summaryrefslogtreecommitdiffstats
path: root/sound/firewire/oxfw
AgeCommit message (Collapse)AuthorFilesLines
2019-02-06ALSA: firewire: Remove superfluous snd_info_register() callsTakashi Iwai1-10/+2
The calls of snd_info_register() are superfluous and should be avoided at the procfs creation time. They are called at the end of the whole initialization via snd_card_register(). This patch drops such superfluous calls. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-13ALSA: oxfw: add support for APOGEE duet FireWireTakashi Sakamoto1-0/+8
This commit adds support for APOGEE duet FireWire, launched 2007, already discontinued. This model uses Oxford Semiconductor FW971 as its communication engine. Below is information on Configuration ROM of this unit. The unit supports some AV/C commands defined by Audio subunit specification and vendor dependent commands. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 42949742248, 'cmc': False, 'cyc_clk_acc': 255, 'generation': 0, 'imc': False, 'isc': True, 'link_spd': 3, 'max_ROM': 0, 'max_rec': 64, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 122333], ['DESCRIPTOR', 'Duet'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 122333], ['DESCRIPTOR', 'Duet']]]]} Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10ALSA: firewire: simplify cleanup process when failing to register sound cardTakashi Sakamoto1-21/+5
In former commits, .private_free callback releases resources just for data transmission. This release function can be called without the resources are actually allocated in error paths. This commit applies a small refactoring to clean up codes in error paths. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10ALSA: firewire: release reference count of firewire unit in .remove callback ↵Takashi Sakamoto1-6/+3
of bus driver In a previous commit, drivers in ALSA firewire stack blocks .remove callback of bus driver. This enables to release members of private data in the callback after releasing device of sound card. This commit simplifies codes to release the members. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10ALSA: firewire: block .remove callback of bus driver till all of ALSA ↵Takashi Sakamoto1-2/+2
character devices are released At present, in .remove callback of bus driver just decrease reference count of device for ALSA card instance. This delegates release of the device to a process in which the last of ALSA character device is released. On the other hand, the other drivers such as for devices on PCIe are programmed to block .remove callback of bus driver till all of ALSA character devices are released. For consistency of behaviour for whole drivers, this probably confuses users. This commit takes drivers in ALSA firewire stack to imitate the above behaviour. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04ALSA: oxfw: use managed-resource to maintain cache of stream formatsTakashi Sakamoto2-19/+8
ALSA oxfw driver allocates memory objects for cache of stream formats. The objects are used to maintain packet streaming by components for ALSA rawMIDI/PCM interface. They can be released as managed-resource of 'struct snd_card.card_dev'. This commit uses managed-resource of the sound card device for this purpose. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04ALSA: oxfw: use managed-resource to maintain model-specific dataTakashi Sakamoto3-7/+6
ALSA oxfw driver allocates memory objects for data specific to some models. These objects are used to maintain functionalities specific to the models for ALSA rawMIDI/control interfaces. They can be released as managed-resource of 'struct snd_card.card_dev'. This commit uses managed-resource of the sound card device for this purpose. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04ALSA: firewire: use managed-resource of fw unit device for private dataTakashi Sakamoto1-7/+4
At present, private data of each driver in ALSA firewire stack is allocated/freed by kernel slab allocator for corresponding unit on IEEE 1394 bus. In this case, resource-managed slab allocator is available to release memory object automatically just before releasing device structure for the unit. This idea can prevent runtime from memory leak due to programming mistakes. This commit uses the allocator for the private data. These drivers already use reference counter to maintain lifetime of device structure for the unit by a pair of fw_unit_get()/fw_unit_put(). The private data is safely released in a callback of 'struct snd_card.private_free(). Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-17ALSA: oxfw: fix memory leak of discovered stream formats at error pathTakashi Sakamoto1-0/+7
After finishing discover of stream formats, ALSA OXFW driver has memory leak of allocated memory object at error path. This commit releases the memory object at the error path. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-17ALSA: oxfw: fix memory leak for model-dependent data at error pathTakashi Sakamoto1-0/+2
