summaryrefslogtreecommitdiffstats
path: root/sound/soc/meson
AgeCommit message (Collapse)AuthorFilesLines
2019-04-05ASoC: meson: axg-tdmout: add g12a supportJerome Brunet1-0/+13
The axg tdmout driver just need a different skew offset to operate correctly on the g12a SoC family. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05ASoC: meson: axg-tdm-formatter: rework quirks settingsJerome Brunet4-14/+35
The g12a tdmout requires a different signal skew offset than the axg. With this change, the skew offset is added as a parameter of the tdm formatters to prepare the addition of the g12a support. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05ASoC: meson: axg-frddr: add g12a supportJerome Brunet1-3/+140
On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05ASoC: meson: axg-toddr: add g12a supportJerome Brunet1-0/+53
Since the g12a SoC fifo can set the fifo initial start address, we must make sure to actually reset the write pointer to this address when starting a capture. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05ASoC: meson: axg-fifo: add g12a supportJerome Brunet2-3/+33
The g12a fifos gained the ability to set the initial address of the pointer within the buffer, instead of defaulting to the buffer start address. It is not very useful to us (yet) but we need to put a copy the buffer start address in the related register for the fifo to work properly on the g12a SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06ASoC: meson: Drop superfluous PCM preallocation error checksTakashi Iwai1-3/+4
snd_pcm_lib_preallocate_pages() and co always succeed, so the error check is simply redundant. Drop it. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-13ASoC: meson: fix do_div warning in spdifinJerome Brunet1-2/+2
Even if this spdif input driver is only supposed to be used on 64bits platform, there is possible problem with 32bits and do_div, as reported by the kbuild robot. Just fix it. Fixes: 5ce5658375e6 ("ASoC: meson: add axg spdif input") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13ASoC: meson: add axg spdif inputJerome Brunet3-1/+531
Add support for the spdif input decoder of the axg SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13ASoC: meson: axg-toddr: add support for spdifin backendJerome Brunet2-11/+7
add IEC958_SUBFRAME_LE to the list of format accepted by the fifo frontend. As opposed to what was initially noted in the toddr dai driver, the spdifin does not place the msb at bit 28, it just output a whole spdif subframe. Placing the msb at bit 28 in the toddr driver just filters out the parity, user, channel status and validity bits. It is better to just provide the whole spdif subframe to the userspace and let the iec958 plugin deal with it. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: add for_each_card_prelinks() macroKuninori Morimoto1-2/+1
To be more readable code, this patch adds new for_each_card_prelinks() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-04ASoC: add for_each_rtd_codec_dai() macroKuninori Morimoto1-4/+2
ALSA SoC snd_soc_pcm_runtime has snd_soc_dai array for codec_dai. To be more readable code, this patch adds new for_each_rtd_codec_dai() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-04ASoC: add for_each_link_codecs() macroKuninori Morimoto1-2/+3
ALSA SoC snd_soc_dai_link has snd_soc_dai_link_component array for codecs. To be more readable code, this patch adds new for_each_link_codecs() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-29ASoC: meson: add axg pdm inputJerome Brunet3-0/+665
Add pdm input driver for the device found on the amlogic AXG SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-28ASoC: meson: axg-tdm: restrict formats depending on slot widthJerome Brunet1-21/+29
Restrict the formats possible on the TDM interface depending on the width of the TDM slot and let dpcm merging do the rest. Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-28ASoC: meson: axg-fifo: report interrupt request failureJerome Brunet1-0/+2
Return value of request_irq() was irgnored. Fix this and report the failure if any Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-28ASoC: meson: imply clock and reset controllersJerome Brunet1-0/+4
Add audio clock controller and ARB reset controller module implication for the device using them Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-28ASoC: Convert to using %pOFn instead of device_node.nameRob Herring1-1/+1
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-26ASoC: meson: align axg card driver with DT bindings documentationJerome Brunet1-6/+6
Drop amlogic prefix in front of the generic DT properties and change property "name" to "model". Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-26ASoC: meson: use IRQ_RETVAL in the fifo irq handlerJerome Brunet1-1/+1
Use IRQ_RETVAL instead of the open coded ternary operation. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-24ASoC: meson: axg-spdifout: select SND_PCM_IEC958Arnd Bergmann1-0/+1
When CONFIG_SND_PCM_IEC958 is disabled, we get a link error for the new driver: sound/soc/meson/axg-spdifout.o: In function `axg_spdifout_hw_params': axg-spdifout.c:(.text+0x650): undefined reference to `snd_pcm_create_iec958_consumer_hw_params' The other users use 'select', so we should do the same here. Fixes: 53eb4b7aaa04 ("ASoC: meson: add axg spdif output") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-20ASoC: meson: add axg sound card supportJerome Brunet3-0/+684
Add the axg sound card to handle the specifities of the axg audio sub system. This card is required to: * setup the dpcm links specific to the AXG (with a cpu sound dai) * handle the 4 lanes masks of the tdm interfaces * add the loopback link when a tdm pad interface has a playback stream * handle multi-codec links Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-20ASoC: meson: add tdm input driverJerome Brunet3-0/+239
Add Amlogic's axg TDM input driver which take the TDM signal of 4 input lanes and push the decoded audio samples to TODDR fifo Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-20ASoC: meson: add tdm output driverJerome Brunet3-0/+269
Add Amlogic's axg tdm output driver which pulls data from FRDDR fifo and produce the TDM signals for 4 output lanes. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-20ASoC: meson: add tdm interface driverJerome Brunet4-0/+552
Add Amlogic's axg TDM interface driver. This driver manages the format and clocks provided on the pads. On this SoC, each stream direction provides 4 serial lanes. This makes a maximum of 8 channels in i2s modes and 128 channels in DSP modes. While each lanes operate on the same slot number (same bit clock), they may have different TDM masks. This requires to provide a function to let the card set the 4 masks, in lieu of the usual set_tdm_slots() callback of the dai driver. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-20ASoC: meson: add tdm formatter base driverJerome Brunet5-0/+500
Add Amlogic's axg TDM core driver. On this SoC, tdm is bit more complex than usual, mainly because the different TDM input decoders can be attached to any of TDM pad interface, including the output pads. For the this, TDM on this SoC is modeled like this: - TDM interface provides the DAIs the codecs will be attached to. The main responsibility of this driver is to manage the pad format and the TDM clock rates. - TDM Formatters: These are the entities which are actually dealing with the TDM signal. TDMOUT produce a TDM signal from the audio sample provided by FRDDR using the clocks provided the TDM interface. TDMIN feeds TODDR with audio sample using the clocks and TDM signal provided by the TDM Interface. - TDM Streams: This provides the link between 1 DAI stream of the TDM interface and one (or more) TDM formatters. This driver provides the TDM formatter and TDM stream operations. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-18ASoC: meson: add axg spdif outputJerome Brunet3-0/+465
Add support for the spdif output serializer of the axg SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-18ASoC: meson: add axg toddr driverJerome Brunet3-0/+208
Add the capture memory interface of Amlogic's axg SoCs. TDM, SPDIF or PDM input devices place audio samples inside this FIFO. The FIFO content is then pushed to DDR Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-18ASoC: meson: add axg frddr driverJerome Brunet3-0/+150
Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-18ASoC: meson: add axg fifo base driverJerome Brunet4-0/+434
Amlogic's axg SoCs have two types of fifos which are the memory interfaces of the audio subsystem. FRDDR provides the playback interface while TODDR provides the capture interface. The way these fifos operate is very similar. Only a few settings are specific to each. They implement the same pcm driver here and the specifics of each will be dealt with the related DAI driver. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 10:55:51 +0000