this and they will stop playback if the sample rate will be configured several times over USB protocol. V2: updated Changelog Signed-off-by: Daniel Girnus <dgirnus@de.adit-jv.com> Signed-off-by: Jens Lorenz <jlorenz@de.adit-jv.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-05ALSA: usb-audio: Fix race at stopping the streamTakashi Iwai1-4/+8
We've got a kernel crash report showing like: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = a1d7c000 [00000008] *pgd=31c93831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM CPU: 0 PID: 250 Comm: dbus-daemon Not tainted 3.14.51-03479-gf50bdf4 #1 task: a3ae61c0 ti: a08c8000 task.ti: a08c8000 PC is at retire_capture_urb+0x10/0x1f4 [snd_usb_audio] LR is at snd_complete_urb+0x140/0x1f0 [snd_usb_audio] pc : [<7f0eb22c>] lr : [<7f0e57fc>] psr: 200e0193 sp : a08c9c98 ip : a08c9ce8 fp : a08c9ce4 r10: 0000000a r9 : 00000102 r8 : 94cb3000 r7 : 94cb3000 r6 : 94d0f000 r5 : 94d0e8e8 r4 : 94d0e000 r3 : 7f0eb21c r2 : 00000000 r1 : 94cb3000 r0 : 00000000 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 31d7c04a DAC: 00000015 Process dbus-daemon (pid: 250, stack limit = 0xa08c8238) Stack: (0xa08c9c98 to 0xa08ca000) ... Backtrace: [<7f0eb21c>] (retire_capture_urb [snd_usb_audio]) from [<7f0e57fc>] (snd_complete_urb+0x140/0x1f0 [snd_usb_audio]) [<7f0e56bc>] (snd_complete_urb [snd_usb_audio]) from [<80371118>] (__usb_hcd_giveback_urb+0x78/0xf4) [<803710a0>] (__usb_hcd_giveback_urb) from [<80371514>] (usb_giveback_urb_bh+0x8c/0xc0) [<80371488>] (usb_giveback_urb_bh) from [<80028e3c>] (tasklet_hi_action+0xc4/0x148) [<80028d78>] (tasklet_hi_action) from [<80028358>] (__do_softirq+0x190/0x380) [<800281c8>] (__do_softirq) from [<80028858>] (irq_exit+0x8c/0xfc) [<800287cc>] (irq_exit) from [<8000ea88>] (handle_IRQ+0x8c/0xc8) [<8000e9fc>] (handle_IRQ) from [<800085e8>] (gic_handle_irq+0xbc/0xf8) [<8000852c>] (gic_handle_irq) from [<80509044>] (__irq_svc+0x44/0x78) [<80508820>] (_raw_spin_unlock_irq) from [<8004b880>] (finish_task_switch+0x5c/0x100) [<8004b824>] (finish_task_switch) from [<805052f0>] (__schedule+0x48c/0x6d8) [<80504e64>] (__schedule) from [<805055d4>] (schedule+0x98/0x9c) [<8050553c>] (schedule) from [<800116c8>] (do_work_pending+0x30/0xd0) [<80011698>] (do_work_pending) from [<8000e160>] (work_pending+0xc/0x20) Code: e1a0c00d e92ddff0 e24cb004 e24dd024 (e5902008) Kernel panic - not syncing: Fatal exception in interrupt There is a race between retire_capture_urb() and stop_endpoints(). The latter is called at stopping the stream and it sets some endpoint fields to NULL. But its call is asynchronous, thus the pending complete callback might get called after these NULL clears, and it leads the NULL dereference like the above. The fix is to move the NULL clearance after the synchronization, i.e. wait_clear_urbs(). This is called at prepare and hw_free callbacks, so it's assured to be called before the restart of the stream or the release of the stream. Also, while we're at it, put the EP_FLAG_RUNNING flag check at the beginning of snd_complete_urb() to skip the pending complete after the stream is stopped. Fixes: b2eb950de2f0 ("ALSA: usb-audio: stop both data and sync...") Reported-by: Jiada Wang <jiada_wang@mentor.com> Reported-by: Mark Craske <Mark_Craske@mentor.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-29ALSA: usb-audio: Fix bogus error return in snd_usb_create_stream()Takashi Iwai1-1/+0
The function returns -EINVAL even if it builds the stream properly. The bogus error code sneaked in during the code refactoring, but it wasn't noticed until now since the returned error code itself is ignored in anyway. Kill it here, but there is no behavior change by this patch, obviously. Fixes: e5779998bf8b ('ALSA: usb-audio: refactor code') Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-29ALSA: line6: Claim pod x3 usb data interfaceAndrej Krutak2-4/+31
Userspace apps have to claim USB interfaces before using endpoints in them (drivers/usb/core/devio.c:checkintf()). It's a lock mechanism so that two "drivers" don't steal data from each other. Kernel drivers don't have to claim interfaces to work - but they should, to lock out userspace. While there, fix line6_properties struct to match checkpatch.pl. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-14ALSA: usb-audio: Fix use-after-free of usb_device at disconnectTakashi Iwai1-1/+2
