Age | Commit message (Collapse) | Author | Files | Lines |
|
The compiler must be clever enough to optimize out for the no-op when
CONFIG_SND_CTL_VALIDATION is disabled. Let's drop the superfluous
check.
Link: https://lore.kernel.org/r/20220609120219.3937-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
cs35l41 is getting some active work and conflicts, plus some of the
fixes are needed for my testing.
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Academic correction of error handling:
In case the allocation of kc or kcontrol_type fails the correct label to
jump is hdr_err since the template.sname has been also allocated at this
point.
Fixes: d29d41e28eea6 ("ASoC: topology: Add support for multiple kcontrol types to a widget")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220331114957.519-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Other functions used for callbacks are named after function they call,
however function calling control_load seems to be an exception. Rename
it to soc_tplg_control_load().
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Error message refers to mixer, but it is used for various other types of
controls, so change it to refer to generic "controls".
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Name of SOC_TPLG_PASS_MIXER pass is bit confusing, suggesting that it
may only apply to mixers. As it is used for all control types, change
name to SOC_TPLG_PASS_CONTROL.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In practice soc_tplg_is_eof() returns boolean value and caller uses the
return value in such way, so convert the function to really do it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Functions creating kcontrols as written allow for creation of multiple
kcontrols at the same time, but in practice they are called for each
kcontrol individually. Remove unnecessary loop as code always loops once
anyway. This reduces intendation level allowing for some code to be put
on one line instead of multiple lines.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The 'while' loop can be replaced with a 'for' loop, making it more clear
about what possible values there are, by having all of it in one place,
instead of scattered around.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Before commit "ASoC: topology: Change allocations to resource managed"
soc_tplg_dapm_graph_elems_load() used to free routes on error. During
migration to managed allocations the routes table was left as is, but
looking at it again it is unnecessary, so remove routes table and just
keep pointer to DAPM route currently being set up. Also remove outdated
comments which keep describing old behavior of remove_route() freeing
memory. While it still does some cleanup, it leaves freeing memory to
framework.
Fixes: ff9226224437 ("ASoC: topology: Change allocations to resource managed")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220112170030.569712-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no reason to force readwrite access on TLV controls. It can be
either read, write or both. This is further evidenced in code where it
performs following checks:
if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_READ) && !sbe->get)
return -EINVAL;
if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_WRITE) && !sbe->put)
return -EINVAL;
Fixes: 1a3232d2f61d ("ASoC: topology: Add support for TLV bytes controls")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220112170030.569712-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_tplg_check_elem_count(), already prints an error when applicable, so
there is no need to print another one.
Also clean up alignment of arguments in if, so there is no confusion
about what is checked and what is executed if condition is true.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220112170030.569712-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
change 'postion' to 'position'
Signed-off-by: Qinghua Jin <qhjin.dev@gmail.com>
Link: https://lore.kernel.org/r/20220106092847.357035-1-qhjin.dev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: 8a9782346dcc ("ASoC: topology: Add topology core")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211116071812.18109-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Topology needs device for prints and resource allocation. So far,
component->dev is used. However, this may lead to high memory use in
model where card is an independent driver which can be reloaded and
topology is loaded from component's probe() method. Every time machine
driver is reloaded topology is being loaded anew, each time allocating
new memory. Said memory will only be freed when component itself is
being freed.
Address the problem by tying topology to component->card->dev instead,
so memory occupied by the topology is freed whenever related machine
device gets removed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_tplg_add_dcontrol() passes device as argument which is later used to
print messages. Align it with all other prints in file to use tplg->dev.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add sanity checks to make sure the data is read within file boundary.
Helps in situations where file is only partially copied or malformed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add sanity check to make sure the data is read within file boundary.
Helps in situations where file is only partially copied or malformed.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sparse reports the following warning:
sound/soc/soc-topology.c:1488:26: error: restricted __le32 degrades to
integer
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211025185933.144327-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the SOF driver, the operations performed in the complete callback
can fail and therefore topology loading should return an error in
such cases. So, change the signature of the complete op
in struct snd_soc_tplg_ops to return an int to return the error.
Also, amend the complete callback functions in the SOF driver and
the SKL driver to conform with the new signature.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A DAPM widget now can have different types of controls, it is no longer
correct to print the type as it is just the type of the first control.
