summaryrefslogtreecommitdiffstats
path: root/sound/pci/ice1712
AgeCommit message (Collapse)AuthorFilesLines
2007-05-11[ALSA] ice1724 - Functioning support for Prodigy 192Pavel Hofman3-6/+349
Fixes: -------- * correct card specific ice1724 initialization * working IEC958 output of the card * renamed capture controls New features: ------------------ * analog input switch (line-in/mic) * optional ak4114 based MI/ODI/O card detection & support: IEC958 input, digital input switch (toslink/coax) Unresolved issues ----------------------- * Analog and digital input enums are listed on playback panel of alsamixer, I do not know how to push them onto the capture one. Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1724 - Add comments for naming of PCM streamsTakashi Iwai1-0/+8
Added some comments regarding naming of PCM streams on vt172x chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1724 - call snd_ak4114_build() in juliTakashi Iwai1-1/+10
Call snd_ak4114_build() in juli support code to build proper mixer elements for SPDIF inputs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ak4114 - Fix possible Oops with callbacksTakashi Iwai1-7/+0
ak4114 code may trigger Oops when the parameters are changed without call of snd_ak4114_build(). Now it checks the existence of kctl element, and the workq is triggered after building the necessary kcontrols. Also, did some code clean up. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1724 - Fix AP192 4wire mode accessTakashi Iwai1-1/+1
ap192_4wire_start() in ice1712/revo.c returns unsigned char whereas it should return unsigned int. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] Fix conflicts between const and __devinitdataTakashi Iwai18-65/+65
Marvin told with a depressed face, gcc doesn't like both __devinitdata and const in the same line. So, remove const from all over places now... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1712: build fixesRalf Baechle7-58/+58
CC [M] sound/pci/ice1712/ice1712.o sound/pci/ice1712/ice1712.c:290: error: snd_ice1712_mixer_digmix_route_ac97 causes a section type conflict sound/pci/ice1712/ice1712.c:1630: error: snd_ice1712_eeprom causes a section type conflict ... Gcc like its __devinitdata readable not const, it seems. An alternative fix would be to remove the __devinitdata attribute but that would result in slight runtime bloat. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] Add snd_pcm_group_for_each_entry() for code cleanupTakashi Iwai2-6/+2
Added a new macro snd_pcm_group_for_each_entry() just for code cleanup. Old macros, snd_pcm_group_for_each() and snd_pcm_group_substream_entry(), are removed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-09Fix misspellings collected by members of KJ list.Robert P. J. Day1-2/+2
Fix the misspellings of "propogate", "writting" and (oh, the shame :-) "kenrel" in the source tree. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-09[ALSA] Add even more 'const' to everything related to TLVTakashi Iwai5-11/+11
Mark TLV data as 'const' Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Add some more 'const', but needs changes in i2c/other/ak4*Takashi Iwai2-9/+9
Make data passed to ak4xxx_create 'const'. Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Add 'const' to files in pci/ice1712/Takashi Iwai26-183/+180
Mark a lot of data as 'const' Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] ice1712 - Reorganize existing eeprom dataTakashi Iwai6-162/+133
Reorganize EEPROM data (in C99 style). Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Add support of the ESI Waveterminal 192M to the ice1724 ALSA driverClement Guedez4-2/+566
This patch adds the support of the ESI Waveterminal 192M soundcard to the ice1724 familly ALSA driver. It's a semi-professionnal soundcard for home studio : many I/O and a quality of sound is good, better than consumer cards, but less musical than professional cards. It use a Via Envy24ht chipset as ice1724 soundcard, Sigmatel stac9640 ADC/DAC for the analog I/O as Prodigy192, and Atmel ak4114 for S/PDIF as ESI Julia. Is working : the 8 analog outputs, the analog inputs 1&2, the mic input 1, the coaxial & optical digital outputs. Signed-off-by: Clement Guedez <klem.dev@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] ice1724 - Add support for Prodigy 7.1 XTToshimune Konno2-10/+46
This patch supports Audiotrack 7.1 XT. 7.1XT is almost same hardware as 7.1LT. so using 7.1 LT's code. Signed-off-by: Toshimune Konno <heitouk@nifty.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] ice1724 - Add support of M-Audio Audiophile 192Takashi Iwai2-1/+208
Added the (experimental) support of M-Audio Audiophile 192 board. Currently, the analog and the digital playbacks seem working fine. The inputs seem not working as far as I've tested yet. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Enable the analog loopback of the Revolution 5.1Jochen Voss3-12/+140
