summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
AgeCommit message (Collapse)AuthorFilesLines
2014-03-10Merge remote-tracking branches 'asoc/fix/88pm860', 'asoc/fix/omap' and ↵Mark Brown2-1/+4
'asoc/fix/si476x' into asoc-linus
2014-03-10ASoC: 88pm860: Fix IO setupLars-Peter Clausen1-0/+3
The 88pm860 is a MFD device and the CODEC driver is using the regmap struct of the parent device, hence automatic IO setup will not work and we need to manually call snd_soc_codec_set_cache_io(). The issue was introduced in commit f9ded3b2e7 ("ASoC: 88pm860x: Use regmap for I/O"). Fixes: f9ded3b2e7 ("ASoC: 88pm860x: Use regmap for I/O"). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-03-10ASoC: si476x: Fix IO setupLars-Peter Clausen1-1/+1
The si476x is a MFD device and the CODEC driver is using the regmap struct of the parent device, hence automatic IO setup will not work and we need to manually call snd_soc_codec_set_cache_io(). The issue was introduced commit d6173df35f ("ASoC: si476x: Remove custom register I/O implementation") Fixes: d6173df35f ("ASoC: si476x: Remove custom register I/O implementation") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-27Merge remote-tracking branch 'asoc/fix/wm8958' into asoc-linusMark Brown1-1/+1
2014-02-27Merge remote-tracking branches 'asoc/fix/da732x' and 'asoc/fix/sta32x' into ↵Mark Brown2-1/+13
asoc-linus
2014-02-27ASoC: sta32x: Fix wrong enum for limiter2 release rateTakashi Iwai1-1/+1
There is a typo in the Limiter2 Release Rate control, a wrong enum for Limiter1 is assigned. It must point to Limiter2. Spotted by a compile warning: In file included from sound/soc/codecs/sta32x.c:34:0: sound/soc/codecs/sta32x.c:223:29: warning: ‘sta32x_limiter2_release_rate_enum’ defined but not used [-Wunused-variable] static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum, ^ include/sound/soc.h:275:18: note: in definition of macro ‘SOC_ENUM_DOUBLE_DECL’ struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \ ^ sound/soc/codecs/sta32x.c:223:8: note: in expansion of macro ‘SOC_ENUM_SINGLE_DECL’ static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum, ^ Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: <stable@vger.kernel.org>
2014-02-26ASoC: da732x: Mark DC offset control registers volatileMark Brown1-0/+12
The driver reads from the DC offset control registers during callibration but since the registers are marked as volatile and there is a register cache the values will not be read from the hardware after the first reading rendering the callibration ineffective. It appears that the driver was originally written for the ASoC level register I/O code but converted to regmap prior to merge and this issue was missed during the conversion as the framework level volatile register functionality was not being used. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Cc: stable@vger.kernel.org
2014-02-25ASoC: wm8958-dsp: Fix firmware block loadingLars-Peter Clausen1-1/+1
The codec->control_data contains a pointer to the device's regmap struct. But wm8994_bulk_write() expects a pointer to the parent wm8998 device. The issue was introduced in commit d9a7666f ("ASoC: Remove ASoC-specific WM8994 I/O code"). Fixes: d9a7666f ("ASoC: Remove ASoC-specific WM8994 I/O code") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-23Merge remote-tracking branches 'asoc/fix/sta32x', 'asoc/fix/wm8400', ↵Mark Brown5-140/+151
'asoc/fix/wm8770', 'asoc/fix/wm8900' and 'asoc/fix/wm8994' into asoc-linus
2014-02-23Merge remote-tracking branches 'asoc/fix/ad1980' and 'asoc/fix/isabelle' ↵Mark Brown2-24/+32
into asoc-linus
2014-02-23ASoC: sta32x: Fix cache syncLars-Peter Clausen1-1/+1
codec->control_data contains a pointer to the regmap struct of the device, not to the device private data. Use snd_soc_codec_get_drvdata() instead. The issue was introduced in commit 29fdf4fbbe ("ASoC: sta32x: Convert to regmap"). Fixes: 29fdf4fbbe (ASoC: sta32x: Convert to regmap) Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-20ASoC: wm8400: Fix the wrong number of enum itemsTakashi Iwai1-14/+20
wm8400 codec driver has a few places wrongly defining the number of enum items. Use SOC_ENUM_SINGLE_DECL() macro and they are automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20ASoC: isabelle: Fix the wrong number of items in enum ctlsTakashi Iwai1-22/+30