Move it after the loop where we create the controls and print the number
of the control types.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210902112301.22657-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch cleanups below cppcheck warning.
sound/soc/soc-topology.c:2129:27: style: The scope of the variable 'link' can be reduced. [variableScope]
struct snd_soc_dai_link *link;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtq0wfkn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch cleanups below cppcheck warning.
sound/soc/soc-topology.c:1038:31: style: The scope of the variable 'control_hdr' can be reduced. [variableScope]
struct snd_soc_tplg_ctl_hdr *control_hdr;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8agwfkv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_tplg_dapm_widget_elems_load()
This patch cleanups below cppcheck warning.
sound/soc/soc-topology.c:1599:35: style: The scope of the variable 'widget' can be reduced. [variableScope]
struct snd_soc_tplg_dapm_widget *widget;
^
sound/soc/soc-topology.c:1600:6: style: The scope of the variable 'ret' can be reduced. [variableScope]
int ret, count, i;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmuwwfl7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch cleanups below cppcheck warning.
sound/soc/soc-topology.c:2350:27: style: The scope of the variable 'dai' can be reduced. [variableScope]
struct snd_soc_tplg_dai *dai;
^
sound/soc/soc-topology.c:2352:9: style: The scope of the variable 'ret' can be reduced. [variableScope]
int i, ret;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1fcwflh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch cleanups below cppcheck warning.
sound/soc/soc-topology.c:2576:27: style: The scope of the variable 'hdr' can be reduced. [variableScope]
struct snd_soc_tplg_hdr *hdr;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfzswflw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Heine <ch@denx.de>:
Hi,
this is v2 from my patchset that add support for the TAS2505 to the tlv320aic32x4 driver.
kind regards,
Claudius
Changes from v1:
- clarified commit message of first patch, which add the type value to the struct
- removed unnecessary code to put and get speaker volume
- removed 'Gain' from 'HP Driver Playback Volume' control
- fixed rebase issues
Claudius Heine (3):
ASoC: tlv320aic32x4: add type to device private data struct
ASoC: tlv320aic32x4: add support for TAS2505
ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
.../bindings/sound/tlv320aic32x4.txt | 1 +
sound/soc/codecs/tlv320aic32x4-i2c.c | 22 ++-
sound/soc/codecs/tlv320aic32x4-spi.c | 23 ++-
sound/soc/codecs/tlv320aic32x4.c | 139 +++++++++++++++++-
sound/soc/codecs/tlv320aic32x4.h | 10 ++
5 files changed, 186 insertions(+), 9 deletions(-)
base-commit: 70585216fe7730d9fb5453d3e2804e149d0fe201
--
2.32.0
|
|
There are spelling mistakes in comments. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210601103506.9477-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The original patch changed kcontrol_type to a pointer. In some goto
cases the pointer is assigned into a struct member as uninitialized and
this will cause a runtime error with UBSan even if it isn't a real bug.
So initialize the pointer to NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: d29d41e28eea ("ASoC: topology: Add support for multiple kcontrol types to a widget")
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210519100713.879958-1-jaska.uimonen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current dapm widget has a single variable to describe its kcontrol's
type. As there can be many kcontrols in one widget it is inherently
presumed that the types are the same.
Lately there has been use cases where different types of kcontrols would
be needed for a single widget. Thus add pointer to dapm widget to hold
an array for different kcontrol types and modify the kcontrol creation
to operate in a loop based on individual kcontrol type.
Change control creation and deletion to use individual kcontrol types in
SOF driver. This is done in the same patch for not breaking bisect. SOF
driver is also currently the only one using the dapm widget
kcontrol_type.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210507070246.404446-1-jaska.uimonen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cppcheck warning:
sound/soc/soc-topology.c:1676:52: style: Clarify calculation
precedence for '&' and '?'. [clarifyCalculation]
flags & SND_SOC_TPLG_DAI_FLGBIT_SYMMETRIC_RATES ? 1 : 0;
^
sound/soc/soc-topology.c:1680:55: style: Clarify calculation
precedence for '&' and '?'. [clarifyCalculation]
flags & SND_SOC_TPLG_DAI_FLGBIT_SYMMETRIC_CHANNELS ?
^
sound/soc/soc-topology.c:1685:57: style: Clarify calculation
precedence for '&' and '?'. [clarifyCalculation]
flags & SND_SOC_TPLG_DAI_FLGBIT_SYMMETRIC_SAMPLEBITS ?
