summaryrefslogtreecommitdiffstats
path: root/sound/pci/hda/patch_sigmatel.c
AgeCommit message (Collapse)AuthorFilesLines
2015-02-23ALSA: hda - Add pin configs for ASUS mobo with IDT 92HD73XX codecTakashi Iwai1-1/+16
BIOS doesn't seem to set up pins for 5.1 and the SPDIF out, so we need to give explicitly here. Reported-and-tested-by: Misan Thropos <misanthropos@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-05ALSA: hda - Set up GPIO for Toshiba Satellite S50DTakashi Iwai1-0/+20
Toshiba Satellite S50D laptop with an IDT codec uses the GPIO4 (0x10) as the master EAPD. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=915858 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-05ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecsTakashi Iwai1-2/+2
stac_store_hints() does utterly wrong for masking the values for gpio_dir and gpio_data, likely due to copy&paste errors. Fortunately, this feature is used very rarely, so the impact must be really small. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-16ALSA: hda - Remove superfluous callbacks from STAC/IDT codecsTakashi Iwai1-36/+2
Now we can register multiple callbacks to each jack, most of hooks used in STAC/IDT codecs can be removed by enabling the powermap update callback for all relevant pins. Along with this, the call of stac_init_power_map() can be moved back to stac_parse_auto_config() and the own build_controls callback can be removed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-16ALSA: hda - Allow multiple callbacks for jackTakashi Iwai1-12/+12
So far, hda_jack infrastructure allows only one callback per jack, and this makes things slightly complicated when a driver wants to assign multiple tasks to a jack, e.g. the standard auto-mute with a power up/down sequence. This can be simplified if the hda_jack accepts multiple callbacks. This patch is such an extension: the callback-specific part (the function and private_data) is split to another struct from hda_jack_tbl, and multiple such objects can be assigned to a single hda_jack_tbl entry. The new struct hda_jack_callback is passed to each callback function now, thus the patch became bigger than expected. But these changes are mostly trivial. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-15ALSA: hda - Make snd_hda_jack_detect_enable_callback() returning the jack objectTakashi Iwai1-8/+6
STAC/IDT driver calls snd_hda_jack_tbl_get() again after calling snd_hda_jack_detect_enable_callback(). For simplifying this, let's make snd_hda_jack_detect_enable_callback() returning the pointer while handling the error with the standard IS_ERR() & co. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11ALSA: hda - Get rid of action field from struct hda_jack_tblTakashi Iwai1-14/+4
The action value assigned to each hda_jack_tbl entry is mostly superfluous. The actually used values are either the widget NID or a value specific to the callback. The former case can be simply replaced by a reference to widget NID itself. The only place doing the latter is STAC/IDT codec driver for the powermap handling. But, the code doesn't need to check the action field at all -- the function jack_update_power() is called either with a specific pin or with NULL. So the check of jack->action can be removed completely there, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11Merge branch 'for-linus' into for-nextTakashi Iwai1-5/+12
Merging for-linus branch for syncing the latest STAC/IDT codec changes to be affected by the upcoming hda-jack rewrites.
2014-09-11ALSA: hda - Fix invalid pin powermap without jack detectionTakashi Iwai1-5/+12
When a driver is set up without the jack detection explicitly (either by passing a model option or via a specific fixup), the pin powermap of IDT/STAC codecs is set up wrongly, resulting in the silence output. It's because of a logic failure in stac_init_power_map(). It tries to avoid creating a callback for the pins that have other auto-hp and auto-mic callbacks, but the check is done in a wrong way at a wrong time. The stac_init_power_map() should be called after creating other jack detection ctls, and the jack callback should be created only for jack-detectable widgets. This patch fixes the check in stac_init_power_map() and its callee at the right place, after snd_hda_gen_build_controls(). Reported-by: Adam Richter <adam_richter2004@yahoo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-03ALSA: hda - Add TLV_DB_SCALE_MUTE bit for relevant controlsTakashi Iwai1-4/+1
The DACs on Sigmatel/IDT codecs do mute at the lowest volume level, and in the earlier drivers, we passed TLV_DB_SCALE_MUTE bit for each volume control element like Speaker and Headphone as well as Master. Along with the translation to the generic parser, however, the TLV bit was lost for the slave controls (e.g. Speaker) but set only to Master. In theory this should have sufficed, but apps, particularly PA, do care the slave volume bits, so we seem to see a regression in the volume controls. This patch adds a flag to hda_gen_spec to specify the DAC mute feature, and adds the TLV bit properly for all relevant volume controls. Also, the TLV bit for vmaster is set in hda_generic.c, so that we can get rid of all tricks from the codec driver side. As the similar hack is applied to Conexant 5051 stuff, we can get rid of it as well. BugLink: https://bugs.launchpad.net/bugs/1357928 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-04Merge branch 'for-next' into for-linusTakashi Iwai1-2/+15
