summaryrefslogtreecommitdiffstats
path: root/sound/pci/ctxfi
AgeCommit message (Collapse)AuthorFilesLines
2018-07-27ALSA: ctxfi: cthw20k2: Replace mdelay() with msleep() and usleep_range()Jia-Ju Bai1-6/+6
hw_pll_init(), hw_dac_stop(), hw_dac_start() and hw_adc_init() are never called in atomic context. They call mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA:: ctxfi: cthw20k1: Replace mdelay() with msleep()Jia-Ju Bai1-3/+3
hw_pll_init(), hw_reset_dac() and hw_card_init() are never called in atomic context. They calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-18ALSA: ctxfi: use enum type CT_SUM_CTL where appropriateStefan Agner1-7/+8
Currently a variable of type enum CT_AMIXER_CTL is used for enum CT_SUM_CTL values. This leads to warnings when using clang: sound/pci/ctxfi/ctmixer.c:945:32: warning: implicit conversion from enumeration type 'enum CT_SUM_CTL' to different enumeration type 'enum CT_AMIXER_CTL' [-Wenum-conversion] for (i = AMIXER_MASTER_F, j = SUM_IN_F; ~ ^~~~~~~~ sound/pci/ctxfi/ctmixer.c:975:29: warning: implicit conversion from enumeration type 'enum CT_SUM_CTL' to different enumeration type 'enum CT_AMIXER_CTL' [-Wenum-conversion] for (i = AMIXER_PCM_F, j = SUM_IN_F; i <= AMIXER_PCM_S; i++, j++) { ~ ^~~~~~~~ Introduce enum CT_SUM_CTL k and it instead. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook4-13/+15
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-28sound: Use octal not symbolic permissionsJoe Perches2-3/+3
Convert the S_<FOO> symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...> Miscellanea: o Wrapped one multi-line call to a single line Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-13Merge tag 'asoc-v4.15' of ↵Takashi Iwai1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model thanks to some dedicated and persistent work from Robert Jarzmik. - Continued work from Morimoto-san on moving us towards being able to use components for everything. - Lots of cleanups for the Intel platform code, including support for their open source audio firmware. - Support for scaling MCLK with sample rate in simple-card. - Support for AMD Stoney platform.
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-26ALSA: Convert timers to use timer_setup()Kees Cook1-4/+3
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. These are all the "mechanical" changes remaining in the sound subsystem. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-31ALSA: ctxfi: Remove null check before kfreeHimanshu Jha2-8/+4
kfree on NULL pointer is a no-op and therefore checking is redundant. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-23ALSA: ctxfi: make hw structures constBhumika Goyal2-2/+2
Make these const as they are only used in a copy operation. Done using Coccinelle: @match disable optional_qualifier@ identifier s; @@ static struct hw s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct hw s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-22ALSA: ctxfi: Use common error handling code in two functionsMarkus Elfring1-20/+22
Add jump targets so that a bit of exception handling can be better reused at the end of these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-12ALSA: ctxfi: make snd_pcm_hardware constBhumika Goyal1-3/+3
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20ALSA: ctxfi: Fix the incorrect check of dma_set_mask() callTakashi Iwai1-1/+1
In the commit [15c75b09f8d1: ALSA: ctxfi: Fallback DMA mask to 32bit], I forgot to put "!" at dam_set_mask() call check in cthw20k1.c (while cthw20k2.c is OK). This patch fixes that obvious bug. (As a side note: although the original commit was completely wrong, it's still working for most of machines, as it sets to 32bit DMA mask in the end. So the bug severity is low.) Fixes: 15c75b09f8d1 ("ALSA: ctxfi: Fallback DMA mask to 32bit") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28ALSA: ctxfi: Fallback DMA mask to 32bitTakashi Iwai2-26/+12
Currently ctxfi driver tries to set only the 64bit DMA mask on 64bit architectures, and bails out if it fails. This causes a problem on some platforms since the 64bit DMA isn't always guaranteed. We should fall back to the default 32bit DMA when 64bit DMA fails. Fixes: 6d74b86d3c0f ("ALSA: ctxfi - Allow 64bit DMA") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-12ALSA: pci: constify local structuresJulia Lawall1-1/+1
For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-07ALSA: squash lines for simple wrapper functionsMasahiro Yamada1-5/+1
Remove unneeded variables and assignments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-02ALSA: constify snd_pcm_ops structuresJulia Lawall1-2/+2
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-17ALSA: ctxfi: Change structure initialisation to C99 styleAmitoj Kaur Chawla1-17/+17
For readability and to allow for structure randomisation, replace the in order struct initialisation style with explicit field style. The Coccinelle semantic patch used to make this change is as follows: @decl@ identifier i1,fld; type T; field list[n] fs; @@ struct i1 { fs T fld; ...}; @@ identifier decl.i1,i2,decl.fld; expression e; position bad.p, bad.fix; @@ struct i1 i2@p = { ..., + .fld = e - e@fix ,...}; Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-09ALSA: constify ct_timer_ops structuresJulia Lawall1-3/+3
The ct_timer_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-11-11ALSA: ctxfi: constify rsc ops structuresJulia Lawall8-18/+18
