summaryrefslogtreecommitdiffstats
path: root/sound/soc/omap
AgeCommit message (Collapse)AuthorFilesLines
2011-01-12Merge branch 'for-2.6.38' of ↵Takashi Iwai2-3/+36
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2011-01-05ASoC: Remove needless inclusion of tlv320aic3x.h from machine driversJarkko Nikula2-2/+0
After multi-component conversion these machine drivers don't actually need anything from sound/soc/codecs/tlv320aic3x.h so don't include it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-23ASoC: mcbsp: Add McBSP support for OMAP4Jorge Eduardo Candelaria2-3/+36
This patch adds McBSP support for the OMAP4 CPU Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-17Merge branch 'for-2.6.38' of ↵Takashi Iwai1-4/+39
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2010-12-14ASoC: sdp4430: Add Jack supportJorge Eduardo Candelaria1-0/+32
Use jack framework to enable detection for the headset microphone and stereo output in the sdp4430. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: David Anders <x0132446@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-09ASoC: sdp4430: Enable FM stereo pinsJorge Eduardo Candelaria1-4/+7
Add FM stereo pins to the machine driver and add them as a dapm widget. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-03Merge branch 'for-2.6.37' into for-2.6.38Mark Brown1-1/+1
2010-12-02ASoC: omap: N810: Don't select CONFIG_OMAP_MUX but make it as dependencyJarkko Nikula1-1/+1
Not all omap boards use kernel based pin multiplexing so CONFIG_SND_OMAP_SOC_N810 should not select it by default as it can make harm to other boards in multi-board kernels. Therefore put CONFIG_OMAP_MUX as a dependency to N810 ASoC machine driver. Thanks to Tony Lindgren <tony@atomide.com> for noticing. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-25Merge branch 'for-2.6.37' into for-2.6.38Mark Brown1-3/+8
2010-11-25ASoC: Fix resource reclaim for osk5912Axel Lin1-3/+8
In current implementation, there are resources leak in the error path. This patch properly reclaims the allocated resources in the error path. Also adds a missing clk_put in osk_soc_exit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-24Merge branch 'for-2.6.37' into for-2.6.38Mark Brown2-0/+9
2010-11-24Merge branch 'fix/asoc' of ↵Mark Brown1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.37
2010-11-24ASoC: Return proper error for omap3pandora_soc_initAxel Lin1-0/+1
Return PTR_ERR(omap3pandora_dac_reg) instead of 0 if regulator_get failed. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: Do not include soc-dapm.hJarkko Nikula13-13/+0
There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-06ASoC: Decouple DAPM from CODECsLiam Girdwood9-150/+166
Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-03ASoC: OMAP: fix OMAP1 compilation problemJanusz Krzysztofik1-0/+8
In the new code introduced with commit cf4c87abe238ec17cd0255b4e21abd949d7f811e, "OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c", the way omap1 build is supposed to bypass omap2 specific functionality doesn't optimize out all omap2 specific stuff. This breaks linking phase for omap1 machines, giving "undefined reference to `omap2_mcbsp1_mux_clkr_src'" and "undefined reference to `omap2_mcbsp1_mux_fsr_src'" errors. Fix it. Created and tested against linux-2.6.37-rc1. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-25Merge branch 'omap-for-linus' of ↵Linus Torvalds2-91/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
2010-10-12ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.hAnand Gadiyar1-1/+0
Commit 346a5c890 (OMAP: control: move plat-omap/control.h to mach-omap2/control.h) in the linux-omap tree removed plat/control.h and most of its callers. This one slipped through - breaking the build as below when CONFIG_SND_OMAP_SOC_MCPDM is defined. Fix this. CC sound/soc/omap/omap-mcpdm.o sound/soc/omap/omap-mcpdm.c:35: fatal error: plat/control.h: No such file or directory compilation terminated. make[3]: *** [sound/soc/omap/omap-mcpdm.o] Error 1 make[2]: *** [sound/soc/omap] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Paul Walmsley <paul@pwsan.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-10ASoC: omap: Remove needless prints from machine driversJarkko Nikula8-24/+8
It is currently completely normal to execute these machine drivers code on different boards if the kernel includes support for multiple boards so no error message should be printed if the machine_is_xxx does not match with the machine driver. Therefore remove these pr_err and pr_debug prints in those cases. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-08OMAP: McBSP: implement functional clock switching via clock frameworkPaul Walmsley1-56/+13