Enable the analog loopback of the Revolution 5.1 card. This patch adds support for the PT2258 volume controller and modifies the Revolution 5.1 driver to make use of this facility. This allows to control the analog loopback of the card. Signed-off-by: Jochen Voss <voss@seehuhn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Enable capture from line-in and CD on Revolution 5.1Jochen Voss1-1/+9
Enable capture from line-in and CD on the Revolution 5.1 card. This patch adds support for switching between the 5 input channels of the AK5365 ADC and modifies the Revolution 5.1 driver to make use of this facility. Previously the capture channel was fixed to channel 0 (microphone on the Revolution 5.1 card). Signed-off-by: Jochen Voss <voss@seehuhn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20[ALSA] Remove IRQF_DISABLED for shared PCI irqsTakashi Iwai2-2/+2
Fix IRQ flags for PCI devices. The shared IRQs for PCI devices shouldn't be allocated with IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't be used. The patch removes unnecessary cast in request_irq and free_irq, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2-5/+5
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-23[ALSA] ak4xxx - Remove bogus IPGA controlsTakashi Iwai1-1/+0
Remove IPGA volume controls and merge the IPGA range to ADC volume controls. These two volumes are not really independent but connected simply in different ranges 0-0x7f and 0x80-max. It doesn't make sense to provide two controls. Since both 0x7f and 0x80 specify 0dB, a hack is needed for IPGA range to skip 0x80 (increment one) for such controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Add dB scale information to ice1724 driverTakashi Iwai4-27/+139
Added the dB scale information to each board support code of ice1724 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Add dB scale information to ice1712 driverTakashi Iwai1-0/+8
Added the dB scale information for native digital volumes of ice1712 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Clean up and add TLV support to AK4xxx i2c driverTakashi Iwai1-18/+29
- Clean up the code in AK4xxx-ADDA i2c code. - Fix capture gain controls for AK5365 - Changed the static table for DAC/ADC mixer labels to use structs - Implemented TLV entries for each AK codec The volumes in AK4524, AK4528 and AK5365 are corrected with a table to be suitable for dB conversion. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] ice1712 - fix 1600->16000Hz value typoJaroslav Kysela1-3/+3
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Revolution 5.1 - complete the AK5365 supportJochen Voss1-1/+1
Complete the AK5365 support. This adds a boolean control to toggle the soft mute feature of the AK5365 chip. Signed-off-by: Jochen Voss <voss@seehuhn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Revolution 5.1 - register the AK5365 ADC with ALSAJochen Voss2-3/+29
Enable capture support for the M-Audio Revolution 5.1 card, by registering the ADC with ALSA. Signed-off-by: Jochen Voss <voss@seehuhn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-12[ALSA] Fix section mismatch errors in ALSA PCI driversTakashi Iwai2-2/+2
Fixed 'section mismatch' errors in ALSA PCI drivers: - removed invalid __devinitdata from pci id tables - fix/remove __devinit of functions called in suspend/resume Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-12[ALSA] Reduce the string length of Terratec Aureon 7.1 UniverseTakashi Iwai1-1/+1
Fix the driver string name for Terratec Aureon 7.1 Universe to fit in 15 letters to avoid the overflow. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-02[PATCH] irq-flags: sound: Use the new IRQF_ constantsThomas Gleixner2-2/+2
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[ALSA] Stereo controls for M-Audio Revolution cardsJani Alinikula1-3/+20
This patch adds stereo controls to revo cards by making the ak4xxx driver mixers configurable from the card driver. Signed-off-by: Jani Alinikula <janialinikula@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-22[ALSA] ice1712 - Set mpu401 info flags from _card_infoAlan Horstmann3-3/+8
To permit use, in ice1712, of the mpu401 info flags recently added to mpu401_uart, adds info_flags in snd_ice1712_card_info so that additional flags can be set, if desired.  'MPU401_INFO_INTEGRATED' is always set with the ice1712.  The flags are passed on to snd_mpu401_uart_new(). _INFO_OUTPUT is set for DMX6fire mpu2. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] ice1724 - Add functionality for Audiotrak Prodigy 7.1 LTTakashi Iwai2-10/+17
This patch adds support for useable front audio channels, user controllable headphone channel and optical output. From: Anho Ki Signed-off-by: Matt Taylor <mwtaylor@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] ice1712 - Disable AC97 for DMX6fireAlan Horstmann1-7/+8
Consumer AC97 is not used by the Terratec DMX6fire, but eeprom bit indicates it is; change the stored value to disable failing consumer mode. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] Change an arugment of snd_mpu401_uart_new() to bit flagsTakashi Iwai2-3/+6
