summaryrefslogtreecommitdiffstats
path: root/sound/soc/intel/skylake
AgeCommit message (Collapse)AuthorFilesLines
2018-06-19ASoC: Intel: move SKL+ codec ACPI tables to common directoryPierre-Louis Bossart1-156/+6
No functionality change, just move to common tables to make it easier to deal with SOF and share the same machine drivers - as done previously for BYT/CHT/HSW/BDW. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-19ASoC: Intel: Skylake: cleanup before moving ACPI tablesPierre-Louis Bossart1-4/+4
There is no need to deal with DMICs if the DSP is not present and there is no ACPI machine ID found. Simplify before moving these ACPI tables to sound/soc/intel/common Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-19ASoC: Intel: broxton: reduce machine name for bxt_da7219_max98357aNaveen Manohar1-1/+1
Use truncated names in bxt id table and bxt_da7219_max98357a machine as platform device id table expects names to be less then 20chars. Signed-off-by: Naveen Manohar <naveen.m@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: topology: Give more data to clients via callbacksLiam Girdwood3-7/+10
Give topology clients more access to the topology data by passing index, pcm, link_config and dai_driver to clients. This allows clients to fully instantiate and track topology objects. The SOF driver is the first user of these new APIs and needs them to build component topology driver and FW objects. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-8/+12
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-01ASoC: topology: Move skl-tplg-interface.h to uapiGuenter Roeck5-250/+4
skl-tplg-interface.h describes firmware format details for Skylake topology files. It is part of the ABI and should reside in the uapi directory. While moving the file, also replace the license boilerplate with the SPDX License Identifier. No functional change. Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-01ASoC: topology: Improve backwards compatibility with v4 topology filesGuenter Roeck2-0/+243
Commit dc31e741db49 ("ASoC: topology: ABI - Add the types for BE DAI") introduced sound topology files version 5. Initially, this change made the topology code incompatible with v4 topology files. Backwards compatibility with v4 configuration files was subsequently added with commit 288b8da7e992 ("ASoC: topology: Support topology file of ABI v4"). Unfortunately, backwards compatibility was never fully implemented. First, the manifest size in (Skylake) v4 configuration files is set to 0, which causes manifest_new_ver() to bail out with error messages similar to the following. snd_soc_skl 0000:00:1f.3: ASoC: invalid manifest size snd_soc_skl 0000:00:1f.3: tplg component load failed-22 snd_soc_skl 0000:00:1f.3: Failed to init topology! snd_soc_skl 0000:00:1f.3: ASoC: failed to probe component -22 skl_n88l25_m98357a skl_n88l25_m98357a: ASoC: failed to instantiate card -22 skl_n88l25_m98357a: probe of skl_n88l25_m98357a failed with error -22 After this problem is fixed, the following error message is seen instead. snd_soc_skl 0000:00:1f.3: ASoC: old version of manifest snd_soc_skl 0000:00:1f.3: Invalid descriptor token 1093938482 snd_soc_skl 0000:00:1f.3: ASoC: failed to load widget media0_in cpr 0 snd_soc_skl 0000:00:1f.3: tPlg component load failed-22 This message is seen because backwards compatibility for loading widgets was never implemented. The lack of audio support when running the upstream kernel on recent Chromebooks has been reported in various forums, and can be traced back to this problem. Attempts to fix the problem, usually by providing v5 configuration files, were only partially successful. Let's implement backward compatibility properly to solve the problem for good. Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-21ASoC: intel: skylake: fix spelling mistake: "Homogenous" -> "Homogeneous"Colin Ian King1-2/+2
Trivial fix to spelling mistake in snprintf literal string Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-18ASoC: topology: Fix build errorsMark Brown3-12/+20
The two commits: 81e9b0a07889 ASoC: topology: Give more data to clients via callbacks 28aa6f7779f7 ASoC: topology: Add callback for DAPM route load/unload break the build so revert them. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17ASoC: topology: Give more data to clients via callbacksLiam Girdwood3-20/+12
Give topology clients more access to the topology data by passing index, pcm, link_config and dai_driver to clients. This allows clients to fully instantiate and track topology objects. The SOF driver is the first user of these new APIs and needs them to build component topology driver and FW objects. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17ASoC: Intel: Skylake: Reset stream to link mappingRakesh Ughreja1-0/+7