Previously the OMAP McBSP ASoC driver implemented CLKS switching by using omap_ctrl_{read,write}l() directly. This is against policy; the OMAP System Control Module functions are not intended to be exported to drivers. These symbols are no longer exported, so as a result, the OMAP McBSP ASoC driver does not build as a module. Resolve the CLKS clock changing portion of this problem by creating a clock parent changing function that lives in arch/arm/mach-omap2/mcbsp.c, and modify the ASoC driver to use it. Due to the unfortunate way that McBSP support is implemented in ASoC and the OMAP tree, this symbol must be exported for use by sound/soc/omap/omap-mcbsp.c. Going forward, the McBSP device driver should be moved from arch/arm/*omap* into drivers/ or sound/soc/* and the CPU DAI driver should be implemented as a platform_driver as many other ASoC CPU DAI drivers are. These two steps should resolve many of the layering problems, which will rapidly reappear during a McBSP hwmod/PM runtime conversions. Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-08OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.cPaul Walmsley1-35/+17
The OMAP ASoC McBSP code implemented CLKR and FSR signal muxing via direct System Control Module writes on OMAP2+. This required the omap_ctrl_{read,write}l() functions to be exported, which is against policy: the only code that should call those functions directly is OMAP core code, not device drivers. omap_ctrl_{read,write}*() are no longer exported, so the driver no longer builds as a module. Fix the pinmuxing part of the problem by removing calls to omap_ctrl_{read,write}l() from the OMAP ASoC McBSP code and implementing signal muxing functions in arch/arm/mach-omap2/mcbsp.c. Due to the unfortunate way that McBSP support is implemented in ASoC and the OMAP tree, these symbols must be exported for use by sound/soc/omap/omap-mcbsp.c. Going forward, the McBSP device driver should be moved from arch/arm/*omap* into drivers/ or sound/soc/*, and the CPU DAI driver should be implemented as a platform_driver as many other ASoC CPU DAI drivers are. These two steps should resolve many of the layering problems, which will rapidly reappear during a McBSP hwmod/PM runtime conversion. Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-08OMAP: McBSP: Fix static function warningG, Manjunath Kondaiah1-1/+1
This patch fixes sparse warning due non declaration of static function sound/soc/omap/omap-mcbsp.c:783:5: warning: symbol 'omap_mcbsp_st_info_volsw' was not declared. Should it be static? Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Cc: alsa-devel@alsa-project.org Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Nishanth Menon <nm@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-23Merge remote branch 'broonie-asoc/for-2.6.37' into for-2.6.37Liam Girdwood1-1/+1
2010-08-23ASoC: omap: rx51: Use gpio_set_value_cansleep for speaker amp controlJarkko Nikula1-2/+2
Speaker amplifier is controlled by TWL4030 GPIO which may sleep. Therefore use gpio_set_value_cansleep to get rid of runtime warning that is introduced after the commit 9c4ba94 and to get a stack trace if ever executing this code in atomic context. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-19ASoC: Use a more adequate name for the CX20442 codec DAIJanusz Krzysztofik1-1/+1
In the process of unification of codec DAI names while implementing multi-component, the CX20442 codec DAI has been renamed to "cx20442-hifi". This new name seems not adequate for a 8kHz voice codec. Use a better name, "cx20442-voice", as suggested by Liam Girdwood. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-12ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood22-473/+349
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02ASoC: omap-mcbsp: Remove period size constraint in THRESHOLD modePeter Ujfalusi1-39/+4
The use of sDMA packet mode in THRESHOLD mode removes the restriction on the period size. With the extended THRESHOLD mode user space can ask for any period size it wishes, and the driver will configure the sDMA and McBSP FIFO accordingly. Replace the hw_rule for the period size with static constraint, which will make sure that the period size will be always even (to avoid prime period size, which could be possible in mono stream) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02ASoC: omap-mcbsp: Support for sDMA packet modePeter Ujfalusi1-6/+56
