summaryrefslogtreecommitdiffstats
path: root/sound/soc/omap
AgeCommit message (Collapse)AuthorFilesLines
2012-10-27ASoC: omap-dmic: Correct functional clock namePeter Ujfalusi1-2/+2
We should really use "fck" when asking for the functional clock and not "dmic_fck". This way we can ensure that multiple dmic modules can exist in the system. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-27ASoC: zoom2: Fix compile error by including correct header filesTony Lindgren1-3/+2
Also drop the includes that are no longer needed and just cause problems for the ARM common zImage. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> [tony@atomide.com: updated to drop unneeded headers] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17Merge tag 'asoc-3.7' of ↵Takashi Iwai3-41/+33
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.7 Nothing too exciting except for the ams-delta change which is relatively lerge due to the fact that the driver loading had been totally broken as the driver needed a newer API to function.
2012-10-09Merge tag 'sound-3.7' of ↵Linus Torvalds19-1015/+579
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
2012-10-04ASoC: ams-delta: Convert to use snd_soc_register_card()Janusz Krzysztofik1-33/+30
The old method of registering with the ASoC core by creating a "soc-audio" platform device no longer works for Amstrad Delta sound card after recent changes to drvdata handling (commit 0998d0631001288a5974afc0b2a5f568bcdecb4d, 'device-core: Ensure drvdata = NULL when no driver is bound'. Use snd_soc_register_card() method instead, as suggested by the ASoC core generated warning message, and move both the card and codec platform device registration to the arch board file where those belong. Created and tested against linux-3.6-rc5. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-04ASoC: omap-mcpdm: Remove OMAP revision checkPeter Ujfalusi1-7/+2
The OMAP revision check is not needed since the watchdog bit is not in use on 4430 ES1.0 and have no effect when we set the bit. The watchdog need to be enabled on all other revisions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-04ASoC: Fix wrong include for McPDMTony Lindgren1-1/+1
McPDM needs platt/cpu.h for omap_rev and not omap_hwmod.h. Drivers must not include omap_hwmod.h at, it will be private to mach-omap2 soon. Fix the problem before other drivers will also start including omap_hwmod.h. Note that also plat/cpu.h will be going away, so the omap_rev check needs to be replaced with mcpdm-watchdog flag from platform_data or DT. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-04ASoC: omap-abe-twl6040: Fix typo of VibratorPeter Ujfalusi1-1/+1
It is not Vinrator but Vibrator. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIOPeter Ujfalusi1-4/+0
Remove the use of set_hs_extmute callback and let the codec driver to handle the extmute GPIO. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm: Convert to use dmaenginePeter Ujfalusi2-211/+61
Original author: Russell King <rmk+kernel@arm.linux.org.uk> Switch the omap-pcm to use dmaengine. Certain features are not supported by after dmaengine conversion: 1. No period wakeup mode DMA engine has no way to communicate this information through standard channels. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup timePeter Ujfalusi4-15/+21
Set the dma_data for the stream (snd_soc_dai_set_dma_data) at dai_startup time so omap-pcm will have access to the needed information regarding to the DMA channel earlier. This is needed for the clean dmaengine support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm, omap-dmic: Change the use of omap_pcm_dma_data->data_typePeter Ujfalusi3-4/+5
Instead of the OMAP DMA data type definition the data_type will be used to specify the number of bits the DMA word should be configured or 0 in case when based on the stream's format the omap-pcm can decide the needed DMA word size. This feature is needed for the omap-hdmi where the sDMA need to be configured for 32bit word type regardless of the audio format used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: mcbsp, mcpdm, dmic: Let omap-pcm to pick the dma_typePeter Ujfalusi3-8/+0
omap-pcm can figure out the correct dma_type based on the stream's format. In this way we can get rid of the plat/dma.h include from these drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-mcpdm: Use platform_get_resource_* to get resourcesPeter Ujfalusi1-4/+23
Get the needed resources in a correct way and avoid using defines for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm: Prepare to configure the DMA data_type based on stream ↵Peter Ujfalusi1-2/+29
properties Based on the format of the stream the omap-pcm can decide alone what data type should be used with by the sDMA. Keep the possibility for OMAP dai drivers to tell omap-pcm if they want to use different data type. This is needed for the omap-hdmi for example which needs 32bit data type even if the stream format is S16_LE. The check if (dma_data->data_type) is safe at the moment since omap-pcm does not support 8bit samples (OMAP_DMA_DATA_TYPE_S8 == 0x00). The next step is to redefine the meaning of dma_data->data_type to unblock this limitation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: Remove sync_mode from omap_pcm_dma_data structPeter Ujfalusi5-9/+1
The omap-pcm platform driver no longer needs this parameter to select between ELEMENT and PACKET mode. The selection is based on the configured packet_size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm: Select sDMA synchronization based on packet_sizePeter Ujfalusi1-1/+6
Since we only have element or packet synchronization we can use the dma_data->packet_size to select the desired mode: if packet_size is 0 we use ELEMENT mode if packet_size is not 0 we use PACKET mode for sDMA synchronization. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-mcbsp: Use sDMA packet mode instead of frame modePeter Ujfalusi1-30/+17
When McBSP is configured in threshold mode we can use sDMA packet mode in all cases. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-20Merge tag 'omap-cleanup-local-headers-for-v3.7' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: This branch contains mostly scripted changes to make omap header files local where possible to get us closer to supporting the ARM single zImage. After these changes mach includes are pretty much out of the way for omap2+, but still lots of manual work remains to sort through the remaining plat includes. * tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits) ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local ARM: OMAP2+: Make ctrl_module_core_44xx.h local ARM: OMAP2+: Make board-rx51.h local ...
