summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2013-02-14ASoC: codecs: Add da7213 codecAdam Thomson1-0/+4
This patch adds support for the Dialog DA7213 audio codec. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-07ALSA: add missing HAS_IOPORT and GENERIC_HARDIRQS dependenciesHeiko Carstens1-1/+1
Fix these two compile errors on s390 which does not have HAS_IOPORT nor GENERIC_HARDIRQS: sound/pci/lx6464es/lx6464es.c: In function ‘snd_lx6464es_free’: sound/pci/lx6464es/lx6464es.c:565:2: error: implicit declaration of function ‘ioport_unmap’ sound/soc/codecs/wm8903.c: In function ‘wm8903_set_pdata_irq_trigger’: sound/soc/codecs/wm8903.c:1954:9: error: implicit declaration of function ‘irq_get_irq_data’ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach1-1/+2
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-02Merge remote-tracking branch 'asoc/topic/si476x' into asoc-nextMark Brown1-0/+4
2012-12-02Merge remote-tracking branch 'asoc/topic/max98090' into asoc-nextMark Brown1-0/+4
2012-12-02Merge remote-tracking branch 'asoc/topic/jz4740' into asoc-nextMark Brown1-0/+1
2012-11-21ASoC: Add max98090 codec driverKuninori Morimoto1-0/+4
This patch adds the max98090 codec prototype driver. It supports Headphone only at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-28ASoC: wm5102: Hook up DSP1Mark Brown1-0/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-28ASoC: adsp: Add ADSP base supportMark Brown1-0/+5
Many current Wolfson devices feature DSPs based around an architecture known as ADSP. Since there is a lot of commonality in the system integration of these devices a common library will be used to provide support for them. This version provides equivalent support for ADSP1 to that currently included in the WM2200 driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-27ASoC: jz4740-codec: Use regmapLars-Peter Clausen1-0/+1
Use regmap-mmio instead of open-coding caching and register accessors. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15Add a codec driver for SI476X MFDAndrey Smirnov1-0/+4
This commit add a sound codec driver for Silicon Laboratories 476x series of AM/FM radio chips. Signed-off-by: Andrey Smirnov <andrey.smirnov@convergeddevices.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ASoC: codecs: Add DA9055 codec driverAshish Chavan1-0/+4
This patch adds support for Dialog semiconductor's DA9055 audio codec. This has been tested on DA9055 EVB with Samsung SMDK6410 board. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-23ASoC: wm0010: Add initial wm0010 DSP driverDimitris Papastamos1-0/+4
The WM0010 is a compact digital signal processor that has been highly optimised for low-power audio applications. Extensive memory resources and core optimisation allow the device to manage all audio processing algorithms efficiently and autonomously, while the host processor sleeps or performs other tasks. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-11ASoC: wm5110: Add audio CODEC driverMark Brown1-0/+6
The WM5110 is a highly integrated low power audio subsystem for smartphones, tablets and other portable audio devices. It combines an advanced DSP feature set with a flexible, high performance audio hub CODEC. This patch adds the audio CODEC driver for the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04ASoC: STA529: Add support for STA529 Audio CodecRajeev Kumar1-0/+4
The STA529 is a digital stereo class-D audio amplifier. It includes an audio DSP, an ST proprietary high-efficiency class-D driver and CMOS power output stage. It is intended for high-efficiency digital-to-power-audio conversion for portable applications. Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23ASoC: wm5102: Initial driverMark Brown1-0/+4
The WM5102 is a highly-integrated low-power audio system for smartphones, tablets and other portable audio devices based on the Arizona platform. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23ASoC: Add shared code for Wolfson Arizona class devicesMark Brown1-0/+5
The Wolfson Arizona series of audio hub CODECs can share a large amount of their driver code as the result of a common register map. This patch adds some of this core support, providing a basis for the initial WM5102 audio driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: codecs: Add DA732x codec driverAdam Thomson1-0/+4
This patch adds support for Dialog DA732x audio codecs. Signed-off-by: Michal Hajduk <Michal.Hajduk@diasemi.com> Signed-off-by: Adam Thomson <Adam.Thomson@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: codecs: Add AB8500 codec-driverOla Lilja1-0/+4
Add codec-driver for ST-Ericsson AB8500 mixed-signal ASIC. Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05ASoC: Support TI Isabelle Audio driverM R Swami Reddy1-0/+4