After allocating model-dependent data, ALSA OXFW driver has memory leak of the data at error path. This commit releases the data at the error path. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13ALSA: oxfw: fix memory leak of private dataTakashi Sakamoto1-0/+1
Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-18ALSA: pcm: Nuke snd_pcm_lib_mmap_vmalloc()Takashi Iwai1-2/+0
snd_pcm_lib_mmap_vmalloc() was supposed to be implemented with somewhat special for vmalloc handling, but in the end, this turned to just the default handler, i.e. NULL. As the situation has never changed over decades, let's rip it off. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-28sound: Use octal not symbolic permissionsJoe Perches1-1/+1
Convert the S_<FOO> symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...> Miscellanea: o Wrapped one multi-line call to a single line Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-22ALSA: oxfw: use match_string() helperYisheng Xie1-7/+1
match_string() returns the index of an array for a matching string, which can be used intead of open coded variant. Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-1/+1
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27sound: annotate ->poll() instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-6/+6
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-22ALSA: firewire: add const qualifier to identifiers for read-only symbolsTakashi Sakamoto1-6/+5
Drivers in ALSA firewire stack still includes some symbols which can be moved to a section for read-only symbols. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-08ALSA: firewire: arrange common PCM info/constraints for AMDTP engine ↵Takashi Sakamoto1-20/+0
applications In ALSA firewire stack, 8 drivers uses IEC 61883-1/6 engine for data transmission. They have common PCM info/constraints and duplicated codes. This commit unifies the codes into fireiwre-lib. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-07ALSA: firewire: process packets in 'struct snd_pcm_ops.ack' callbackTakashi Sakamoto1-0/+16
In recent commit for ALSA PCM core, some arrangement is done for 'struct snd_pcm_ops.ack' callback. This is called when appl_ptr is explicitly moved in intermediate buffer for PCM frames, except for some cases described later. For drivers in ALSA firewire stack, usage of this callback has a merit to reduce latency between time of PCM frame queueing and handling actual packets in recent isochronous cycle, because no need to wait for software IRQ context from isochronous context of OHCI 1394. If this works well in a case that mapped page frame is used for the intermediate buffer, user process should execute some commands for ioctl(2) to tell the number of handled PCM frames in the intermediate buffer just after handling them. Therefore, at present, with a combination of below conditions, this doesn't work as expected and user process should wait for the software IRQ context as usual: - when ALSA PCM core judges page frame mapping is available for status data (struct snd_pcm_mmap_status) and control data (struct snd_pcm_mmap_control). - user process handles PCM frames by loop just with 'snd_pcm_mmap_begin()' and 'snd_pcm_mmap_commit()'. - user process uses PCM hw plugin in alsa-lib to operate I/O without 'sync_ptr_ioctl' option. Unfortunately, major use case include these three conditions. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-22ALSA: firewire: remove support for 16 bit PCM samples in playback substreamTakashi Sakamoto1-4/+0
In IEC 61883-6, AM824 is described as format of data block. In this format, one data block consists of several data channels, which is aligned to 32 bit. One data channel has 8 bit label field and 24 bit data field. PCM frames are transferred in Multi Bit Linear Audio (MBLA) data channel. This channel can include 16/20/24 bit PCM sample. As long as I know, models which support IEC 61883-1/6 doesn't allow to switch bit length of PCM sample in MBLA data channel. They always transmit/receive PCM frames of 24 bit length. This can be seen for the other models which support protocols similar to IEC 61883-1/6. On the other hand, current drivers for these protocols supports 16 bit length PCM sample in playback substream. In this case, PCM sample is put into the MBLA data channel with 8 bit padding in LSB side. Although 16 bit PCM sample is major because it's in CD format, this doesn't represent device capability as is. This commit removes support for 16 bit PCM samples in playback substream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12Merge branch 'for-linus' into for-nextTakashi Iwai1-2/+2
2017-04-05ALSA: firewire-lib/bebob/oxfw: improve response evaluation for AV/C commandsTakashi Sakamoto1-3/+9
In ALSA firewire stack, some AV/C commands are supported, including vendor's extensions. Drivers includes response parser of each command, according to its requirements, while the parser is written with loose fashion in two points; error check and length check. This doesn't cause any issues such as kernel corruption, but should be improved. This commit modifies evaluations of return value on each parsers. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05ALSA: oxfw: fix regression to handle Stanton SCS.1m/1dTakashi Sakamoto1-2/+2