2012-09-20Merge tag 'tegra-for-3.7-dmaengine' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup ARM: tegra: switch to dmaengine The Tegra code-base has contained both a legacy DMA and a dmaengine driver since v3.6-rcX. This series flips Tegra's defconfig to enable dmaengine rather than the legacy driver, and removes the legacy driver and all client code. * tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ASoC: tegra: remove support of legacy DMA driver based access spi: tegra: remove support of legacy DMA driver based access ARM: tegra: apbio: remove support of legacy DMA driver based access ARM: tegra: dma: remove legacy APB DMA driver ARM: tegra: config: enable dmaengine based APB DMA driver + sync to 3.6-rc6
2012-09-20ARM: OMAP1: Move board-ams-delta.h from plat to machTony Lindgren1-1/+1
This is only used by omap1. And to fix things properly, this should not be included from the drivers at all. Acked-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Cc: linux-mtd@lists.infradead.org Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: alsa-devel@alsa-project.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-19ARM: omap: move platform_data definitionsArnd Bergmann14-14/+14
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
2012-09-15Merge tag 'asoc-3.6' of ↵Takashi Iwai1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for 3.6 A bigger set of updates than I'm entirely comfortable with - things backed up a bit due to travel. As ever the majority of these are small, focused updates for specific drivers though there are a couple of core changes. There's been good exposure in -next. The AT91 patch fixes a build break.
2012-09-12ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren2-4/+2
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP2+: Prepare for irqs.h removalTony Lindgren3-0/+4
As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP: Move gpio.h to include/linux/platform_dataTony Lindgren1-0/+1
This way we can remove includes of plat/gpio.h which won't work with the single zImage support. Note that we also remove the cpu_class_is_omap2() check in gpio-omap.c as the drivers should not call it as we need to make it local to arch/arm/mach-omap2 for single zImage support. While at it, arrange the related includes in the standard way. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mtd@lists.infradead.org Cc: alsa-devel@alsa-project.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-11ASoC: am3517evm: Remove unused cpu_dai from hw_paramsPeter Ujfalusi1-1/+0
cpu_dai is not in use in this function and just generates warning at compile time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05Merge branch 'asoc-omap' into for-3.7Mark Brown1-31/+0
2012-09-05ASoC: omap-mcbsp: Fix compilation error due to leftover codePeter Ujfalusi1-31/+0
Part of commit (which patches sound/soc/omap/mcbsp.c file): 8fef626 ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code since the tree where it has been applied did not had the earlier patch: d0db84e ASoC: omap-mcbsp: Fix 6pin mux configuration which changed code around omap_mcbsp_6pin_src_mux(). Because of the missing part from 8fef626 the sound/soc/omap/mcbsp.c does not compile in linux-next. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05Merge tag 'v3.6-rc4' into asoc-omapMark Brown3-1/+3
Linux 3.6-rc4
2012-08-25Merge branch 'asoc-omap' into for-3.7Mark Brown1-37/+27
2012-08-25ASoC: omap-mcbsp: Single macro for st channel volume set/getPeter Ujfalusi1-10/+7
Since we always need to have set and get callbacks for McBSP sidetone it makes sense to combine the two macro to create the two callbacks. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: omap-mcbsp: Use macro to create the McBSP2/3 ST controlsPeter Ujfalusi1-24/+15
To remove duplicated code from the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: omap-mcbsp: Only print warning if the st_data is missing for the portPeter Ujfalusi1-2/+4
When asked to add the ST controls warn only if the st_data is missing. In this way we do not block the otherwise functional card to probe. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: omap-mcbsp: Check mcbsp->id instead of cpu_dai->id when adding ST controlsPeter Ujfalusi1-1/+1
In ddevice tree booted kernel all device have unique name and their device id is set to 0. Use the mcbsp->id for checking to decide which control set we should add for McBSP sidetone handling. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22Merge branch 'asoc-omap' into for-3.7Mark Brown5-79/+101
2012-08-22ASoC: omap-mcbsp: Add device tree bindingsPeter Ujfalusi1-1/+65
Device tree support for McBSP modules on OMAP2+ SoC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the codePeter Ujfalusi1-3/+5
