summaryrefslogtreecommitdiffstats
path: root/sound/soc/ux500
AgeCommit message (Collapse)AuthorFilesLines
2014-01-09ASoC: ux500: Don't set unused struct snd_pcm_hardware fieldsLars-Peter Clausen1-15/+0
The ASoC core assumes that the PCM component of the ASoC card transparently moves data around and does not impose any restrictions on the memory layout or the transfer speed. It ignores all fields from the snd_pcm_hardware struct for the PCM driver that are related to this. Setting these fields in the PCM driver might suggest otherwise though, so rather not set them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: ux500: Fix sparse non static symbol warningWei Yongjun1-3/+3
Fixes the following sparse warning: sound/soc/ux500/ux500_msp_i2s.c:649:5: warning: symbol 'ux500_msp_i2s_of_init_msp' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500: Dramatically reduce the size of the DAI driver data structLee Jones1-82/+14
We no longer have a means to differentiate between MSP devices at probe time, mainly because we don't really have to. So rather than have an over- sized static data structure in place, where the only difference between devices is the ID and name (which are unused), we'll just create one succinct, statically assigned and shared one instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Differentiate between pdata and DT initialisationLee Jones1-5/+15
If booting with full DT support (i.e. DMA too, the last piece of the puzzle), then we don't need to use the compatible_request_channel call back or require some of the historical bumph which probably isn't required by a platform data start-up now either. This will also be ripped out in upcoming commits. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Take out pointless dev_dbg() callLee Jones1-4/+0
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT caseLee Jones1-2/+40
In this patch we do two things. Firstly, instead of open coding the store of DMA data in to the DAI for later use, we use the API provided. Secondly we create and store similar DMA data for the DT case, only this time we use 'struct snd_dmaengine_dai_dma_data' which is provided by the core for this very reason. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Extend Device Tree support to deal with DMA dataLee Jones1-15/+41
Soon we will strip out pdata support from the Ux500 set of ASoC drivers. When this happens it will have to supply a DMA slave_config to the dmaengine. At the moment a great deal of this comes from pdata via AUXDATA. We need to become independent of this soon. This patch starts the process by allocating memory for the associated data structures and fetches the MSP id used for const struct indexing. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Expect different saved DMA data when obtaining from DAI storeLee Jones1-4/+15
In preparation for full Device Tree enablement we must differentiate between the two varying ways DMA data can be held in the DAI store. If we're booting with Device Tree the provided 'snd_dmaengine_dai_dma_data' data structure shall be used, whereas in order to avoid breaking legacy platform data we also need to be able to translate DMA data stored using the UX500 specific 'ux500_msp_dma_params' method. Once we move over to solely use Device Tree, we can enforce the use of 'snd_dmaengine_dai_dma_data' and this code can be removed altogether. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Stop pretending that we support varying address widthsLee Jones1-4/+3
The Slave Config's addr_width attribute is populated by data_width of dma_cfg, which in turn is derived from dma_params' data_size attribute and that comes from the slot_width which is always 16 bits (2 Bytes). We're cutting out the middle man here and just setting the DMA Slave Config directly. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: Ux500: Match platform by device node when booting Device TreeLee Jones1-0/+2
We're getting closer to fully enabling the Ux500 ASoC driver for Device Tree. When we switch over from using AUXDATA we'll need to match platform by only Device Tree nodes. In this patch we NULL out the platform_name, and supply nodes for each platform device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500: Provide better checking for Device Tree and/or Platform DataLee Jones1-2/+6
These drivers will not work without platform specific data, which is passed in via Device Tree or Platform Data. To avoid the chance of NULL pointer dereferencing and alike, let's ensure we have at least one of the methods in play before continuing. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ARM: ux500: Don't use enums for MSP IDs - for easy DT conversionLee Jones1-1/+1
Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15ASoC: mop500: add .owner to struct snd_soc_cardWei Yongjun1-0/+1
Add missing .owner of struct snd_soc_card. This prevents the module from being removed from underneath its users. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-03Merge tag 'sound-3.11' of ↵Linus Torvalds7-171/+100
