summaryrefslogtreecommitdiffstats
path: root/sound/soc/intel/skylake/skl-messages.c
AgeCommit message (Collapse)AuthorFilesLines
2021-08-23ASoC: Intel: Skylake: Properly configure modules with generic extensionPawel Harlozinski1-36/+15
Make use of struct skl_base_cfg_ext and its format setter to configure modules which are described with said structure. Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com> Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com> Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-11-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Support modules with generic extensionSzymon Mielczarek1-13/+69
Some DSP modules require, besides the module base configuration, a generic extension containing audio format for all module's pins that are in use. Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com> Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-10-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Support multiple format configsKareem Shaik1-10/+9
A module can have two kinds of set params, as per topology requirements. For example, one pre-init and one post-init. But currently, there is support for just one type, as the format_config. This patch extends the format_configs to 4, so as to be able to support pre-init, post-init and post-bind type of set params, for the same module, simultaneously. Signed-off-by: Kareem Shaik <kareem.m.shaik@intel.com> Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-9-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Fix module configuration for KPB and MIXERCezary Rojewski1-2/+9
KeyPhrasebuffer, Mixin and Mixout modules configuration is described by firmware's basic module configuration structure. There are no extended parameters required. Update functions taking part in building INIT_INSTANCE IPC payload to reflect that. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-6-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-27ASoC: Intel: Skylake: Print module type instead of idAmadeusz Sławiński1-2/+3
When we are printing module params, we were actually printing module id instead of type, but debug message was saying that number we get is type. So print module type, as it is useful when debugging paths, but also keep printing module id, as it is used in all other logs. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com> Link: https://lore.kernel.org/r/20190827141712.21015-5-amadeuszx.slawinski@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-08Merge branch 'topic/hda-bus-ops-cleanup' of ↵Mark Brown1-13/+2
https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.4
2019-08-08ASoC: Intel: Skylake: large_config_get overhaulCezary Rojewski1-1/+2
LARGE_CONFIG_GET is mainly used to retrieve requested module parameters but it may also carry TX payload with them. Update its implementation to account for both TX and RX data. First reply.header carries total payload size within data_off_sizefield. Make use of reply.header to realloc returned buffer with correct size. Failure of IPC request is permissive - error-payload may be returned, an informative data why GET for given param failed - and thus function should not collapse before entire processing is finished. Caller is responsible for checking returned payload and bytes parameters. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190808181549.12521-3-cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-08ALSA: hda: Remove page allocation redirectionTakashi Iwai1-13/+2
The HD-audio core allocates and releases pages via driver's specific dma_alloc_pages and dma_free_pages ops defined in bus->io_ops. This was because some platforms require the uncached pages and the handling of page flags had to be done locally in the driver code. Since the recent change in ALSA core memory allocator, we can simply pass SNDRV_DMA_TYPE_DEV_UC for the uncached pages, and the only difference became about this type to be passed to the core allocator. That is, it's good time for cleaning up the mess. This patch changes the allocation code in HD-audio core to call the core allocator directly so that we get rid of dma_alloc_pages and dma_free_pages io_ops. If a driver needs the uncached pages, it has to set bus->dma_type right after the bus initialization. This is merely a code refactoring and shouldn't bring any behavior changes. Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-24ASoC: Intel: Skylake: Make MCPS and CPS params obsoleteCezary Rojewski1-1/+1
