summaryrefslogtreecommitdiffstats
path: root/sound/soc/sunxi
AgeCommit message (Collapse)AuthorFilesLines
2019-02-19ASoC: sunxi: sun50i-codec-analog: Rename hpvcc regulator supply to cpvddChen-Yu Tsai1-2/+2
The A64 datasheet lists the supply rail for the headphone amp's charge pump as "CPVDD". cpvdd-supply is the name of the property for this power rail specified in the device tree bindings. "HPVCC" was the name used in the A33 datasheet for the same function. Rename the supply so it matches the datasheet, bindings, and the subject from the original commit. Fixes: ca0412a05756 ("ASoC: sunxi: sun50i-codec-analog: Add support for cpvdd regulator supply") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-07ASoC: sun4i-codec: Add Line Playback Volume, Line Boost Volume, Line Right, ↵Danny Milosavljevic1-0/+27
Line Left, Line Playback Switch Add Line Playback Volume for Allwinner A10 and Allwinner A20. Add Line Boost Volume for Allwinner A10 and Allwinner A20. Add Line Right, Line Left, Line Playback Switch for Allwinner A10 and Allwinner A20. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-07ASoC: sun4i-codec: Add FM Playback Volume, FM Left, FM Right, FM Playback SwitchDanny Milosavljevic1-0/+18
Add FM Playback Volume for Allwinner A10 and Allwinner A20. Add FM Left, FM Right, FM Playback Switch for Allwinner A10 and Allwinner A20. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-07ASoC: sun4i-codec: Add Mic1 Playback Switch, Mic2 Playback SwitchDanny Milosavljevic1-0/+14
Add Mic1 Playback Switch and Mic2 Playback Switch for Allwinner A10 and Allwinner A20. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-07ASoC: sun4i-codec: Merge sun4i_codec_left_mixer_controls and ↵Danny Milosavljevic1-16/+16
sun4i_codec_right_mixer_controls into sun4i_codec_mixer_controls Since it's now possible to have a DAPM mixer control with multiple channels, use it to cut down the total number of controls. Keep "Left Mixer Left DAC Playback Switch" and "Right Mixer Right DAC Playback Switch" name & layout the same as before for compatibility. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-07ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost VolumeDanny Milosavljevic1-0/+23
Add Mic1 Boost Volume and Mic2 Boost Volume for Allwinner A10 and for Allwinner A20. Those controls are in different registers per chip model, so put the Allwinner A10 controls and the Allwinner A20 controls into the newly split sun4i_codec_controls and sun7i_codec_controls, respectively. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-07ASoC: sun4i-codec: Add sun7i_codec_controls, sun7i_codec_codecDanny Milosavljevic1-1/+23
Introduce sun7i_codec_controls because some of the controls are different on Allwinner A20 compared to Allwinner A10. Also introduce sun7i_codec_codec in order to use sun7i_codec_controls and make sun7i_codec_quirks use sun7i_codec_codec. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-07ASoC: sun4i-codec: Add Mic Playback VolumeDanny Milosavljevic1-0/+3
Add a control "Mic Playback Volume" that allows the user to control the MIC gain stage (common for Mic1 and Mic2) leading to the output mixer. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-07ASoC: sun4i-codec: Add MIC2 Pre-Amplifier, Mic2 inputDanny Milosavljevic1-0/+12
Add MIC2 Pre-Amplifier, Mic2 input for Allwinner A10 and Allwinner A20. Previously, there only the Mic1 input and MIC1 Pre-Amplifier was exposed. This exposes the Mic2 input and MIC2 Pre-Amplifier. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13Merge branch 'for-4.20' of ↵Mark Brown2-8/+6
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-4.21 intel dep
2018-11-23ASoC: sunxi: sun50i-codec-analog: Add support for cpvdd regulator supplyChen-Yu Tsai1-0/+2
On the Allwinner A64 SoCs, the audio codec has a built-in headphone amplifier. This amplifier has a power supply separate from the rest of the analog audio circuitry, labeled cpvdd. This patch adds a DAPM widget for this supply, and ties it to the headphone amp widget. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-13ASoC: sun8i-codec: add missing route for ADCVasily Khoruzhick1-1/+5
sun8i-codec misses a route from ADC to AIF1 Slot 0 ADC. Add it to the driver to avoid adding it to every dts. Fixes: eda85d1fee05d ("ASoC: sun8i-codec: Add ADC support for a33") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-09ASoC: sun8i-codec: fix crash on module removalVasily Khoruzhick1-6/+0