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A relative calm release at this time with a flat diffstat. The only significant change in the ALSA core side is the support for more than 32 card instances, configurable via kconfig. Other than that, in both ASoC and other parts, mostly some improvements and fixes on the driver side. - hda: More quirks for ALC269-variants on Dell & co, VIA codec fixes - hda: Haswell HDMI audio fixes, runtime PM improvements - hda: Intel BayTrail support, ALC5505 DSP support - es1968: MediaForte M56VAP support - usb-audio: Improved support for Yamaha/Roland devices - usb-audio: M2Tech hiFace, Audio Advantage Micro II support - hdspm: wordclock fixes - ASoC: Pending fixes for WM8962 - ASoC: Cleanups and fixes for Blackfin, SGTL5000 and UX500 - ASoC: Generalisation of the Bluetooth and HDMI stub drivers - ASoC: SSM2518 and RT5640 codec drivers. - ASoC: Tegra CPUs with RT5640 machine driver - ASoC: AC'97 refactoring bug fixes - ASoC: ADAU1701 driver fixes - Clean up of *_set_drvdata() in a wide range of drivers" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (284 commits) ALSA: vmaster: Fix the regression of missing vmaster hook call ALSA: hda - Add Dell SSID to support Headset Mic recording ASoC: adau1701: remove control_data assignment ASoC: adau1701: more direct regmap usage ASoC: ac97: fixup multi-platform AC'97 module build failure ASoC: pxa2xx: fixup multi-platform AC'97 build failures ASoC: tegra20-ac97: Remove unused variable ASoC: tegra20-ac97: Remove duplicate error message ALSA: usb-audio: Add Audio Advantage Micro II ASoC: tas5086: fix Mid-Z implementation ASoC: tas5086: fix TAS5086_CLOCK_CONTROL register size ALSA: Replace the magic number 44 with const ALSA: hda - Fix the max length of control name in generic parser ALSA: hda - Guess what, it's two more Dell headset mic quirks ALSA: hda - Yet another Dell headset mic quirk ALSA: hda - Add support for ALC5505 DSP power-save mode ASoC: mfld: Remove unused variable ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE ALSA: usb-audio: claim autodetected PCM interfaces all at once ALSA: usb-audio: remove superfluous Roland quirks ...
2013-06-12ASoC: ux500: Add DMA slave config prepare routineFabio Baltieri1-0/+30
Implement a DMA slave config prepare routine, as until now the MSP driver depended on the DMA controller completing the channel configuration on its own, but this is not the case anymore since the recent DMA driver updates. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-12ASoC: ux500: Set DMA address during device initFabio Baltieri2-0/+4
Add a field with the tx/rx register address to the DMA parameters structure, and set it to the correct address during device initialization. This address used to be hardcoded in the DMA controller driver, it now needs to be explicitly figured out by the device driver. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-12ASoC: ux500: Move DMA parameters into ux500_mspFabio Baltieri4-20/+17
Move struct ux500_msp_dma_params declaration from ux500_msp_i2s_drvdata to ux500_msp, this saves some confusing pointer passing and allows to access all DMA configuration fields from ux500_msp_i2s. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-04dmaengine: ste_dma40: Convert data_width from register bit format to valueLee Jones1-5/+5
When a DMA client requests and configures a DMA channel, it requests data_width in Bytes. The DMA40 driver then swiftly converts it over to the necessary register bit value. Unfortunately, for any subsequent calculations we have to shift '1' by the bit pattern (1 << data_width) times to make any sense of it. This patch flips the semantics on its head and only converts the value to its respective register bit pattern when writing to registers. This way we can use the true data_width (in Bytes) value. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-28ASoC: ux500: Ensure consistent configuration between DAIsFabio Baltieri1-0/+35
Current implementation of mop500_ab8500 allows for inconsistent sample rate and channel count configuration between the playback and recording interfaces, through in the hardware the two MSP controllers share common clock and frame sync signals. This patch adds the necessary code to ensure that the two device are configure consistently. The check is added at machine driver level, as how to lock DAI configuration depend of the actual hardware implementation. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-25ASoC: ux500: Drop redundant msp id enumerationsFabio Baltieri1-8/+2
Ux500 has two equivalent enum for device id, one in platform_data and one in a local header. Fix this by dropping the local one. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-25ASoC: ux500: Add missing mop500_ab8500.h includeFabio Baltieri1-0/+1