ASoC: Support TI Isabelle Audio driver The Isabelle Audio IC is a complete low power high fidelity CODEC with integrated ADCs, DACs, decimation and interpolation filters, PLL, and power providers. This device supports 2 analog and 2 digital microphone channels, a mono earpiece driver, stereo class G headphone drivers with ultra low power and best SNR in the industry, stereo Class D speaker drivers, and 2 high performance Line drivers. The below patch is a basic driver code for TI Isabelle audio codec. The functionalities like headset detection, etc., will be included incrementally in the up-coming patches. Signed-off-by: Vishwas A Deshpande <vishwas.a.deshpande@ti.com> Signed-off-by: M R Swami Reddy <mr.swami.reddy@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18ASoC: OMAP: HDMI: Introduce codecRicardo Neri1-0/+4
Introduce codec for HDMI. At the moment, this is a dummy codec. In the future it will parse the EDID to modify the supported parameters, such as the number of channels and the sample rates. At the moment, it blindly supports all the sample rates and audio channels described in the HDMI 1.4a specification. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18ASoC: Add mc13783 codecPhilippe Rétornaz1-0/+4
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13Merge tag 'v3.4-rc7' into for-3.5Mark Brown1-2/+1
Linux 3.4-rc7 Conflicts): drivers/base/regmap/regmap.c (overlap with bug fixes) sound/soc/blackfin/bf5xx-ssm2602.c (overlap with bug fixes)
2012-04-30ASoC: Add support for CS42L52 CodecBrian Austin1-0/+4
This patch adds support for Cirrus Logic CS42L52 Low Power Stereo Codec Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Georgi Vlaev <joe@nucleusys.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16mfd: Convert twl6040 to i2c driver, and separate it from twl corePeter Ujfalusi1-2/+1
Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-01ASoC: Support TI LM49453 Audio driverM R Swami Reddy1-0/+4
Signed-off-by: M R Swami Reddy <mr.swami.reddy@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: Add LAPIS Semiconductor ML26124 driverTomoya MORINAGA1-0/+4
ML26124-01HB/ML26124-02GD is 16bit monaural audio CODEC which has high resistance to voltage noise. On chip regulator realizes power supply rejection ratio be over 90dB so more than 50dB is improved than ever. ML26124-01HB/ ML26124-02GD can deliver stable audio performance without being affected by noise from the power supply circuit and peripheral components. The chip also includes a composite video signal output, which can be applied to various portable device requirements. The ML26124 is realized these functions into very small package the size is only 2.56mm x 2.46mm therefore can be construct high quality sound system easily. ML26124-01HB is 25pin WCSP package; ML26124-02GD is 32pin WQFN package. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-30ASoC: max9768: add driver for max9768 amplifierWolfram Sang1-0/+4
Add a driver supporting the volume control and the mute pin. Shdn pin and DAPM are not taken care of yet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-26ASoC: wm2200: Add WM2200 CODEC driverMark Brown1-0/+4
The WM2200 is a low power mobile CODEC with enhanced Wolfson myZone Ambient Noise Cancellation (ANC) intended for mobile telephony applications. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-06Merge branch 'for-3.2' into for-3.3Mark Brown1-1/+1
2011-12-06ASoC: Fix build dependency for SND_SOC_JZ4740_CODECAxel Lin1-1/+1
Currently SND_SOC_JZ4740_CODEC depends on SOC_JZ4740 but SOC_JZ4740 is not defined in any Kconfig. Thus the codec driver will not be built when select "Build all ASoC CODEC drivers". (Unless it is selected by SND_JZ4740_SOC_QI_LB60). Remove the dependency with SOC_JZ4740, then this code driver can be built when select "Build all ASoC CODEC drivers". Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-03ASoC: Sort WM9090 in with the CODEC driversMark Brown1-3/+3
The driver itself has been a regular CODEC driver for a while now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-03ASoC: Convert WM2000 into a standard CODEC driverMark Brown1-3/+3
We've been able to handle external amps for a while now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29ASoC: Move SigmaDSP firmware loader to ASoCLars-Peter Clausen1-1/+5
It has been pointed out previously, that the firmware subsystem is not the right place for the SigmaDSP firmware loader. Furthermore the SigmaDSP is currently only used in audio products and we are aiming for better integration into the ASoC framework in the future, with support for ALSA controls for firmware parameters and support dynamic power management as well. So the natural choice for the SigmaDSP firmware loader is the ASoC subsystem. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-17ASoC: Add support for CS42L73 codecBrian Austin1-0/+4