The usb-audio driver implements the deferred device disconnection for the device in use. In this mode, the disconnection callback returns immediately while the actual ALSA card object removal happens later when all files get closed. As Shuah reported, this code flow, however, leads to a use-after-free, detected by KASAN: BUG: KASAN: use-after-free in snd_usb_audio_free+0x134/0x160 [snd_usb_audio] at addr ffff8801c863ce10 Write of size 8 by task pulseaudio/2244 Call Trace: [<ffffffff81b31473>] dump_stack+0x67/0x94 [<ffffffff81564ef1>] kasan_object_err+0x21/0x70 [<ffffffff8156518a>] kasan_report_error+0x1fa/0x4e0 [<ffffffff81564ad7>] ? kasan_slab_free+0x87/0xb0 [<ffffffff81565733>] __asan_report_store8_noabort+0x43/0x50 [<ffffffffa0fc0f54>] ? snd_usb_audio_free+0x134/0x160 [snd_usb_audio] [<ffffffffa0fc0f54>] snd_usb_audio_free+0x134/0x160 [snd_usb_audio] [<ffffffffa0fc0fb1>] snd_usb_audio_dev_free+0x31/0x40 [snd_usb_audio] [<ffffffff8243c78a>] __snd_device_free+0x12a/0x210 [<ffffffff8243d1f5>] snd_device_free_all+0x85/0xd0 [<ffffffff8242cae4>] release_card_device+0x34/0x130 [<ffffffff81ef1846>] device_release+0x76/0x1e0 [<ffffffff81b37ad7>] kobject_release+0x107/0x370 ..... Object at ffff8801c863cc80, in cache kmalloc-2048 size: 2048 Allocated: [<ffffffff810804eb>] save_stack_trace+0x2b/0x50 [<ffffffff81564296>] save_stack+0x46/0xd0 [<ffffffff8156450d>] kasan_kmalloc+0xad/0xe0 [<ffffffff81560d1a>] kmem_cache_alloc_trace+0xfa/0x240 [<ffffffff8214ea47>] usb_alloc_dev+0x57/0xc90 [<ffffffff8216349d>] hub_event+0xf1d/0x35f0 .... Freed: [<ffffffff810804eb>] save_stack_trace+0x2b/0x50 [<ffffffff81564296>] save_stack+0x46/0xd0 [<ffffffff81564ac1>] kasan_slab_free+0x71/0xb0 [<ffffffff81560929>] kfree+0xd9/0x280 [<ffffffff8214de6e>] usb_release_dev+0xde/0x110 [<ffffffff81ef1846>] device_release+0x76/0x1e0 .... It's the code trying to clear drvdata of the assigned usb_device where the usb_device itself was already released in usb_release_dev() after the disconnect callback. This patch fixes it by checking whether the code path is via the disconnect callback, i.e. chip->shutdown flag is set. Fixes: 79289e24194a ('ALSA: usb-audio: Refer to chip->usb_id for quirks...') Reported-and-tested-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-27ALSA: usb-audio: Add quirk for Syntek STK1160Marcel Hasler1-0/+17
The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves the issue reported on the mailing list (http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071). Signed-off-by: Marcel Hasler <mahasler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-12ALSA: line6: fix a crash in line6_hwdep_write()Dan Carpenter1-2/+2
The error checking here is messed up so we could end up dereferencing -EFAULT. Fixes: a16039cbf1a1 ('ALSA: line6: Add hwdep interface to access the POD control messages') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-10ALSA: line6: Fix POD X3 Live audio inputAndrej Krutak1-1/+2
The commit c039aaa77a7d1d9375665a8b59ec16dc7d23e259 was incomplete, missing part of the setup for Live. This makes also audio input work, in addition to audio output. Fixes: c039aaa77a7d1d9375665a8b59ec16dc7d23e259 Reported-by: Eddi De Pieri <eddi@depieri.net> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-29Merge branch 'for-linus' into for-nextTakashi Iwai1-6/+16
2016-09-25ALSA: usb-line6: use the same declaration as definition in header for MIDI ↵Takashi Sakamoto1-1/+1
manufacturer ID Currently, usb-line6 module exports an array of MIDI manufacturer ID and usb-pod module uses it. However, the declaration is not the definition in common header. The difference is explicit length of array. Although compiler calculates it and everything goes well, it's better to use the same representation between definition and declaration. This commit fills the length of array for usb-line6 module. As a small good sub-effect, this commit suppress below warnings from static analysis by sparse v0.5.0. sound/usb/line6/driver.c:274:43: error: cannot size expression sound/usb/line6/driver.c:275:16: error: cannot size expression sound/usb/line6/driver.c:276:16: error: cannot size expression sound/usb/line6/driver.c:277:16: error: cannot size expression Fixes: 705ececd1c60 ("Staging: add line6 usb driver") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-23ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variantsAnssi Hannula1-6/+16