drvdata is actually sun8i_codec, not snd_soc_card, so it crashes when calling snd_soc_card_get_drvdata(). Drop card and scodec vars anyway since we don't need to disable/unprepare clocks - it's already done by calling runtime_suspend() Drop clk_disable_unprepare() calls for the same reason. Fixes: 36c684936fae7 ("ASoC: Add sun8i digital audio codec") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-05ASoC: sunxi: rename SND_SUNXI_ADDA_PR_REGMAP to SND_SUN8I_ADDA_PR_REGMAPVasily Khoruzhick1-1/+1
SND_SUN50I_CODEC_ANALOG selects SND_SUNXI_ADDA_PR_REGMAP which is leftover of renaming SND_SUNXI_ADDA_PR_REGMAP to SND_SUN8I_ADDA_PR_REGMAP. Replace it with SND_SUN8I_ADDA_PR_REGMAP to fix possible link errors for some configurations: sound/soc/sunxi/sun50i-codec-analog.o: In function `sun50i_codec_analog_probe': sun50i-codec-analog.c:(.text+0x62): undefined reference to `sun8i_adda_pr_regmap_init' Fixes: 42371f327df0 ("ASoC: sunxi: Add new driver for Allwinner A64 codec's analog path controls") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-21ASoC: sun4i-i2s: move code from startup/shutdown hooks into pm_runtime hooksVasily Khoruzhick1-36/+25
startup() and shutdown() hooks are called for both substreams, so stopping either substream when another is running breaks the latter. E.g. playback breaks if capture is stopped when playback is running. Move code from startup() and shutdown() to resume() and suspend() hooks respectively to fix this issue Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-17ASoC: sunxi: allow the sun8i-codec driver to be built on ARM64Vasily Khoruzhick1-1/+1
Allwinner A64 uses the same digital codec part as in A33, so we need to build this driver on ARM64 as well. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-17ASoC: sunxi: Add new driver for Allwinner A64 codec's analog path controlsVasily Khoruzhick3-0/+453
The internal codec on A64 is split into 2 parts. The analog path controls are routed through an embedded custom register bus accessed through the PRCM block. Add an ASoC component driver for it. This should be tied to the codec audio card as an auxiliary device. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-17ASoC: sun8i-codec-analog: split regmap code into separate driverVasily Khoruzhick5-77/+119
It will be reused by sun50i-codec-analog later. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-17ASoC: sun8i-codec: Don't hardcode BCLK / LRCK ratioVasily Khoruzhick1-3/+19
BCLK / LRCK ratio should be sample size * channels, but it was hardcoded to 32 (0x1 is 32 as per A33 and A64 datasheets). Calculate it basing on sample size and number of channels. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-17ASoC: sun4i-i2s: Add compatibility with A64 codec I2SMarcus Cooper1-0/+21
The I2S block used for the audio codec in the A64 differs from other 3 I2S modules in A64 and isn't compatible with H3. But it is very similar to what is found in A10(sun4i). However, its TX FIFO is located at a different address. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-28Merge remote-tracking branches 'asoc/topic/sta529', 'asoc/topic/sti-sas', ↵Mark Brown2-45/+49
'asoc/topic/stm32', 'asoc/topic/sun4i' and 'asoc/topic/sun8i' into asoc-next
2018-02-26ASoC: sun4i-i2s: Fix RX slot number of SUN8IYong Deng1-1/+1
I2S's RX slot number of SUN8I should be shifted 4 bit to left. Fixes: 7d2993811a1e ("ASoC: sun4i-i2s: Add support for H3") Signed-off-by: Yong Deng <yong.deng@magewell.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-02-12ASoC: sun8i: replace codec to componentKuninori Morimoto1-11/+12
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: sun4i: replace codec to componentKuninori Morimoto1-34/+37
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-07Merge remote-tracking branches 'asoc/topic/sam9x5_wm8731', ↵Mark Brown1-2/+80
'asoc/topic/sgtl5000' and 'asoc/topic/sun8i-codec' into asoc-next
2018-01-24ASoC: sun8i-codec: Add ADC support for a33Mylene JOSSERAND1-2/+80
Add ADC support for the sun8i-codec driver. This driver uses microphones widgets and routes provided by the analog part (sun8i-codec-analog). Some digital configurations are needed by creating new ADC widgets and routes. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12Merge remote-tracking branches 'asoc/topic/sunxi', 'asoc/topic/symmetry', ↵Mark Brown2-9/+41
