summaryrefslogtreecommitdiffstats
path: root/sound/soc/tegra
AgeCommit message (Collapse)AuthorFilesLines
2011-08-09ASoC: Tegra: wm8903 machine driver: Allow re-insertion of moduleStephen Warren1-4/+11
Two issues were preventing module snd-soc-tegra-wm8903.ko from being removed and re-inserted: a) The speaker-enable GPIO is hosted by the WM8903 chip. This GPIO must be freed before snd_soc_unregister_card() is called, because that triggers wm8903.c:wm8903_remove(), which calls gpiochip_remove(), which then fails if any of the GPIOs are in use. To solve this, free all GPIOs first, so the code doesn't care where they come from. b) We need to call snd_soc_jack_free_gpios() to match the call to snd_soc_jack_add_gpios() during initialization. Without this, the call to snd_soc_jack_add_gpios() fails during any subsequent modprobe and initialization, since the GPIO and IRQ are already registered. In turn, this causes the headphone state not to be monitored, so the headphone is assumed not to be plugged in, and the audio path to it is never enabled. Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: stable@kernel.org Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-09ASoC: Tegra: tegra_pcm_deallocate_dma_buffer: Don't OOPSStephen Warren1-2/+7
Not all PCM devices have all sub-streams. Specifically, the SPDIF driver only supports playback and hence has no capture substream. Check whether a substream exists before dereferencing it, when de-allocating DMA buffers in tegra_pcm_deallocate_dma_buffer. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-05ASoC: Tegra: Implement SPDIF CPU DAIStephen Warren4-0/+855
This is a minimal driver for the Tegra SPDIF controller. In hardware, the SPDIF output signal is always routed to any active HDMI display controllers, and may also be routed to external pins on Tegra using the pinmux. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04Merge branch 'for-3.0' into for-3.1Mark Brown1-0/+6
2011-07-04ASoC: Tegra: I2S: s/clk_get_sys/clk_get/Stephen Warren1-3/+1
The clock needed by the I2S driver is associated with the I2S device name in the standard fashion. Hence, use clk_get(dev) instead of clk_get_sys(clk_name). Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: Tegra: I2S: Ensure clock is enabled when writing regsStephen Warren1-0/+6
The I2S controller needs a clock to respond to register writes. Without this, register writes will at worst hang the CPU. In practice, I've only observed writes being dropped. Luckily, the dropped register writes historically had no effect: TEGRA_I2S_TIMING: The value we wrote was the reset default. TEGRA_I2S_FIFO_SCR: The default was for the FIFOs to request more data when one slot was empty. The requested value was for the FIFOs to request when four slots were empty. The DMA controller in the mainline kernel is configured to burst a single entry at a time into the FIFO, hence there was no issue. The only negative effect was on bus efficiency losses due to an increased number of arbitration attempts. However, in various non-upstream changes, the DMA controller now bursts four entries at a time into the FIFO. If there is only space for one entry, the data is simply dropped. In practice, this resulted in 3/4 of samples being dropped, and playback at 4x the expected rate and pitch. By fixing the clocking issue, this is solved. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07ASoC: core - Optimise and refactor pcm_new() to pass only rtdLiam Girdwood1-2/+4
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI. Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains card, pcm and DAI along with other members too that are useful too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-30Merge branch 'for-2.6.40' into for-2.6.41Mark Brown1-1/+1
2011-05-27ASoC: Tegra: Enable Kaen HP_MUTE at bootStephen Warren1-1/+1
We want the default state of the HP_MUTE signal to be asserted, so that the headphones are muted before the first audio playback. Without this, the headphones are left unmuted until shortly after the first audio playback completes. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-20ASoC: Tegra: Fix compile when debugfs not enabledStephen Warren1-1/+1
The prototype of the inline dummy version of tegra_i2s_debug_add was not consistent with the real version. Reported-by: Rhyland-Klein <rklein@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03ASoC: tegra: TrimSlice machine supportMike Rapoport3-0/+238
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26ASoC: Remove default settings from Tegra KconfigMark Brown1-3/+0
There needs to be a strong reason for overriding the Kconfig default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-21Merge branch 'tegra' into for-2.6.40Mark Brown1-1/+8
Fix up merge with Harmony driver rename. Conflicts: sound/soc/tegra/Kconfig
2011-04-21ARM: Tegra: select MACH_HAS_SND_SOC_TEGRA_WM8903Stephen Warren1-0/+7
CONFIG_SND_SOC_TEGRA_WM8903 is useful for many Tegra boards. To avoid the ASoC tegra/Kconfig enumerating them all, instead have the Tegra machine Kconfig select MACH_HAS_SND_SOC_TEGRA_WM8903 where appropriate, and have SND_SOC_TEGRA_WM8903 depend on this. [Redid ASoC diff so it applies. -- broonie] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-20ASoC: Tegra: wm8903: s/code/data/ for control/widget/mapsStephen Warren1-22/+19
Replace calls to a variety of registration functions by updating struct snd_soc_card snd_soc_tegra_wm8903 to directly point at the various control/widget/map tables instead. The ASoC core now performs any required registration based on these data fields. (Applying Mark's TrimSlice review comments to the existing driver) Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-20ASoC: Tegra: Retrieve card from DAPM context not codecStephen Warren1-4/+4
