summaryrefslogtreecommitdiffstats
path: root/sound/soc/sh
AgeCommit message (Collapse)AuthorFilesLines
2015-04-12Merge remote-tracking branches 'asoc/topic/omap', 'asoc/topic/qcom', ↵Mark Brown11-483/+1474
'asoc/topic/rcar' and 'asoc/topic/rt286' into asoc-next
2015-04-12Merge remote-tracking branches 'asoc/topic/dmaengine', 'asoc/topic/fsi', ↵Mark Brown1-36/+35
'asoc/topic/fsl' and 'asoc/topic/fsl-ssi' into asoc-next
2015-04-12Merge remote-tracking branches 'asoc/fix/ak4642', 'asoc/fix/atmel', ↵Mark Brown5-10/+76
'asoc/fix/cs4271', 'asoc/fix/davinci' and 'asoc/fix/rcar' into asoc-linus
2015-04-11ASoC: rnsd: fix build regression without CONFIG_OFArnd Bergmann1-0/+1
The r-car sound driver only works when CONFIG_OF is set, and after a recent change has a compile-time dependency as well: sound/built-in.o: In function `rsnd_dma_request_channel': :(.text+0x9fb84): undefined reference to `of_dma_request_slave_channel' This could be fixed either by adding a static inline wrapper for the function, or by adding a Kconfig dependency. This implements the second approach, which seems appropriate because the driver in fact has a hard dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 72adc61f4637aa3 ("ASoC: rsnd: 1st DMAC dma-names cares subnode") Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01ASoC: rsnd: add Synchronous SRC modeKuninori Morimoto1-5/+121
Renesas R-Car sound SRC (= Sampling Rate Converter) has Asynchronous/Synchronous SRC mode. Asynchronous mode is already supported via DPCM. This patch adds Synchronous mode on it. The condition of enabling Synchronous mode are - SoC is clock master - Sound uses SRC - Sound doesn't use DVC - Sound card uses DPCM (= rsrc-card card) amixer set "SRC Out Rate" on aplay xxx.wav & amixer set "SRC Out Rate" 48000 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01ASoC: rcar: mark device data as constantUwe Kleine-König1-2/+2
A driver's device data should and can be const. This is a follow-up on commit 33187fb4a203 (ASoC: rsnd: constify of_device_id array) which marked the of_device_id as const. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01ASoC: fsi: mark several data structures as constUwe Kleine-König1-3/+3
A driver's platform_device_id and device data should and can be const. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01ASoC: fsi: reorder code to make a forward declaration superfluousUwe Kleine-König1-35/+34
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-31ASoC: fsi: fix license specificationUwe Kleine-König1-1/+1
According to the file header only GPL v2 applies to it. Fix the MODULE_LICENSE parameter accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27ASoC: rsnd: add DPCM based sampling rate convertKuninori Morimoto3-5/+63
This patch supports DPCM based sampling rate convert on Renesas sound driver. It assumes... 1. SRC is implemented as FE 2. BE dai_link supports .be_hw_params_fixup Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27ASoC: rsnd: remove useless debug messageKuninori Morimoto6-70/+2
This patch removes useless debug message. especially some kind of "probed" message will be printed from core.c if it has #define DEBUG Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27Merge branch 'asoc-fix-rcar' into HEADMark Brown5-10/+76
2015-03-27ASoC: rsnd: call clk_prepare/unprepare() in probe/removeKuninori Morimoto5-10/+76
clk_prepare_enable()/clk_disable_unprepare() uses mutex inside, in concretely clk_prepare()/clk_unprepare().And it uses __schedule(). Then, raw_spin_lock/unlock_irq() is called, and it breaks Renesas sound driver's spin lock irq. This patch separates thesse into clk_prepare()/clk_unprepare() and clk_enable/clk_disable. And call clk_prepare()/clk_unprepare() from probe/remove function. Special thanks to Das Biju. Reported-by: Das Biju <biju.das@bp.renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27ASoC: rsrc-card: add .be_hw_params_fixup support for convert rateKuninori Morimoto1-2/+25
Current rsnd-dpcm-card is supporting DPCM FE/BE sound card. This patch adds .be_hw_params_fixup and enabled sampling convert rate. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27ASoC: rsrc-card: add Renesas sampling rate convert sound card supportKuninori Morimoto3-1/+498