Utilize the sDMA controller's packet syncronization mode, when the McBSP FIFO is in use (by extending the THRESHOLD mode). When the sDMA is configured for packet mode, the sDMA frame size does not need to match with the McBSP threshold configuration. Uppon DMA request the sDMA will transfer packet size number of words, and still trigger interrupt on frame boundary. The patch extends the original THRESHOLD mode by doing the following: if (period_words <= max_threshold) Current THRESHOLD mode configuration Otherwise (period_words > max_threshold) McBSP threshold = sDMA packet size sDMA frame size = period size With the extended THRESHOLD mode we can remove the constraint for the maximum period size, since if the period size is bigger than the maximum allowed threshold, than the driver will switch to packet mode, and picks the best (biggest) threshold value, which can divide evenly the period size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02ASoC: omap-mcbsp: Code cleanup in omap_mcbsp_dai_hw_paramsPeter Ujfalusi1-9/+12
To make the code a bit more readable, change the indexed references to the omap_mcbsp_dai_dma_params elements with pointer. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02ASoC: omap-mcbsp: Restructure the code within omap_mcbsp_dai_hw_paramsPeter Ujfalusi1-14/+11
In preparation for the extended threshold mode (sDMA packet mode support), the code need to be restructured. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-23ASoC: RX-51: Add basic jack detectionJarkko Nikula1-1/+28
This patch adds GPIO jack detection to Nokia N900/RX-51. At the moment only SND_JACK_VIDEOOUT type is reported. More types could be reported after getting more audio features supported and necessary drivers integrated for implementing automated accessory detection. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-23ASoC: RX-51: Add Jack Function kcontrolJarkko Nikula1-0/+44
Nokia RX-51/N900 has multifunction 4-pole audio-video jack that can be used as headphone, headset or audio-video connector. This patch implements the control 'Jack Function' which is used to select the desired function. At the moment only TV-out without audio is supported. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-21ASoC: pandora: fix CLKX polarityGrazvydas Ignotas1-28/+8
After mass production started it was found that several boards exhibit noise problems during sound playback. After some investigation it was determined that CLKX polarity is set incorrectly, and even if most boards can tolerate the wrong setting, there are some that don't. Fix polarity setup in the board file. As the clock settings for input and output now match, merge in and out functions and structures to simplify code. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-03ASoC: omap-mcbsp: Place correct constraints for streamsPeter Ujfalusi1-21/+77
OMAP McBSP FIFO is word structured: McBSP2 has 1024 + 256 = 1280 word long buffer, McBSP1,3,4,5 has 128 word long buffer This means, that the size of the FIFO depends on the McBSP word size configuration. For example on McBSP3: 16bit samples: size is 128 * 2 = 256 bytes 32bit samples: size is 128 * 4 = 512 bytes It is simpler to place constraint for buffer and period based on channels. McBSP3 as example again (16 or 32 bit samples): 1 channel (mono): size is 128 frames (128 words) 2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words) 4 channels: size is 128 / 4 = 32 frames (4 * 32 words) Use the second method to place hw_rule on buffer size, and in threshold mode to period size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolsfonmicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-03ASoC: omap-mcbsp: Save, and use wlen for threshold configurationPeter Ujfalusi1-5/+9
Save the word length configuration of McBSP, and use that information to calculate, and configure the threshold in McBSP. Previously the calculation was only correct when the stream had 16bit audio. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolsfonmicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-20Merge branch 'topic/asoc' into for-linusTakashi Iwai8-284/+885
Conflicts: sound/soc/codecs/ad1938.c
2010-05-19ASoC: sdp4430 - add sdp4430 pcm ops to DAI.Liam Girdwood1-0/+1
