summaryrefslogtreecommitdiffstats
path: root/sound/pci/cs5535audio
AgeCommit message (Collapse)AuthorFilesLines
2015-01-28ALSA: Include linux/io.h instead of asm/io.hTakashi Iwai1-1/+1
Nowadays it's recommended. Replace all in a shot. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-09ALSA: cs5535audio: Simplify PM callbacksTakashi Iwai1-18/+0
This is a similar cleanup like the commit [3db084fd0af5: ALSA: fm801: PCI core handles power state for us]. Since pci_set_power_state(), pci_save_state() and pci_restore_state() are already done in the PCI core side, so we don't need to it doubly. Also, pci_enable_device(), pci_disable_device() and pci_set_master() calls in PM callbacks are superfluous nowadays, too, so get rid of them as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-26ALSA: cs5535audio: Use standard printk helpersTakashi Iwai4-21/+25
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-12ALSA: pci: Convert to snd_card_new() with a device pointerTakashi Iwai1-3/+2
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-05ALSA: cs5535audio: use named constants for pci_power_t valuesJulia Lawall1-1/+1
The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev; @@ pci_set_power_state(pdev, - 3 + PCI_D3hot ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-29ALSA: Use strlcpy() instead of strncpy()Takashi Iwai1-2/+2
We tend to make stupid mistakes with strncpy(). Let's take a safer one, strlcpy(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-29ALSA: PCI: Remove superfluous pci_set_drvdata(pci, NULL) at removeTakashi Iwai1-1/+0
As drvdata is cleared to NULL at probe failure or at removal by the driver core, we don't have to call pci_set_drvdata(pci, NULL) any longer in each driver. The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in hda_intel.c. Since this function itself releases the card instance, we need to clear drvdata here as well, so that it won't be released doubly in the remove callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07ALSA: pci: remove __dev* attributesBill Pemberton4-20/+20
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEPTakashi Iwai2-2/+2
Otherwise we may get compile warnings due to unused functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03ALSA: Convert to new pm_ops for PCI driversTakashi Iwai3-11/+12
Straightforward conversion to the new pm_ops from the legacy suspend/resume ops. Since we change vx222, vx_core and vxpocket have to be converted, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24ALSA: pci: clean up using module_pci_driver()Takashi Iwai1-13/+2
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-19ALSA: module_param: make bool parameters really boolRusty Russell1-1/+1
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-21ALSA: cs5535 - Fix an endianness conversionDan Carpenter1-1/+1
desc->size is supposed to be a le16 type. On a big endian system the current code will set ->size to zero. We fixed a similar bug on the next line but missed this one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31sound: fix drivers needing module.h not moduleparam.hPaul Gortmaker1-1/+1
The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-22Merge branch 'topic/misc' into for-linusTakashi Iwai1-2/+2
2011-06-30ALSA: cs5535 - Fix invalid big-endian conversionsTakashi Iwai1-2/+2
Fix the wrongly converted short values: sound/pci/cs5535audio/cs5535audio_pcm.c:152: warning: large integer implicitly truncated to unsigned type sound/pci/cs5535audio/cs5535audio_pcm.c:160: warning: large integer implicitly truncated to unsigned type Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*Takashi Iwai1-1/+1
The name argument of request_irq() appears in /proc/interrupts, and it's quite ugly when the name entry contains a space or special letters. In general, it's simpler and more readable when the module name appears there, so let's replace all entries with KBUILD_MODNAME. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10ALSA: Use KBUILD_MODNAME for pci_driver.name entriesTakashi Iwai1-1/+1
The convention for pci_driver.name entry in kernel drivers seem to be the module name or equivalent ones. But, so far, almost all PCI sound drivers use more verbose name like "ABC Xyz (12)", and these are fairly confusing when appearing as a file name. This patch converts the all pci_driver.name entries in sound/pci/* to use KBUILD_MODNAME for more unified appearance. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-23PCI: make pci_restore_state return voidJon Mason1-6/+1
pci_restore_state only ever returns 0, thus there is no benefit in having it return any value. Also, a large majority of the callers do not check the return code of pci_restore_state. Make the pci_restore_state a void return and avoid the overhead. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2-2/+0
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-09sound: use DEFINE_PCI_DEVICE_TABLEAlexey Dobriyan1-1/+1
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-15ALSA: cs5535audio: free OLPC quirks from reliance on MGEODE_LX cpu optimizationAndres Salomon4-10/+23
Previously, OLPC support for the mic extensions was only enabled in the ALSA driver if CONFIG_OLPC and CONFIG_MGEODE_LX were both set. This was because the old geode GPIO code was written in a manner that assumed CONFIG_MGEODE_LX. With the new cs553x-gpio driver, this is no longer the case; as such, we can drop the requirement on CONFIG_MGEODE_LX and instead include a requirement on GPIOLIB. We use the generic GPIO API rather than the cs553x-specific API. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang1-2/+2
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-24Merge branch 'topic/misc' into for-linusTakashi Iwai1-1/+1
2009-02-05ALSA: Fix missing KERN_* prefix to printk in sound/pciTakashi Iwai1-1/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Convert to snd_card_create() in sound/pci/*Takashi Iwai1-3/+3
Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535 - Make OLPC-stuff depending on MGEODE_LXTakashi Iwai2-1/+3
The GPIO stuff for OLPC in cs5535audio_olpc.c is implemented only for Geode-LX, and enabled only when CONFIG_MGEODE_LX=y. Without this config option, the driver gets build errors. This patch adds a workaround to make it dependent on CONFIG_MGEODE_LX. Ideally, the OLPC-GPIO stuff should be implemented in a way independent from CPU type selection... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: ensure MIC Bias/Analog Input bail if not on an OLPC machineAndres Salomon1-0/+6
Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: clean up OLPC codeAndres Salomon3-8/+13
- add copyright info to _olpc.c - minor layout fixes - make Makefile more concise - silence a warning Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: turn off mic bias on OLPCs by defaultAndres Salomon1-0/+2
Always turn off mic bias; the MIC LED should never come on when the driver is first loaded. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: for OLPC, default to Analog Input being offAndres Salomon1-0/+4
Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: rename V_REFOUT control to MIC BiasAndres Salomon3-19/+87
This drops the AD1888 V_REFOUT control, and replaces it with a MIC Bias Enable control. It also moves the MIC bias enabling into a separate function. Signed-off-by: Andres Salomon <dilinger@debian.org>
2008-12-10ALSA: cs5535audio: enable OLPC's V_REFOUT bias when recordingChris Ball1-0/+16
The OLPC has a privacy light hooked up in series with the microphone's V_Ref bias. We want to activate the bias while we are capturing audio. Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: check OLPC's Analog Input status vis GPIOAndres Salomon1-7/+2
Checking the HPF register is irrelevant; HPF is secondary to the AI mode. Instead, check for Analog Input mode via GPIO. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: rename OLPC's analog input control && drop AD1888's HPFAndres Salomon1-15/+21
Previously, we had two separate controls; there's no need to have AD1888's HPF control, so drop it if we're on an OLPC machine. Also, as per Arjun's request, rename OLPC's Analog Input Switch control to "DC Mode Enable". Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: create function for setting OLPC's Analog Input modeAndres Salomon2-30/+26
Clean this stuff up a bit.. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: decouple HPF from V_REFOUT in OLPC codeAndres Salomon1-21/+4
We shouldn't be touching V_REFOUT when we toggle HPF/analog input, so just drop that code. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: drop ec_analog_input flag for OLPC stuffAndres Salomon2-11/+1
This is no longer necessary, as we're no longer doing indexed i/o commands. Signed-off-by: Andres Salomon <dilinger@debian.org>
2008-12-10ALSA: cs5535audio: invert EAPD for OLPC (newer than B3)Andres Salomon3-2/+23
Fix an audible pop described in <http://dev.laptop.org/ticket/977>. Originally based upon fixes by Mitch Bradley and Chris Ball. Signed-off-by: Andres Salomon <dilinger@debian.org>
2008-12-10ALSA: cs5535audio: Use OLPC/Geode basic infrastructureJordan Crouse1-6/+8
Use basic infrastructure code; geode_gpio* (rather than indexed i/o EC access), and do an OLPC machine check in olpc_quirk. [dilinger@debian.org: don't return failure in olpc_quirks if !OLPC] [dilinger@debian.org: drop the <B2 workarounds; those machines are EOL'd] Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andres Salomon <dilinger@debian.org>
2008-12-10ALSA: cs5535audio: OLPC analog input supportJaya Kumar4-0/+133
This is a 2nd cut at adding support for OLPC analog input. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Andres Salomon <dilinger@debian.org>
2008-12-10ALSA: cs5535audio: suspend/resume callbacks are only defined with CONFIG_PMAndres Salomon1-0/+3
snd_cs5535audio_suspend and snd_cs5535audio_resume are only defined when CONFIG_PM is set; make that clear in the header file. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: turn off PCM properly if closing the audio deviceJaya Kumar3-1/+15
As per <http://dev.laptop.org/ticket/1420>, we need to properly turn off the PCM if we're closing the device in order to save power. This also causes the MIC led to turn off properly. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-01-31[ALSA] fix cs5535 section mismatchRandy Dunlap1-1/+1
snd_cs5535audio_mixer() is only called by __devinit snd_cs5535audio_probe(), so the mixer function can also be __devinit. WARNING: vmlinux.o(.text+0xfdbba0): Section mismatch: reference to .init.data:ac97_quirks (between 'snd_cs5535audio_mixer' and 'process_bm0_irq') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] cs5535audio - Fix available sample ratesTakashi Iwai1-0/+4
The available sample rates on CS5535 depend on AC97 codec chip. Set the additional hw params limit. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai3-3/+0
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] cs5535audio: drop unused bus master stuffAndres Salomon2-51/+4
We really only care about the first two bus masters (playback and capture). There's no need to have unused BM code lying around, so let's get rid of it. If for some reason we trigger an IRQ for some BM that we're not using.. well, that warrants spitting out an error message (imo). Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cs5535audio: fix ACC_BM[x]_CMD register handlingAndres Salomon1-5/+5
According to 6.3.2.7 of the cs5535/cs5536 data sheets, the ACC_BM[x]_CMD registers are only 8 bits wide. This driver treats them as 32 bits wide, and also has bits in the wrong place. Simple fix to the definitions. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cs5535audio: update PCI device handling in suspend/resumeAndres Salomon1-2/+10
Save the PCI state before disabling the device, and add some error checking. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 16:52:58 +0000