Change the 5th argument of snd_mpu401_uart_new() to bit flags instead of a boolean. The argument takes bits that consist of MPU401_INFO_XXX flags. The callers that used the value 1 there are replaced with MPU401_INFO_INTEGRATED. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] Remove unneeded read/write_size fields in proc text opsTakashi Iwai3-7/+5
Remove unneeded read/write_size fields in proc text ops. snd_info_set_text_ops() is fixed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] ice1712 - Provides specified midi port names instead of defaultsAlan Horstmann3-2/+19
Patch provides for the ice1712 card driver to overwrite the midi port name string given by default in mpu401_uart, with one specified in snd_ice1712_card_info. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-27[ALSA] add __devinitdata to all pci_device_idHenrik Kretzschmar2-2/+2
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-27[ALSA] sound/pci/: remove duplicate #include'sAdrian Bunk1-1/+0
There's no reason for #include'ing linux/dma-mapping.h more than once. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Add Aux input switch control for Aureon UniverseMaximilian Rehkopf2-3/+161
This patch adds a mixer control which allows the user to switch the Aux playback between the internal Aux jack, Wavetable, and Rear Line-In on Aureon Universe cards. For switching, a PCA9554 (8-line GPIO with I2C interface) and a 74HC4052 (dual 4-way mux/demux) are used. Output 0 and 1 of the PCA9554 are connected to the select pins of the 74HC4052. The I2C interface of the PCA9554 is connected to the card's internal SPI bus which is also used to control the WM8770 and CS8415. SPI and I2C on the same lines... To communicate with the PCA9554 the WM8770 and CS8415 are disabled and an I2C Stop Condition is generated before the Start Condition (needed for synchronisation because other SPI traffic appear to confuse the PCA9554). Then a normal I2C data transfer takes place. Programming must be done ridiculously slow; in theory, 4.7us is the minimum delay time for normal-speed I2C according to the datasheet, but even with 10us switching was unreliable. The Windows driver from Terratec does the programming very slowly, too (checked with an oscilloscope). PCA9554 datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/PCA9554_9554A_6.pdf 74HC4052 datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/74HC_HCT4052_4.pdf Signed-off-by: Maximilian Rehkopf <otakon@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] ice1712 - Fix wrong register value for DMX 6FIREAlan Horstmann1-1/+1
I have just discovered I made an error in the register value set in 'Limit dmx6fire to 6 dacs' patch (bug1472). The value set should be '2a' not '0a' as in the original patch, which unintentionally disables the 2nd MPU 401 UART. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-28[PATCH] Replace 0xff.. with correct DMA_xBIT_MASKMatthias Gehre1-0/+2
Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by: Matthias Gehre <M.Gehre@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] Intruduce DMA_28BIT_MASKTobias Klauser1-2/+3
This patch introduces the DMA_28BIT_MASK constant in dma-mapping.h ALSA drivers using this mask are changed to use the new constant. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Jaroslav Kysela <perex@suse.cz>
2006-03-22[ALSA] ice1712 - typo fixes for dxr_enable module optionAlan Horstmann1-4/+4
Modules: ICE1712 driver Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-03-22[ALSA] ice1712 - Fix wrong value types for enum itemsTakashi Iwai1-7/+7
Modules: ICE1712 driver Fix the access to wrong type values for enum items in aureon.c (ALSA bug#1527). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] sound/pci/ice1712/delta.c: make 2 functions staticAdrian Bunk1-2/+2
Modules: ICE1712 driver This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] ice1712 - Fix wordclock status on Delta1010LTDoug McLain1-1/+1
Modules: ICE1712 driver I posted this patch to bug 1806 a while back, and have been awaiting a reply or commit. It currently reports the Locked/No Signal text backwards in envy24control, since i was using an older version of envy24control when I wrote the original code. The Locked/No Signal test was recently reversed in envy24control cvs, so the test in my code needs to be reversed as well. Here is the patch, once again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] ice1712 - Delta 1010LT S/PDIF fixesJaroslav Kysela2-1/+38
Modules: ICE1712 driver See ALSA bug#1806 for details. Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-03-22[ALSA] ice1712 - disable unused ADCs & DACs on DMX6fireAlan Horstmann2-2/+15
Modules: ICE1712 driver Change the value written to hardware configuration register of envy24 chip in the case of Terratec DMX6fire to restrict the active ADCs & DACs to 6. Also add the dxr_enable module option to eventually leave the old behaviour when user requests. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-03-22[ALSA] ice1712 & cs8427 - fix problem for S/PDIF input setupJaroslav Kysela1-15/+18
Modules: I2C cs8427,ICE1712 driver See ALSA bug#1785 for more details. Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 00:15:56 +0000