summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
AgeCommit message (Collapse)AuthorFilesLines
2012-04-16mfd: Convert twl6040 to i2c driver, and separate it from twl corePeter Ujfalusi2-4/+2
Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-05ASoC: ak4642: fixup: mute needs +1 stepKuninori Morimoto1-1/+1
ak4642 out_tlv is +12.0dB to -115.0 dB, and it supports mute. But current settings didn't care +1 step for mute. This patch adds it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-04-02ASoC: sgtl5000: Enable VAG when DAC/ADC upZeng Zhaoming1-12/+13
As manual described, VAG is an internal voltage reference of DAC/ADC, So enabled it before DAC/ADC up. One more thing should care about is VAG fully ramped down requires 400ms, wait it to avoid pop. Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-30Merge tag 'sound-3.4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes for 3.4-rc1, including - mic-recording regression fix for Realtek codec - clean-up of dmaengine parameter mess - WM8894 calibration tweak - minor fixes for asihpi and some bool module parms" * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: fix isa/opti9xx module param type sound: fix oss/msnd_pinnacle module param type ALSA: asihpi - fix return type of hpios_locked_mem_alloc() ASoC: dmaengine_pcm: use dmaengine cyclic wrapper ASoC: Add extra parameter to device_prep_dma_cyclic ALSA: hda/realtek - Fix ADC assignment with a shared HP/Mic pin ASoC: wm8994: Update WM8994 DCS calibration
2012-03-29Merge tag 'asoc-3.4' of ↵Takashi Iwai1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: A few more updates for 3.4 The cleanup of the dmaengine parameter messup and a tweak to some callibration values for WM1811.
2012-03-22Merge tag 'regmap-3.4' of ↵Linus Torvalds1-24/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "Things are really quieting down with the regmap API, while we're still seeing a trickle of new features coming in they're getting much smaller than they were. It's also nice to have some features which support other subsystems building infrastructure on top of regmap. Highlights include: - Support for padding between the register and the value when interacting with the device, sometimes needed for fast interfaces. - Support for applying register updates to the device when restoring the register state. This is intended to be used to apply updates supplied by manufacturers for tuning the performance of the device (many of which are to undocumented registers which aren't otherwise covered). - Support for multi-register operations on cached registers. - Support for syncing only part of the register cache. - Stubs and parameter query functions intended to make it easier for other subsystems to build infrastructure on top of the regmap API. plus a few driver updates making use of the new features which it was easier to merge via this tree." * tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (41 commits) regmap: Fix future missing prototype of devres_alloc() and friends regmap: Rejig struct declarations for stubbed API regmap: Fix rbtree block base in sync regcache: Make sure we sync register 0 in an rbtree cache regmap: delete unused module.h from drivers/base/regmap files regmap: Add stub for regcache_sync_region() mfd: Improve performance of later WM1811 revisions regmap: Fix x86_64 breakage regmap: Allow drivers to sync only part of the register cache regmap: Supply ranges to the sync operations regmap: Add tracepoints for cache only and cache bypass regmap: Mark the cache as clean after a successful sync regmap: Remove default cache sync implementation regmap: Skip hardware defaults for LZO caches regmap: Expose the driver name in debugfs mfd: wm8400: Convert to devm_regmap_init_i2c() mfd: wm831x: Convert to devm_regmap_init() mfd: wm8994: Convert to devm_regmap_init() mfd/ASoC: Convert WM8994 driver to use regmap patches mfd: Add __devinit and __devexit annotations in wm8994 ...
2012-03-21ASoC: wm8994: Update WM8994 DCS calibrationMark Brown1-1/+1
Based on latest production information. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-03-21Merge tag 'asoc-3.4' of ↵Takashi Iwai4-59/+171
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus Last minute ASoC updates for 3.4 There's a couple of small features here that were added late on but have been in -next in my tree and some bug fixes. The wm_hubs stuff is actually bug fixes - the stuff that's currently in 3.4 is a half way house between the two solutions that the latest change allows the machine to select between.