At a commit 6c29230e2a5f ("ALSA: oxfw: delayed registration of sound card"), ALSA oxfw driver fails to handle SCS.1m/1d, due to -EBUSY at a call of snd_card_register(). The cause is that the driver manages to register two rawmidi instances with the same device number 0. This is a regression introduced since kernel 4.7. This commit fixes the regression, by fixing up device property after discovering stream formats. Fixes: 6c29230e2a5f ("ALSA: oxfw: delayed registration of sound card") Cc: <stable@vger.kernel.org> # 4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-0/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14ALSA: oxfw: enclose identifiers referred by single function for scs1x featureTakashi Sakamoto1-6/+6
Some identifiers are referred just by one functions. In this case, they can be put into the function definition. This brings two merits; readers can easily follow codes related to the identifiers, developers are free from name conflict. This commit moves such identifiers to each function definition. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-12ALSA: firewire: Constify snd_rawmidi_opsTakashi Iwai2-4/+4
Now snd_rawmidi_ops is maintained as a const pointer in snd_rawmidi, we can constify the definitions. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05ALSA: oxfw: enclose identifiers referred by single functionTakashi Sakamoto1-14/+12
Some identifiers are referred just by one functions. In this case, they can be put into the function definition. This brings two merits; readers can easily follow codes related to the identifiers, developers are free from name conflict. This commit moves such identifiers to each function definition. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-03ALSA: oxfw: add support for Mackie Onyx 1640iTakashi Sakamoto1-0/+1
As of kernel 4.10, ALSA OXFW driver has no entry for Onyx 1640i produced by Mackie (Loud Technologies). This commit supplement it. I note that there're two models produced by Mackie (Loud Technologies), which have the same name 'Onyx 1640i'. The former model based on OXFW970, the latter model based on Dice. This is probably due to low quality of communication of OXFW series. Additionally, the tester reports his or her experiences to get unexpected result at higher sampling transmission frequency as 88.2/96.0 kHz. We didn't have further investigation yet[0]. $ ./linux-firewire-utils/src/crpp < config_rom ROM header and bus information block ----------------------------------------------------------------- 400 042525ce bus_info_length 4, crc_length 37, crc 9678 404 31333934 bus_name "1394" 408 20ff5003 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 5 (64) 40c 000ff205 company_id 000ff2 | 410 00000fcf device_id 0500000fcf | EUI-64 000ff20500000fcf root directory ----------------------------------------------------------------- 414 0006c1b7 directory_length 6, crc 49591 418 03000ff2 vendor 41c 8100000a --> descriptor leaf at 444 420 17001640 model 424 81000011 --> descriptor leaf at 468 428 0c0083c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 00040b97 directory_length 4, crc 2967 434 1200a02d specifier id: 1394 TA 438 13010001 version: AV/C 43c 17001640 model 440 81000010 --> descriptor leaf at 480 descriptor leaf at 444 ----------------------------------------------------------------- 444 0008a886 leaf_length 8, crc 43142 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 4c6f7564 "Loud" 454 20546563 " Tec" 458 686e6f6c "hnol" 45c 6f676965 "ogie" 460 7320496e "s In" 464 632e0000 "c." descriptor leaf at 468 ----------------------------------------------------------------- 468 00059fcf leaf_length 5, crc 40911 46c 00000000 textual descriptor 470 00000000 minimal ASCII 474 4f6e7978 "Onyx" 478 20313634 " 164" 47c 30690000 "0i" descriptor leaf at 480 ----------------------------------------------------------------- 480 00059fcf leaf_length 5, crc 40911 484 00000000 textual descriptor 488 00000000 minimal ASCII 48c 4f6e7978 "Onyx" 490 20313634 " 164" 494 30690000 "0i" [0]: [FFADO-user] Mackie 1640i issues (finer details) https://sourceforge.net/p/ffado/mailman/message/35229260/ Tested-by: Seth O'Bannion <saobannion@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-02ALSA: firewire: constify snd_pcm_ops structuresJulia Lawall1-2/+2
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-10ALSA: firewire-lib: enable the same feature as CIP_SKIP_INIT_DBC_CHECK flagTakashi Sakamoto1-2/+1