By default all the streams are mapped to all links after controller is reset which causes stream to be broadcast on all the links. This patch resets the stream-link mapping after controller reset. The stream is mapped later to the appropriate link as part of stream setup. Tested-by: Abhijeet Kumar <abhijeet.kumar@intel.com> Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17ASoC: Intel: Skylake: Reset DSP Pipelines in preparePardha Saradhi K1-4/+20
An application can choose to call .prepare function any number of times. In such scenarios, there is a need to reset the DSP pipeline. Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com> Signed-off-by: Divya Prakash <divya1.prakash@intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17ASoC: Intel: Skylake: Unify the fw ops for SKL and KBLPradeep Tewani3-36/+3
SKL and KBL driver used separate set of fw ops for library loading. However, with the unification of fw binary, use the common set of fw ops for both Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17ASoC: Intel: Skylake: Reset DSP pipe in skl_pcm_hw_freeDivya Prakash1-0/+12
Currently during destroy pipeline the gateway is disabled before DMA completion. This leads to improper draining of data and subsequently causing issues on HD-Audio DMA. Hence added a new pipe reset IPC in skl_pcm_hw_free in which the Gateway Enable(GEN bit) is reset to 0 after DMA completion in skl_pcm_trigger. Signed-off-by: Divya Prakash <divya1.prakash@intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-13ASoC: Intel: Skylake: Disable clock and power gating during FW/LIB downloadSanyog Kale5-2/+46
In order to achieve better DMA performance and reduce download time for firmware and library, it is recommended to disable dynamic clock and power gating. In some scenarios, DMA may wait to accumulate more data and last chunk of data never gets completed if dynamic clock and power gating is kept enabled. This patch adds support to disable/enable dynamic clock and power gating and use it during firmware and library download. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-05ASoC: Intel: Skylake: Fix typoAbhijeet Kumar1-1/+1
Spelling mistake in state. So fixing it. Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-01Merge branch 'topic/component-platform' of ↵Mark Brown5-51/+35
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2018-03-01ASoC: Intel: Skylake: Find module id from UUID for bind paramsSriram Periyasamy3-2/+96
Module id is a property of firmware manifest and can vary across platforms. So use the uuid to find module id dynamically for bind params like kpb post bind params. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-01ASoC: Intel: Skylake: Add BE DAI for WoV usecasePawse, GuruprasadX1-0/+11
Currently DMIC capture and WoV usecase uses same BE DAI but operate at different sampling rates, this results in config mismatch for WoV when DMIC is already running in parallel. DMIC has two slots which can operate with some constraints, so add BE DAI for DMICvoice pin which can used for WoV usecases to capture 4ch, 16KHz, 16bit data. Signed-off-by: Pawse, GuruprasadX <guruprasadx.pawse@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-01ASoC: Intel: Skylake: Refine skl widget type checkGuneshwor Singh1-10/+14
The current check is not effective when all the widgets of a card are involved since other widgets also can be of same type. So, make widget type check more stringent by checking dev pointer additionally. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-16ASoC: Intel: Add Kabylake Dialog+Maxim machine driver entryNaveen Manohar1-0/+13
Adds Kabylake kbl_da7219_max98357a_i2s machine driver entry into machine table Signed-off-by: Naveen Manohar <naveen.m@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: intel: skylake: replace platform to componentKuninori Morimoto5-50/+34
Now platform can be replaced to component, let's do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: "Kp, Jeeja" <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: Intel: Skylake: make function skl_clk_round_rate staticColin Ian King1-2/+2
The function skl_clk_round_rate is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: sound/soc/intel/skylake/skl-ssp-clk.c:250:6: warning: symbol 'skl_clk_round_rate' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-26ASoC: Intel: Skylake: Add extended I2S config blob support in Clock driverSriram Periyasamy2-12/+60
Extended I2S config blob supports multiple mclk dividers in NHLT blob. This patch detects whether the I2S blob is legacy or extended based on the signature value and chooses the mclk source and divider accordingly. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-26ASoC: Intel: Skylake: Add ssp clock driverSriram Periyasamy5-0/+479