2014-07-30ALSA: hda - fix an external mic jack problem on a HP machineHui Wang1-0/+12
ON the machine, two pin complex (0xb and 0xe) are both routed to the same external right-side mic jack, this makes the jack can't work. To fix this problem, set the 0xe to "not connected". BugLink: https://bugs.launchpad.net/bugs/1350148 Tested-by: Franz Hsieh <franz.hsieh@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-22ALSA: hda - Refactor quirk picking and change quirk priorityDavid Henningsson1-1/+3
Previously, calling one quirk function first and another later would make the latter one take priority, this is now changed to make the former take priority. By adding two special values for fixup_id we can also get rid of the fixup_forced flag. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-15ALSA: hda - Add the pin fixup for HP Envy TS bass speakerTakashi Iwai1-0/+11
NID 0x10 seems corresponding to the bass speaker. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-26Merge branch 'for-linus' into for-nextTakashi Iwai1-1/+57
2014-06-25ALSA: hda - Adjust speaker HPF and add LED support for HP Spectre 13Takashi Iwai1-1/+57
HP Spectre 13 has the IDT 92HD95 codec, and BIOS seems to set the default high-pass filter in some "safer" range, which results in the very soft tone from the built-in speakers in contrast to Windows. Also, the mute LED control is missing, since 92HD95 codec still has no HP-specific fixups for GPIO setups. This patch adds these missing features: the HPF is adjusted by the vendor-specific verb, and the LED is set up from a DMI string (but with the default polarity = 0 assumption due to the incomplete BIOS on the given machine). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=74841 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-25ALSA: hda - Kill the rest of snd_print*() usagesTakashi Iwai1-1/+1
Pass the codec object so that we can replace all the rest of snd_print*() usages with the proper device-specific print helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-21ALSA: hda - fix format type mismatch in sound/pci/hda/patch_sigmatel.cToralf Förster1-2/+2
Signed-off-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-27ALSA: hda/sigmatel - Allow auto-switching for dock line-in of HP laptopsTakashi Iwai1-0/+3
Many HP laptops with STAC codecs have a docking station port and BIOS sets the pins for the input on the dock as a line in. Because the generic parser doesn't handle a line in pin as auto-switchable, this resulted in the manual capture source selection on these laptops. However, from the usability POV, the automatic switching is easier. This patch adds the line_in_auto_switch hint in the fixup function for these laptops. Even if no dock port is present, this should be harmless as the generic parser allows the auto-switching only in a limited situation (all three pins are located in different positions). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25ALSA: hda - Replace with standard printkTakashi Iwai1-6/+6
Use dev_err() and co for messages from HD-audio controller and codec drivers. The codec drivers are mostly bound with codec objects, so some helper macros, codec_err(), codec_info(), etc, are provided. They merely wrap the corresponding dev_xxx(). There are a few places still calling snd_printk() and its variants as they are called without the codec or device context. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25ALSA: hda - Add a fixup for HP Folio 13 mute LEDTakashi Iwai1-0/+20
HP Folio 13 may have a broken BIOS that doesn't set up the mute LED GPIO properly, and the driver guesses it wrongly, too. Add a new fixup entry for setting the GPIO pin statically for this laptop. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70991 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-20ALSA: hda - Enable front audio jacks on one HP desktop modelHui Wang1-0/+13
The front headphone and mic jackes on a HP desktop model (Vendor Id: 0x111d76c7 Subsystem Id: 0x103c2b17) can not work, the codec on this machine has 8 physical ports, 6 of them are routed to rear jackes and all of them work very well, while the remaining 2 ports are routed to front headphone and mic jackes, but the corresponding pin complex node are not defined correctly. After apply this fix, the front audio jackes can work very well. [trivial fix of enum definition by tiwai] BugLink: https://bugs.launchpad.net/bugs/1282369 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: Gerald Yang <gerald.yang@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-07ALSA: hda - Fix inconsistent Mic mute LEDTakashi Iwai1-10/+17
The current code for controlling mic mute LED in patch_sigmatel.c blindly assumes that there is a single capture switch. But, there can be multiple multiple ones, and each of them flips the state, ended up in an inconsistent state. For fixing this problem, this patch adds kcontrol to be passed to the hook function so that the callee can check which switch is being accessed. In stac_capture_led_hook(), the state is checked as a bitmask, and turns on the LED when all capture switches are off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-13ALSA: hda - Apply codec power_filter to FG nodesTakashi Iwai1-24/+12
Apply the codec->power_filter to the FG nodes in general for reducing hackish set_power_state ops override in patch_sigmatel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-26ALSA: hda - Drop bus->avoid_link_reset flagTakashi Iwai1-1/+2