This patch adds support for the Cirrus Logic CS42L73 low power stereo codec. Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Georgi Vlaev <joe@nucleusys.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-10ASoC: Add new Realtek ALC5632 CODEC driverLeon Romanovsky1-0/+3
This driver implements basic functionality, using I²C for the control channel. Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: Fix typo in Kconfig symbol for tlv320aic32x4Wolfram Sang1-2/+2
It is currently named "TVL" instead of "TLV". Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: Add Kconfig and Makefile entries for rt5631 codecAxel Lin1-0/+4
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: Add WM5100 driverMark Brown1-0/+4
The WM5100 is a highly integrated low power audio subsystem with advanced digital signal processing capabilities including effects, speech clarity enhancement and active noise cancellation. This initial driver provides support for basic audio paths, further patches will provide more complete functionality. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-17ASoC: Add ADAU1373 codec supportLars-Peter Clausen1-0/+4
This patch adds support for the Analog Devices ADAU1373 audio codec. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-08ASoC: Rename WM8915 to WM8996Mark Brown1-4/+4
For marketing reasons the part will be called WM8996. In order to avoid user confusion rename the driver to reflect this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-26Merge branch 'next/devel2' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (47 commits) OMAP: Add debugfs node to show the summary of all clocks OMAP2+: hwmod: Follow the recommended PRCM module enable sequence OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming OMAP2+: PM: idle clkdms only if already in idle OMAP2+: clockdomain: add clkdm_in_hwsup() OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition() OMAP4: hwmod: Introduce the module control in hwmod control OMAP4: cm: Add two new APIs for modulemode control OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure OMAP4: hwmod data: Add PRM context register offset OMAP4: prm: Remove deprecated functions OMAP4: prm: Replace warm reset API with the offset based version OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros OMAP: hwmod: Wait the idle status to be disabled OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros OMAP2+: hwmod: Init clkdm field at boot time OMAP4: hwmod data: Add clock domain attribute OMAP4: clock data: Add missing divider selection for auxclks ...
2011-07-15ASoC: WM8983: Initial driverDimitris Papastamos1-0/+4
The WM8983 is a low power, high quality stereo CODEC designed for portable multimedia applications. Highly flexible analogue mixing functions enable new application features, combining hi-fi quality audio with voice communication. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: Convert into TWL6040 MFD childMisael Lopez Cruz1-0/+1
Convert TWL6040 CODEC driver into a TWL6040 MFD child, it implies that MFD-level operations like register accesses, clock setting and power management are done through MFD APIs, not directly by CODEC driver anymore. To avoid conflicts with the other MFD child, vibrator registers are skipped in CODEC driver. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04MFD: twl4030-codec -> twl4030-audio: Rename the driverPeter Ujfalusi1-1/+1
Rename the driver, and header file from twl4030-codec to twl4030-audio. To avoid breakage change depending drivers at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Misael Lopez Cruz <misael.lopez@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-28ASoC: Add ADAV80x codec driverLars-Peter Clausen1-0/+4
This patch adds support for the Analog Devices ADAV801 and ADAV803 audio codec. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-22ASoC: add WM8782 ADC Codec DriverJohannes Stezenbach1-0/+4
Signed-off-by: Johannes Stezenbach <js@sig21.net> [zonque@gmail.com: transform to new ASoC structure] Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-22ASoC: add STA32X codec driverJohannes Stezenbach1-0/+4
Signed-off-by: Johannes Stezenbach <js@sig21.net> [zonque@gmail.com: transform to new ASoC structure] Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-18ASoC: Remove adau1701 from SND_SOC_ALL_CODECS due to Sigma dependencyMark Brown1-1/+0
The Sigma code is in drivers/firmware which is only included on a very small subset of architectures and so ends up breaking the build on others. There's a pending patch to make the directory build as standard but it's not merged yet. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-16ASoC: Add ADAU1701 codec driverLars-Peter Clausen1-1/+6
This patch adds support for the Analog Devices ADAU1701 SigmaDSP. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-14 08:10:50 +0000