Renesas sound card has "sampling rate convert" feature which should be implemented via DPCM. But, sound card driver point of view, it is difficult to add this DPCM feature on simple-card driver. Especially, DT binding support is very difficult. This patch implements DPCM feature on DT as Renesas specific sound card. This new driver is copied from current simple-card driver. Main difference between simple-card and this driver are... 1. removed unused feature from simple-card 2. removed driver named prefix from DT property 3. CPU will be FE, CODEC will be BE with snd-soc-dummy 4. it supports sampling rate convert via .be_hw_params_fixup 5. board specific routing is implemented in driver Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-24ASoC: rsnd: Fix duplicate const for DVC ramp ratesKrzysztof Kozlowski1-1/+1
Replace duplicated const keyword for 'dvc_ramp_rate' with proper array of const pointers to const strings. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22ASoC: rsnd: add dai_link stream nameKuninori Morimoto2-0/+9
This patch adds missing dai_link stream_name which is used when DPCM Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22ASoC: rsnd: show debug info for sampling rate convertKuninori Morimoto1-0/+2
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22ASoC: rsnd: tidyup error message formatKuninori Morimoto1-1/+1
This driver sometimes fixups debug/error message format 30cc4faf703955cd5cd07da489bd817ae43e3fec (ASoC: rsnd: tidyup debug message format and timing) 337b0b4c5f415705f1b97df57cecfac45903449a (ASoC: rsnd: error meesage indicates its port) But, it still exist un-fomated error message. This patch fixup it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22ASoC: rsnd: no more SRC restart when unusual situationKuninori Morimoto1-3/+7
It will be SRC interrupt endless loop f unusual situation happen. This patch adds restart limit for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22ASoC: rsnd: no more SSI restart when unusual situationKuninori Morimoto1-3/+6
It will be SSI interrupt endless loop f unusual situation happen. This patch adds restart limit for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22ASoC: rsnd: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22ASoC: fsi: constify of_device_id arrayFabian Frederick1-2/+2
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11ASoC: rsnd: add regmap_config::name for debugfsKuninori Morimoto1-0/+1
Renesas sound driver needs SSI/SRC/DVC regmaps, but it didn't have regmap_config::name for devm_regmap_init_mmio(). Thus, debugfs initialization code tried to use same driver name many times, and failed. This patch adds eacy own name for regmap_config::name Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11ASoC: rsnd: recover PIO mode for new dma interfaceKuninori Morimoto1-1/+18
Renesas sound driver needs 1st/2nd DMA interface, and 1st DMA is using DMAEngine, and 2nd is using local method now. 2nd DMA had been DMAEngine, but it was moved to local method by previous patchset. But then, it lost PIO mode fallback when probe. this patch recovers it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11ASoC: rsnd: Use %pad to print dma_addr_t in rsnd_dmapp_init()Geert Uytterhoeven1-2/+2
sound/soc/sh/rcar/dma.c: In function 'rsnd_dmapp_init': sound/soc/sh/rcar/dma.c:341:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] dev_dbg(dev, "id/src/dst/chcr = %d/%x/%x/%08x\n", ^ sound/soc/sh/rcar/dma.c:341:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] Fixes: 288f392e729dd4d3 ("ASoC: rsnd: add Audio DMAC peri peri support rework") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: 1st DMAC dma-names cares subnodeKuninori Morimoto6-49/+95
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: dvc: add rsnd_dvc_of_node()Kuninori Morimoto1-0/+3
This patch adds rsnd_dvc_of_node() to get DVC subnode from DT. This is prepare for new DT bindings for 1st DMAC Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: src: add rsnd_src_of_node()Kuninori Morimoto1-1/+4
This patch adds rsnd_src_of_node() to get SRC subnode from DT. This is prepare for new DT bindings for 1st DMAC Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: ssi: add rsnd_ssi_of_node()Kuninori Morimoto1-1/+3
This patch adds rsnd_ssi_of_node() to get SSI subnode from DT. This is prepare for new DT bindings for 1st DMAC Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: enable rsnd_ssi_use_busif() for DMAKuninori Morimoto3-2/+3
Renesas R-Car sound driver uses SSI, but the DMA interfaces are SSI/SSIU. This interface is based on SSI/SRC/DVC connection. And DMA function needs to know which interface is used somehow. This patch enables rsnd_ssi_use_busif() for DMA. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: use union with rsnd_dmaen / rsnd_dmappKuninori Morimoto2-17/+39