Use bus->power_keep_link_on instead. The controller shouldn't go to D3 when the link isn't reset, so essentially avoiding the link reset means avoiding the runtime PM. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-15ALSA: hda - load EQ params into IDT codec on HP bNB13 systemsVitaliy Kulikov1-1/+531
Adds linear EQ filtering for integrated speaker protection Signed-off-by: Vitaliy Kulikov <vitaliy.kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24ALSA: hda - Fix mute LED on HP laptops in runtime suspendTakashi Iwai1-1/+3
When HP laptops with mute and mic-record LEDs go to runtime suspend, these LEDs are turned on forcibly no matter whether GPIO pis are on or off. This strange behavior seems triggered by resetting the HD-audio bus link at azx_rutime_suspend(). So, just add a new hda_bus flag to avoid the link reset at runtime suspend and set it for these HP machines. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-23Merge tag 'asoc-v3.12' of ↵Takashi Iwai1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.12 - DAPM is now mandatory for CODEC drivers in order to avoid the repeated regressions in the special cases for non-DAPM CODECs and make it easier to integrate with other components on boards. All existing drivers have had some level of DAPM support added. - A lot of cleanups in DAPM plus support for maintaining controls in a specific state while a DAPM widget all contributed by Lars-Peter Clausen. - Core helpers for bitbanged AC'97 reset from Markus Pargmann. - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson Microelectronics WM8997. - Support for building drivers that can support it cross-platform for compile test.
2013-08-02ALSA: hda - Fix missing fixup for Mac Mini with STAC9221Takashi Iwai1-0/+1
A fixup for Apple Mac Mini was lost during the adaption to the generic parser because the fallback for the generic ID 8384:7680 was dropped, and it resulted in the silence output (and maybe other problems). Unfortunately, just adding the missing subsystem ID wasn't enough, in this case. The subsystem ID of this machine is 0000:0100 (what Apple thought...?), and since snd_hda_pick_fixup() doesn't take the vendor id zero into account, the driver ignored this entry. Now it's fixed to regard the vendor id zero as a valid value. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-29ALSA: hda - Remove analog mic pin override from STAC9228 dell-bios quirkTakashi Iwai1-2/+12
The current fixup for dell-bios model with STAC9228 codec contains the override of pin 0x0c for analog mic. But this is actually just adding a bogus pin and confuses the parser. Better to remove it for the auto-mic switching. Meanwhile, for a possible regression, keep the old configuration as model=dell-bios-amic, so that people can test it again quickly. Tested on Dell 1420n laptop. Reported-and-tested-by: Eric Shattow <lucent@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-19ALSA: hda - Remove NO_PRESENCE bit override for Dell 1420n LaptopTakashi Iwai1-1/+1
The quirk for Dell laptops with STAC9228 overrides the pin default config of NID 0x0f to the value with AC_DEFCFG_MISC_NO_PRESENCE bit on. I'm not quite sure why this was done so, but can guess that this was introduced for avoiding this to be muted by another headphone plug. Now, after transition to the generic parser, this workaround rather causes a problem (notably as unexpected speaker mutes) because the pin is seen as if it's always plugged in. Since the generic parser can handle multiple headphone plugging gracefully, we can get rid of this override now. Reported-and-tested-by: Eric Shattow <lucent@gmail.com> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-19ALSA: hda - Fix EAPD GPIO control for Sigmatel codecsTakashi Iwai1-5/+6
The EAPD GPIO is dynamically turned on/off for some machines with Sigmatel codecs, but this didn't work as expected, and it resulted in spontaneous lost of speaker outputs per HP plugging or power-saving. This patch fixes the bug by simply including spec->eapd_mask into spec->gpio_mask and spec->gpio_data bits. Reported-and-tested-by: Eric Shattow <lucent@gmail.com> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-25ALSA: hda - Remove superfluous stac_resume()Takashi Iwai1-10/+0
The stac_resume() is exactly what the default resume code does, so we don't have to define and use it doubly. Let's cut it off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-28ALSA: hda - Enable mic-mute LED on more HP laptopsTakashi Iwai1-0/+4
The newer HP laptops have SSID 103c:20xx and 103c:21xx, and these usually have the mic-mute LED on Fn-F8. Let's enable it, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-21ALSA: hda - Enable "Headset Mic" name for some Dell Latitude devicesDavid Henningsson1-1/+5
Now that we have a "Headset Mic" name, let's use it for some devices we know for sure has a headset mic jack. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18ALSA: hda - Move beep attach/detach calls in hda_generic.cTakashi Iwai1-23/+9
Instead of calling snd_hda_attach_beep_device() and snd_hda_detach_beep_device() in each codec driver, move them to the generic parser. The codec driver just needs to set spec->beep_nid for activating the digital beep. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18Merge branch 'for-linus' into for-nextTakashi Iwai1-0/+29
Back-merged for refactoring beep stuff.
