| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
SSI BUSIF buffer is possible to overflow or underflow, especially in a
hypervisor environment. If there is no interrupt support, it will eventually
lead to errors in pcm data.
This patch adds overflow and underflow interrupt support for SSI BUSIF buffer.
Reported-by: Chen Li <licheng0822@thundersoft.com>
Signed-off-by: Yongbo Zhang <giraffesnn123@gmail.com>
Tested-by: Chen Li <licheng0822@thundersoft.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200512093003.28332-1-giraffesnn123@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of
a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2
- the same logic as in rsnd_ssi_start. The attempt to disable these SSIs
was harmless, but caused a "status check failed" message to be printed
for every SSI in the multi-SSI setup.
The disabling of interrupts is still performed, as they are enabled for
all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the
EN bit for an SSI where it was not set by rsnd_ssi_start.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The master SSI of a multi-SSI setup was attached both to the
RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream.
This is not correct wrt. the meaning of being "parent" in the rest of
the SSI code, where it seems to indicate an SSI that provides clock and
word sync but is not transmitting/receiving audio data.
Not treating the multi-SSI master as parent allows removal of various
special cases to the rsnd_ssi_is_parent conditions introduced in commit
a09fb3f28a60 ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode").
It also fixes the issue that operations performed via rsnd_dai_call()
were performed twice for the master SSI. This caused some "status check
failed" spam when stopping a multi-SSI stream as the driver attempted to
stop the master SSI twice.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HDMI?_SEL register maps up to four stereo SSI data lanes onto the
sdata[0..3] inputs of the HDMI output block. The upper half of the
register contains four blocks of 4 bits, with the most significant
controlling the sdata3 line and the least significant the sdata0 line.
The shift calculation has an off-by-one error, causing the parent SSI to
be mapped to sdata3, the first multi-SSI child to sdata0 and so forth.
As the parent SSI transmits the stereo L/R channels, and the HDMI core
expects it on the sdata0 line, this causes no audio to be output when
playing stereo audio on a multichannel capable HDMI out, and
multichannel audio has permutated channels.
Fix the shift calculation to map the parent SSI to sdata0, the first
child to sdata1 etc.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The parent SSI of a multi-SSI setup must be fully setup, started and
stopped since it is also part of the playback/capture setup. So only
skip the SSI (as per commit 203cdf51f288 ("ASoC: rsnd: SSI parent cares
SWSP bit") and commit 597b046f0d99 ("ASoC: rsnd: control SSICR::EN
correctly")) if the SSI is parent outside of a multi-SSI setup.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87eetjir4x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The alignment of the continuation of the devm_ioremap() call in
fsi_probe() was broken. Join the lines, as all parameters can fit on a
single line.
Fixes: 4bdc0d676a643140 ("remove ioremap_nocache and devm_ioremap_nocache")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200212085008.9652-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As the diffstat shows we've had again a lot of works done for this
cycle: the majority of changes are the continued componentization and
code refactoring in ASoC, the tree-wide PCM API updates and cleanups
and SOF updates while a few ASoC driver updates are seen, too.
Here we go, some highlights:
Core:
- Finally y2038 support landed to ALSA ABI; some ioctls have been
extended and lots of tricks were applied
- Applying the new managed PCM buffer API to all drivers; the API
itself was already merged in 5.5
- The already deprecated dimension support in ALSA control API is
dropped completely now
- Verification of ALSA control elements to catch API misuses
ASoC:
- Further code refactorings and moving things to the component level
- Lots of updates and improvements on SOF / Intel drivers; now
including common HDMI driver and SoundWire support
- New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011,
RT1015 and RT1308
HD-audio:
- Improved ring-buffer communications using waitqueue
- Drop the superfluous buffer preallocation on x86
Others:
- Many code cleanups, mostly constifications over the whole tree
- USB-audio: quirks for MOTU, Corsair Virtuoso, Line6 Helix
- FireWire: code refactoring for oxfw and dice drivers"
* tag 'sound-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (638 commits)
ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82
ALSA: hda: Add Clevo W65_67SB the power_save blacklist
ASoC: soc-core: remove null_snd_soc_ops
ASoC: soc-pcm: add soc_rtd_trigger()
ASoC: soc-pcm: add soc_rtd_hw_free()
ASoC: soc-pcm: add soc_rtd_hw_params()
ASoC: soc-pcm: add soc_rtd_prepare()
ASoC: soc-pcm: add soc_rtd_shutdown()
ASoC: soc-pcm: add soc_rtd_startup()
ASoC: rt1015: add rt1015 amplifier driver
ASoC: madera: Correct some kernel doc
ASoC: topology: fix soc_tplg_fe_link_create() - link->dobj initialization order
ASoC: Intel: skl_hda_dsp_common: Fix global-out-of-bounds bug
ASoC: madera: Correct DMIC only input hook ups
ALSA: cs46xx: fix spelling mistake "to" -> "too"
ALSA: hda - Add docking station support for Lenovo Thinkpad T420s
ASoC: Add MediaTek MT6660 Speaker Amp Driver
ASoC: dt-bindings: rt5645: add suppliers
ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double()
ASoC: dapm: add snd_soc_dapm_put_enum_double_locked
...
|
|
Now, snd_soc_dai_driver::bus_control is used for how to resume.