Add a missing include that was resulting in some sparse warning for non-static structure without forward declaration. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-25ASoC: ux500: Drop unused code from msp headersFabio Baltieri2-33/+0
Drop unused fields and structures from ux500_msp_i2s header file, as those looks like leftover from a previous implementation of the driver. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-25ASoC: ux500: Drop dangling struct i2s_controllerFabio Baltieri2-31/+0
Drop struct i2s_controller from the ux500 ASoC driver as right now it is instantiated but not used anywhere. Also drop a mismatched device_unregister in the process. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-25ASoC: ux500: Drop pinctrl sleep supportFabio Baltieri2-60/+2
Drop pinctrl default/sleep state switching code, as it was breaking the capture interface by putting the I2S pins in hi-z mode regardless of its usage status, and not giving any real benefit. Pinctrl default mode configuration is already managed automatically by a specific pinctrl hog. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: mop500: Staticize non exported structLars-Peter Clausen1-1/+1
The mop500_dai_links struct is not used outside of mop500.c, so make it static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: mop500_ab8500: Staticize non exported functionsLars-Peter Clausen1-3/+3
The mop500_ab8500_startup(), the mop500_ab8500_shutdown() and the mop500_ab8500_hw_params() function are not used outside of mop500_ab8500, so make them static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: ux500: drop clock gating widgets from machine driverFabio Baltieri1-10/+0
Drop ab8500 clock gating widgets from mop500_ab8500_ctrls, as these bits are already controlled by ab8500 codec driver and should not be exposed to the user. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: ux500: register controls to card instead of codecFabio Baltieri1-5/+5
Update mop500_ab8500_machine_init to register mop500_ab8500_ctrls as card control instead of codec control, as it only contains SOC_DAPM_PIN_SWITCH definitions. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-03Merge tag 'sound-3.10' of ↵Linus Torvalds6-223/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Mostly many small changes spread as seen in diffstat in sound/* directory by this update. A significant change in the subsystem level is the introduction of snd_soc_component, which will help more generic handling of SoC and off-SoC components. Also, snd_BUG_ON() macro is enabled unconditionally now due to its misuses, so people might hit kernel warnings (it's a good thing for us). - compress-offload: support for capture by Charles Keepax - HD-audio: codec delay support by Dylan Reid - HD-audio: improvements/fixes in generic parser: better headphone mic and headset mic support, jack_modes hint consolidation, proper beep attach/detachment, generalized power filter controls by David Henningsson, et al - HD-audio: Improved management of HDMI codec pins/converters - HD-audio: Better pin/DAC assignment for VIA codecs - HD-audio: Haswell HDMI workarounds - HD-audio: ALC268 codec support, a few new quirks for Chromebooks - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency fix by Clemens Ladisch - USB: support for DSD formats by Daniel Mack - USB: A few UAC2 device endian/cock fixes by Eldad Zack - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller, Yamaha THRxx devices - HDSPM: updates for TCO controls by Adrian Knoth - ASoC: Add a snd_soc_component object type for generic handling of SoC and off-SoC components by Kuninori Morimoto, - dmaengine: a large set of cleanups and conversions by Lars-Peter Clausen - ASoC DAPM: performance optimizations from Ryo Tsutsui - ASoC DAPM: support for mixer control sharing by Stephen Warren - ASoC: multiplatform ARM cleanups from Arnd Bergmann - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack" * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (315 commits) ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch ALSA: asihpi: add format support check in snd_card_asihpi_capture_formats ALSA: pcm_format_to_bits strong-typed conversion ALSA: compress: fix the states to check for allowing read ALSA: hda - Move Thinkpad X220 to use auto parser ALSA: USB: adjust for changed 3.8 USB API ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources sound: oss/dmabuf: use dma_map_single ALSA: ali5451: use mdelay instead of large udelay constants ALSA: hda - Add the support for ALC286 codec ALSA: usb-audio: USB quirk for Yamaha THR10C ALSA: usb-audio: USB quirk for Yamaha THR5A ALSA: usb-audio: USB quirk for Yamaha THR10 ALSA: usb-audio: Fix autopm error during probing ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT ALSA: sound kconfig typo ALSA: emu10k1: Fix dock firmware loading ASoC: ux500: forward declare msp_i2s_platform_data ASoC: davinci-mcasp: Add Support BCLK-to-LRCLK ratio for TDM modes ASoC: davinci-pcm, davinci-mcasp: Clean up active_serializers ...
