summaryrefslogtreecommitdiffstats
path: root/sound/soc
AgeCommit message (Collapse)AuthorFilesLines
2018-09-17Merge tag 'asoc-v4.19-rc4' of ↵Takashi Iwai19-28/+141
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.19 This is the usual set of small fixes scatterd around various drivers, plus one fix for DAPM and a UAPI build fix. There's not a huge amount that stands out here relative to anything else.
2018-09-12sound: don't call skl_init_chip() to reset intel skl socYu Zhao1-1/+1
Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which 1) sets bus->chip_init to prevent multiple entrances before device is stopped; 2) enables interrupt. We shouldn't use it for the purpose of resetting device only because 1) when we really want to initialize device, we won't be able to do so; 2) we are ready to handle interrupt yet, and kernel crashes when interrupt comes in. Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset device properly. Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-12Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation"Yu Zhao1-6/+4
This reverts commit 12eeeb4f4733bbc4481d01df35933fc15beb8b19. The patch doesn't fix accessing memory with null pointer in skl_interrupt(). There are two problems: 1) skl_init_chip() is called twice, before and after dma buffer is allocate. The first call sets bus->chip_init which prevents the second from initializing bus->corb.buf and rirb.buf from bus->rb.area. 2) snd_hdac_bus_init_chip() enables interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. There is a small window which skl_interrupt() can be called if irq has been acquired. If so, it crashes when using null dma buffer pointers. Will fix the problems in the following patches. Also attaching the crash for future reference. [ 16.949148] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI <snipped> [ 16.950903] Call Trace: [ 16.950906] <IRQ> [ 16.950918] skl_interrupt+0x19e/0x2d6 [snd_soc_skl] [ 16.950926] ? dma_supported+0xb5/0xb5 [snd_soc_skl] [ 16.950933] __handle_irq_event_percpu+0x27a/0x6c8 [ 16.950937] ? __irq_wake_thread+0x1d1/0x1d1 [ 16.950942] ? __do_softirq+0x57a/0x69e [ 16.950944] handle_irq_event_percpu+0x95/0x1ba [ 16.950948] ? _raw_spin_unlock+0x65/0xdc [ 16.950951] ? __handle_irq_event_percpu+0x6c8/0x6c8 [ 16.950953] ? _raw_spin_unlock+0x65/0xdc [ 16.950957] ? time_cpufreq_notifier+0x483/0x483 [ 16.950959] handle_irq_event+0x89/0x123 [ 16.950962] handle_fasteoi_irq+0x16f/0x425 [ 16.950965] handle_irq+0x1fe/0x28e [ 16.950969] do_IRQ+0x6e/0x12e [ 16.950972] common_interrupt+0x7a/0x7a [ 16.950974] </IRQ> <snipped> [ 16.951031] RIP: snd_hdac_bus_update_rirb+0x19b/0x4cf [snd_hda_core] RSP: ffff88015c807c08 [ 16.951036] ---[ end trace 58bf9ece1775bc92 ]--- Fixes: 2eeeb4f4733b ("ASoC: Intel: Skylake: Acquire irq after RIRB allocation") Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-10ASoC: cs4265: fix MMTLR Data switch controlSébastien Szymanski1-2/+2
The MMTLR bit is in the CS4265_SPDIF_CTL2 register at address 0x12 bit 0 and not at address 0x0 bit 1. Fix this. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-09-10ASoC: AMD: Ensure reset bit is cleared before configuringAkshu Agrawal1-0/+21
HW register descriptions says: "DMA Channel Reset...Software must confirm that this bit is cleared before reprogramming any of the channel configuration registers." There could be cases where dma stop errored out leaving dma channel in reset state. We need to ensure that before the start of another dma, channel is out of the reset state. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFERKuninori Morimoto2-1/+13
Current rsnd driver will fallback to PIO mode if it can't get DMA handler. But, DMA might return -EPROBE_DEFER when probe timing. This driver always fallback to PIO mode especially from commit ac6bbf0cdf4206c ("iommu: Remove IOMMU_OF_DECLARE") because of this reason. The DMA driver will be probed later, but sound driver might be probed as PIO mode in such case. This patch fixup this issue. Then, -EPROBE_DEFER is not error. Thus, let's don't indicate error message in such case. And it needs to call rsnd_adg_remove() individually if probe failed, because it registers clk which should be unregister. Maybe PIO fallback feature itself is not needed, but let's keep it so far. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06ASoC: rsnd: adg: care clock-frequency sizeKuninori Morimoto1-0/+5
ADG has buffer over flow bug if DT has more than 3 clock-frequency. This patch fixup this issue, and uses first 2 values. clock-frequency = <x y>; /* this is OK */ clock-frequency = <x y z>; /* this is NG */ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: fixup not to call clk_get/set under non-atomicJiada Wang3-6/+28
