summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
AgeCommit message (Collapse)AuthorFilesLines
2012-06-29ASoC: tlv320aic3x: Fix codec pll configure bugHebbar, Gururaja2-3/+2
In sound/soc/codecs/tlv320aic3x.c data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG); snd_soc_write(codec, AIC3X_PLL_PROGA_REG, data | (pll_p << PLLP_SHIFT)); In the above code, pll-p value is OR'ed with previous value without clearing it. Bug is not seen if pll-p value doesn't change across Sampling frequency. However on some platforms (like AM335x EVM-SK), pll-p may have different values across different sampling frequencies. In such case, above code configures the pll with a wrong value. Because of this bug, when a audio stream is played with pll value different from previous stream, audio is heard as differently(like its stretched). Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-06-29ASoC: wm2200: Add missing BCLK rateMark Brown1-0/+1
Without this very high BCLKs will be configured incorrectly. Reported-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-06-25ASoC: wm8994: remove duplicate codeJaroslav Kysela1-3/+0
It seems that the code duplication was added at a merge operation. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-11ASoC: wm8996: Mark the CODEC as cache only when powering off on bootMark Brown1-2/+1
Otherwise we might try to write to a powered off device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: wm8996: Move reset before the initial regulator disableMark Brown1-2/+2
If we don't have control over the LDO but do have control over the other regulators then we may end up trying to write to a powered off device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: wm8996: Remove spurious regulator_bulk_free()Mark Brown1-1/+0
We're using demv_regulator_bulk_get() so don't need to manually free and this is in the CODEC driver not the I2C driver anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: wm8904: Fix cache only managementMark Brown1-9/+4
We should be using the regmap API consistently for all the cache only configuration and we should be going cache only before we power down the supplies. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: wm8904: Fix GPIO and MICBIAS initialisation for regmap conversionMark Brown1-5/+8
We no longer have a flat ASoC cache so can't peer directly into the array any more but should instead use the register I/O functions to update the cache. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org (v3.4)
2012-06-08ASoC: wm2000: Always use a 4s timeout for the firmwareMark Brown1-38/+21
Rather than having varying timeouts depending on the transition always use a 4s timeout. This provides better diagnostics for clocking errors and ensures compatibility with current calibration firmwares. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05ASoC: wm8994: Apply volume updates with clocks enabledMark Brown1-35/+58
Volume updates may not be acted upon if there is no clock applied when the volume update is written. Ensure this doesn't happen by writing out registers with volume updates after we enable each of the clocks. There are more registers updated than before as previously we were relying on wm_hubs to set those for controls it manages. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-06-05ASoC: wm8994: Ensure all AIFnCLK events are run from the _late variantsMark Brown1-4/+8
Ensure that all the actions get taken at appropriate times by calling the _PRE and _POST events for the aifNclk_ev functions explicitly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-05-23Merge tag 'sound-3.5' of ↵Linus Torvalds73-1480/+6966
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is the first big chunk for 3.5 merges of sound stuff. There are a few big changes in different areas. First off, the streaming logic of USB-audio endpoints has been largely rewritten for the better support of "implicit feedback". If anything about USB got broken, this change has to be checked. For HD-audio, the resume procedure was changed; instead of delaying the resume of the hardware until the first use, now waking up immediately at resume. This is for buggy BIOS. For ASoC, dynamic PCM support and the improved support for digital links between off-SoC devices are major framework changes. Some highlights are below: * HD-audio - Avoid accesses of invalid pin-control bits that may stall the codec - V-ref setup cleanups - Fix the races in power-saving code - Fix the races in codec cache hashes and connection lists - Split some common codes for BIOS auto-parser to hda_auto_parser.c - Changed the PM resume code to wake up immediately for buggy BIOS - Creative SoundCore3D support - Add Conexant CX20751/2/3/4 codec support * ASoC - Dynamic PCM support, allowing support for SoCs with internal routing through components with tight sequencing and formatting constraints within their internal paths or where there are multiple components connected with CPU managed DMA controllers inside the SoC. - Greatly improved support for direct digital links between off-SoC devices, providing a much simpler way of connecting things like digital basebands to CODECs. - Much more fine grained and robust locking, cleaning up some of the confusion that crept in with multi-component. - CPU support for nVidia Tegra 30 I2S and audio hub controllers and ST-Ericsson MSP I2S controolers - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas Instruments LM49453. - Some regmap changes needed by the Tegra I2S driver. - mc13783 audio support. * Misc - Rewrite with module_pci_driver() - Xonar DGX support for snd-oxygen - Improvement of packet handling in snd-firewire driver - New USB-endpoint streaming logic - Enhanced M-audio FTU quirks and relevant cleanups - Increment the support of OSS devices to 256 - snd-aloop accuracy improvement There are a few more pending changes for 3.5, but they will be sent slightly later as partly depending on the changes of DRM." Fix up conflicts in regmap (due to duplicate patches, with some further updates then having already come in from the regmap tree). Also some fairly trivial context conflicts in the imx and mcx soc drivers. * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits) ALSA: snd-usb: fix stream info output in /proc ALSA: pcm - Add proper state checks to snd_pcm_drain() ALSA: sh: Fix up namespace collision in sh_dac_audio. ALSA: hda/realtek - Fix unused variable compile warning ASoC: sh: fsi: enable chip specific data transfer mode ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger() ASoC: sh: fsi: use same format for IN/OUT ASoC: sh: fsi: add fsi_version() and removed meaningless version check ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC ASoC: tegra: Add machine driver for WM8753 codec ALSA: hda - Fix possible races of accesses to connection list array ASoC: OMAP: HDMI: Introduce codec ARM: mx31_3ds: Add sound support ASoC: imx-mc13783 cleanup mx31moboard: Add sound support ASoC: mc13783 codec cleanups ASoC: add imx-mc13783 sound support ASoC: Add mc13783 codec mfd: mc13xxx: add codec platform data ASoC: don't flip master of DT-instantiated DAI links ...