As per FW Interface Modules Configuration, init instance IPC request requires base initial module configuration. This configuration structure is made of: - cpc (chunks per cycle) - ibs (input buffer size) - obs (output buffer size) - is_pages (memory pages required) - audio_fmt (self explanatory) Skylake topology accepts following tokens: MCPS, CPS and CPC. All of these are directly connected. Moreover, assigning one of these allows to calculate the remaining two. In simplest scenario and assuming 1ms scheduling, following is true: CPS = CPC times 1000 MCPS = CPS times 1000 000 Note: these calculations vary depending on scenario and scheduling requirements. Given the current implementation, userspace is allowed to provide different values for all three causing informational chaos. On top of that, struct skl_base_cfg which represents base module configuration, incorrectly takes CPS param instead of CPC. This ambiguity may lead to user unintentionally providing improper values to DSP firmware and thus impacting module scheduling in unexpected fashion. Fix by making MCPS and CPS topology params obsolete and relying solely on CPC value. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190723145854.8527-7-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-24ASoC: Intel: Skylake: Do not disable FW notificationsAmadeusz Sławiński1-20/+0
As per FW team recommendation we should not disable notifications. By default, all notifications are enabled in DSP firmware. These notifications provide a vital information whenever an error occurs. Currently, driver disables them during boot sequences. By doing so, Skylake may silently ignore severe stream errors. Correct that by removing permissive code. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190723145854.8527-6-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-24ASoC: Intel: Skylake: Merge skl_sst and skl into skl_dev structCezary Rojewski1-117/+112
Skylake driver is divided into two modules: - snd_soc_skl - snd_soc_skl_ipc and nothing would be wrong if not for the fact that both cannot exist without one another. IPC module is not some kind of extension, as it is the case for snd_hda_ext_core which is separated from snd_hda_core - legacy hda interface. It's as much core Skylake module as snd_soc_skl is. Statement backed up by existence of circular dependency between this two. To eliminate said problem, struct skl_sst has been created. From that very momment, Skylake has been plagued by header errors (incomplete structs, unknown references etc.) whenever something new is to be added or code is cleaned up. As this design is being corrected, struct skl_sst is no longer needed, so combine it with struct skl. To avoid ambiguity when searching for skl stuff (struct skl *skl) it has also been renamed to skl_dev. No functional changes. Signed-off-by: Piotr Maziarz <piotrx.maziarz@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190723145854.8527-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-26Merge tag 'v5.2-rc6' into asoc-5.3Mark Brown1-9/+1
Linux 5.2-rc6
2019-06-25ASoC: Intel: Skylake: Reset pipeline before its deletionAmadeusz Sławiński1-7/+16
Before actual deletion, pipeline should enter RESET state. Currently, pipe skips this checkpoint and goes straight to the finish line. This is not the expected path by the FW, so correct it. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 13 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081205.608593891@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-13ASoC: Intel: Skylake: Add Cometlake PCI IDsEvan Green1-0/+16
Add PCI IDs for Intel CometLake platforms, which from a software point of view are extremely similar to Cannonlake platforms. Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-26ASoC: Intel: Skylake: enable S24_LE format supportJenny TC1-0/+1
To enable S24_LE format, sample_type in topology fw has to be set to 1. But sample_type defined in topology firmware configuration is not getting reflected in the dsp param. This patch sets sample_type in base config so that the sample type defined in the topology firmware is reflected in the dsp params. This issues was uncovered while debugging the S24_LE format which require the MSB byte in 32 bit word to be skipped. Setting sample_type in topology firmware to 1 helps to skip MSB byte word. Signed-off-by: Jenny TC <jenny.tc@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-03ASoC: Intel: Skylake: simplify boolean testsPierre-Louis Bossart1-1/+1
Detected with Coccinelle skl-messages.c:419:5-32: WARNING: Comparison to bool skl-pcm.c:1426:6-33: WARNING: Comparison to bool Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13ASoC: Intel: Skylake: Add CFL-S supportTakashi Iwai1-0/+8
It's with CNP, supposed to be equivalent with CNL entry. Keep the existing declaration style for now, at a later point we may transition and use PCI_DEVICE_DATA(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-28ALSA: hdac: Remove usage of struct hdac_ext_bus and use hdac_bus insteadRakesh Ughreja1-28/+22
This patch removes the hdac_ext_bus structure. The legacy and enhanced HDaudio capabilities can be handled in a backward-compatible way without separate definitions. Follow-up patches in this series handle the driver definition. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-01ASoC: topology: Move skl-tplg-interface.h to uapiGuenter Roeck1-1/+1