Fix build warning about unused ops and add ops to the sdp4430 DAI link. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-19ASoC: SDP4430: Add support for Earphone speakerJorge Eduardo Candelaria1-0/+4
Enable earphone speaker in sdp4430 machine driver. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-19ASoC: SDP4430: Add sdp4430 machine driverMisael Lopez Cruz3-0/+239
Add ASoC support for TI SDP4430. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-14OMAP: McBSP: Add 32-bit mode supportSergey Lapin1-4/+24
This patchs should allow to use 32-bit samples on e.g. TLV320AIC3x codec, or others. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-06ASoC: omap: Add basic audio support for Nokia RX-51/N900Jarkko Nikula3-0/+306
This patch adds support for integrated stereo speakers and digital microphone found on Nokia RX-51 hardware. This is a cut down version based on Maemo kernel sources and earlier patchset by Eduardo Valentin et al. http://mailman.alsa-project.org/pipermail/alsa-devel/2009-October/022033.html Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Eduardo Valentin <eduardo.valentin@nokia.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-28ASoC: zoom2 - update DAPM pinsLiam Girdwood1-3/+0
Remove bogus twl4030 pins Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-28ASoC: pandora - update DAPM pinsLiam Girdwood1-2/+0
Remove bogus TWL4030 pins. Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-07Merge branch 'for-linus' of ↵Linus Torvalds3-12/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: mixart: range checking proc file ALSA: hda - Fix a wrong array range check in patch_realtek.c ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream ALSA: hda - Enable amplifiers on Acer Inspire 6530G ASoC: Only do WM8994 bias off transition from standby ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction ASoC: Support second DC servo readback method for wm_hubs ASoC: Avoid wraparound in wm_hubs DC servo correction ALSA: echoaudio - Eliminate use after free ALSA: i2c: cleanup: change parameter to pointer ALSA: hda - Add MSI blacklist for Aopen MZ915-M ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code ALSA: hda - Update document about MSI and interrupts ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981 ALSA: hda - Add missing printk argument in previous patch ASoC: Fix passing platform_data to ac97 bus users and fix a leak ALSA: hda - Fix ADC/MUX assignment of ALC269 codec ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo() ASoC: wm8994: playback => capture
2010-04-05Merge branch 'for-2.6.34' into for-2.6.35Mark Brown1-9/+8
Conflicts due to context changes next to the backported DMA data change: include/sound/soc.h
2010-04-05ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_streamDaniel Mack3-3/+8
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. [Note that this is a backported version for 2.6.34. Upstream commit is fd23b7dee] Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-02ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with ↵Janusz Krzysztofik1-9/+8
recent ALSA PCM code With recent (2.6.34) chnages in PCM handling, capture stopped working on my OMAP1510 based Amstrad Delta videophone. Using 2.6.34-rc2, I was able to correct the problem in 3 different ways: 1. reverting commit 7b3a177b0d4f92b3431b8dca777313a07533a710, 2. enabling additional jiffies check with echo 4 >/proc/asound/card0/pcm0c0/xrun_debug 3. applying the patch below. Since I wasn't able to reproduce the problem on my i686 PC, I guess the problem is probably machine specific. The patch reuses the method for software emulation of missing hardware pointer, already implemented for playback on OMAP1510. It's possible that event if a hardware pointer is available for capture on this machine, its behaviour may be not compatible with what upper layer expects. If you think the problem may be more general and should be solved differently, on a higher level, I can try to work more on it if you give me a hint. If the patch gets accepted, I suggest it goes as a fix in the current release cycle. Created and tested against linux-2.6.34-rc2. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2-0/+2
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-19ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_streamDaniel Mack3-3/+8
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19ASoC: omap-mcbsp: Add support for Left Justified formatPeter Ujfalusi1-1/+11
Basic support for Left Justified coding for OMAP McBSP. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 20:13:20 +0000