Clocking operations clk_get/set_rate, are non-atomic, they shouldn't be called in soc_pcm_trigger() which is atomic. Following issue was found due to execution of clk_get_rate() causes sleep in soc_pcm_trigger(), which shouldn't be blocked. We can reproduce this issue by following > enable CONFIG_DEBUG_ATOMIC_SLEEP=y > compile, and boot > mount -t debugfs none /sys/kernel/debug > while true; do cat /sys/kernel/debug/clk/clk_summary > /dev/null; done & > while true; do aplay xxx; done This patch adds support to .prepare callback, and moves non-atomic clocking operations to it. As .prepare is non-atomic, it is always called before trigger_start/trigger_stop. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 128, pid: 2242, name: aplay INFO: lockdep is turned off. irq event stamp: 5964 hardirqs last enabled at (5963): [<ffff200008e59e40>] mutex_lock_nested+0x6e8/0x6f0 hardirqs last disabled at (5964): [<ffff200008e623f0>] _raw_spin_lock_irqsave+0x24/0x68 softirqs last enabled at (5502): [<ffff200008081838>] __do_softirq+0x560/0x10c0 softirqs last disabled at (5495): [<ffff2000080c2e78>] irq_exit+0x160/0x25c Preemption disabled at:[ 62.904063] [<ffff200008be4d48>] snd_pcm_stream_lock+0xb4/0xc0 CPU: 2 PID: 2242 Comm: aplay Tainted: G B C 4.9.54+ #186 Hardware name: Renesas Salvator-X board based on r8a7795 (DT) Call trace: [<ffff20000808fe48>] dump_backtrace+0x0/0x37c [<ffff2000080901d8>] show_stack+0x14/0x1c [<ffff2000086f4458>] dump_stack+0xfc/0x154 [<ffff2000081134a0>] ___might_sleep+0x57c/0x58c [<ffff2000081136b8>] __might_sleep+0x208/0x21c [<ffff200008e5980c>] mutex_lock_nested+0xb4/0x6f0 [<ffff2000087cac74>] clk_prepare_lock+0xb0/0x184 [<ffff2000087cb094>] clk_core_get_rate+0x14/0x54 [<ffff2000087cb0f4>] clk_get_rate+0x20/0x34 [<ffff20000113aa00>] rsnd_adg_ssi_clk_try_start+0x158/0x4f8 [snd_soc_rcar] [<ffff20000113da00>] rsnd_ssi_init+0x668/0x7a0 [snd_soc_rcar] [<ffff200001133ff4>] rsnd_soc_dai_trigger+0x4bc/0xcf8 [snd_soc_rcar] [<ffff200008c1af24>] soc_pcm_trigger+0x2a4/0x2d4 Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-09-03ASoC: q6routing: initialize data correctlySrinivas Kandagatla1-1/+3
Some of the router data fields are left as default zeros which are valid dai ids, so initialize these to invalid value of -1. Without intializing these correctly get_session_from_id() can return incorrect session resulting in not closing the opened copp and messing up with the copp ref count. Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-31ASoC: tas6424: Save last fault register even when clearAndrew F. Davis1-3/+9
When there is no fault bit set in a fault register we skip the fault reporting section for that register. This also skips over saving that registers value. We save the value so we will not double report an error, but if an error clears then returns we will also not report it as we did not save the all cleared register value. Fix this by saving the fault register value in the all clear path. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-08-28ASoC: sigmadsp: safeload should not have lower byte limitDanny Smith1-2/+1
Fixed range in safeload conditional to allow safeload to up to 20 bytes, without a lower limit. Signed-off-by: Danny Smith <dannys@axis.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-28ASoC: wm8804: Add ACPI supportPierre-Louis Bossart1-1/+14
HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier. This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform. The scripts at https://github.com/thesofproject/acpi-scripts can be used to add the ACPI initrd overlays. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-28ASoC: rt5682: Change DAC/ADC volume scaleShuming Fan1-4/+4
The step of DAC/ADC volume scale changes from 0.375dB to 0.75dB Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-08-28ASoC: max98373: Added 10ms sleep after amp software resetRyan Lee1-0/+2
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-23treewide: correct "differenciate" and "instanciate" typosFinn Thain1-2/+2
Also add these typos to spelling.txt so checkpatch.pl will look for them. Link: http://lkml.kernel.org/r/88af06b9de34d870cb0afc46cfd24e0458be2575.1529471371.git.fthain@telegraphics.com.au Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-1/+1
Pull DMAengine updates from Vinod Koul: "This round brings couple of framework changes, a new driver and usual driver updates: - new managed helper for dmaengine framework registration - split dmaengine pause capability to pause and resume and allow drivers to report that individually - update dma_request_chan_by_mask() to handle deferred probing - move imx-sdma to use virt-dma - new driver for Actions Semi Owl family S900 controller - minor updates to intel, renesas, mv_xor, pl330 etc" * tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: Add Actions Semi Owl family S900 DMA driver dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr() dmaengine: mic_x100_dma: use the new helper to simplify the code dmaengine: add a new helper dmaenginem_async_device_register dmaengine: imx-sdma: add memcpy interface dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff' dmaengine: dma_request_chan_by_mask() to handle deferred probing dmaengine: pl330: fix irq race with terminate_all dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST" dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address dmaengine: mv_xor_v2: enable COMPILE_TEST dmaengine: mv_xor_v2: move unmap to before callback dmaengine: mv_xor_v2: convert callback to helper function dmaengine: mv_xor_v2: kill the tasklets upon exit dmaengine: mv_xor_v2: explicitly freeup irq dmaengine: sh: rcar-dmac: Add dma_pause operation dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier dmaengine: idma64: Support dmaengine_terminate_sync() dmaengine: hsu: Support dmaengine_terminate_sync() ...