^
sound/soc/soc-topology.c:1768:52: style: Clarify calculation
precedence for '&' and '?'. [clarifyCalculation]
flags & SND_SOC_TPLG_LNK_FLGBIT_SYMMETRIC_RATES ? 1 : 0;
^
sound/soc/soc-topology.c:1772:55: style: Clarify calculation
precedence for '&' and '?'. [clarifyCalculation]
flags & SND_SOC_TPLG_LNK_FLGBIT_SYMMETRIC_CHANNELS ?
^
sound/soc/soc-topology.c:1777:57: style: Clarify calculation
precedence for '&' and '?'. [clarifyCalculation]
flags & SND_SOC_TPLG_LNK_FLGBIT_SYMMETRIC_SAMPLEBITS ?
^
sound/soc/soc-topology.c:1782:48: style: Clarify calculation
precedence for '&' and '?'. [clarifyCalculation]
flags & SND_SOC_TPLG_LNK_FLGBIT_VOICE_WAKEUP ?
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210218221921.88991-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Sławiński<amadeuszx.slawinski@linux.intel.com>:
Topology API exposes just 2 function calls, to load and unload topology.
This adds sanity checks to make sure that it behaves well when some of
parameters are set incoorectly or not needed.
This makes developer live easier by failing early instead of proceeding
on and then failing in unexpected ways.
As loading and unloading topology usually happens one the overhead of
additional checks should be negligible.
Amadeusz Sławiński (2):
ASoC: topology: Ensure that needed parameters are set
ASoC: topology: Check if ops is set before dereference
sound/soc/soc-topology.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
--
2.25.1
|
|
snd_pcm_runtime / snd_soc_dai / snd_soc_dai_driver / snd_soc_dai_link
have related parameter which is similar but not same naming.
struct snd_pcm_runtime {
...
(A) unsigned int rate;
...
(B) unsigned int sample_bits;
...
};
struct snd_soc_dai {
...
(A) unsigned int rate;
(B) unsigned int sample_bits;
...
};
struct snd_soc_dai_driver {
...
(A) unsigned int symmetric_rates:1;
(B) unsigned int symmetric_samplebits:1;
...
};
struct snd_soc_dai_link {
...
(A) unsigned int symmetric_rates:1;
(B) unsigned int symmetric_samplebits:1;
...
};
Because it is similar but not same naming rule,
code can be verbose / can't share macro.
This patch sync naming rule for framework.
- xxx_rates;
+ xxx_rate;
- xxx_samplebits;
+ xxx_sample_bits;
old name will be removed if all drivers were switched
to new naming rule.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnweolj6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Topology can be created without ops overrides, in that case trying to
assign any value would lead to dereferencing NULL pointer.
Other places in code have either checks for tplg->ops or loop using
*_count variables, hence they can't dereference NULL pointer and there
is no need to add more checks.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20210114163602.911205-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As snd_soc_tplg_component_load is exported function, which means it is
part of API, there should be checks if it is called with proper
parameters.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20210114163602.911205-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sławiński<amadeuszx.slawinski@linux.intel.com>:
This series adds unit tests for ASoC topology.
First fix problems found when developing and running test cases and
then add tests implementation.
Tests themselves are quite simple and just call
snd_soc_tplg_component_load() with various parameters and check the
result. Tests themselves are described in more detail in commits
adding them.
Goal is to expand the amount of test cases in following patches.
Prerequisity for this patchset are 2 patches which have already been
sent:
https://lore.kernel.org/alsa-devel/20210114163602.911205-1-amadeuszx.slawinski@linux.intel.com/T/#t
Description on how typical test case itself works:
In order to load topology we need to have 3 things:
card, codec component & platform component.
In typical test case we register card and platform component and bind
to dummy codec. There are of course execeptions, when we want to
test behaviour of topology API when component or card is missing.
Note that this is bit different from typical scenario (in SOF and skylake
drivers) where card is registered by machine driver and component by
platform driver, as we register both when setting up test.
If you check the test case most of them have similar architecture of:
1.
/* run test */
ret = snd_soc_register_card(&kunit_comp->card);
if (ret != 0 && ret != -EPROBE_DEFER)
KUNIT_FAIL(test, "Failed to register card");
2.
ret = snd_soc_component_initialize(&kunit_comp->comp, &test_component, test_dev);
KUNIT_EXPECT_EQ(test, 0, ret);
3.
ret = snd_soc_add_component(&kunit_comp->comp, NULL, 0);
KUNIT_EXPECT_EQ(test, 0, ret);
Ad. 1.
First we register card, which in most tests returns -EPROBE_DEFER
(from snd_soc_bind_card()), as platform component is not yet created.
