summaryrefslogtreecommitdiffstats
path: root/sound/firewire/dice
AgeCommit message (Collapse)AuthorFilesLines
2021-06-07ALSA: dice: cease from delayed card registrationTakashi Sakamoto2-94/+48
The delayed registration of sound card instance brings less benefit than complication of kobject management. This commit ceases from it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210607081250.13397-5-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-01ALSA: dice: perform sequence replay for media clock recoveryTakashi Sakamoto1-1/+5
This commit takes ALSA dice driver to perform sequence replay for media clock recovery. Unlike the other types of device, DICE-based devices interpret the value of syt field of CIP header in rx packets as presentation time for audio playback, thus it's required for driver to compute value for outgoing packet adequate to the device. It's done by media clock recovery by handling tx packets. The device starts packet transmission immediately at operation to GLOBAL_ENABLE thus on-the-fly mode is not required. DICE ASICs supports several pairs of isochronous packet streams. Actually, maximum two pairs of streams are supported by devices. We have three cases regarding to the number of streams: 1. a pair of streams 2. two tx packet streams and one rx packet streams 3. one tx packet streams and two rx packet streams 4. two pair of streams The decision of playback timing is slightly different in the four cases. In the case 1, sequence replay in the pair results in suitable playback timing. In the case 2, sequence replay from the first tx packet stream to rx packet stream results in suitable playback timing. In the case 3, sequence replay from tx packet stream to all of rx packet stream results in suitable playback timing. Furthermore, the cycle to start receiving packets should be the same between all rx packet streams. In the case 4, sequence replay in each pair results in suitable playback timing. Furthermore, the cycle to start receiving packets should be the same between all rx packet streams. The sequence replay is tested with below models: * For case 1: * TC Electronic Konnekt 24d (DiceII) * TC Electronic Konnekt 8 (DiceII) * TC Electronic Konnekt Live (DiceII) * TC Electronic Impact Twin (DiceII) * TC Electronic Digital Konnekt X32 (DiceII) * TC Electronic Desktop Konnekt 6 (TCD2220) * Solid State Logic Duende Classic (DiceII) * Solid State Logic Duende Mini (DiceII) * PreSonus FireStudio Project (TCD2210) * PreSonus FireStudio Mobile (TCD2210) * Lexicon I-ONIX FW810s (TCD2220) * Avid Mbox 3 Pro (TCD2220) * For case 2 (but case 1 depends on sampling transfer frequency): * Alesis iO 26 (DiceII) * Alesis iO 14 (DiceII) * Alesis MultiMix 12 FireWire (DiceII) * Focusrite Saffire Pro 26 (TCD2220) * For case 3 (but case 1 depends on sampling transfer frequency): * M-Audio Profire 610 (TCD2220) * Loud Technology Mackie Onyx Blackbird (TCD2210) * For case 4: * TC Electronic Studio Konnekt 48 (DiceII + TCD2220) * PreSonus FireStudio (DiceII) * M-Audio Profire 2626 (TCD2220) * Focusrite Liquid Saffire 56 (TCD2220) * Focusrite Saffire Pro 40 (TCD2220) Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210601081753.9191-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-01ALSA: dice: wait just for NOTIFY_CLOCK_ACCEPTED after GLOBAL_CLOCK_SELECT ↵Takashi Sakamoto2-23/+8
operation NOTIFY_CLOCK_ACCEPTED notification is always generated as a result of GLOBAL_CLOCK_SELECT operation, however NOTIFY_LOCK_CHG notification doesn't, as long as the selected clock is already configured. In the case, ALSA dice driver waits so long. It's inconvenient for some devices to lock to the sequence of value in syt field of CIP header in rx packets. This commit wait just for NOTIFY_CLOCK_ACCEPTED notification by reverting changes partially done by two commits below: * commit fbeac84dbe9e ("ALSA: dice: old firmware optimization for Dice notification") * commit aec045b80d79 ("ALSA: dice: change notification mask to detect lock status change") I note that the successful lock to the sequence of value in syt field of CIP header in rx packets results in NOTIFY_EXT_STATUS notification, then EXT_STATUS_ARX1_LOCKED bit stands in GLOBAL_EXTENDED_STATUS register. The notification can occur enough after receiving the batch of rx packets. When the sequence doesn't include value in syt field of CIP header in rx packets adequate to the device, the notification occurs again and the bit is off. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210601081753.9191-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-28ALSA: firewire-lib: transfer rx packets on-the-fly when replayingTakashi Sakamoto1-1/+1
Models in below series start transmission of packet after receiving the sequence of packets: * Digidesign Digi00x family * RME Fireface series Additionally, models in Tascam FireWire series start multiplexing PCM frames into packets enough after receiving packets. It's required to transfer packets on-the-fly for the above models according to nominal sampling transfer frequency before starting sequence replay. This commit allows drivers to decide whether the engine transfers packet on-the-fly or not. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210527122611.173711-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-28ALSA: firewire-lib: add replay target to cache sequence of packetTakashi Sakamoto1-1/+1