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds4-10/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
2013-04-23Merge remote-tracking branch 'asoc/topic/ux500' into asoc-nextMark Brown1-0/+1
2013-04-23Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown2-143/+18
2013-04-23ASoC: ux500: forward declare msp_i2s_platform_dataArnd Bergmann1-0/+1
We get a lot of build warnings from the msp driver like: In file included from sound/soc/ux500/ux500_msp_dai.h:21:0, from sound/soc/ux500/mop500.c:25: sound/soc/ux500/ux500_msp_i2s.h:546:11: warning: 'struct msp_i2s_platform_data' declared inside parameter list [enabled by default] struct msp_i2s_platform_data *platform_data); ^ sound/soc/ux500/ux500_msp_i2s.h:546:11: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] The easiest solution is to add a declaration of the struct name. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-18ASoC: ux500: Use generic dmaengine PCMLars-Peter Clausen2-143/+18
Use the generic dmaengine PCM driver instead of a custom implemention. There is a minor functional change, the ux500 PCM driver did not preallocate the audio buffer, while the generic dmaengine PCM driver will do this. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-17ASoC: dmaengine-pcm: Make requesting the DMA channel at PCM open optionalLars-Peter Clausen1-3/+3
Refactor the dmaengine PCM library to allow the DMA channel to be requested before opening a PCM substream. snd_dmaengine_pcm_open() now expects a DMA channel instead of a filter function and filter parameter as its parameters. snd_dmaengine_pcm_close() is updated to not release the DMA channel. This allows a dmaengine based PCM driver to request its channels before the substream is opened. The patch also introduces two new functions, snd_dmaengine_pcm_open_request_chan() and snd_dmaengine_pcm_close_release_chan(), which have the same signature and behaviour of the old snd_dmaengine_pcm_{open,close}() and internally use the new variants of these functions. All users of snd_dmaengine_pcm_{open,close}() are updated to use snd_dmaengine_pcm_open_request_chan() and snd_dmaengine_pcm_close_release_chan(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-12Merge remote-tracking branch 'asoc/topic/ux500' into asoc-nextMark Brown1-5/+0
2013-04-12Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown2-74/+16
2013-04-08ASoC: Ux500: remove test for undefined Kconfig macroPaul Bolle1-5/+0
A test for CONFIG_SND_SOC_UX500_AB5500 was added in v3.5. But there never was a corresponding Kconfig symbol so this test has always evaluated to true. And since AB5500 support was removed in v3.5 it appears safe to remove this test and a few lines of code. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>Linus Walleij3-6/+0
This removes <mach/hardware.h> and <mach/db8500-regs.h> from the Ux500, merging them into the local include "db8500-regs.h" in mach-ux500. There is some impact outside the ux500 machine, but most of it is dealt with in earlier patches. Contains portions of a clean-up patch from Arnd Bergmann. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08ARM: ux500: move mach/msp.h to <linux/platform_data/*>Arnd Bergmann3-4/+2
This header file only contains platform data structure definitions, so it's straightforward to move. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [Delete one include rather than move it] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-07ASoC: ux500_pcm: Use the same snd_pcm_hardware for playback and captureLars-Peter Clausen2-50/+15
The snd_pcm_hardware structs for playback and capture in the ux500 PCM are identical, so remove one of them and use the same snd_pcm_hardware struct for both playback and capture. Also move the defines used to initialize the snd_pcm_hardware fields from ux500_pcm.h to ux500_pcm.c since that's the only place where they are used. Also drop the assignment of the snd_pcm_hardware struct to runtime->hw since that is what the call to snd_soc_set_runtime_hwparams() right above it already does, so the second assignment is redundant. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-27sound: Remove stray pluses from Kconfig filePaul Bolle1-2/+2