The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") applies a custom dB map on the volume control when its range is reported as 0..50 (0 .. 0.2dB). However, there exists at least one other variant (hw v1.0c, as opposed to the tested v1.2) which reports a different non-sensical volume range (0..53) and the custom map is therefore not applied for that device. This results in all of the volume change appearing close to 100% on mixer UIs that utilize the dB TLV information. Add a fallback case where no dB TLV is reported at all if the control range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also restrict the quirk to only apply to the volume control as there is also a mute control which would match the check otherwise. Fixes: 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Reported-by: David W <regulars@d-dub.org.uk> Tested-by: David W <regulars@d-dub.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-21ALSA: line6: snd-usb-line6 depends on CONFIG_SND_HWDEPValdis Kletnieks1-0/+1
ERROR: "snd_hwdep_new" [sound/usb/line6/snd-usb-line6.ko] undefined! scripts/Makefile.modpost:91: recipe for target '__modpost' failed make[1]: *** [__modpost] Error 1 Fixes: a16039cbf1a1 ('ALSA: line6: Add hwdep interface to access the POD control messages') Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-20ALSA: line6: fix ifnullfree.cocci warningskbuild test robot1-2/+1
sound/usb/line6/driver.c:484:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci CC: Andrej Krutak <dev@andree.sk> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add hwdep interface to access the POD control messagesAndrej Krutak2-6/+169
We must do it this way, because e.g. POD X3 won't play any sound unless the host listens on the bulk EP, so we cannot export it only via libusb. The driver currently doesn't use the bulk EP messages in other way, in future it could e.g. sense/modify volume(s). Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Cleanup podhd initializationAndrej Krutak1-11/+8
Only initialize PCM for POD HD devices that support it. No POD HD seems to support MIDI, thus drop the initialization. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Only determine control port properties if neededAndrej Krutak1-2/+1
Not all line6 devices use the control port. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3)Andrej Krutak1-0/+13
Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add support for POD X3Andrej Krutak2-15/+265
This includes audio in/out and basic initialization via control EP (emulates what original driver does). The initialization is done similarly to original POD, firmware and serial IDs are read and exported via sysfs. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Allow processing of raw incoming messagesAndrej Krutak3-29/+41
Not all PODs use MIDI via USB data interface, thus allow avoiding that code and instead using direct processing. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP)Andrej Krutak4-25/+68
POD X3 can initialize similarly to older PODs, but it doesn't have the MIDI interface. Instead, configuration is done via proprietary bulk EP messages. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during captureAndrej Krutak5-11/+37
E.g. POD X3 seems to require playback data to be sent to it to generate capture data. Otherwise the device stalls and doesn't send any more capture data until it's reset. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Allow different channel numbers for in/outAndrej Krutak7-13/+22
Changes bytes_per_frame to bytes_per_channel. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Support assymetrical in/out configurationsAndrej Krutak4-22/+28
Splits max_packet_size to max_packet_size_in/out (e.g. for different channel counts). Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add high-speed USB supportAndrej Krutak5-14/+35
This has two parts: * intervals_per_second setup (high speed needs 8000, instead of 1000) * iso_buffers setup (count of iso buffers depends on USB speed, 2 is not enough for high speed) Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Enable different number of URBs for frame transfersAndrej Krutak6-21/+41
This basically changes LINE6_ISO_BUFFERS constant to a configurable iso_buffers property. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-11Merge branch 'for-linus' into for-nextTakashi Iwai3-7/+9
Back-merge from for-linus just to make the further development easier.