The various rsc ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-16ALSA: remove deprecated use of pci apiQuentin Lambert2-4/+4
Replace occurences of the pci api by appropriate call to the dma api. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_ATOMIC ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_ATOMIC ) ) Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-11Merge branch 'topic/pci-cleanup' into for-nextTakashi Iwai2-21/+0
2015-01-09ALSA: ctxfi: Simplify PM callbacksTakashi Iwai2-21/+0
This is a similar cleanup like the commit [3db084fd0af5: ALSA: fm801: PCI core handles power state for us]. Since pci_set_power_state(), pci_save_state() and pci_restore_state() are already done in the PCI core side, so we don't need to it doubly. Also, pci_enable_device(), pci_disable_device() and pci_set_master() calls in PM callbacks are superfluous nowadays, too, so get rid of them as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-04ALSA: Deletion of checks before the function call "iounmap"Markus Elfring2-8/+2
The iounmap() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-03ALSA: ctxfi: Neaten get_daio_rscJoe Perches1-17/+13
Move the pointer declarations into the blocks that use them. Neaten the kfree calls when the _init functions fail. Trivially reduces object size (defconfig x86-64) $ size sound/pci/ctxfi/ctdaio.o.* text data bss dec hex filename 5287 224 0 5511 1587 sound/pci/ctxfi/ctdaio.o.new 5319 224 0 5543 15a7 sound/pci/ctxfi/ctdaio.o.old Signed-off-by: Joe Perches <joe@perches.com> Noticed-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-28ALSA: ctxfi: Kill the rest snd_print*()Takashi Iwai2-4/+6
Use the standard dev_*() instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-21ALSA: ctxfi: remove unused variableSudip Mukherjee1-4/+0
As of now the pointer to struct dai is not being used anywhere in the function. So it is safe to remove the variable. If we are ever doing anything with the container_of(daio, struct dai, daio), then at that time we can again add the variable. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-30ALSA: ctxfi: pr_* replaced with dev_*Sudip Mukherjee11-52/+89
pr_* macros replaced with dev_* as they are more preffered over pr_*. each file which had pr_* was reviewed manually and replaced with dev_*. here we have actually used the various snd_card which was added to some structures of ctxfi via a previous patch of this series. in the ctvmem.c file we have passed a reference of ct_atc as an argument to get_vm_block function so that it can be used from dev_*. since dev_* will print the device information , so the prefix of "ctxfi" from the various pr_* were also removed. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-30ALSA: ctxfi: ctatc: added reference to snd_cardSudip Mukherjee1-4/+8
added reference of the card in the convert_format function so that we can know which card has called the function. this reference of the snd_card will actually be used in a later patch to convert the pr_* macro to dev_*. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-30ALSA: ctxfi: initialized snd_cardSudip Mukherjee4-0/+6
initialized the reference of snd_card which was added to the various structures through the previous patch of the series. these references of snd_card will be used in a later patch to convert the pr_* macros to dev_* Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-30ALSA: ctxfi: added reference of snd_cardSudip Mukherjee5-18/+26
added a pointer of snd_card in some of the structures to get a reference of the card from other functions. these references of snd_card will be initialised in the next patch of this series and as of now these snd_card will be used to print the the device information when we convert the pr_* macros to dev_* in a later patch of this series. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-30ALSA: ctxfi: removed typecast to (struct hw *)Sudip Mukherjee3-21/+13
the previous patch of the series has converted the void * to struct hw * . Now this patch removes the typecasting to (struct hw *) which is not needed any more. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-30ALSA: ctxfi: changed void * to struct hw *Sudip Mukherjee10-22/+24
in the code we have void *hw and while using we are always typecasting it to (struct hw *). it is better to use void type of pointer when we store different types of pointer , but in this code we are only having struct hw. So changed all the relevant reference of void *hw to struct hw *hw, without any modification of the existing code logic. the next patch of the series will remove the typecasting which is not required now. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-23ALSA: ctxfi: sparse warningSudip Mukherjee3-10/+10
fixed sparse warning of incorrect type (different address spaces) in cthw20k1.c and cthw20k2.c which was being actually caused as mem_base was of the type unsigned long. Again as mem_base was previously unsigned long , so it required many typecasts in the code to convert interger to pointer. Now after giving the correct type of mem_base as void __iomem * we can also remove those typecasts maintaining the same functionality and logic of the code. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11Merge branch 'for-linus' into for-nextTakashi Iwai1-3/+1
Merging for-linus branch for syncing the latest STAC/IDT codec changes to be affected by the upcoming hda-jack rewrites.
