summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8804.c
AgeCommit message (Collapse)AuthorFilesLines
2014-07-31ASoC: wm8804: Convert to params_width()Mark Brown1-5/+5
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-06-03Merge remote-tracking branches 'asoc/topic/wm8804' and 'asoc/topic/wm9713' ↵Mark Brown1-3/+14
into asoc-next
2014-05-29ASoC: wm8804: Allow control of master clock divider in PLL generationDaniel Matuschek1-3/+14
WM8804 can run with PLL frequencies of 256xfs and 128xfs for most sample rates. At 192kHz only 128xfs is supported. The existing driver selects 128xfs automatically for some lower samples rates. By using an additional mclk_div divider, it is now possible to control the behaviour. This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow lower jitter and better signal quality. The behavior has to be controlled by the sound card driver, because some sample frequency share the same setting. e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the MCLK divider. Signed-off-by: Daniel Matuschek <daniel@matuschek.net> Tested-by: Florian Meier <florian.meier@koalo.de> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-22Merge remote-tracking branches 'asoc/topic/ux500', 'asoc/topic/wm8731', ↵Mark Brown1-5/+2
'asoc/topic/wm8804', 'asoc/topic/wm8955' and 'asoc/topic/wm8985' into asoc-next
2014-04-25ASoC: wm8804: Use devm_regulator_bulk_get()Fabio Estevam1-5/+2
Using devm_regulator_bulk_get() can make the code cleaner and smaller as we do not need to call regulator_bulk_free() in the error and remove paths. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14ASoC: Add snd_soc_kcontrol_codec() helper functionLars-Peter Clausen1-2/+2
For CODEC controls snd_kcontrol_chip() currently returns a pointer to the CODEC that registered the control. With the upcoming consolidation of platform and CODEC controls this will change. Prepare for this by introducing the snd_soc_kcontrol_codec() helper function that will hide the implementation details of how the CODEC for a control can be obtained. This will allow us to change this easily in the future. The patch also updates all CODEC drivers to use the new helper function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-13Merge remote-tracking branch 'asoc/topic/io' into asoc-nextMark Brown1-8/+0
2014-03-11ASoC: codec: Simplify ASoC probe code.Xiubo Li1-8/+0
For some CODEC drivers like who act as the MFDs children are ignored by this patch. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20ASoC: wm8804: Remove superfluous constTakashi Iwai1-1/+1
As SOC_ENUM_SINGLE_DECL() itself contains const modifier now, we can reduce const from its users. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27ASoC: wm8804: Use IS_ENABLED() macroFabio Estevam1-3/+3
Using the IS_ENABLED() macro can make the code shorter and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2012-12-24ASoC: wm8804: Remove redundant checkFabio Estevam1-3/+0
The condition "if (!freq_in || !freq_out)" has already been tested previously, so no need to do it again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10ASoC: codecs: remove __dev* attributesBill Pemberton1-7/+7
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-23ASoC: wm8804: Convert to use devm_regmap_init_{spi,i2c}()Tushar Behera1-15/+2
Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: codecs: Refresh copyrights for Wolfson driversMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: Add missing regmap_init_i2c in wm8804_i2c_probeAxel Lin1-0/+6
commit 891271c "ASoC: Convert wm8804 to direct regmap API usage" only converts wm8804_spi_probe to use regmap_init_spi. This patch adds missing regmap_init_i2c in wm8804_i2c_probe. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-27ASoC: Set idle_bias_off flag in snd_soc_codec_driverAxel Lin1-1/+1
Since commit 33c5f969 "ASoC: Allow idle_bias_off to be specified in CODEC drivers", now we can set idle_bias_off flag in struct snd_soc_codec_driver for devices can unconditionally support idle_bias_off. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert wm8804 to direct regmap API usageMark Brown1-53/+62
The register map for this device is actually fairly sparse so the rbtree should be beneficial. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert wm8804 to devm_kzalloc()Mark Brown1-8/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Use standard cache sync for wm8804Mark Brown1-19/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-09ASoC: Convert WM8804 to table based control initMark Brown1-3/+4
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02ASoC: Drop unused state parameter from CODEC suspend callbackLars-Peter Clausen1-1/+1
The existence of this parameter is purely historical. None of the CODEC drivers uses it and we always pass in the same value anyway, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen1-1/+1
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31ASoC: Add device tree binding for WM8804Mark Brown1-0/+9
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09ASoC: WM8804 does not support sample rates below 32kHzMark Brown1-2/+7
Reported-by: Kieran O'Leary <Kieran.O'Leary@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-01-13ASoC: Update users of readable_register()/volatile_register()Dimitris Papastamos1-1/+1
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: Do not include soc-dapm.hJarkko Nikula1-1/+0
There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-06ASoC: Decouple DAPM from CODECsLiam Girdwood1-3/+3
Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-11ASoC: checking kzalloc() for IS_ERR() instead of NULLDan Carpenter1-4/+4
There is a typo here that got copy and pasted to several probe functions. kzalloc() returns NULL on allocation failures and not an ERR_PTR. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-05ASoC: WM8804: Retrieve the device revision and print itDimitris Papastamos1-0/+8
Be verbose and print out the device revision. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-04ASoC: WM8804: Power down the PLL correctlyDimitris Papastamos1-3/+3
The PLL is disabled when the corresponding bit is set not the other way around. This commit depends on my other commit with Subject "ASoC: WM8804: Refactor set_pll code to avoid GCC warnings". Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-04ASoC: WM8804: Refactor set_pll code to avoid GCC warningsDimitris Papastamos1-21/+26
Ensure that no uninitialised variable warnings are generated by GCC. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-02ASoC: WM8804: Use a proper DAI nameDimitris Papastamos1-1/+1
Make sure the DAI name does not include a '/' since we might have per DAI debugfs or sysfs entries in the future. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-30ASoC: WM8804: Initial driverDimitris Papastamos1-0/+820
The WM8804 is a high performance consumer mode S/PDIF transceiver with support for 1 received channel and 1 transmitted channel. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-20 23:26:53 +0000