2012-05-22Merge tag 'asoc-3.5' of ↵Takashi Iwai3-0/+75
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Last minute updates These are all new code, they've been in -next already so should be OK for merge this time round. I'd been planning to send a pull request today after they'd had a bit of exposure there to make sure breakage didn't propagate into your tree.
2012-05-21Merge tag 'regulator-3.5' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The major thing here is the addition of some helpers to factor code out of drivers, making a fair proportion of regulators much more just data rather than code which is nice. - Helpers in the core for regulators using regmap, providing generic implementations of the enable and voltage selection operations which just need data to describe them in the drivers. - Split out voltage mapping and voltage setting, allowing many more drivers to take advantage of the infrastructure for selectors. - Loads and loads of cleanups from Axel Lin once again, including many changes to take advantage of the above new framework features - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI TPS65913, TI TWL6035 and TI TWL6037. Some of the registration changes to support the core refactoring caused so many conflicts that eventually topic branches were abandoned for this release." * tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits) regulator: tps65910: use of_node of matched regulator being register regulator: tps65910: dt: support when "regulators" node found regulator: tps65910: add error message in case of failure regulator: tps62360: dt: initialize of_node param for regulator register. regulator: tps65910: use devm_* for memory allocation regulator: tps65910: use small letter for regulator names mfd: tpx6586x: Depend on regulator regulator: regulator for Palmas Kconfig regulator: regulator driver for Palmas series chips regulator: Enable Device Tree for the db8500-prcmu regulator driver regulator: db8500-prcmu: Separate regulator registration from probe regulator: ab3100: Use regulator_map_voltage_iterate() regulator: tps65217: Convert to set_voltage_sel and map_voltage regulator: Enable the ab8500 for Device Tree regulator: ab8500: Split up probe() into manageable pieces regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info regulator: max8649: Remove unused check_range() function regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info regulator: da9052: Convert to set_voltage_sel and map_voltage regulator: max8952: Use devm_kzalloc ...
2012-05-21Merge branch 'topic/asoc' into for-linusTakashi Iwai72-1484/+6893
2012-05-18ASoC: OMAP: HDMI: Introduce codecRicardo Neri3-0/+75
Introduce codec for HDMI. At the moment, this is a dummy codec. In the future it will parse the EDID to modify the supported parameters, such as the number of channels and the sample rates. At the moment, it blindly supports all the sample rates and audio channels described in the HDMI 1.4a specification. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18ASoC: mc13783 codec cleanupsPhilippe Rétornaz1-21/+7
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18ASoC: Add mc13783 codecPhilippe Rétornaz4-0/+834
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-16Merge tag 'sound-3.4' of ↵Linus Torvalds2-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few last-minute regression fixes for 3.4 final kernel. All trivial, and Cc'ed to stable kernel." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm8994: Fix AIF2ADC power down ALSA: hda/idt - Fix power-map for speaker-pins with some HP laptops ASoC: cs42l73: Sync digital mixer kcontrols to allow for 0dB
2012-05-15ASoC: wm8994: Fix AIF2ADC power downMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-05-14ASoC: wm8350: Remove direct usage of codec->control_dataMark Brown1-11/+16
Supports regmap conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14ASoC: tlv320aic3x: Remove unused, non-standard headset detectionMark Brown1-18/+0
aic3x_set_headset_detection() isn't made available outside the driver or referenced within the driver which sparse notices and complains about. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13ASoC: wm8350: Don't use irq_baseMark Brown1-19/+27
In preparation for irq_domain support change the code to the not switch based on the irq number. This actually makes things simpler, if slightly repetitive. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13ASoC: lm49453: Fix author e-mail addressMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13ASoC: lm49453: Staticise non-exported symbol lm45453_daiMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13Merge tag 'v3.4-rc7' into for-3.5Mark Brown7-71/+243
Linux 3.4-rc7 Conflicts): drivers/base/regmap/regmap.c (overlap with bug fixes) sound/soc/blackfin/bf5xx-ssm2602.c (overlap with bug fixes)
2012-05-12ASoC: wm8731: Convert to devm_ functionsMark Brown1-27/+10