Card widgets are created in the card's DAPM context, not any codec's DAPM context. Hence, w->codec==NULL. Instead, find the card from the widget through the DAPM context of the widget, not the codec of the widget. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-20ASoC: Tegra: Don't return mclk_changed from utils_set_rateStephen Warren3-15/+13
Only the clock programming code needs to know whether the clocks changed, and that is encapsulated within tegra_asoc_utils_set_rate(). The machine driver's call to snd_soc_dai_set_sysclk(codec_dai, ...) is safe irrespective of whether the clocks changed. (Applying Mark's TrimSlice review comments to the existing driver) Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-20ASoC: Tegra: wm8903: Remove redundant drvdata clearsStephen Warren1-9/+2
When the driver is not initialized/registered, nothing should be touching these fields anyway, so there's no point clearing them out. (Applying Mark's TrimSlice review comments to the existing driver) Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-20ASoC: Tegra: wm8903 probe: Don't call machine_is_*()Stephen Warren1-7/+0
This machine driver is a platform driver, and hence will only be instantiated on the correct machines. Hence, there is no need to check the current machine during probe. (Applying Mark's TrimSlice review comments to the existing driver) Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18ASoC: Tegra: Support more boardsStephen Warren2-42/+145
* Ventana is identical to Harmony. * Seaboard, Kaen, and Aebl are all pretty similar, mainly with slightly different sets of GPIOs, and slightly different WM8903 pin connectivity. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18ASoC: Tegra: Don't store snd_soc_jack_gpio in an arrayStephen Warren1-10/+8
Storing the struct in an array makes the assignments to the GPIO member a little non-obvious, and is pointless when there's only a single GPIO. (I thought I fixed this during the review cycle when first submitting this driver, but I guess I overlooked that) Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18ASoC: Tegra: Rename Kconfig SND_TEGRA_SOC_* to SND_SOC_TEGRA_*Stephen Warren2-11/+11
The previous commit renames SND_TEGRA_SOC_HARMONY to SND_TEGRA_SOC_WM8903. While we're breaking people's .config files, rename all Tegra/SOC-related Kconfig variables to be more consistent with at least the core codec variables. Note that there exist machines that name their variables both ways. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18ASoC: Tegra: Rename harmony.c to tegra_wm8903.cStephen Warren3-84/+86
Soon, this machine driver will be updated to handle a number of Tegra boards using the WM8903 codec. Rename the file in advance to reflect this. Fix the content of tegra_wm8903.c to match the rename; replace references to Harmony board with something more generic. * s/struct tegra_harmony/struct tegra_wm8903/ * s/harmony/machine/ # variable name * Similar rename for some functions * Similar comment fix * Similar MODULE_DESCRIPTION fix Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18Merge branch 'tegra' into for-2.6.40Mark Brown1-7/+7
2011-04-18ASoC: Tegra: Rename pdev tegra-snd-harmony to tegra-snd-wm8903Stephen Warren1-1/+1
Soon, this machine driver will be updated to handle a number of Tegra boards using the WM8903 codec. Rename the platform device in advance to reflect this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18ARM: Tegra: Rename harmony_audio.h -> tegra_wm8903_pdata.hStephen Warren1-6/+6
The audio driver will soon support more than just the Tegra Harmony board. Rename the platform data header file and data type to reflect this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-06ASoC: Tegra: Suspend/resume supportStephen Warren1-0/+1
ASoC machine drivers that are their own platform_driver (as opposed to those using the soc-audio platform_driver) need to explicitly set up power-management operation callbacks. To avoid cut/paste, snd_soc_pm_ops also needs to be exported. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-28ASoC: Tegra: Fix error handling in DMA channel allocStephen Warren1-2/+2
tegra_dma_allocate_channel() returns NULL on errors, not an error pointer. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-25ASoC: Tegra: Move utilities to separate moduleStephen Warren2-1/+8
The utilities will be required by every machine driver. Including the utility object directly into every machine driver causes a build failure if the modules are actually built into the kernel, since each will define the symbols exported by the utility file. Solve this by moving the utility object into a separate module. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Tegra: Add MODULE_ALIASStephen Warren4-1/+7
With the appropriate MODULE_ALIAS in place, the audio modules will be automatically loaded; there is no longer a need for manual modprobes. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Tegra: Harmony: Explicitly set mic enablesStephen Warren1-3/+31