I test for both 0 and -EPROBE_DEFER, as it makes it easier to reshuffle
this code around if needed and there is one test case which does it in
different order.
Ad. 2.
Then we initialize platform component with structure pointing at proper
probe function, which calls snd_soc_tplg_component_load() with test
parameters and checks expected result.
Ad. 3.
And then in follow up we call snd_soc_add_component() which creates
platform component for us and calls snd_soc_try_rebind_card() which
if everything is bound properly calls previously set probe function.
Amadeusz Sławiński (5):
ASoC: topology: Properly unregister DAI on removal
Revert "ASoC: soc-devres: add devm_snd_soc_register_dai()"
ASoC: topology: KUnit: Add KUnit tests passing various arguments to
snd_soc_tplg_component_load
ASoC: topology: KUnit: Add KUnit tests passing empty topology with
variants to snd_soc_tplg_component_load
ASoC: topology: KUnit: Add KUnit tests passing topology with PCM to
snd_soc_tplg_component_load
include/sound/soc.h | 4 -
sound/soc/Kconfig | 17 +
sound/soc/Makefile | 5 +
sound/soc/soc-devres.c | 37 --
sound/soc/soc-topology-test.c | 843 ++++++++++++++++++++++++++++++++++
sound/soc/soc-topology.c | 9 +-
6 files changed, 870 insertions(+), 45 deletions(-)
create mode 100644 sound/soc/soc-topology-test.c
--
2.25.1
|
|
DAIs need to be removed when topology unload function is called (usually
done when component is being removed). We can't do this when device is
being removed, as structures we operate on when removing DAI can already
be freed.
Fixes: 6ae4902f2f34 ("ASoC: soc-topology: use devm_snd_soc_register_dai()")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210120152846.1703655-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The allocation uses sizeof(u32) when it should use sizeof(unsigned long)
so it leads to memory corruption later in the function when the data is
initialized.
Fixes: 5aebe7c7f9c2 ("ASoC: topology: fix endianness issues")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YAf+8QZoOv+ct526@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Dan reported that smatch reports wrong size check and after analysis it
is confirmed that we are comparing wrong value: pointer size instead of
array size. However the check itself is problematic as in UAPI header
there are two fields:
struct snd_soc_tplg_enum_control {
(...)
char texts[SND_SOC_TPLG_NUM_TEXTS][SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
__le32 values[SND_SOC_TPLG_NUM_TEXTS * SNDRV_CTL_ELEM_ID_NAME_MAXLEN / 4];
the texts field is for names and the values one for values assigned to
those named fields, after analysis it becomes clear that there is quite
a lot overhead values than we may possibly name. So instead of changing
check to ARRAY_SIZE(ec->values), as it was first suggested, use
hardcoded value of SND_SOC_TPLG_NUM_TEXTS.
Link: https://lore.kernel.org/alsa-devel/X9B0eDcKy+9B6kZl@mwanda/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When we parse "values" we perform check if there is correct number of
them. However similar check is missing in case of "texts", add it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Mirror suggested changes in alsa-lib.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201112163100.5081-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now that enum and mixer kcontrols are freed by resource management
framework, removing kcontrol becomes one function call, so simplify code
in remove_widget.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After changing memory management to resource managed one, some of the
functions became no ops, remove them as they are no longer needed.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order for topology to be resource managed, change all allocations to
be resource managed:
k*alloc -> devm_k*alloc
kstrdup -> devm_kstrdup
Exceptions where non resource managed allocation is left is
soc_tplg_dapm_widget_create(), as it uses pointer to memory locally and
frees it up after use, as well as soc_tplg_dapm_graph_elems_load(),
which has temporary pointer to table of routes.
After conversion all redundant calls in error and clean up paths were
removed.
Also removed some variables which become unneeded when there is no calls
using them.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In few places tplg->comp->dev is used, while everywhere else tplg->dev
is being used. Unify those uses towards tplg->dev, as it is being set to
comp->dev during initialization anyway.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In theory topology can be loaded in multiple steps by providing index to
snd_soc_tplg_component_load, however, from usability point of view it
doesn't make sense, as can be seen from all current users loading
topology in one go. Remove the unnecessary parameter.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Topology API exposes snd_soc_tplg_widget_remove and
snd_soc_tplg_widget_remove_all, but both are nowhere used. All current
users load and unload topology as a whole. As following commits
introduce resource managed memory, remove them to simplify code and
reduce maintenance burden.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Linux 5.9-rc5
|
|
|