2018-08-16ASoC: rt5514: Fix the issue of the delay volume applied againOder Chiou1-4/+4
After our evaluation, we need to modify the default values to make sure the volume applied immediately. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-16ASoC: max98373: Added speaker FS gain cotnrol register to volatile.Ryan Lee1-0/+1
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-15ASoC: dapm: Fix NULL pointer deference on CODEC to CODEC DAIsCharles Keepax2-2/+6
Commit a655de808cbde ("ASoC: core: Allow topology to override machine driver FE DAI link config.") caused soc_dai_hw_params to be come dependent on the substream private_data being set with a pointer to the snd_soc_pcm_runtime. Currently, CODEC to CODEC links don't set this, which causes a NULL pointer dereference: [<4069de54>] (soc_dai_hw_params) from [<40694b68>] (snd_soc_dai_link_event+0x1a0/0x380) Since the ASoC core in general assumes that the substream private_data will be set to a pointer to the snd_soc_pcm_runtime, update the CODEC to CODEC links to respect this. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-14ASoC: Intel: Skylake: Acquire irq after RIRB allocationYong Zhi1-4/+6
Cold reboot stress test found that the hda irq could access rirb ring buffer before its memory gets allocated which resulting in null pointer dereference inside snd_hdac_bus_update_rirb(). Fix it by moving the skl_acquire_irq after ring buffer allocation. While here, also change err return from -EBUSY to actual error code. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-14ASoC: wm9712: fix replace codec to componentMarcel Ziswiler1-1/+1
Since commit 143b44845d87 ("ASoC: wm9712: replace codec to component") "wm9712-codec" got renamed to "wm9712-component", however, this change never got propagated down to the actual board/platform drivers. E.g. on Colibri T20 this lead to the following spew upon boot with sound/touch being broken: [ 2.214121] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 2.222137] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 2.344384] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 2.351885] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 2.668339] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 2.675811] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 3.208408] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 3.216312] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 3.235397] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 3.248938] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 14.970443] ALSA device list: [ 14.996628] No soundcards found. This commit finally fixes this again. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-08-14ASoC: Intel: bytcr_rt5640: Add quirks for 2 more devicesHans de Goede1-0/+26
Add quirks to select the right input-map, jack-detect pin, etc. for: Linx Linx7 tablet Onda V975w tablet Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-13Merge tag 'asoc-v4.19' of ↵Takashi Iwai222-2457/+12968
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.19 A fairly big update, including quite a bit of core activity this time around (which is good to see) along with a fairly large set of new drivers. - A new snd_pcm_stop_xrun() helper which is now used in several drivers. - Support for providing name prefixes to generic component nodes. - Quite a few fixes for DPCM as it gains a bit wider use and more robust testing. - Generalization of the DIO2125 support to a simple amplifier driver. - Accessory detection support for the audio graph card. - DT support for PXA AC'97 devices. - Quirks for a number of new x86 systems. - Support for AM Logic Meson, Everest ES7154, Intel systems with RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707.