Harmony has both an external mic (a regular mic jack) and an internal mic (a 0.1" two-pin header on the board). The external mic is connected to the WM8903's IN1L pin, and is supported by the current driver. The internal mic is connected to the WM8903's IN1R pin, and is not supported by the current driver. It appears that no Harmony systems were shipped with any internal mic connected; users were expected to provide their own. This makes the internal mic connection less interesting. The WM8903's Mic Bias signal is used for both of these mics. For each mic, a GPIO drives a transistor which gates whether the mic bias signal is actively connected to that mic, or isolated from it. The dual use of the mic bias for both mics makes a general-purpose complete implementation of mic detection using the mic bias complex. So, for simplicity, the internal mic is currently ignored by the driver. This patch configures the relevant GPIOs to enable the mic bias connection to the external mic, and disable the mic bias connection to the internal mic. Note that in practice, this is the default state if these GPIOs aren't configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Harmony: Call snd_soc_dapm_nc_pinStephen Warren1-0/+5
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-13ASoC: Tegra: Harmony: Implement mic detectionStephen Warren1-3/+22
* Add jack definition for mic jack * Request wm8903 to enable mic detection * Force mic bias on, since it's required for mic detection Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: Remove redundant -codec from WM8903 driver nameMark Brown1-1/+1
It causes noisy -codecs to appear in things like .codec_name. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-09ASoC: Tegra: Harmony: Add switch control for speakerStephen Warren1-1/+9
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-09ASoC: Tegra: Harmony: Add headphone jack detectionStephen Warren1-1/+29
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-01ASoC: Tegra: Harmony: Remove redundant !!Stephen Warren1-1/+1
gpio_set_value* should accept logic values not just 0 or 1. The WM8903 GPIO driver has been fixed to work this way, so remove the redundant !! previously required when it didn't accept values >1. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: I2S: Use dev_err not pr_errStephen Warren1-1/+1
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: utils: Don't use global variablesStephen Warren3-54/+68
Instead, have the machine driver provide storage for the utility data somehow. For Harmony in particular, store this within struct tegra_harmony, itself referenced by snd_soc_card's drvdata. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: Harmony: Use dev_err not pr_errStephen Warren1-5/+6
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: Harmony: Fix indentation issue.Stephen Warren1-5/+6
Indent with TABs not spaces. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: Harmony: Support the internal speakerStephen Warren1-0/+51
Add DAPM widget definitions for the internal speaker paths. Currently, this path is always enabled while playback is active. Add code to control the speaker amplifier GPIO. The GPIO is requested during _init, since that's the first time it is guaranteed that the WM8903 module is loaded, probed, and hence has exported its GPIO chip. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-31ASoC: Tegra: Harmony: Don't use soc-audio platform deviceStephen Warren1-28/+66
Previously, snd-soc-tegra-harmony internally instantiated a platform device object whenever the module was loaded. Instead, switch to a more typical model where arch/arm/mach-tegra defines a platform device, and snd-soc-tegra-harmony acts as a driver for such a platform device. Define a new struct tegra_harmony to store driver data in the future. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-14ASoC: tegra: Add DAPM widgets/routes for HarmonyStephen Warren1-0/+31
With this change, I can capture from a microphone plugged into the mic jack on Harmony (after unmuting Left Input PGA, and maybe turning up the gain there too). Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-14ASoC: tegra: Remove TEGRA_I2S_AUDIO from KconfigStephen Warren1-1/+0
That config variable doesn't exist in the mainline kernel, and hence the dependency shouldn't either. In linux-tegra-2.6.36, the dependency did exist to avoid a conflict with the old non-ALSA Tegra I2S driver. However, this isn't and won't be upstreamed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-13ASoC: tegra: s/IS_ERR_OR_NULL/IS_ERR/ for clk_get_sysStephen Warren2-12/+10
A recent discussion on linux-arm-kernel noted that the value returned by clk_get_sys is an opaque token, and not strictly a pointer; it is meaningful only to the clock API, clients should not dereference the value, and the clock API must accept any non-IS_ERR value it returned. Hence, only IS_ERR is appropriate to interpret the result, not IS_ERR_OR_NULL. I checked that clk_get_sys in both ASoC's for-next and Tegra's for-next do behave as described; NULL is not returned in the case of error. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: Update name of debugfs root symbol to snd_soc_Mark Brown2-3/+4
Everything else is using snd_soc_ so we should use it here too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-10ASoC: tegra: Kconfig and MakefileStephen Warren2-0/+41
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: tegra: Harmony machine supportStephen Warren1-0/+179
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: tegra: Machine utility codeStephen Warren2-0/+185
Many portions of Tegra ASoC machine drivers will be similar or identical. To avoid cut/paste, this file will act as a repository for all that common code. For now, it solely includes code to reprogram the audio PLL for 44.1KHz- vs. 48KHz-based sample rates. Signed-Off-By: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 19:29:40 +0000