summaryrefslogtreecommitdiffstats
path: root/sound/hda/local.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-13Merge tag 'asoc-v4.15' of ↵Takashi Iwai1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model thanks to some dedicated and persistent work from Robert Jarzmik. - Continued work from Morimoto-san on moving us towards being able to use components for everything. - Lots of cleanups for the Intel platform code, including support for their open source audio firmware. - Support for scaling MCLK with sample rate in simple-card. - Support for AMD Stoney platform.
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19ALSA: hda: Avoid racy recreation of widget kobjectsTakashi Iwai1-0/+2
The refresh of HD-audio widget sysfs kobjects via snd_hdac_refresh_widget_sysfs() is slightly racy. The driver recreates the whole tree from scratch after deleting the whole. When CONFIG_DEBUG_KOBJECT_RELEASE option is used, kobject release doesn't happen immediately but delayed, while the re-creation of the same named kobject happens soon after invoking kobject_put(). This may end up with the conflicts of duplicated kobjects, as found in the bug report below. In this patch, we take another approach to refresh the tree: instead of recreating the whole tree, just add the new nodes and delete the non-existing nodes. Since the refresh happens only once at initialization, no longer race would happen. Along with the code change, merge snd_hdac_refresh_widget_sysfs() with the existing snd_hdac_refresh_widgets() with an additional bool flag for simplifying the code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197307 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-28ALSA: hda - add helper to get channels from cap bitsSubhransu S. Prusty1-0/+10
This helper is copied from legacy hda driver. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-23ALSA: hda - Add widget sysfs treeTakashi Iwai1-0/+4
This patch changes the sysfs files assigned to the codec device on the bus which were formerly identical with hwdep sysfs files. Now it shows only a few core parameter, vendor_id, subsystem_id, revision_id, afg, mfg, vendor_name and chip_name. In addition, now a widget tree is added to the bus device sysfs directory for showing the widget topology and attributes. It's just a flat tree consisting of subdirectories named as the widget NID including various attributes like widget capability bits. The AFG (usually NID 0x01) is always found there, and it contains always amp_in_caps, amp_out_caps and power_caps files. Each of these attributes show a single value. The rest are the widget nodes belonging to that AFG. Note that the child node might not start from 0x02 but from another value like 0x0a. Each child node may contain caps, pin_caps, amp_in_caps, amp_out_caps, power_caps and connections files. The caps (representing the widget capability bits) always contain a value. The rest may contain value(s) if the attribute exists on the node. Only connections file show multiple values while other attributes have zero or one single value. An example of ls -R output is like below: % ls -R /sys/bus/hdaudio/devices/hdaudioC0D0/ /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/: 01/ 04/ 07/ 0a/ 0d/ 10/ 13/ 16/ 19/ 1c/ 1f/ 22/ 02/ 05/ 08/ 0b/ 0e/ 11/ 14/ 17/ 1a/ 1d/ 20/ 23/ 03/ 06/ 09/ 0c/ 0f/ 12/ 15/ 18/ 1b/ 1e/ 21/ /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/01: amp_in_caps amp_out_caps power_caps /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/02: amp_in_caps amp_out_caps caps connections pin_caps pin_cfg power_caps /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/03: ..... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23ALSA: hda - Move a part of hda_codec stuff into hdac_deviceTakashi Iwai1-0/+19
Now some codes and functionalities of hda_codec struct are moved to hdac_device struct. A few basic attributes like the codec address, vendor ID number, FG numbers, etc are moved to hdac_device, and they are accessed like codec->core.addr. The basic verb exec functions are moved, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>