2018-08-09ASoC: adav80x: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056531 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-09ASoC: da7219: Add delays to capture path to remove DC offset noiseAdam Thomson3-8/+49
On some platforms it has been noted that a pop noise can be witnessed when capturing audio, mainly for first time after a headset jack has been inserted. This is due to a DC offset in the Mic PGA and so to avoid this delays are required when powering up the capture path. This commit rectifies the problem by adding delays post Mic PGA and post Mixin PGA. The post Mic PGA delay is determined based on Mic Bias voltage, and is only applied the first time after a headset jack is inserted. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-08ASoC: wm_adsp: Make DSP name configurable by codec driverRichard Fitzgerald2-21/+50
Instead of harcoding that a core must always be called "DSPn" add a name member to struct wm_adsp so that the owning codec driver can provide a custom name. This allows for re-use of the wm_adsp driver with parts where the processing cores are named differently. If no name is provided the default DSPn name is used. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-08Merge branch 'asoc-4.18' into asoc-4.19 wmadsp depMark Brown11-19/+48
2018-08-08ASoC: wm_adsp: Declare firmware controls from codec driverRichard Fitzgerald6-33/+32
To allow for more flexibility in naming of DSP-type cores move the creation of the firmware controls to the codec drivers instead of having a hardcoded list in wm_adsp. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-08ASoC: max98373: Added software reset register to readable registersRyan Lee1-0/+1
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-08ASoC: wm_adsp: Correct DSP pointer for preloader controlAjit Pandey1-2/+6
The offset of the DSP core needs to be taken into account for the DSP preloader control get and put. Currently the dsp->preloaded variable will only ever be read/updated on the first DSP, whilst this doesn't affect the operation of the control the readback will be incorrect. Signed-off-by: Ajit Pandey <ajit.pandey@cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-08-08ASoC: rt5677: Fix initialization of rt5677_of_match.dataMatthias Kaehlcke1-1/+1
The driver expects to find the device id in rt5677_of_match.data, however it is currently assigned to rt5677_of_match.type. Fix this. The problem was found with the help of clang: sound/soc/codecs/rt5677.c:5010:36: warning: expression which evaluates to zero treated as a null pointer constant of type 'const void *' [-Wnon-literal-null-conversion] { .compatible = "realtek,rt5677", RT5677 }, ^~~~~~ Fixes: ddc9e69b9dc2 ("ASoC: rt5677: Hide platform data in the module sources") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-07ASoC: compress: make BE and FE order inline with dpcmSrinivas Kandagatla1-50/+46
For some reason order of startup/hw_params/prepare are reversed in dynamic compress usecase when compared to dpcm usecase. This is a issue with platforms like QCOM where it expects the BE to be initialized before FE. Interestingly the compress trigger callback order is inline with dpcm. Am not 100% sure why the compress audio case has been reversed. This patch is making the order inline with dpcm. If the reverse ordering is just co-incendental then this change makes sense and will avoid inventing some new mechanism to cope with ordering. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: AMD: Set delay value for the capture caseAkshu Agrawal1-1/+14
ACP->SYSMEM DMA happens at every I2S->SYSMEM period completion. Thus, there is delay of x frames till I2S->SYSMEM reaches a period length. This delay is communicated to user space. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: AMD: Modified DMA pointer for captureMukunda, Vijendar2-13/+19
Give position on ACP->SYSMEM DMA channel for the number of bytes that have been transferred on the basis of current descriptor under service. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: AMD: Make ACP->SYSMEM DMA non circularAkshu Agrawal1-5/+31
In capture case we don't want ACP to SYSMEM dma to be circular. This is because if an in place DSP filter is applied to captured output then circular DMA can overwrite the filter value with stale data. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: wm8994: Fix missing break in switchGustavo A. R. Silva1-1/+1
Add missing break statement in order to prevent the code from falling through to the default case. Addresses-Coverity-ID: 115050 ("Missing break in switch") Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-08-06ASoC: qdsp6: q6afe-dai: add SLIM tx AIF_IN dapmSrinivas Kandagatla1-0/+7
Add missing AIF_IN dapm for slim tx ports. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: qcom: remove unused header files from common.hSrinivas Kandagatla1-1/+0
This patch removes unused header files from common.h. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: sdm845: remove unused header filesSrinivas Kandagatla1-2/+0
This patch removes unused header files from the driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: apq8096: remove unused header filesSrinivas Kandagatla1-2/+0
This patch removes unused header files from the driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: qcom: make common.c as proper moduleSrinivas Kandagatla2-2/+9
This patch converts common helper functions in to proper module and also fixes below warning. WARNING: sound/soc/qcom/snd-soc-sdm845: 'qcom_snd_parse_of' exported twice. Previous export was in sound/soc/qcom/snd-soc-apq8096.ko Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: wm8903: use true and false for boolean valuesGustavo A. R. Silva1-2/+2
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: da9055: use true and false for boolean valuesGustavo A. R. Silva1-2/+2
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: wm5100-tables: use true and false for boolean valuesGustavo A. R. Silva1-6/+6
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: da7213: use true and false for boolean valuesGustavo A. R. Silva1-2/+2
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: twl6040: use true and false for boolean valuesGustavo A. R. Silva1-1/+1
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: da7219: use true and false for boolean valuesGustavo A. R. Silva1-2/+2
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: wm8996: use true and false for boolean valuesGustavo A. R. Silva1-4/+4
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: cs4270: use true and false for boolean valuesGustavo A. R. Silva1-1/+1
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: wm8990: use true and false for boolean valuesGustavo A. R. Silva1-2/+2
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-31 15:57:37 +0000