In design of audio and music unit in IEEE 1394 bus, feedback of effective sampling transfer frequency (STF) is delivered by packets transferred from device. The devices supported by ALSA firewire stack are categorized to three groups regarding to it. * Group 1: * Echo Audio Fireworks board module * Oxford Semiconductor OXFW971 ASIC * Digidesign Digi00x family * Tascam FireWire series * RME Fireface series * Group 2: * BridgeCo. DM1000/DM1100/DM1500 ASICs for BeBoB solution * TC Applied Technologies DICE ASICs * Group 3: * Mark of the Unicord FireWire series In group 1, the effective STF is determined by the sequence of the number of events per packet. In group 2, the sequence of presentation timestamp expressed in syt field of CIP header is interpreted as well. In group 3, the presentation timestamp is expressed in source packet header (SPH) of each data block. I note that some models doesn't take care of effective STF with large internal buffer. It's reasonable to name it as group 0: * Group 0 * Oxford Semiconductor OXFW970 ASIC The effective STF is known to be slightly different from nominal STF for all of devices, and to be different between the devices. Furthermore, the effective STF is known to be shifted for long-period transmission. This makes it hard for software to satisfy the effective STF when processing packets to the device. The effective STF is deterministic as a result of analyzing the batch of packet transferred from the device. For the analysis, caching the sequence of parameter in the packet is required. This commit adds an option so that AMDTP domain structure takes AMDTP stream structure to cache the sequence of parameters in packet transferred from the device. The parameters are offset ticks of syt field against the cycle to receive the packet and the number of data blocks per packet. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210527122611.173711-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-20ALSA: firewire-lib: change waking up timing to process packetsTakashi Sakamoto1-11/+4
When starting AMDTP domain, tasks in process context yields running CPU till all of isochronous context get callback, with an assumption that it's OK to process content of packet. However several isochronous cycles are skipped to transfer rx packets, or the content of rx packets are dropped, to manage the timing to start processing the packets. This commit changes the timing for tasks in process context to wake up when processing content of packet is actually ready. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210520040154.80450-9-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-18ALSA: dice: fix stream format for TC Electronic Konnekt Live at high ↵Takashi Sakamoto1-2/+2
sampling transfer frequency At high sampling transfer frequency, TC Electronic Konnekt Live transfers/receives 6 audio data frames in multi bit linear audio data channel of data block in CIP payload. Current hard-coded stream format is wrong. Cc: <stable@vger.kernel.org> Fixes: f1f0f330b1d0 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-18ALSA: dice: disable double_pcm_frames mode for M-Audio Profire 610, 2626 and ↵Takashi Sakamoto4-4/+29
Avid M-Box 3 Pro ALSA dice driver detects jumbo payload at high sampling transfer frequency for below models: * Avid M-Box 3 Pro * M-Audio Profire 610 * M-Audio Profire 2626 Although many DICE-based devices have a quirk at high sampling transfer frequency to multiplex double number of PCM frames into data block than the number in IEC 61883-1/6, the above devices are just compliant to IEC 61883-1/6. This commit disables the mode of double_pcm_frames for the models. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210518012510.37126-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-14ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26Takashi Sakamoto1-1/+1
Alesis iO 26 FireWire has two pairs of digital optical interface. It delivers PCM frames from the interfaces by second isochronous packet streaming. Although both of the interfaces are available at 44.1/48.0 kHz, first one of them is only available at 88.2/96.0 kHz. It reduces the number of PCM samples to 4 in Multi Bit Linear Audio data channel of data blocks on the second isochronous packet streaming. This commit fixes hardcoded stream formats. Cc: <stable@vger.kernel.org> Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-12ALSA: dice: fix null pointer dereference when node is disconnectedTakashi Sakamoto1-3/+2
When node is removed from IEEE 1394 bus, any transaction fails to the node. In the case, ALSA dice driver doesn't stop isochronous contexts even if they are running. As a result, null pointer dereference occurs in callback from the running context. This commit fixes the bug to release isochronous contexts always. Cc: <stable@vger.kernel.org> # v5.4 or later Fixes: e9f21129b8d8 ("ALSA: dice: support AMDTP domain") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210312093407.23437-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-15ALSA: dice: add support for Lexicon I-ONIX FW810sTakashi Sakamoto4-1/+41