2012-03-19ASoC: wm8994: Provide VMID mode control and fix default sequenceMark Brown2-39/+155
The optimal management of VMID depends on a number of factors which vary dynamically at runtime, for example the connection to a system docking station. In some circumstances it is desirable to keep VMID enabled all the time, in others it is desirable to aggressively power it up and down. Provide a callback allowing machine driver to configure either the normal power up/down mode (WM8994_VMID_MODE_NORMAL) or to maintain VMID even when idle (WM8994_VMID_MODE_FORCE). This callback, wm8994_vmid_mode(), should be called with the CODEC lock. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-19ASoC: wm8994: Add missing break in resumeMark Brown1-0/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-19ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUFMark Brown1-11/+5
It can just be enabled all the time with no impact. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-18Merge branch 'topic/asoc' into for-linusTakashi Iwai78-3952/+10120
2012-03-14ASoC: wm8996: Add 44.1kHz supportMark Brown1-9/+10
The WM8996 specification has been updated to specify 44.1kHz as a supported sample rate. Update the driver to accept this configuration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12ASoC: wm8994: Prevent ABBA deadlock with CODEC and accdet mutexesMark Brown1-35/+34
Currently we can the accdet mutex from within DAPM when updating the device state which means we take accdet then the CODEC mutex but we also do the locking the other way around when responding to the jackdet IRQ. Move all the jackdet use of the CODEC mutex out of the accdet lock to avoid this. Since all the DAPM interactions depend only on a single threaded IRQ this is still serialised. The locking improvements in 3.5 allow a better solution there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-09ASoC: da7210: Remove extra registers from defaults listAshish Chavan1-88/+0
This patch removes following registers from reg map defaults, - Registers which are currently not used by driver - Non existing registers - Volatile registers Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-08ASoC: wm8996: Remove separate output stage enable stepMark Brown1-20/+12
Marginally improve performance during startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-08ASoC: wm8996: Remove some volatile regisers from the defaults tableMark Brown1-2/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-08ASoC: da7210: Update for using I2C regmapAshish Chavan1-38/+196
Current DA7210 driver has I2C support using older register cache methods. This patch updates it for latest regmap framework. This has been tested on DA7210 EVB with Samsung SMDK6410 board. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06Merge tag 'asoc-3.4' of ↵Takashi Iwai4-44/+58
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc A few more ASoC updates, the main one is the move of the audmux driver from arch/arm into sound/soc. There's also some general driver specific tweaks and fixes.
2012-03-06ASoC: Add missing regmap_init_i2c in wm8804_i2c_probeAxel Lin1-0/+6
commit 891271c "ASoC: Convert wm8804 to direct regmap API usage" only converts wm8804_spi_probe to use regmap_init_spi. This patch adds missing regmap_init_i2c in wm8804_i2c_probe. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: wm8962: Remove defaults for volatile registersMark Brown1-14/+3
Save a little RAM. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: wm8962: Remove unneeded pm_runtime_set_active()Mark Brown1-1/+0
The default pm_runtime status is enabled which is what we want. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: wm8994: Use audio mode for jack detection when system is activeMark Brown2-29/+49
When we are out of system sleep always use audio mode for jack detection in order to avoid potential performance issues handing off between modes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05Merge tag 'asoc-3.4' of ↵Takashi Iwai68-1110/+7501
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc This has been a very active release for ASoC, as well as the usual raft of bugfixes and driver updates there's quite a few framework enhancements. Most are either small or are laying the groundwork for user visible features (especially dynamic PCM), the most directly visible change is the dmaengine library. There's also a bunch of regmap API enhancements pulled into the tree so that either the framework or drivers can take advantage of the new features. Changes include: - Support for widgets not associated with a CODEC, an important part of the dynamic PCM framework. - A library factoring out the common code shared by dmaengine based DMA drivers contributed by Lars-Peter Clausen. This will save a lot of code and make it much easier to deploy enhancements to dmaengine. - Support for binary controls, used for providing runtime configuration of algorithm coefficients. - A new DAPM widget type for regulator supplies allowing drivers for devices that can power down unused supplies while active to do without any per-driver code. - DAPM widgets for DAIs, initially giving a speed boost for playback startup and shutdown and also the basis for CODEC<->CODEC DAI link support. - Support for specifying the number of significant bits on audio interfaces, useful for allowing applications to know how much effort to put into generating data for a larger sample format. - Conversion of the FSI driver used on some SH processors to DMAEngine. - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics WM2200.