isabelle codec driver has a few places wrongly defining the number of enum items. Use SOC_ENUM_SINGLE_DECL() macro and they are automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20ASoC: ad1980: Fix wrong number of items for capture sourceTakashi Iwai1-2/+2
The number of capture sources is 8, not 7. Use SOC_ENUM_DOUBLE_DECL() macro and it's automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20ASoC: wm8994: Fix the wrong number of enum itemsTakashi Iwai1-65/+70
wm8994 codec driver has a few places wrongly defining the number of enum items. Use SOC_ENUM_SINGLE_DECL() macro and they are automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20ASoC: wm8900: Fix the wrong number of enum itemsTakashi Iwai1-22/+22
wm8900 codec driver has a few places wrongly defining the number of enum items. Use SOC_ENUM_SINGLE_DECL() macro and they are automatically fixed. Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20ASoC: wm8770: Fix wrong number of enum itemsTakashi Iwai1-2/+2
wm8770 codec driver defines ain_enum with a wrong number of items. Use SOC_ENUM_DOUBLE_DECL() macro and it's automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-20ASoC: sta32x: Fix array access overflowTakashi Iwai1-36/+36
Preset EQ enum of sta32x codec driver declares too many number of items and it may lead to the access over the actual array size. Use SOC_ENUM_SINGLE_DECL() helper and it's automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-19Merge remote-tracking branch 'asoc/fix/wm8993' into asoc-linusMark Brown1-1/+0
2014-02-19Merge remote-tracking branches 'asoc/fix/blackfin', 'asoc/fix/da9055', ↵Mark Brown3-12/+21
'asoc/fix/davinci', 'asoc/fix/fsl', 'asoc/fix/fsl-esai', 'asoc/fix/max98090', 'asoc/fix/rt5640', 'asoc/fix/samsung' and 'asoc/fix/txx9aclc-ac97' into asoc-linus
2014-02-16ASoC: max98090: make REVISION_ID readableStephen Warren1-0/+1
The REVISION_ID register is not currently marked readable. snd_soc_read() refuses to read the register, and hence probe() fails. Fixes: d4807ad2c4c0 ("regmap: Check readable regs in _regmap_read") [exposed the bug, by checking for readability] Fixes: 685e42154dcf ("ASoC: Replace max98090 Device Driver") [left out this register from the readable list] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12ASoC: max98090: sync regcache on entering STANDBYDylan Reid1-10/+10
Sync regcache when entering STANDBY from OFF. ON isn't entered with OFF as the current state, so the registers were not being re-synced after suspend/resume. The 98088 and 98095 already call regcache_sync from STANDBY. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-10ASoC: da9055: Fix device registration of PMIC and CODEC devicesAdam Thomson1-2/+9
Currently the I2C device Ids conflict for the MFD and CODEC so cannot be both instantiated on one platform. This patch updates the Ids and names to make them unique from each other. It should be noted that the I2C addresses for both PMIC and CODEC are modifiable so instantiation of the two are kept as separate devices, rather than instantiating the CODEC from the MFD code. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-07ASoC: rt5640: Add ACPI ID for Intel BaytrailJarkko Nikula1-0/+1
Realtek RT5640 uses ACPI ID "10EC5640" for Intel Baytrail platforms. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-01-27Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fsl', ↵Mark Brown65-1486/+1779
'asoc/fix/omap', 'asoc/fix/samsung', 'asoc/fix/simple', 'asoc/fix/tlv320aic32x4' and 'asoc/fix/wm5100' into asoc-linus
2014-01-27ASoC: tlv320aic32x4: Fix MICPGA input configurationMarkus Pargmann2-4/+8
Currently the Negative Terminal Input Routing Configuration is only set when there is a special routing configuration. If we don't use one of the inputs IN1 or IN2 as negative terminal input, the PGA and recording does not work. This patch adds a route from CM1L/CM1R to the PGA as negative input by default. With this configuration the PGA can amplify all input signals and line-in/mic works again. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-27ASoC: tlv320aic32x4: Fix mono playbackMarkus Pargmann2-7/+12
Playback of a mono stream should output the same stream on both channels. At the moment only the left analog signal is valid, the right one is just noise. This patch maps the left digital channel onto both DACs when receiving a mono stream. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23ASoC: wm5100: Export wm5100_detectSachin Kamat1-0/+2