2014-08-28Merge tag 'sound-3.17-rc3' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here contains not many exciting changes but just a few minor ones: An off-by-one proc write fix, a couple of trivial incldue guard fixes, Acer laptop pinconfig fix, and a fix for DSD formats that are still rarely used" * tag 'sound-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Set up initial pins for Acer Aspire V5 ALSA: pcm: Fix the silence data for DSD formats ALSA: ctxfi: ct20k1reg: Fix typo in include guard ALSA: hda: ca0132_regs.h: Fix typo in include guard ALSA: core: fix buffer overflow in snd_info_get_line()
2014-08-26ALSA: ctxfi: fix broken user-visible stringSudip Mukherjee7-43/+27
as broken user-visible strings breaks the ability to grep for them , so this patch fixes the broken user-visible strings Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-26ALSA: ctxfi: prink replacementSudip Mukherjee10-42/+42
as pr_* macros are more preffered over printk, so printk replaced with corresponding pr_err and pr_alert this patch will generate a warning from checkpatch for an unnecessary space before new line and has not been fixed as this patch is only for printk replacement. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-25ALSA: ctxfi: ctpcm.c: printk replacementSudip Mukherjee1-3/+3
replaced printk with corresponding pr_err Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-22ALSA: ctxfi: ct20k1reg: Fix typo in include guardRasmus Villemoes1-3/+1
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-12ALSA: pci: Convert to snd_card_new() with a device pointerTakashi Iwai2-3/+2
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-10ALSA: ctxfi - Work around emu20k1 glitch to prevent buffered sound data lossSarah Bessmer1-0/+5
Occasionally, on playback stream ringbuffer wraparound, the EMU20K1 hardware will momentarily return 0 instead of the proper current(loop) address. This patch handles that case, fixing the problem of playback position corruption and subsequent loss of buffered sound data, that occurs with some common buffering layout patterns(e.g. multiple simultaneous output streams with differently-sized or non-power-of-2-sized buffers). An alternate means of fixing the problem would be to read the ca register continuously, until two sequential reads return the same value; however, that would be a more invasive change, has performance implications, and isn't necessary unless there are also issues with the value not being updated atomically in regards to individual bits or something similar(which I have not encountered through light testing). I have no EMU20K2 hardware to confirm if the issue is present there, but even if it's not, this change shouldn't break anything that's not already broken. Signed-off-by: Sarah Bessmer <aotos@fastmail.fm> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-06ALSA: ctxfi: Use WARN_ON() instead of BUG_ON()Takashi Iwai1-2/+4
BUG_ON() is rather useless for debugging as it leads to panic(). Use WARN_ON() and handle the error cases accordingly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-13ALSA: ctxfi: Staticize local symbolsSachin Kamat1-2/+2
Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-29ALSA: PCI: Remove superfluous pci_set_drvdata(pci, NULL) at removeTakashi Iwai1-1/+0
As drvdata is cleared to NULL at probe failure or at removal by the driver core, we don't have to call pci_set_drvdata(pci, NULL) any longer in each driver. The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in hda_intel.c. Since this function itself releases the card instance, we need to clear drvdata here as well, so that it won't be released doubly in the remove callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07ALSA: pci: remove __dev* attributesBill Pemberton6-23/+23
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: Define more channel map positionsTakashi Iwai1-3/+3
For following the standard, define more channel map positions and shuffle the items a bit: - As both PulseAudio and gstreamer define MONO channel position explicitly, we should follow that, too. The mono streams point to this channel position unless they are explicitly assigned to certain channel positions. - Top-front-* and Top-rear-* positions are added, carried from PulseAudio's definitions. - Move NA and MONO definitions at the top of table right after UNKNOWN, since these are more abstract in comparison with other practical positions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ctxfi: Fix mono channel map to UNKNOWNTakashi Iwai1-3/+3
To follow the previous commit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: ctxfi: Implement channel mapsTakashi Iwai1-0/+50
Assign the multi-channel map to front PCM, and other channel map to each other channel PCM. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 15:36:36 +0000