We can use the has_ccr flag to replace the cpu_is_omap* checks. This provides future proof implementation and we do not need to update the code if new OMAP revision starts to use the McBSP driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ASoC: omap-mcbsp: Remove unused definesPeter Ujfalusi1-16/+0
NUM_LINKS is no longer in use by the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration codePeter Ujfalusi3-36/+3
Remove the feature to configure the CLKR/FSR mux on McBSP port with 6pin configuration. When moving to devicetree these callback can no longer be used in a clean way anymore. If a board require to change the 6pin port to work in 4pin setup it needs to set up the mux in the board file. For OMAP2/3: u32 devconf0; /* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */ devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK; omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); For OMAP4: u32 mcbsp_pad; /* McBSP4 CLKR/FSR signal to be connected to CLKX/FSX pin */ mcbsp_pad = omap4_ctrl_pad_readl(OMAP2_CONTROL_DEVCONF0); mcbsp_pad |= ((1 << 31) | (1 << 30)); omap4_ctrl_pad_writel(mcbsp_pad, OMAP2_CONTROL_DEVCONF0); In case when the kernel is booted with DT blob the pinctrl-single will be provided as soon as it is enabled on the platform. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxingPeter Ujfalusi1-18/+2
The muxing is done at board level, no need to do it in the ASoC machine driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driverPeter Ujfalusi1-5/+26
Move the McBSP CLKS re-parenting code to ASoC driver from arch/arm/mach-omap2. The call fort the re-parenting has been already limited to OMAP2+ SoC in the ASoC driver. There is no longer need to have callback function for it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-20ASoC: am3517evm: fix error return codeJulia Lawall1-1/+1
It was forgotten to initialize ret to the result of calling snd_soc_dai_set_sysclk, unlike at the other calls in the same function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-15Merge remote-tracking branch 'asoc/topic/omap' into for-3.7Mark Brown7-553/+203
2012-08-15ASoC: Remove obsolete OMAP3 machine driversPeter Ujfalusi6-553/+0
The new omap-twl4030 handles the boards used the following drivers: igep0020, omap3beagle, omap3evm and overo. Remove these drivers since they are mostly identical and we already have drop in replacement for all of them. Note: Earlier patch added the needed code for the board files to retain the audio support for boards I can identify that used one of the removed drivers. If I missed something please take a look at for example: arch/arm/mach-omap2/board-omap3beagle.c on how add support for omap-twl4030 audio. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-15ASoC: omap-twl4030: Simple machine driver for TI SoC with twl4030 codecPeter Ujfalusi3-0/+203
Machine driver to handle simple devices using twl4030 as audio codec. The driver supports the following boards: - Beagleboard or Devkit8000 - Gumstix Overo or CompuLab CM-T35/CM-T3730 - IGEP v2 - OMAP3EVM All of these boards can be switched to use this driver since their setup is identical. Devicetree support for the omap-twl4030 machine driver also implemented. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-07ASoC: omap-mcbsp: Fix 6pin mux configurationPeter Ujfalusi1-1/+1
The check for the mux_signal callback was wrong which prevents us to configure the 6pin port's FSR/CLKR signal mux. Reported-by: CF Adad <cfadad@rocketmail.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org (3.4+)
2012-08-03ASoC: omap-abe-twl6040: Add device tree supportPeter Ujfalusi1-30/+115
When the board boots with device tree the driver will receive the name of the card, DAPM routing map, phandle for the audio components described in the dts file, mclk speed, and the possibility of detecting the jack detection. The card will be set up based on this information. Since the routing is provided via DT we can mark the card fully routed so core can take care of disconnecting the unused pins. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-03ASoC: omap-mcpdm: Convert to use devm_*Peter Ujfalusi1-39/+13
Switch to use devm_* te make the probe/remove code more cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-26ASoC: omap: Add missing modules aliases to get sound working on omap devicesGuillaume Gardet2-0/+2
This patch add missing modules aliases to get sound working on omap devices. Tested on Beagleboard xM rev. B. This patch is against 3.5-rc6 vanilla. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Signed-off-by: Mans Rullgard <mans.rullgard@linaro.org> From 18b1ba8becc3dd256bdaad2d825f46b551debda3 Mon Sep 17 00:00:00 2001 From: Guillaume GARDET <guillaume.gardet@oliseo.fr> Date: Tue, 10 Jul 2012 13:47:16 +0200 Subject: [PATCH] Add missing modules aliases to fix audio on omap devices Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-14 05:03:14 +0000