summaryrefslogtreecommitdiffstats
path: root/sound/isa/wss
AgeCommit message (Collapse)AuthorFilesLines
2012-07-16ALSA: wss_lib: Fix resume on Yamaha OPL3-SAxOndrej Zary1-0/+4
Yamaha OPL3-SAx chips don't resume properly when playback is running - garbage is played after resume. Restoring the CS4231_PLAYBK_FORMAT register last fixes the problem. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-16ALSA: wss_lib: fix suspend/resumeOndrej Zary1-1/+0
By setting SNDRV_PCM_INFO_RESUME, wss_lib claims that it can restore the card state fully on resume. But in fact, it can't as DMA is not restored so any playback/capture running during suspend will fail to continue after resume. Remove SNDRV_PCM_INFO_RESUME flag from pcm info field to fix the problem. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31sound: Add module.h to the previously silent sound usersPaul Gortmaker1-0/+1
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-22sound: irq: Remove IRQF_DISABLEDYong Zhang1-1/+1
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2009-12-11ALSA: opti93x: move controls definitions to opti93x driverKrzysztof Helt1-65/+15
Move OPTi93x controls definitions to the opti93x driver from the common wss-lib library module. These controls are used only by the opti93x driver. Also, fix capture source names. They are the same as opl3sa2 names. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: cs4236: update control namesKrzysztof Helt1-4/+4
Update control names to be more closer to their meaning. Change the "Mono" name to the "Beep" as this line is usually used to forward the PC beeper signal to sound card's output. Update names for both cs423x and wss. Clean up cs4235 controls according to the cs4235 doc. Rename some of the cs4235 controls to be consistent with the cs4236's ones. Also, delete one misnamed cs4231 register define. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-05ALSA: cs4236: detect chip in one passKrzysztof Helt1-2/+1
The cs4236 was two step detection with call to the snd_wss_free() between two steps. The snd_wss_free() did not free a sound device created in the snd_wss_create(). This caused an OOPS during module removal as the same sound device was released twice. The same OOPS happened if the cs4236 module loading failed. Fix this by adapting the snd_cs4236_create() to correctly work with chips less capable then cs4236. The snd_cs4236_create() behaves the same as the snd_wss_create() if the chip is less capable than the cs4236. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: wss: reuse CS4231 controls for AD1848Krzysztof Helt1-56/+23
The C4231 control set is a superset of the AD1848 control set so reuse the CS4231 controls definitions for the AD1848. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-10ALSA: wss: convert CS4231 mixer to dB scaleKrzysztof Helt1-17/+26
Convert CS4231 mixer to dB scale after AD1848 mixer. Also, add missing microphone boost control for the AD1848 and correct wrong bits for loopback volume on the AD1848. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-24Merge branch 'topic/sscape-fix' into for-linusTakashi Iwai1-28/+53
2009-02-16ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detectionKrzysztof Helt1-1/+2
cs4232 and cs4236 driver merge to solve PnP BIOS detection. Also, the patch adds recognition if the chip is cs4236b+ or earlier part. This unifies drivers for both cs4232 and cs4236+ chips. It allows to use the PnP BIOS detection for the cs4236+ chips. Previously, only the snd-cs4232 could be detected by the PnP BIOS. The cs4232+ cards reports two separate PnP BIOS ids. The patch adds search for the second id to find out resources assigned to a control port. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: wss - Add missing KERN_* prefix to printkTakashi Iwai1-23/+53
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-17ALSA: wss-lib: remove "pops" before each played soundKrzysztof Helt1-28/+13
A WSS codec is autocalibrated each time before playing sound. Do only one calibration during codec initialization. Complete snd_wss_calibrate_mute to mute loopback volume as well. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-11ALSA: wss-lib: move AD1845 frequency setting into wss-libKrzysztof Helt1-0/+40
This is required to allow the sscape driver to autodetect installed codec. Also, do not create a timer if detected codec has no hardware timer (e.g. AD1848). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Rene Herman Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-25ALSA: wss_lib: do not mess mixer settings during probeKrzysztof Helt1-5/+5
Use the wss_dout function which does not mess shadowed register values during chip probing. Otherwise, user ends up with stupid mixer settings after driver loading. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: wss_lib: snd_wss_calibrate_mute improvementKrzysztof Helt1-13/+13
Mute sound by setting mute bit without setting volume to 0. It makes both source code and binary shorter. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in sound/isa/*Takashi Iwai1-2/+4
Kill snd_assert() in sound/isa/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: wss_lib: missing closing brace in (ifdeffed out) debug function.Rene Herman1-1/+1
Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: rework snd_ad1848_probe()Rene Herman1-64/+69
Make snd_ad1848_probe() easier to follow. With an exception for only trying once as soon as the codec is out of init (which should be all that's needed) the detection logic should be unchanged. Signed-off-by: Rene Herman <rene.herman@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: fix AZT2320 probe.Rene Herman1-5/+7
After the transition from cs4321_lib to wss_lib, azt2320 probe visits snd_ad1848_probe during detection. It expects register 0 (LEFT_INPUT) to be able to retain the value 0xaa during detection but AZT2320 does not support MIC gain meaning it reads back as 0x8a instead. Signed-off-by: Rene Herman <rene.herman@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: remove second mutexes initializationKrzysztof Helt1-4/+0
Remove initializations of spinlock and mutexes which are done earlier in snd_wss_new(). The snd_wss_new() is called from snd_wss_create(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: fix opti93x capture formats limitationsKrzysztof Helt1-2/+4
Limit opti93x cards capture formats to only linear ones. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss detection code instead of ad1848 oneKrzysztof Helt1-30/+120
Use the wss detection code and kill the ad1848 library. The library is fully assimilated into the new wss library. This required reworking of the AD1848 family code so the code is changed to correctly detect chips from the AD1848 and CS4231 families. I have tested it on following cards: Gallant SC-6600 (codec: AD1848, driver: snd-sc6600) SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape) SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy) Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x) Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x) Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236) Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330) Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232) Sound playback and recording works on all these cards. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss pcm code instead of ad1848 oneKrzysztof Helt1-26/+100
Use the wss pcm code and kill the ad1848 pcm code. The AD1848 chip is much slower than CS4231 chips so the waiting loop was increased 100x (10x is not enough). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss mixer code instead of ad1848 oneKrzysztof Helt1-5/+56
Use the wss mixer code and kill the ad1848 mixer code. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: rename cs4321_foo to wss_fooKrzysztof Helt1-546/+701
Rename functions and structures from the former cs4321_lib to names more corresponding with the new name: wss_lib. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: rename cs4231.h into wss.hKrzysztof Helt1-1/+1
Rename file include/sound/cs4231.h into include/sound/wss.h Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: move cs4231_lib into wss_libKrzysztof Helt2-0/+1955
Move the file sound/isa/cs423x/cs4231_lib.c into sound/isa/cs423x/wss_lib.c This is the first step toward merging all libraries for Windows Sound System compatible chips into a single library. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 20:53:33 +0000