2013-03-14ALSA: hda - Disable IDT eapd_switch if there are no internal speakersDavid Henningsson1-0/+29
If there are no internal speakers, we should not turn the eapd switch off, because it might be necessary to keep high for Headphone. BugLink: https://bugs.launchpad.net/bugs/1155016 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-13ALSA: hda - Don't apply EAPD power filter as defaultTakashi Iwai1-0/+1
So far, the driver doesn't power down the widget at going down to D3 when the widget node has an EAPD capability and EAPD is actually set on all codecs unless codec->power_filter is set explicitly. This caused a problem on some Conexant codecs, leading to click noises, and we set it as NULL there. But it is very unlikely that the problem hits only these codecs. Looking back at the development history, this workaround for EAPD was introduced just for some laptops with STAC9200 codec, then we applied it blindly for all. Now, since it's revealed to have an ill effect, we should disable this workaround per default and apply only for the known requiring systems. The EAPD workaround is implemented now as snd_hda_codec_eapd_power_filter(), and this has to be set explicitly by the codec driver when needed. As of now, only patch_stac9200() sets this one. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-06ALSA: hda - Apply mic-mute LED fixup for new HP laptopsTakashi Iwai1-0/+2
It's mostly harmless to apply it for new models even if they have no mic mute LED (just toggling an unused GPIO pin). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-01ALSA: hda - add support for IDT 92HD95 HDA codecVitaliy Kulikov1-0/+39
Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-28ALSA: hda - Fix powermap for external mics on IDT codecsDavid Henningsson1-0/+8
This patch fixes a regression of the external mic not working on HP Probook 4520s. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-24ALSA: hda - Enable power down of unused widgets for IDT codecsTakashi Iwai1-8/+3
IDT codecs can work well with this new feature, so let's enable it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-24ALSA: hda - Add power state filteringTakashi Iwai1-1/+1
Add a hook to struct hda_codec for filtering the target power state of each widget when powering up/down. The current hackish EAPD check is implemented as the default hook pointer, too. This allows codec drivers to implement own power filter. In the upcoming changes, the generic parser will have the better power filter based on the active paths. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-22ALSA: hda - Revive SPDIF mux for IDT/STAC codecsTakashi Iwai1-0/+101
The stuff that was dropped while transition to the generic parser is now recovered. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-21ALSA: hda - Add aamix NID to IDT 92HD codecsTakashi Iwai1-0/+3
IDT codecs have analog-loopback mixer widgets, but we haven't cared about it, so far. Let's set them. This will avoid also possible wrong routes for the input paths. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-21ALSA: hda - Remove superfluous header inclusionsTakashi Iwai1-1/+0
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda/sigmatel - Add bass speaker support for HP ENVY Spectre XTTakashi Iwai1-0/+11
The pin configuration for the bass speaker needs to be corrected in a fixup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18ALSA: hda - Consolidate cap_sync_hook and capture_switch_hookTakashi Iwai1-3/+9
Two hooks in hda_gen_spec, cap_sync_hook and capture_switch_hook, play very similar roles. The only differences are that the former is called more often (e.g. at init or switching capsrc) while the latter can take an on/off argument. As a more generic implementation, consolidate these two hooks, and pass snd_ctl_elem_value pointer as the second argument. If the secondary argument is non-NULL, it can take the on/off value, so the caller handles it like the former capture_switch_hook. If it's NULL, it's called in the init or capsrc switch case. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-17ALSA: hda - Use generic parser for STAC/IDT codec driverTakashi Iwai1-3951/+768
Finally we reached here. All codecs driver (except for CA0132, which has really device-specific requirements) have been converted to use the generic parser. This patch appears bigger than others since it also involves with the code shuffling, but mostly the cut-off of parser codes and adapt to the generic parser flags. Most of fixup codecs haven't been changed but just removed a few unnecessary codes. The only missing stuff is the SPDIF mux control. It'll be added again later. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-26 08:17:04 +0000