skl-tplg-interface.h describes firmware format details for Skylake topology files. It is part of the ABI and should reside in the uapi directory. While moving the file, also replace the license boilerplate with the SPDX License Identifier. No functional change. Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17ASoC: Intel: Skylake: Unify the fw ops for SKL and KBLPradeep Tewani1-1/+1
SKL and KBL driver used separate set of fw ops for library loading. However, with the unification of fw binary, use the common set of fw ops for both Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-13ASoC: Intel: Skylake: Disable clock and power gating during FW/LIB downloadSanyog Kale1-1/+6
In order to achieve better DMA performance and reduce download time for firmware and library, it is recommended to disable dynamic clock and power gating. In some scenarios, DMA may wait to accumulate more data and last chunk of data never gets completed if dynamic clock and power gating is kept enabled. This patch adds support to disable/enable dynamic clock and power gating and use it during firmware and library download. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-05ASoC: Intel: Skylake: Fix typoAbhijeet Kumar1-1/+1
Spelling mistake in state. So fixing it. Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-26ASoC: Intel: Skylake: Add ssp clock driverSriram Periyasamy1-0/+1
For certain platforms, it is required to start the clocks (mclk/sclk/fs) before the stream start. Example: for few chrome systems, codec needs the mclk/sclk to be enabled early for a successful clock synchronization and for few IVI platforms, clock need to be enabled at boot and should be ON always. Add the required structures and create set_dma_control ipc to enable or disable the clock. To enable sclk without fs, mclk ipc structure is used, else sclkfs ipc structure is used. Clock prepare/unprepare are used to enable/disable the clock as the IPC will be sent in non-atomic context. The clk set_dma_control IPC structures are populated during the set_rate callback and IPC is sent to enable the clock during prepare callback. This patch creates virtual clock driver, which allows the machine driver to use the clock interface to send IPCs to DSP to enable/disable the clocks. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08Merge branch 'fix/intel' of ↵Mark Brown1-8/+1
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2018-01-03ASoC: Intel: Skylake: Disable clock gating during firmware and library downloadPardha Saradhi K1-0/+4
During firmware and library download, sometimes it is observed that firmware and library download is timed-out resulting into probe failure. This patch disables dynamic clock gating while firmware and library download. Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Configure DSP clock sourcePradeep Tewani1-0/+18
DSP clock source is configured by sending the A-State table to the FW. Add the large config set IPC to configure the desired clock source Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown1-9/+14
2017-11-08ASoC: Intel: Skylake: Add channel map in updown mixer module IPCGuneshwor Singh1-0/+1
DSP expects channel map to be sent in the IPC for updown mixer module. So add ch_map info in updown mixer module config. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Fix updown mixer module formatGuneshwor Singh1-8/+0
DSP expects length of the coefficient for updown mixer module to be 8. So fix the max coefficient length and since we are using default values for coefficient select which is zero, we need not explicitly initialize it. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-09ASoC: Intel: Skylake: Modify skl_dsp_set_dma_control API argumentsJaikrishna Nemallapudi1-9/+14
Set dma control ipc can be used to set the M/N divider, enable the clks. It takes different payload for different configuration. So modify the skl_dsp_set_dma_control API to take the size and node_id as argument. Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-01ASoC: Intel: Skylake: Add IPC to configure the copier secondary pinsPradeep Tewani1-5/+48
Copier can support upto 4 output pins. However, only pin 0 is configured as a part of copier initialization. Configuring rest of pins require the separate IPC to be sent to fw. Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25ASoC: Intel: Skylake: Parse and update module config structureRamesh Babu1-19/+40
A dsp path and the modules in the path can support various pcm configurations. The list of supported pcm configurations from topology manifest would be stored and later selected runtime based on the hw pcm params. For legacy, module data is filled in the 0th index of resource and interface table. To accommodate both models, change the relevant structures and populate them by parsing newly defined tokens. This change is backward compatible with the existing model where driver computes the resources required by each dsp module. Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-23ASoC: Intel: Skylake: Fix uninitialized returnSubhransu S. Prusty1-1/+1