Renesas R-Car needs 2 DMACs.1st DMAC is DMAEngine, and 2nd DMAC is implemented as local code. These 2 DMACs are never shared. We can use union for these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: remove rsnd_dma::dirKuninori Morimoto2-4/+2
DMAEngine direction can be calculated from rsnd_dai_stream, So, rsnd_dma::dir does not make sense now. Let's remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: remove rsnd_dma::addrKuninori Morimoto2-3/+0
DMAEngine for Renesas R-Car driver is used only for Audio DMAC now. rsnd_dma::addr was added to support Audio DMAC peri peri, but it is no longer needed. Let's remove it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: add Audio DMAC peri peri support reworkKuninori Morimoto3-2/+221
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. Audio DMAC peri peri is controlled from sound driver without DMAEngine by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: enable to care 1st / 2nd DMAC on rsnd_dma_xxx()Kuninori Morimoto2-25/+65
rsnd driver needs to care about Audio DAMC (via DMAEngine), Audio DMAC peri peri (via local method) on rsnd driver. This patch adds new rsnd_dma_ops and care it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: move rsnd_gen_dma_addr() from gen.c to dma.cKuninori Morimoto3-116/+117
Now, we have dma.c for Audio DMAC / Audio DMAC peri peri. rsnd_gen_dma_addr() should go there. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: add dma.c for Audio DMAC / Audio DMAC peri periKuninori Morimoto3-219/+232
Renesas sound driver had been assumed that Audio DMAC / Audio DMAC peri peri are implemented by DMAEngine. But, result of DMA ML discussion, it was concluded that it is not a general purpose DMAC. And it should be moved from current DMAEngine to rsnd driver. So, Audio DMAC peri peri become non DMAEngine. OTOH, ALSA SoC has soc-generic-dmaengine-pcm implementation. but it seems difficult to use this generic implementation on rsnd driver at this point, since it needs to fallback to PIO mode if DMA can't use. and additionally it needs 2 DMAC (= Audio DMAC / Audio DMAC peri peri). These are not "generic" feature. Of course I will try to use this generic dmaengine in the future somehow, but just use current style at this point until it can formally use 2 DMACs. This patch adds new dma.c and moves current dma code to dma.c from core.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: add rsnd_gen_get_phy_addr() to get physical addressKuninori Morimoto2-5/+12
physical address is required from Audio DMAC peri peri. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: enable to get resource by nameKuninori Morimoto1-10/+13
rsnd driver needs to support Audio DMAC peri peri inside sound driver. getting resource by name is useful for it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: tidyup rsnd_dma_to_mod() macro declaration positionKuninori Morimoto1-1/+2
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: remove un-needed parameter from rsnd_dma_quit()Kuninori Morimoto4-7/+5
priv is not used on rsnd_dma_quit() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: remove unused rsnd_dma_available()Kuninori Morimoto4-10/+0
rsnd_dma_available() is not used. Let's remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: remove un-needed parameter from rsnd_dma_init()Kuninori Morimoto4-19/+5
It can get DMA direction via rsnd_dai_stream. Remove un-needed is_play from rsnd_dma_init(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07ASoC: rsnd: remove SH-DMA-BASE specific implementationKuninori Morimoto2-2/+0
Renesas R-Car sound had SH-DMA-BASE specific implementation before, but, now, it is no longer needed. Let's remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04Merge remote-tracking branch 'asoc/fix/rsnd' into asoc-linusMark Brown1-2/+2
2015-02-09ASoC: rsnd: set device data before snd_soc_register_platform/componentKuninori Morimoto1-2/+2
Set device data before snd_soc_register_platform/component. Otherwise, it will use NULL pointer if user calls unbind -> bind or rmmod -> insmod Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-04Merge remote-tracking branches 'asoc/topic/rx51', 'asoc/topic/samsung', ↵Mark Brown3-13/+0
'asoc/topic/sh', 'asoc/topic/simple' and 'asoc/topic/sta32x' into asoc-next
2015-02-04Merge remote-tracking branches 'asoc/topic/omap', 'asoc/topic/pxa' and ↵Mark Brown7-261/+392
'asoc/topic/rcar' into asoc-next
2015-02-04Merge remote-tracking branches 'asoc/topic/doc', 'asoc/topic/dwc', ↵Mark Brown1-6/+3
'asoc/topic/fsi', 'asoc/topic/fsl' and 'asoc/topic/fsl-asrc' into asoc-next
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-14 11:48:12 +0000