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-26ASoC: switch over to use snd_soc_register_component() on ux500 mspKuninori Morimoto1-4/+9
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: ux500_pcm: No need to use snd_dmaengine_pcm_set_data()Lars-Peter Clausen1-2/+0
The driver never uses snd_dmaengine_pcm_get_data(), so there is no need to use snd_dmaengine_pcm_set_data(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: ux500_pcm: No need to wrap snd_dmaengine_pcm_close()Lars-Peter Clausen1-13/+1
If a PCM driver using the dmaengine PCM helper functions doesn't need to do anything special in its pcm_close callback, snd_dmaengine_pcm_close can be used directly for as the pcm_close callback and there is no need to wrap it in a custom function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: ux500_pcm: Remove duplicated SNDRV_PCM_HW_PARAM_PERIODS constraintLars-Peter Clausen1-9/+0
The generic dmaengine based PCM driver code takes care of setting this constraint, there is no need of doing it manually in the ux500 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-31ASoC: Ux500: Fix build error pertaining to missing include fileLee Jones1-1/+1
Some compilers complain when building sound for MOP500: sound/soc/ux500/mop500.c:27:27: fatal error: mop500_ab8500.h: No such file or directory That file is actually in the local directory rather than include. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-13Merge tag 'sound-3.8' of ↵Linus Torvalds5-31/+65
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This update contains a fairly wide range of changes all over in sound subdirectory, mainly because of UAPI header moves by David and __dev* annotation removals by Bill. Other highlights are: - Introduced the support for wallclock timestamps in ALSA PCM core - Add the poll loop implementation for HD-audio jack detection - Yet more VGA-switcheroo fixes for HD-audio - New VIA HD-audio codec support - More fixes on resource management in USB audio and MIDI drivers - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite, Roland VG-99, etc - Add support for FastTrack C400 usb-audio - Clean ups in many drivers regarding firmware loading - Add PSC724 Ultiimate Edge support to ice1712 - A few hdspm driver updates - New Stanton SCS.1d/1m FireWire driver - Standardisation of the logging in ASoC codes - DT and dmaengine support for ASoC Atmel - Support for Wolfson ADSP cores - New drivers for Freescale/iVeia P1022 and Maxim MAX98090 - Lots of other ASoC driver fixes and developments" Fix up trivial conflicts. And go out on a limb and assume the dts file 'status' field of one of the conflicting things was supposed to be "disabled", not "disable" like in pretty much all other cases. * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits) ALSA: hda - Move runtime PM check to runtime_idle callback ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522 ALSA: hda - Avoid doubly suspend after vga switcheroo ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3 ALSA: hda - Check validity of CORB/RIRB WP reads ALSA: hda - use usleep_range in link reset and change timeout check ALSA: HDA: VIA: Add support for codec VT1808. ALSA: HDA: VIA Add support for codec VT1705CF. ASoC: codecs: remove __dev* attributes ASoC: utils: remove __dev* attributes ASoC: ux500: remove __dev* attributes ASoC: txx9: remove __dev* attributes ASoC: tegra: remove __dev* attributes ASoC: spear: remove __dev* attributes ASoC: sh: remove __dev* attributes ASoC: s6000: remove __dev* attributes ASoC: OMAP: remove __dev* attributes ASoC: nuc900: remove __dev* attributes ASoC: mxs: remove __dev* attributes ASoC: kirkwood: remove __dev* attributes ...
2012-12-10ASoC: ux500: remove __dev* attributesBill Pemberton3-9/+9
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27Merge tag 'v3.7-rc7' into asoc-ux500Mark Brown2-5/+20
Linux 3.7-rc7
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 17:46:36 +0000