2016-08-29ALSA: usb-audio: Add sample rate inquiry quirk for B850V3 CP2114Ken Lin1-0/+1
Avoid getting sample rate on B850V3 CP2114 as it is unsupported and causes noisy "current rate is different from the runtime rate" messages when playback starts. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: usb-audio: rmove print for failure of kmallocShawn Lin1-3/+1
kmalloc already print similar error once failing to alloc enough memory, so let's remove this dump here. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: usb: fine-tune Tenor error compensation valueDaniel Mack1-2/+2
Users of devices affected by the Tenor feedback data error report buffer underruns, even with the +/- 0x1.0000 quirk applied. Compensating the error with 0xf000 instead seems to reliably fix that issue. See https://sourceforge.net/p/alsa/mailman/message/35230259/ Reported-and-tested-by: Norman Nolte <norman.nolte@gmx.net> Reported-and-tested-by: Thomas Gresens <T.Gresens@intershop.de> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: usb: use TEAC UD-H01 quirk for more devicesDaniel Mack3-5/+7
The quirk seems to be necessary not only for TEAC UD-H01 devices, but to more that are based on the Tenor 8802TL chipset. Devices built by T+A are affected too, and they apparently all use the same USB PID:PID. Extend the quirky handling for that device as well, and rename the quirks flag. Reported-and-tested-by: Thomas Gresens <T.Gresens@intershop.de> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: usb: move udh01_fb_quirk setting to quirks.cDaniel Mack2-4/+5
That's a quirk, after all, so move it where to all the other quirks live. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: line6: Fix POD sysfs attributes segfaultAndrej Krutak1-6/+6
The commit 02fc76f6a changed base of the sysfs attributes from device to card. The "show" callbacks dereferenced wrong objects because of this. Fixes: 02fc76f6a7db ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: line6: Give up on the lock while URBs are released.Andrej Krutak1-0/+2
Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(), which in turn invokes audio_out_callback(), which tries to lock 2nd time. Fixes: ============================================= [ INFO: possible recursive locking detected ] 4.4.15+ #15 Not tainted --------------------------------------------- mplayer/3591 is trying to acquire lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6] but task is already holding lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&line6pcm->out.lock)->rlock); lock(&(&line6pcm->out.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mplayer/3591: #0: (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm] #1: (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm] #2: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] stack backtrace: CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15 Hardware name: Generic AM33XX (Flattened Device Tree) [<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14) [<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac) [<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780) [<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0) [<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c) [<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6]) [<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0) [<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98) [<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114) [<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98) [<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6]) [<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6]) [<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6]) [<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm]) [<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm]) [<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm]) [<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm]) [<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm]) [<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm]) [<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm]) [<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8) Fixes: 63e20df1e5b2 ('ALSA: line6: Reorganize PCM stream handling') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: line6: Remove double line6_pcm_release() after failed acquire.Andrej Krutak1-1/+0
If there's an error, pcm is released in line6_pcm_acquire already. Fixes: 247d95ee6dd2 ('ALSA: line6: Handle error from line6_pcm_acquire()') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-11ALSA: usb: caiaq: audio: don't print error when allocating urb failsWolfram Sang1-1/+0
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09ALSA: usb-audio: Add quirk for ELP HD USB CameraVittorio Gambaletta (VittGam)1-0/+1
The ELP HD USB Camera (05a3:9420) needs this quirk for suppressing the unsupported sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Cc: <stable@vger.kernel.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09ALSA: usb-audio: Add a sample rate quirk for Creative Live! Cam Socialize HD ↵Piotr Karasinski1-0/+1
(VF0610) VF0610 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x82". This patch adds the USB ID (0x041E:4080) to snd_usb_get_sample_rate_quirk() list. Signed-off-by: Piotr Karasinski <peter.karasinski@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-25Merge branch 'for-next' into for-linusTakashi Iwai1-2/+4
Merged 4.8 changes.
2016-07-18ALSA: usb-audio: Fix quirks code is not calledKazuki Oikawa1-1/+1
snd_usb_{set_interface,ctl_msg}_quirk checks chip->usb_id to need calling a quirks code. But existed code path that not calling dev_set_drvdata in usb_audio_probe. Fixes: 79289e24194a ("ALSA: usb-audio: Refer to chip->usb_id for quirks and MIDI creation") Signed-off-by: Kazuki Oikawa <k@oikw.org> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 07:32:46 +0000