In former commit, drivers in ALSA firewire stack always starts IT context before IR context. If IR context starts after packets are transmitted by peer unit, packet discontinuity may be detected because the context starts in the middle of packet streaming. This situation is rare because IT context usually starts immediately. However, it's better to solve this issue. This is suppressed with CIP_SKIP_INIT_DBC_CHECK flag. This commit enables the same feature as CIP_SKIP_INIT_DBC_CHECK. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-31ALSA: oxfw: delayed registration of sound cardTakashi Sakamoto2-53/+101
Some oxfw based units tends to fail asynchronous communication when IEEE 1394 bus is under bus-reset state. When registering sound card instance at unit probe callback, userspace applications can be involved to the state. This commit postpones the registration till the bus is calm. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-28ALSA: oxfw: remove needless member from private structureTakashi Sakamoto1-1/+0
In former commit, 'struct device_info' is obsoleted, whereas private structure still keeps a pointer to it. This commit remove the member. d6ce6bbd7d83('ALSA: oxfw: rename a structure so that it means backward compatibility to old drivers') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-24ALSA: oxfw: discontinue MIDI substream for scs1x at transaction failureTakashi Sakamoto1-3/+10
With a previous commit, ALSA oxfw driver retries transferring MIDI messages at transaction failure for scs1x. On the other hand, there're fatal transaction error. Then, no MIDI messages reach to the unit anymore. In this case, MIDI substream should be terminated. This commit stops MIDI transmission after the fatal error occurs. Unfortunately, unlike ALSA PCM functionality, ALSA rawmidi core has no feature to discontinue MIDI substream runtime in kernel side, thus this commit just stops MIDI transmission without notifying it to userspace. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-24ALSA: oxfw: retry MIDI transferring for scs1x at transaction failureTakashi Sakamoto1-3/+11
Currently, ALSA oxfw driver has a TODO to retry MIDI transferring at transaction failure. This commit achieves it. Current implementation uses snd_rawmidi_transmit() to transfer messages, thus the target MIDI messages are not in buffer when transaction failure is detected. Although we cannot use a pair of snd_rawmidi_transmit_peek() and snd_ramwidi_transmit_ack(), the messages are still in scs1x specific structure and the data is available for retries. This commit adds a member to the structure for the length of buffered messages, and uses the value again at retries. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-18ALSA: oxfw: use workqueue instead of tasklet for scs1xTakashi Sakamoto1-6/+6
This commit replaces tasklet with workqueue for scs1x functionality of ALSA oxfw driver. This driver transfers MIDI message specific for SCS.1m and SCS.1d. This task is currently done in software IRQ context of tasklet. In a view of system, this context is limited resources and some important drivers (at least, more important than ALSA oxfw driver) use the context as its bottom-harf. If the work to transfer MIDI messages is done within a time, it's better to use the other context for the work. Actually, with recent CPUs, the work will be scheduled within a time. This is a reason of this commit. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: add stream format quirk for SCS.1 modelsTakashi Sakamoto1-1/+9
As long as I investigate SCS.1m, this model reports to transfer/receive PCM data channels/MIDI conformant data channels in tx/rx AMDTP packet. There's a contradiction that this model actually has no analog/digital capture port for PCM frames and no physical MIDI ports. I guess that SCS.1d also has the contradiction. This model has no analog/digital ports for PCM frames and no physical MIDI ports, thus it requires no streaming functionality. This commit adds some modification codes to handle the contradiction, as much as possible. Unfortunately, this module adds one PCM playback substream for SCS.1d so as SCS.1m. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: obsolete scs1x moduleTakashi Sakamoto1-0/+26
Now ALSA oxfw driver gains functionalities which scs1x module has. This commit obsoletes the scs1x module, and adds a line of MODULE_ALIAS to load oxfw module instead of scs1x module. In scs1x module, the name of 'shortname' field is fixed as 'SCS1x'. This field is used to name MIDI ports for both of SCS.1m and SCS.1d. This is not good because typically some SCS.1m and SCS.1d are used in the same system. It's better to distinguish them according to name of the ports. This commit applies model name in config ROM to the 'shortname'. For the name of 'driver' and 'longname', this commit uses the same way applied to the other models. This change may not bring disadvantages to users because userspace applications use ALSA rawmidi or seq interface and these interfaces are not influenced by them directly. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: add MIDI playback port for SCS.1 modelsTakashi Sakamoto1-2/+45
This commit adds MIDI playback ports so that scs1x driver has. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: copy handlers of asynchronous transaction for MIDI playbackTakashi Sakamoto1-0/+161