Use the devm_ versions of the regmap and memory allocation functions, saving some error handling code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12ASoC: wm5100: Convert to module_i2c_driver()Mark Brown1-11/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12Merge remote-tracking branches 'regulator/topic/core', ↵Mark Brown1-2/+6
'regulator/topic/regmap' and 'regulator/topic/register' into regulator-next
2012-05-11ASoC: cs42l73: Sync digital mixer kcontrols to allow for 0dBBrian Austin1-8/+8
Some of the Digital mixer kcontrol max values were off by 1 not allowing a max of 0dB. Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-05-09ASoC: cs42l52: Staticise non-exported symbolsMark Brown1-2/+2
Makes sparse happy and avoids polluting the global namespace. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Brian Austin <brian.austin@cirrus.com>
2012-05-09ASoC: wm8994: Use regmap directly for wm8994_mic_workMark Brown1-7/+9
Make it clearer what context we're operating in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-09ASoC: wm8994: Add debounce to wm8994 mic detectionMark Brown2-7/+22
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-09ASoC: wm8994: Fix sparse warning due to use of 0 as NULLMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-09ASoC: cs42l73: Use DAPM routes to hook AIF widgets to DAI'sBrian Austin1-13/+28
Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-09ASoC: cs42l73: Remove Chip ID's from reg_defaultBrian Austin1-3/+0
We need to read the real register values Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-09ASoC: cs42l73: Convert to module_i2c_driver()Brian Austin1-19/+1
Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-09ASoC: rt5631: Convert to direct regmap API usageMark Brown1-41/+54
We're trying to remove all usage of the ASoc level cache and I/O code and for a device like this with a pretty sparse register map the rbtree cache is a better idea anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-09ASoC: rt5631: Convert to module_i2c_driver()Mark Brown1-11/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08ASoC: alc5632: Convert to devm_regmap_init_i2c()Axel Lin1-7/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08ASoC: alc5632: Convert to module_i2c_driver()Axel Lin1-19/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08ASoC: alc5623: Convert to module_i2c_driver()Axel Lin1-19/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08ASoC: wm9081: Hook DAC up via DAPM rather than streamMark Brown1-2/+3
More current API usage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-07ASoC: twl6040: Remove HS/HF gain ramp featurePeter Ujfalusi1-429/+12
None of the machines uses the gain ramp possibility for HS/HF. This code path is mostly unused and it does not reduces the pop noise on the output (it alters it to sound a bit different). The preferred method to reduce pop noise is to use ABE. Remove the gain ramp, and related features form the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-05Merge tag 'sound-3.4' of ↵Linus Torvalds3-13/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound sound fixes from Takashi Iwai: "As good as nothing exciting here; just a few trivial fixes for various ASoC stuff." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: omap-pcm: Free dma buffers in case of error. ASoC: s3c2412-i2s: Fix dai registration ASoC: wm8350: Don't use locally allocated codec struct ASoC: tlv312aic23: unbreak resume ASoC: bf5xx-ssm2602: Set DAI format ASoC: core: check of_property_count_strings failure ASoC: dt: sgtl5000.txt: Add description for 'reg' field ASoC: wm_hubs: Make sure we don't disable differential line outputs
2012-05-03ASoC: da7210: Minor improvements and a bugfixAshish Chavan1-13/+15
This patch improves playback quality for few sample rates like 8000 and 11025 Hz. This also fixes an issue observed during testing of pll slave mode. Due to the issue, on some rare occasions there was no sound output for first time playback after system boot, though all subsequent playbacks were fine. It was mainly because of the sequence in which SRM bit was enabled. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-02ASoC: wm5100: Set the DAI base address in the DAI driversMark Brown1-21/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-05-01ASoC: wm_hubs: Cache multiple DCS offsetsMark Brown2-10/+67
Rather than invalidating the cached DCS value every time the headphone gain changes store multiple values, indexed by gain. This allows the optimisation we get from the cache to take effect more often. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-30ASoC: wm8350: Replace use of custom I/O with snd_soc_read()/write()Mark Brown1-37/+37
Makes the code more standard and prepares for better framework usage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-30ASoC: wm8350: Remove check for clocks in trigger()Mark Brown1-40/+0
This is now very standard behaviour for CODECs so shouldn't be device specific and we shouldn't really be trying to peer into the register cache from atomic context anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-20 20:07:47 +0000