'asoc/topic/tas5720', 'asoc/topic/tas6424' and 'asoc/topic/tfa9879' into asoc-next
2017-12-14ASoC: sun4i-i2s: Show detailed error when DAI configuration callbacks failChen-Yu Tsai1-6/+30
When any of the DAI hardware configuration callbacks (.hw_param, .set_fmt, .set_sysclk) fails, there is no explanation about why it failed. This is particularly confusing for .hw_param, which covers many parameters of the DAI. Telling the users what parameter isn't supported, and what the requested value was goes a long way for developers trying to combine sun4i-i2s with external codecs. This patch adds dev_err calls explaining what isn't supported or failed, and what the value was. sun4i_i2s_set_clk_rate()'s first parameter was changed to a struct snd_soc_dai *dai, so we can get the underlying device. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-12ASoC: sun4i-codec: enable 12Khz and 24Khz audio sample ratesAndrea Bondavalli1-9/+20
H3 ASoC supports 12Khz and 24Khz audio sample rates but the current drivers doesn't advertise these rates properly and they cannot be used. For example attempt to capture at 12Khz uses 11Khz (same applies to audio playback): Recording raw data '/tmp/testS16_LE.raw' : Signed 16 bit Little Endian, Rate 12000 Hz, Stereo Warning: rate is not accurate (requested = 12000Hz, got = 11025Hz) This patch fixes the audio sample rates declared and supported by the driver according to the H3 data sheet. Specifically for audio playback: 8000, 11050, 12000, 16000, 22050, 24000, 32000, 44100, 48000, 96000, 192000 and for audio capture: 8000, 11050, 12000, 16000, 22050, 24000, 32000, 44100, 48000 Signed-off-by: Andrea Bondavalli <andrea.bondavalli74@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-12ASoC: sun4i-i2s: Add support for A83TChen-Yu Tsai1-0/+21
The I2S controller in the A83T is mostly compatible with the one found in earlier SoCs such as the A20 and A31. While the documents publicly available for the A83T do not cover this hardware, the officially released BSP kernel does have register definitions for it. These were matched against the A20 user manual. The only difference is the TX FIFO and interrupt status registers have been swapped around, like what we have seen with the SPDIF controller. This patch adds support for this hardware. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10Merge remote-tracking branches 'asoc/topic/samsung', 'asoc/topic/sgtl5000', ↵Mark Brown2-6/+36
'asoc/topic/stm32', 'asoc/topic/sunxi' and 'asoc/topic/tas571x' into asoc-next
2017-11-10Merge remote-tracking branch 'asoc/fix/sunxi' into asoc-linusMark Brown1-4/+55
2017-11-09ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+Andrea Bondavalli1-5/+24
32bit and 24bit audio capture formats for H3/H2+ are broken because the RX_SAMPLE_BITS and the RX_FIFO_MODE bits of AC_ADC_FIFOC register of the audio codec are not set to operate in 24bit mode but in 16bit mode only. The following patch sets the H3 audio codec registers and the DMA bus width properly when a 24/32bit capture is requested. Signed-off-by: Andrea Bondavalli <andrea.bondavalli74@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-09ASoC: sun8i-codec: Add a comment on the LRCK inversionMaxime Ripard1-0/+11
The current code might be a bit intriguing without having experienced the issue before, and might come up as a mistake. Make explicit what's going on by adding a comment. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-09ASoC: sun8i-codec: Set the BCLK dividerMaxime Ripard1-0/+51
While the current code was reporting to be able to work in master mode, it failed to do so because the BCLK divider wasn't programmed, meaning that the BCLK would run at the PLL's frequency no matter the sample rate. It was obviously a bit too fast. Add support to retrieve the divider to use, and set it. Since our PLL is not always able to generate a perfect multiple of the sample rate, we'll have to choose the closest divider that matches our setup. Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2017-11-08ASoC: sun8i-codec: Fix left and right channels inversionMaxime Ripard1-1/+1
Since its introduction, the codec had an inversion of the left and right channels. It turned out to be pretty simple as it appears that the codec doesn't have the same polarity on the LRCK signal than the I2S block. Fix this by inverting our bit value for the LRCK inversion. Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec") Cc: <stable@vger.kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: sun8i-codec: Invert Master / Slave conditionMaxime Ripard1-4/+4