For certain platforms, it is required to start the clocks (mclk/sclk/fs) before the stream start. Example: for few chrome systems, codec needs the mclk/sclk to be enabled early for a successful clock synchronization and for few IVI platforms, clock need to be enabled at boot and should be ON always. Add the required structures and create set_dma_control ipc to enable or disable the clock. To enable sclk without fs, mclk ipc structure is used, else sclkfs ipc structure is used. Clock prepare/unprepare are used to enable/disable the clock as the IPC will be sent in non-atomic context. The clk set_dma_control IPC structures are populated during the set_rate callback and IPC is sent to enable the clock during prepare callback. This patch creates virtual clock driver, which allows the machine driver to use the clock interface to send IPCs to DSP to enable/disable the clocks. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-17ASoC: Intel: remove second duplicated assignment to pointer 'res'Colin Ian King1-1/+0
The second assignment to res is identical to the previous assignment so it is redundant and can be removed. Cleans up clang warning: sound/soc/intel/skylake/skl-topology.c:191:25: warning: Value stored to 'res' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12Merge branch 'acpi-gpio' of ↵Mark Brown2-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into asoc-intel
2018-01-08Merge branch 'fix/intel' of ↵Mark Brown7-39/+71
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2018-01-03ASoC: skl: Fix kernel warning due to zero NHTL entryTakashi Iwai1-1/+2
I got the following kernel warning when loading snd-soc-skl module on Dell Latitude 7270 laptop: memremap attempted on mixed range 0x0000000000000000 size: 0x0 WARNING: CPU: 0 PID: 484 at kernel/memremap.c:98 memremap+0x8a/0x180 Call Trace: skl_nhlt_init+0x82/0xf0 [snd_soc_skl] skl_probe+0x2ee/0x7c0 [snd_soc_skl] .... It seems that the machine doesn't support the SKL DSP gives the empty NHLT entry, and it triggers the warning. For avoiding it, let do the zero check before calling memremap(). Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03ASoC: Intel: Skylake: Disable clock gating during firmware and library downloadPardha Saradhi K2-0/+8
During firmware and library download, sometimes it is observed that firmware and library download is timed-out resulting into probe failure. This patch disables dynamic clock gating while firmware and library download. Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-20ASoC: Intel: Skylake: Ensure dai and dailink registration happens in sequence.Pankaj Bharadiya2-18/+39
Platform registration happens in probe work handler whereas machine device is registered during skl_probe. This sometimes results in cpu dais not found if the work handler is sufficiently delayed due to system load, even with deferred probe of machine driver. So move machine device registration after registering platform. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-20ASoC: Intel: Skylake: Request IRQ late only after all context are initializedSubhransu S. Prusty5-7/+14
Sometimes during boot, panic is observed at sst_dsp_shim_read_unlocked(). This happens when interrupt occurs before the context is initialized. So move the irq initialization only after the context is initialized completely. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Pawse, GuruprasadX <guruprasadx.pawse@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-11ASoC: Intel: Skylake: Re-order some code to silence a warningDan Carpenter1-2/+2
I get a Smatch warning here: sound/soc/intel/skylake/skl-nhlt.c:335 skl_get_ssp_clks() error: testing array offset 'j' after use. The code is harmless, but the checker is right that we should swap these two conditions so we verify that the offset is within bounds before we use it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-08ASoC: Intel: Change kern log level to avoid unwanted messagesNaveen Manohar1-1/+1
patch suppresses the warning message "control load not supported" as this is a debug information to help debug issues in topology. Signed-off-by: Naveen Manohar <naveen.m@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Do not check dev_type for dmic link typeGuneshwor Singh1-5/+10
Some BIOS have inconsistent dev_type value for DMIC link type. Since there is only one device type for DMIC link type, remove device type check if link type is NHLT_LINK_DMIC. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Configure DSP clock sourcePradeep Tewani3-0/+27
DSP clock source is configured by sending the A-State table to the FW. Add the large config set IPC to configure the desired clock source Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Parse vendor tokens to build A-State tablePradeep Tewani2-1/+60