2012-03-04ASoC: wm8753: fix initializationDenis 'GNUtoo' Carikli1-0/+5
Without that fix the wm8753 SPI initialization fails, and then produces a kernel panic during boot with the following call trace: Unable to handle kernel paging request at virtual address 37386d9b [<c01ccafc>] (regmap_get_val_bytes+0x0/0x14) from [<c0243dfc>] (snd_soc_codec_set_cache_io+0x9c/0xcc) [<c0243dfc>] (snd_soc_codec_set_cache_io+0x9c/0xcc) from [<c0244a4c>] (wm8753_probe+0x5c/0x1c4) [<c0244a4c>] (wm8753_probe+0x5c/0x1c4) from [<c023bb24>] (soc_probe_codec+0x174/0x284) [<c023bb24>] (soc_probe_codec+0x174/0x284) from [<c023c2c0>] (snd_soc_instantiate_cards+0x68c/0xe28) [<c023c2c0>] (snd_soc_instantiate_cards+0x68c/0xe28) from [<c023d278>] (snd_soc_register_card+0x240/0x2d4) [<c023d278>] (snd_soc_register_card+0x240/0x2d4) from [<c023d330>] (soc_probe+0x24/0x40) [<c023d330>] (soc_probe+0x24/0x40) from [<c01c3900>] (platform_drv_probe+0x14/0x18) [...] The commit d3398ff05907167f463e119421b053ce043741d1 ( ASoC: Convert WM8753 to direct regmap API usage ) introduced the problem. Thanks to Lars-Peter Clausen for helping me a bit during the debugging. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-04ASoC: wm8994: Factor out WM1811A detection mode settingMark Brown1-20/+28
Push everything through one function for active use cases, should be no practical effect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-04ASoC: wm8994: Don't bother updating the jackdet mode needlesslyMark Brown1-0/+3
If we're not doing jackdet it's not needed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-04ASoC: wm8994: Disable JACKDET when disabling detectonMark Brown1-0/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-04ASoC: wm8994: Make sure we sync DAPM on WM8958 detection mode changesMark Brown1-0/+2
Normally this will have no effect as we set detection up at system startup before DAPM syncs take effect, this will only be useful if the system enables and disables detection at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-04ASoC: wm_hubs: Disable cache of the DC servo calibration for WM1811Mark Brown3-1/+3
The WM1811 DC servo is able to run much faster than previous devices so the benefit of skipping calibration is not useful. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-04ASoC: wm8994: Suppress noop updates of FLL KMark Brown1-1/+2
Using snd_soc_write() means we always write to the register even if it already contains the newly calculated value. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-04ASoC: wm8994: Push wm8994 private data allocation out into device probeMark Brown1-9/+13
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-02ASoC: wm8962: Run the headphone in class G mode when sidetone is enabledMark Brown1-0/+2
Class W mode with sidetone is not fully supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-01ASoC: wm8994: Disable debounce of jack detection on inserted jackMark Brown1-0/+8
Don't debounce jack detection for inserted jacks, giving improved responsiveness. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-01ASoC: wm8962: Remove register default for PLL2Mark Brown1-2/+0
The initial value can be changed depending on system configuration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-29ASoC: wm8994: Remove stub of register access codeMark Brown1-8/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-29ASoC: wm_hubs: Bomb out if we can't read back the DC servo resultMark Brown1-1/+1
Should have no practical impact but it's safer than trying to soldier on. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-29ASoC: wm8996: Remove stub register cacheMark Brown1-8/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-29ASoC: wm8996: Fix /RESET bounce orderingMark Brown1-1/+1
We want to leave the device out of rather than in reset. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-29ASoC: wm8994: Make sure we don't have MICBIAS on during jackdet modeMark Brown1-12/+13
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-28ASoC: Remove unnecessary -codec from cs4270 driver nameShawn Guo1-1/+1
Similar to what commit 1e3ad57 (ASoC: Remove redundant -codec from WM8776 driver name) does for wm8776 driver, this patch does the same thing for cs4270 driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-27ASoC: wm8753: Convert to devm_kzalloc()Mark Brown1-5/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-23ASoC: wm8962: Convert interrupt handler to direct regmap usageMark Brown1-20/+39
Avoids potential locking issues with anything that needs the CODEC lock. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-23ASoC: wm8962: Remove mistakenly committed debug loggingMark Brown1-4/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-23ASoC: ak4104: Convert to direct regmap API usageMark Brown1-75/+44
Since the cache is currently open coded this is more of a win than for most devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Daniel Mack <zonque@gmail.com>
2012-02-23ASoC: ak4104: Use snd_soc_write() rather than internal write functionMark Brown1-2/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Daniel Mack <zonque@gmail.com>
2012-02-23ASoC: ak4104: Use snd_soc_update_bits() for read/modify/writeMark Brown1-23/+15
Don't use the internal I/O functions directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Daniel Mack <zonque@gmail.com>
2012-02-22mfd/ASoC: Convert WM8994 driver to use regmap patchesMark Brown1-24/+1
Early revisions of several of the WM8994 variants have register updates to improve performance. Move these over to using the regmap patch system instead of open coding them in the audio driver. Since the regmap init is done by the MFD the code is moved there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-21ASoC: wm8994: Move wm_hubs callback before we start ramping VMIDMark Brown1-2/+2
Allows the generic code to set up for that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ASoC: wm8996: Convert to use DAPM routes for stream connectionsMark Brown1-35/+39
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 08:38:40 +0000