The current code had the condition backward when checking if the codec should be running in slave or master mode. Fix it, and make the comment a bit more readable. Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-21ASoC: sun4i-i2s: Add support for H3Marcus Cooper1-2/+174
The sun8i-h3 introduces a lot of changes to the i2s block such as different register locations, extended clock division and more operational modes. As we have to consider the earlier implementation then these changes need to be isolated. None of the new functionality has been implemented yet, the driver has just been expanded to allow it work on the H3 SoC. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21ASoC: sun4i-i2s: Update global enable with bitmaskMarcus Cooper1-3/+4
The default value of the config register is different on newer SoCs and therefore enabling/disabling with a register write will clear bits used to set the direction of the clock and frame pins. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21ASoC: sun4i-i2s: Check for slave select bitMarcus Cooper1-16/+21
The newer SoCs do not have this setting. Instead they set the pin direction. Add a check to see if the bit is valid and if so set it accordingly. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21ASoC: sun4i-i2s: Add regmap field to set DAI formatMarcus Cooper1-3/+12
On the newer SoCs the bits to configure the operational mode are located in a different register. Add a regmap field so that this location can be configured. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21ASoC: sun4i-i2s: Add mclk enable regmap fieldMarcus Cooper1-2/+14
The location of the mclk output enable bit is different on newer SoCs. Use a regmap field to enable it. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21ASoC: sun4i-i2s: bclk and lrclk polarity tidyupMarcus Cooper1-13/+32
On newer SoCs the bit fields for the blck and lrclk polarity are in a different locations. Use regmap fields to set the polarity bits as intended. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21ASoC: sun4i-i2s: Add regfields for word size select and sample resolutionMarcus Cooper1-3/+28
On newer SoCs the location of the slot width select and sample resolution are different and also there is a bigger range of support. For the current supported rates then an offset is required. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21ASoC: sun4i-i2s: Add regmap fields for channelsMarcus Cooper1-8/+69
On the original i2s block the channel mapping and selection were configured for stereo audio by default: This is not the case with the newer SoCs and they are also located at different offsets. To support the newer SoC then regmap fields have been added to the quirks and these are initialised to their correct settings during probing. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21ASoC: sun4i-codec: Remove unnecessary function callDonglin Peng1-1/+0
First of all,the address of pdev->dev is assigned to card->dev in create_card,then the function platform_set_drvdata copies the value the variable card to pdev->dev.driver_data, but when calling snd_soc_register_card,the function dev_set_drvdata(card->dev, card) will also do the same copy operation,so i think that the former copy operation can be removed. Signed-off-by: Peng Donglin <dolinux.peng@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-14ASoC: sun4i-i2s: Add TX FIFO offset to quirksMarcus Cooper1-1/+6
It has been seen that the newer SoCs have a different TX FIFO address. Add this to the quirks structure. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-14ASoC: sun4i-i2s: Add regmap config to quirksMarcus Cooper1-3/+7
The newer SoCs have a larger range than the original SoC that this driver was developed for. By adding the regmap config to the quirks then the driver can initialise the managed register map correctly. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-14ASoC: sun4i-i2s: Add clkdiv offsets to quirksMarcus Cooper1-0/+8
The BCLKDIV and MCLKDIV found on newer SoCs start from an offset of 1. Add the functionality to adjust the division values according to the needs to the device being used. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>