This commit copies some functions of asynchronous transactions for MIDI playback, to merge scs1x module. The features of payload in asynchronous transaction are the same as captured MIDI messages. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: add MIDI capture port for SCS.1 modelsTakashi Sakamoto1-1/+33
This commit adds MIDI capture so that scs1x driver has. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: copy handlers of asynchronous transaction for MIDI captureTakashi Sakamoto1-1/+82
This commit copies some functions of asynchronous transactions for MIDI capture, to merge scs1x module. The features of payload in asynchronous transaction are: * System exclusive messages for SCS.1 are encoded without ID data. In this encoding scheme, 4 bits in LSB are available. The bits are squashed in payload byte. Thus, one payload byte transfers two MIDI messages. * The first byte of payload byte means: * 0x00: depending on second payload byte * 0xf9: including escaped system exclusive messages for SCS.1, up to 3 byte (= 6 MIDI messages) * the others: including MIDI 1.0 messages * the others: including escaped system exclusive messages for SCS.1, up to 64 bytes Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: allocate own address region for SCS.1 seriesTakashi Sakamoto2-1/+65
When physical controls on SCS.1 models are operated, the models transfer MIDI messages in asynchronous transactions on IEEE 1394 bus. The models have a register to have an address for the transactions, and drivers can register own address for this purpose. This commit keeps a region of address, registers it and adds a handler for the transactions. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: add scs1x layerTakashi Sakamoto4-3/+30
Stanton Controllers and Systems 1 (SCS.1) series is supported by ALSA scs1x driver. This driver just supports MIDI functionality. On the other hand, models in this series are based on OXFW971 and ALSA OXFW driver can support them. SCS.1 series has MIDI functionality to control its surface state such as LED lighting. When operating physical knobs and faders, the models generate MIDI messages. These MIDI messages are transferred by asynchronous transactions. These transactions are really model-specific and ALSA OXFW driver requires the functionality so as scs1x module implements. This commit adds scs1x layer as a preparation to merge scs1x driver to oxfw driver. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: rename a structure so that it means backward compatibility to ↵Takashi Sakamoto2-10/+10
old drivers In former commits, some model-specific members are split from the structure. The structure is just to keep names for compatibility to old drivers. This commit arranges name of the structure and localize it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: move model-specific parameters from common structureTakashi Sakamoto3-42/+39
In previous commit, some members are moved from 'struct snd_oxfw' because they're model-specific. There are also the other model-specific parameters in 'struct device_info'. This commit moves these members to model-specific structure. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: move model-specific members from common structureTakashi Sakamoto2-19/+34
Currently, 'struct snd_oxfw' has some members for models supported by old firewire-speakers driver, while these members are useless to the other models. This commit allocates new memory block and moves these members to model-specific structure. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22ALSA: oxfw: enable to keep memory block for model-specific structureTakashi Sakamoto2-0/+2
ALSA oxfw driver should have backward compatibility to old firewire-speakers driver. Additionally, in future commit, scs1x driver will be merged. It's nice to add a pointer to have a memory block for model-specific structures. This commit adds a member to 'struct snd_oxfw' for this aim. Deallocation is done at freeing ALSA card structure. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-15ALSA: oxfw: gather model-dependent conditions to a functionTakashi Sakamoto1-11/+18
Adding control elements is just for models supported by old firewire-speakers modules. The processing should be in a function to add model-dependent quirk. This commit moves the codes to the function. As a result, the function should handle error state, thus this commit also changes prototype of the function. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-15ALSA: oxfw: reuse driver entry to detect quirksTakashi Sakamoto2-16/+24
Currently, assignment to model-dependent quirk is corresponding to asynchronous transactions on IEEE 1394 bus. This is also achieved with device entry. This commit changes the processing of model-dependent quirk with the entry. As a result, the transactions are sent only for Loud models. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 11:40:20 +0000