summaryrefslogtreecommitdiffstats
path: root/sound/soc
AgeCommit message (Collapse)AuthorFilesLines
2010-12-22ASoC: Add initial WM8995 driverDimitris Papastamos4-0/+10573
The WM8995 is a digital audio hub CODEC designed for smartphones. The current driver supports most of the basic functionality of the WM8995. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-22ASoC: SAMSUNG: Debug wrong parameterSeungwhan Youn1-1/+1
snd_soc_jack_new()'s first parameter was changed from snd_soc_card to snd_soc_codec after Multi-Component support patches. So, this patch fixes parameter that we missed. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-22ASoC: Add jack IRQ trace to 88pm860x driverMark Brown1-0/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22ASoC: Trace Wolfson jack detection IRQsMark Brown4-0/+17
Add jack detection interrupt trace to Wolfson CODEC drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22ASoC: Use delayed work to debounce WM8350 jack IRQsMark Brown1-19/+43
This avoids blocking the IRQ thread and allows further bounces to extend the debounce time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-21ASoC: sh: fsi: modify improper dependentKuninori Morimoto1-2/+2
FSI-AK4642 and FSI-DA7210 are depend on I2C, not I2C_SH_MOBILE Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-21ASoC: Make LZO cache compression optionalMark Brown2-2/+19
Make LZO cache compression optional as it pulls in the kernel wide LZO implementation and rbtree compression is generally more efficient for typical register maps, especially in terms of CPU performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-21ASoC: If we can't find a cache compression type default to flatMark Brown1-3/+6
This makes it easier to make cache types build time configurable as we don't have a hard dependency on a given cache being built in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-21ASoC: Fix WM8994/58 3D stereo control definitionsMark Brown1-3/+3
Cut'n'paste in the register names. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-21ASoC: Remove some unused defines from WM8903Mark Brown1-4/+0
These would have been used if we'd done manual clock divider setup, but we didn't. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-20ASoC: SMDKV310: Add I2S supportJassi Brar3-0/+186
Add ASoC machine driver for SMDKV310/C210 boards that have a WM8994 attached to I2S-0. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDKV310: Enable AC97 deviceJassi Brar2-2/+3
Enable AC97 audio device on SMDKV310/C210. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDKC110: Enable I2S deviceJassi Brar2-2/+2
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDKV210: Enable I2S deviceJassi Brar2-2/+3
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDK6442: Enable I2S deviceJassi Brar2-3/+3
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDK6450: Enable I2S deviceJassi Brar1-1/+1
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDK6440: Enable I2S deviceJassi Brar1-2/+2
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDK_WM8580: Make I2S0 as default daiJassi Brar1-7/+7
Since most newer SMDKs have I2S0 routed to the WM8580's Primary DAI, future changes can be minimized if the default CPU DAIs are set to 0, rather than 2. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: Samsung: I2S: Flush FIFO after stopJassi Brar1-5/+5
Flush the FIFO while stopping the channel rather than starting. This saves time during stream start and keeps the FIFOs clean when the channel is idling. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: Samsung: Set default rclk source rateJassi Brar1-0/+2
Since the rclk_srcrate is cleared upon startup, it should be initialized upon second and later 'open' calls to the device with same root-clock source. The bug is otherwise visible in Codec-Slave mode. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17Merge branch 'topic/asoc' of ↵Mark Brown8-219/+844
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.38
2010-12-17ASoC: soc-dapm: Introduce the new snd_soc_dapm_virt_mux typeDimitris Papastamos1-0/+19
This new type is a virtual version of snd_soc_dapm_mux. It is used when a backing register value is not necessary for deciding which input path to connect. A simple virtual enumeration control e.g. SOC_DAPM_ENUM_VIRT() can be exposed to userspace which will be used to choose which path to connect. The snd_soc_dapm_virt_mux type ensures that during the initial path setup, the first (which is also the default) input path will be connected. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17Merge branch 'for-2.6.38' of ↵Takashi Iwai8-219/+844
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2010-12-17ASoC: sh: fsi: Add over/under run counterKuninori Morimoto1-27/+49
Current FSI driver had printed under/over run error if status register have its error bit. But runtime print cause the next error because print out is slow. This patch add error counter and print error when sound stop Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17ASoC: sh: fsi: move fsi_irq_enable function to fsi_dai_triggerKuninori Morimoto1-3/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17ASoC: Do DAPM control updates in the middle of DAPM sequencesMark Brown1-58/+72
Attempt to minimise audible effects from mixer and mux updates by implementing the actual register changes between powering down widgets that have become unused and powering up widgets that are newly used. This means that we're making the change with the minimum set of widgets powered, that the input path is connected when we're powering up widgets (so things like DC offset correction can run with their signal active) and that we bring things down to cold before switching away. Since hardware tends to be designed for the power on/off case more than for dynamic reconfiguration this should minimise pops and clicks during reconfiguration while active. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-16ASoC: twl6040: Add ramp up/down volume for HS and HFMargarita Olaya Cabrera1-12/+521
Add ramp functions for the headset and handsfree outputs in order to reduce the pops during power on/off sequences. In order to give more control to volume ramp, step size and delay between steps can be specified. The patches are based on wm8350 implementation from Liam Girdwood. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-15ASoC: twl6040: Set default gains to minimun valueOlaya, Margarita1-0/+9
Updated default values to improve power consumption. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-15ASoC: Extend DAPM to handle power changes on cross-device pathsJarkko Nikula2-46/+65