But, no driver which has bus_control has DAI driver suspend/resume
support.
This patch removes pointless bus_control from ALSA SoC.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnffx7i4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
ASoC PCM core deals the empty ioctl field now as default.
Let's kill the redundant lines.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191210145406.21419-15-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the driver with the new managed buffer allocation API.
The hw_params and hw_free callbacks became superfluous (the rest were
only debug prints) and got dropped.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191210142614.19405-10-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the driver with the new managed buffer allocation API.
The hw_params and hw_free callbacks became superfluous and got
dropped.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191210142614.19405-8-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the driver with the new managed buffer allocation API.
The superfluous snd_pcm_lib_malloc_pages() and
snd_pcm_lib_free_pages() calls are dropped.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191210142614.19405-9-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the drivers with the new managed buffer allocation API.
The superfluous snd_pcm_lib_malloc_pages() and
snd_pcm_lib_free_pages() calls are dropped.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191210142614.19405-7-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sound card disconnecting operation was needed when "sound driver" was
unbinded without unbinding "sound card".
In such case, sound driver should be stopped even though it was
playbacking/capturing. Otherwise clock open/close counter mismatch happen.
One headache was that we can't skip unbind in error case because unbind
operation doesn't check return value from each drivers.
snd_soc_disconnect_sync() was added for these purpose, and Renesas
sound card only is used it.
But now, ALSA SoC automatically disconnect sound card when sound driver
was unbinded. Thus, snd_soc_disconnect_sync() is no longer needed.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87eexdyq6p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need to store the inverted DALIGN values in the table, as
they can easily be calculated at run-time. This also protects against
the introduction of inconsistencies between normal and inverted values
by a future table modification.
Reorder the two subexpressions in the AND check, to perform the least
expensive check first.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191202155834.22582-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More updates for v5.5
Some more development work for v5.5. Highlights include:
- More cleanups from Morimoto-san.
- Trigger word detection for RT5677.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
The current driver only sets 0x76543210 and 0x67452301 for DALIGN.
This doesn’t work well for TDM split and ex-split mode for all SSIU.
This patch programs the DALIGN registers based on the SSIU number.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Fixes: a914e44693d41b ("ASoC: rsnd: more clear rsnd_get_dalign() for DALIGN")
Signed-off-by: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191121111023.10976-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.5
|
|
chan > 8 or chan < 0 shouldn't happen.
This patch uses WARN_ON() for such case.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2x530a4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently each SSI unit's busif dma address is calculated by
following calculation formula:
0xec540000 + 0x1000 * id + busif / 4 * 0xA000 + busif % 4 * 0x400
But according to R-Car3 HW manual 41.1.4 Register Configuration,
ssi9 4/5/6/7 busif data register address
(SSI9_4_BUSIF/SSI9_5_BUSIF/SSI9_6_BUSIF/SSI9_7_BUSIF)
are out of this rule.
This patch updates the calculation formula to correct
ssi9 4/5/6/7 busif data register address.
Fixes: 5e45a6fab3b9 ("ASoc: rsnd: dma: Calculate dma address with consider of BUSIF")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
[erosca: minor improvements in commit description]
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191022185429.12769-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds missing of_node_put() for
rsnd_parse_tdm_split_mode()
rsnd_parse_connect_graph()
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736fkyzx8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to R-Car3 HW manual 40.3.3 (Data Format on Audio Local Bus),
in case of monaural data writing or reading through Audio-DMAC,
it's always in Left Justified format, so both src and dst
DMA Bus width should be equal to physical data width.
Therefore set src and dst's DMA bus width to:
- [monaural case] data width
- [non-monaural case] 32bits (as prior applying the patch)
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191022185518.12838-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Unlike other format-related DAI parameters, rdai->bit_clk_inv flag
is not properly re-initialized when setting format for new stream
processing. The inversion, if requested, is then applied not to default,
but to a previous value, which leads to SCKP bit in SSICR register being
set incorrectly.
Fix this by re-setting the flag to its initial value, determined by format.
Fixes: 1a7889ca8aba3 ("ASoC: rsnd: fixup SND_SOC_DAIFMT_xB_xF behavior")
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Junya Monden <jmonden@jp.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191016124255.7442-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_pcm_ops is no longer needed.
Let's use component driver callback.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wodn90f7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_pcm_ops is no longer needed.
Let's use component driver callback.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2y390fc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_pcm_ops is no longer needed.
Let's use component driver callback.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhij90fh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_pcm_ops is no longer needed.
Let's use component driver callback.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rvvaf02.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SSI need to use rsnd_channel_normalization() for TDM-split mode,
thus, channel check need to do after that.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l1aw39d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
ADG is using clk_get_rate() under atomic context, thus, we might
have scheduling issue.
To avoid this issue, we need to get/keep clk rate under
non atomic context.
We need to handle ADG as special device at Renesas Sound driver.
From SW point of view, we want to impletent it as
rsnd_mod_ops :: prepare, but it makes code just complicate.