Export the symbol so that it is accessible to modules. Fixes the following error: ERROR: "wm5100_detect" [sound/soc/samsung/snd-soc-lowland.ko] undefined! Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-21ASoC: wm5110: Extend SYSCLK patch file for rev DCharles Keepax1-0/+48
Latest evaluation of the the device has given some patch file additions for improved performance. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-01-16Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/atmel', ↵Mark Brown23-460/+388
'asoc/topic/bcm2835', 'asoc/topic/docs', 'asoc/topic/fsl', 'asoc/topic/generic', 'asoc/topic/kirkwood', 'asoc/topic/mc13783', 'asoc/topic/mxs', 'asoc/topic/nuc900', 'asoc/topic/sai', 'asoc/topic/sh', 'asoc/topic/ssm2602', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl4030', 'asoc/topic/ux500', 'asoc/topic/width' and 'asoc/topic/x86' into for-tiwai
2014-01-16Merge remote-tracking branch 'asoc/topic/arizona' into for-tiwaiMark Brown1-0/+7
2014-01-16Merge remote-tracking branches 'asoc/fix/adau1701' and ↵Mark Brown2-3/+3
'asoc/fix/tlv320aic32x4' into for-tiwai
2014-01-15ASoC: tlv320aic32x4: Fix regmap range_minMarkus Pargmann1-1/+1
range_min is the lowest address in the virtual register range. This is the first register with address 0, not the first register of page 1. Currently all writes to page 1 are mapped to page 0, so the codec fails to operate. Fixes: 4d208ca429ad (ASoC: tlv320aic32x4: Convert to direct regmap API usage) Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org (v3.13 if the fix misses -final)
2014-01-13ASoC: codec: tlv320aic32x4: Fix regmap range configMarkus Pargmann1-1/+1
This codec driver fails to probe because it has a higher regmap range_max value than max_register. This patch sets the range_max to the max_register value as described in the for struct regmap_range_cfg: "@range_max: Address of the highest register in virtual range." Fixes: 4d208ca429ad (ASoC: tlv320aic32x4: Convert to direct regmap API usage) Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org (v3.13 if the fix misses -final)
2014-01-13ASoC: max9850: Use params_width() rather than memory formatMark Brown1-4/+4
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: max98095: Use params_width() rather than memory formatMark Brown1-3/+3
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: max98090: Use params_width() rather than memory formatMark Brown1-2/+2
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: max98088: Use params_width() rather than memory formatMark Brown1-3/+3
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: isabelle: Use params_width() rather than memory formatMark Brown1-3/+3
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: da9055: Use params_width() rather than memory formatMark Brown1-5/+5
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: da732x: Use params_width() rather than memory formatMark Brown1-5/+5
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: da7213: Use params_width() rather than memory formatMark Brown1-5/+5
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: da7210: Use params_width() rather than memory formatMark Brown1-5/+5
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: cs42l51: Use params_width() rather than memory formatMark Brown1-9/+5
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: alc5632: Use params_width() rather than memory formatMark Brown1-4/+4
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13ASoC: alc5623: Use params_width() rather than memory formatMark Brown1-5/+5
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-10ASoC: wm5110: Add controls for headphone short circuit protectionCharles Keepax1-0/+7
Add controls to enable/disable the headphone short circuit protection of the headphone outputs. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-10Merge tag 'v3.13-rc3' into asoc-arizonaMark Brown3-27/+4
Linux 3.13-rc3
2014-01-09ASoC: adav80x: Use params_width() rather than memory formatMark Brown1-16/+14
Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2014-01-09ASoC: adau1701: Use params_width() rather than memory formatMark Brown1-18/+16
Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 03:15:56 +0000