Power change event like stream start/stop or kcontrol change in a cross-device path originates from one device but codec bias and widget power changes must be populated to another devices on that path as well. This patch modifies the dapm_power_widgets so that all the widgets on a sound card are checked for a power change, not just those that are specific to originating device. Also bias management is extended to check all the devices. Only exception in bias management are widgetless codecs whose bias state is changed only if power change is originating from that context. DAPM context test is added to dapm_seq_run to take care of if power sequence extends to an another device which requires separate register writes. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-15ASoC: Move widgets from DAPM context to snd_soc_cardJarkko Nikula3-22/+53
Decoupling widgets from DAPM context is required when extending the ASoC core to cross-device paths. Even the list of widgets are now kept in struct snd_soc_card, the widget listing in sysfs and debugs remain sorted per device. This patch makes possible to build cross-device paths but does not extend yet the DAPM to handle codec bias and widget power changes of an another device. Cross-device paths are registered by listing the widgets from device A in a map for device B. In case of conflicting widget names between the devices, a uniform name prefix is needed to separate them. See commit ead9b91 "ASoC: Add optional name_prefix for kcontrol, widget and route names" for help. An example below shows a path that connects MONO out of A into Line In of B: static const struct snd_soc_dapm_route mapA[] = { {"MONO", NULL, "DAC"}, }; static const struct snd_soc_dapm_route mapB[] = { {"Line In", NULL, "MONO"}, }; Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-15ASoC: Move DAPM paths from DAPM context to snd_soc_cardJarkko Nikula3-16/+29
Decoupling DAPM paths from DAPM context is a first prerequisite when extending ASoC core to cross-device paths. This patch is almost a nullop and does not allow to construct cross-device setup but the path clean-up part in dapm_free_widgets is prepared to remove cross-device paths between a device being removed and others. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-14ASoC: twl6040: Use correct offset for LineInAmp RightMisael Lopez Cruz1-1/+1
Gain for LineInAmp Right uses LINEGAIN[5:3], which means that offset for right channel should be 4. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Fix TLV dB step values for gainsOlaya, Margarita1-2/+2
Some gains were incorrectly configured for dB values. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Increase timeout for power upJorge Eduardo Candelaria1-1/+1
After coming back from suspend, the timeout waiting for Phoenix chip to complete its power up sequence is not enough, which leaves the codec cache value for some registers in an outdated state. Increase the timeout value to wait for the power up sequence to correclty complete. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Enable plug detection interruptsMisael Lopez Cruz2-7/+4
Enable plug detection interrupt mask in order to get headset PLUGINT/UNPLUGINT interrupts. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Clear interrupt status at boot timeJorge Eduardo Candelaria1-10/+11
On Phoenix 1.1, the INTID register default value is an invalid one, causing the interrupt handler to think the phoenix power on sequence is ready before it actually finishes. This causes some i2c errors when trying to configure twl. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Enable automatic power for phoenix 1.1Olaya, Margarita1-4/+9
Phoenix 1.1 supports automatic power on sequence, a verification is added to use it with new revision of the chip. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Fix analog Mic L & R mux controlsFrancois Mazard1-2/+2
The mux control has 4 elements not 3 Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Support other sample rates.Olaya, Margarita1-1/+8
The twl6040 can support more sample rates other than 88.2 and 96k. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Fix PCM error handling opsOlaya, Margarita1-33/+22
This patch moves all the PCM error handling for clock config out of trigger() and startup() and into prepare(). Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Restore bias level at resumeOlaya, Margarita1-0/+1
This patch restores the CODEC bias level at resume(). Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Add headset and handset mux controlsJorge Eduardo Candelaria1-27/+73
This patch adds support for the twl6040 headset and handset MUX controls. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Modify the IRQ handlerOlaya, Margarita1-18/+12
Multiples interrupts can be received. The irq handler is modified to attend all of them. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Update twl IO macroOlaya, Margarita1-4/+4
Update the codec to use the new twl core register macros Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: sdp4430: Add Jack supportJorge Eduardo Candelaria1-0/+32
Use jack framework to enable detection for the headset microphone and stereo output in the sdp4430. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: David Anders <x0132446@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Add jack support for headset and handsetJorge Eduardo Candelaria2-0/+74
This patch adds support for reporting twl6040 headset and handset jack events. The machine driver retrieves and report the status through twl6040_hs_jack_detect. A workq is used to debounce of the irq. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: TWL4030: Fix 24bit supportPeter Ujfalusi1-2/+3
twl4030 series of codecs supports S32_LE with msbits=24. Replace the S24_LE with S32_LE format, and add constraint for 24msbit in case of 32 S32_LE format. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: soc-cache: A few minor stylistic changesDimitris Papastamos1-7/+7
Remove redundant parentheses/spaces in the use of the sizeof operator. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-14ASoC: Explicitly clear WM8993 ramp controls on power downMark Brown1-0/+6
This helps ensure that the ramp logic is reset when powering back up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: dapm: Add output driver widgetOlaya, Margarita1-0/+6
In some cases it was not possible to follow the appropiate power ON/OFF sequence like in cases where the PGA needs to be enabled before the driver and disabled before the PGA for pop reduction. Add a widget to support output driver (speaker, haptic, vibra, etc) drivers where power ON/OFF ordering is important. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-30 22:13:09 +0000