To avoid complicated code/patch, this patch adds new clk_rate[] array,
and keep clk IN rate when rsnd_adg_clk_enable() was called.
Reported-by: Leon Kong <Leon.KONG@cn.bosch.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Leon Kong <Leon.KONG@cn.bosch.com>
Link: https://lore.kernel.org/r/87v9vb0xkp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch provides the needed infrastructure to support calling hw_free()
at the DAI level. This is for example required to free resources allocated
in hw_params() callback.
The modification of __rsnd_mod_add_hw_params does not have any side
effects because rsnd_mod_ops::hw_params callback is not used by anyone
until now.
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Link: https://lore.kernel.org/r/20190722072403.11008-2-jiada_wang@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When SSI9 is sharing pin with SSI0, we need to care about it,
but is missing. This patch fixup it.
Reported-by: Hien Dang <hien.dang.eb@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Chaoliang Qin <chaoliang.qin.jg@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
R-Car Sound can use pin sharing and multi-SSI for
SSI0/1/2/3/4/9.
Because complex HW settings and spaghetti code,
the settings for SSI9 pin sharing with SSI0 doesn't work.
This patch tidyup settings for it.
Reported-by: Hien Dang <hien.dang.eb@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Chaoliang Qin <chaoliang.qin.jg@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit c16015f36cc1 ("ASoC: rsnd: add .get_id/.get_id_sub")
introduces rsnd_ctu_id which calcualates and gives
the main Device id of the CTU by dividing the id by 4.
rsnd_mod_id uses this interface to get the CTU main
Device id. But this commit forgets to revert the main
Device id calcution previously done in rsnd_ctu_probe_
which also divides the id by 4. This path corrects the
same to get the correct main Device id.
The issue is observered when rsnd_ctu_probe_ is done for CTU1
Fixes: c16015f36cc1 ("ASoC: rsnd: add .get_id/.get_id_sub")
Signed-off-by: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_dai_driver :: pcm_new has snd_soc_dai as parameter, but
snd_soc_component_driver :: pcm_new doesn't have it.
rsnd driver needs snd_soc_dai at pcm_new.
This patch moves .pcm_new from snd_soc_component_driver to
snd_soc_dai_driver, and don't use rtd->cpu_dai anymore.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rsnd need to use 8ch clock settings for 6ch for TDM.
Otherwise, it can't work correctly.
This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Linux 5.1-rc1
|
|
compiler complains about following declarations
sound/soc/sh/rcar/src.c:174:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration]
const static u32 bsdsr_table_pattern1[] = {
^~~~~
sound/soc/sh/rcar/src.c:183:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration]
const static u32 bsdsr_table_pattern2[] = {
^~~~~
sound/soc/sh/rcar/src.c:192:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration]
const static u32 bsisr_table[] = {
^~~~~
sound/soc/sh/rcar/src.c:201:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration]
const static u32 chan288888[] = {
^~~~~
sound/soc/sh/rcar/src.c:210:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration]
const static u32 chan244888[] = {
^~~~~
sound/soc/sh/rcar/src.c:219:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration]
const static u32 chan222222[] = {
^~~~~
This patch moves the 'static' keyword to the front of the
declaration to fix the compiler warnings
Fixes: linux-next commit 7674bec4fc09 ("ASoC: rsnd: update BSDSR/BSDISR handling")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
lockdep warns us that priv->lock and k->k_lock can cause a
deadlock when after acquire of k->k_lock, process is interrupted
by src, while in another routine of src .init, k->k_lock is
acquired with priv->lock held.
This patch avoids a potential deadlock by not calling soc_device_match()
in SRC .init callback, instead it adds new soc fields in priv->flags to
differentiate SoCs.
Fixes: linux-next commit 7674bec4fc09 ("ASoC: rsnd: update BSDSR/BSDISR handling")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: More changes for v5.1
Another batch of changes for ASoC, no big core changes - it's mainly
small fixes and improvements for individual drivers.
- A big refresh and cleanup of the Samsung drivers, fixing a number of
issues which allow the driver to be used with a wider range of
userspaces.
- Fixes for the Intel drivers to make them more standard so less likely
to get bitten by core issues.
- New driver for Cirrus Logic CS35L26.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.1
|
|
Currently each SSI unit 's busif mode/adinr/dalign address is
registered by: (in busif4 case)
RSND_GEN_M_REG(SSI_BUSIF4_MODE, 0x500, 0x80)
RSND_GEN_M_REG(SSI_BUSIF4_ADINR,0x504, 0x80)
RSND_GEN_M_REG(SSI_BUSIF4_DALIGN, 0x508, 0x80)
But according to user manual 41.1.4 Register Configuration
ssi9 4/5/6/7 busif mode/adinr/dalign register address
( SSI9-[4/5/6/7]_BUSIF_[MODE/ADINR/DALIGN] )
are out of this rule.
This patch registers ssi9 4/5/6/7 mode/adinr/dalign register
as single register, and access these registers in case of
SSI9 BUSIF 4/5/6/7.
Fixes: commit 8c9d75033340 ("ASoC: rsnd: ssiu: Support BUSIF other than BUSIF0")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.1
|