On failure to get dsp_ops, dsp_init returns error without assigning ret. ret is assigned in code path which will never be executed. Fix it. Fixes: f77d443c4c29 ("ASoC: Intel: Skylake: Fix to free resources for dsp_init failure" Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-23ASoC: Intel: Skylake: Fix to free resources for dsp_init failureSubhransu S. Prusty1-7/+19
unmap mmio and free memory resources if dsp_init fails. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-03ASoC: Intel: cnl: add dsp ops for cannonlakeGuneshwor Singh1-0/+9
Add cannonlake dsp support by adding its dsp_ops. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-03ASoC: Intel: Skylake: Use num_core to allocate instead of macroGuneshwor Singh1-1/+17
For different platforms, number of dsp cores can vary. So instead of creating array of size SKL_DSP_CORES_MAX, use num_core in dsp_ops() of the respective platform to allocate core usage counts and states. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-03ASoC: Intel: Skylake: Add num of cores in dsp opsDharageswari R1-0/+6
Number of dsp cores may differ for different platforms hence adding it in dsp ops. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-17ASoC: Intel: Skylake: fix type in debug messageColin Ian King1-1/+1
Trivial fix to typo in debug message, dst_instacne should be dst_instance Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-10ASoC: Intel: Skylake: Fix default dma_buffer_sizeSubhransu S. Prusty1-0/+8
If the dma_buffer_size is not defined in topology, fix it to 2ms default value to make backward compatible. Fixes: f6e6ab1d16ec ("ASoC: Intel: Skylake: Fix dma buffer size calculation") Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-19ASoC: Intel: Skylake: Fix dma buffer size calculationRamesh Babu1-4/+25
DMA buffer size for gateway copier will be calculated based on: For host DMA copier: Input buffer size (ibs) for output direction (playback) Output buffer size (obs) for input direction (capture) For link DMA copier: IBS for input direction (capture) OBS for output direction (playback) Update the driver to use the above. Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-06ASoC: Intel: Skylake: Add mic-select module typeDharageswari R1-0/+2
mic-select module is a DSP module, which is used to select one or more input channels. This patch adds mic-select module type. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26ASoC: Intel: Skylake: Register dsp_fw_ops for kabylakeSubhransu S. Prusty1-1/+1
For audio kabylake is same as skylake except the module load approach. This patch registers different dsp_fw_ops for kabylake and next patch adds the module load support for kabylake. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: Fix module state after unbind and deleteJeeja KP1-1/+1
When DSP module is unbound, the module state needs to be in INIT_DONE state instead of UNINT. Also the state needs to be set to UNINIT after module is deleted from DSP pipeline. So, set the module state to INIT_DONE after unbind and then UNINIT after module is deleted. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Remove get dsp_ops in cleanup routineG Kranthi1-6/+2
dsp ops is already set in init, so use this in cleanup routine instead of again retrieving it. Also constify struct skl_dsp_ops. Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Disable notifications at boot after DSP FW initG Kranthi1-1/+1
DSP firmware sends notification every 1ms, which is disabled in runtime suspend. But if a system has no runtime pm, we keep getting notification, so disable after FW init as well. Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Fix to delete DSP pipe after stopping pipeJeeja KP1-1/+1
DSP pipe needs to stopped before deleting the pipe. Currently check is for pipe state > STARTED, which is incorrect. So changed to include pipe state STARTED to stop the pipe if it started. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Add Geminlake IDsVinod Koul1-0/+7
Geminilake is next gen SoC, so add the IDs for Geminilake. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25ASoC: Intel: Skylake: Don't use dma I2S config structure in kernelGuruprasadX Pawse1-6/+3
I2S blob config structure can change between DSP copier module versions. We are not modifying these structures anyway and NHLT blobs specify them properly, so use the blob directly to send the dma_control ipc instead of using the predefined I2S blob config structure. Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-09ASoC: Intel: Skylake: Flush pending D0i3 request on suspendJayachandran B1-0/+27
While going to suspend, if we have any pending D0i3 work scheduled, flush that and force the DSP to goto D0i3 mode before going to suspend. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 00:37:26 +0000