A-State table is a power management table which allows the driver to configure the DSP clock source corresponding to various load thresholds. The table contains upto 3 A-State entries. The patch adds and parses the corresponding A-State tokens to build the table. Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-05ASoC: don't use rtd->codec on intel/skylakeKuninori Morimoto1-2/+2
rtd->codec will be removed soon. rtd->codec = rtd->codec_dai->codec, thus, we can use rtd->codec_dai->component instead of it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-04ASoC: Intel: Skylake: Fix descriptions for exported function argsGuneshwor Singh1-2/+4
Fix a few incorrect descriptions for arguments in exported functions. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-04ASoC: Intel: Skylake: Make local functions staticGuneshwor Singh2-3/+3
Some functions are local to the source and do not need to be in global scope, so make them static. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29ASoC: Intel: Skylake: Parse nhlt and register clock deviceSriram Periyasamy5-0/+395
When NHLT endpoint is present for a SSP then we create clock for that SSP. MCLK is consistent across endpoints and configuration for an SSP, so query only for first endpoint for an SSP. For SCLK/SCLKFS, the best fit is queried from the NHLT configurations which matches the clock rate requested. Best fit is decided based on below: 1. If rate matches with multiple configurations, then the first configuration is selected. 2. If for a selected fs and bits_per_sample, there are multiple endpoint configuration match, then the configuration with max number of channels is selected. So, the user has to set the rate which fits max number of channels So we create a platform device and pass clock information parsed as platform data. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown6-61/+137
2017-11-10Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown5-14/+25
2017-11-10Merge tag 'asoc-fix-v4.14-rc6' into asoc-linusMark Brown1-1/+1
ASoC: Fixes for v4.14 I've been quite lax in sending these due to conference season but here's a fairly large collection of ASoC updates. The one thing that's not device specific is Takashi's fix for races between delayed work and PCM destruction, otherwise everything is specific to an individual device. # gpg: Signature made Thu 26 Oct 2017 15:11:23 BST # gpg: using RSA key ADE668AA675718B59FE29FEA24D68B725D5487D0 # gpg: issuer "broonie@kernel.org" # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" [unknown] # gpg: aka "Mark Brown <broonie@debian.org>" [unknown] # gpg: aka "Mark Brown <broonie@kernel.org>" [unknown] # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" [unknown] # gpg: aka "Mark Brown <broonie@linaro.org>" [unknown] # gpg: aka "Mark Brown <Mark.Brown@linaro.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 3F25 68AA C269 98F9 E813 A1C5 C3F4 36CA 30F5 D8EB # Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2 9FEA 24D6 8B72 5D54 87D0
2017-11-08ASoC: Intel: Skylake: Add dynamic module id supportSriram Periyasamy1-2/+21
Module id is a property of firmware manifest and can vary between platforms so use the uuid instead of module id for pins. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Optimize UUID handling to fill pin infoSriram Periyasamy1-23/+23
Modify skl_tplg_get_uuid() to copy just UUID rather than only for module UUID and skl_tplg_fill_pin() to fill the pin info which can include UUID token also. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Check for NHLT ACPI header signaturePankaj Bharadiya1-0/+9
In certain buggy BIOS acpi_evaluate_dsm() may not return the correct NHLT table, so check the NHLT table header signature before accessing it. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Fix uuid_module memory leak in failure casePankaj Bharadiya1-4/+11
In the loop that adds the uuid_module to the uuid_list list, allocated memory is not properly freed in the error path free uuid_list whenever any of the memory allocation in the loop fails to avoid memory leak. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Fix potential NULL pointer dereferencePankaj Bharadiya1-1/+2
Pointer 'mconfig' returned from call to skl_tplg_fe_get_cpr_module() can be NULL. So check for the valid pointer before dereferencing. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Add channel map in updown mixer module IPCGuneshwor Singh2-0/+2
DSP expects channel map to be sent in the IPC for updown mixer module. So add ch_map info in updown mixer module config. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-04 01:13:48 +0000