I-ONIX FW810s was shipped in Lexicon brand of HARMAN International industries, Inc 2009. The model uses TCD2220 ASIC as its communication engine. TCAT general protocol is supported, its extension isn't. This patch adds support for the model with hard-coded stream formats. $ python3 ~/git/linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04042b91 bus_info_length 4, crc_length 4, crc 11153 404 31333934 bus_name "1394" 408 e0008102 irmc 1, cmc 1, isc 1, bmc 0, cyc_clk_acc 0, max_rec 8 (512) 40c 000fd720 company_id 000fd7 | 410 007d7ecf device_id 20007d7ecf | EUI-64 000fd720007d7ecf root directory ----------------------------------------------------------------- 414 00064c2d directory_length 6, crc 19501 418 03000fd7 vendor 41c 8100000a --> descriptor leaf at 444 420 17000001 model 424 8100000d --> descriptor leaf at 458 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 000438f2 directory_length 4, crc 14578 434 12000fd7 specifier id 438 13000001 version 43c 17000001 model 440 8100000d --> descriptor leaf at 474 descriptor leaf at 444 ----------------------------------------------------------------- 444 000489d5 leaf_length 4, crc 35285 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 4c657869 "Lexi" 454 636f6e00 "con" descriptor leaf at 458 ----------------------------------------------------------------- 458 0006594b leaf_length 6, crc 22859 45c 00000000 textual descriptor 460 00000000 minimal ASCII 464 492d4f4e "I-ON" 468 49585f46 "IX_F" 46c 57383130 "W810" 470 53000000 "S" descriptor leaf at 474 ----------------------------------------------------------------- 474 0006594b leaf_length 6, crc 22859 478 00000000 textual descriptor 47c 00000000 minimal ASCII 480 492d4f4e "I-ON" 484 49585f46 "IX_F" 488 57383130 "W810" 48c 53000000 "S" Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210115035623.148580-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-08ALSA: Convert strlcpy to strscpy when return value is unusedJoe Perches1-1/+1
strlcpy is deprecated. see: Documentation/process/deprecated.rst Change the calls that do not use the strlcpy return value to the preferred strscpy. Done with cocci script: @@ expression e1, e2, e3; @@ - strlcpy( + strscpy( e1, e2, e3); This cocci script leaves the instances where the return value is used unchanged. After this patch, sound/ has 3 uses of strlcpy() that need to be manually inspected for conversion and changed one day. $ git grep -w strlcpy sound/ sound/usb/card.c: len = strlcpy(card->longname, s, sizeof(card->longname)); sound/usb/mixer.c: return strlcpy(buf, p->name, buflen); sound/usb/mixer.c: return strlcpy(buf, p->names[index], buflen); Miscellenea: o Remove trailing whitespace in conversion of sound/core/hwdep.c Link: https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/22b393d1790bb268769d0bab7bacf0866dcb0c14.camel@perches.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-20Merge branch 'for-linus' into for-nextTakashi Iwai1-1/+4
Resolved the merge conflict in HD-audio Tegra driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-13ALSA: dice: add support for Alesis MasterControlTakashi Sakamoto3-0/+33
Alesis MasterControl was shipped 2009 and already discontinued. This model consists of: * TSB41AB2 for physical layer of IEEE 1394 * WaveFront Dice II STD for link layer and protocol implementation * FreeScale DSPB56374AE Although the firmware of this model can respond against read transaction to address space for TCAT extension protocol, the content is not valid for protocol extension. This results in sound card without any PCM/MIDI interfaces. $ ./firewire-request /dev/fw1 read 0xffffe0200000 0x48 result: 000: 00 00 00 20 00 00 04 94 00 00 04 b4 00 00 00 b4 result: 010: 00 00 05 68 00 00 00 24 00 00 05 8c 00 00 00 48 result: 020: 00 00 00 20 00 00 00 08 00 00 00 20 00 00 00 20 result: 030: 00 00 00 10 00 00 00 08 00 00 00 08 00 00 00 04 result: 040: 00 00 00 00 00 00 00 00 This commit adds support the model by adding hard-coded stream formats. $ python3 ~/git/linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04041ad7 bus_info_length 4, crc_length 4, crc 6871 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 00059504 company_id 000595 | Alesis Corporation 410 008003f5 device_id 04008003f5 | EUI-64 00059504008003f5 root directory ----------------------------------------------------------------- 414 0006a620 directory_length 6, crc 42528 418 03000595 vendor: Alesis Corporation 41c 8100000a --> descriptor leaf at 444 420 17000002 model 424 8100000d --> descriptor leaf at 458 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 00041b9f directory_length 4, crc 7071 434 12000595 specifier id: Alesis Corporation 438 13000001 version: audio 43c 17000002 model 440 8100000d --> descriptor leaf at 474 descriptor leaf at 444 ----------------------------------------------------------------- 444 000494c2 leaf_length 4, crc 38082 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 416c6573 "Ales" 454 69730000 "is" descriptor leaf at 458 ----------------------------------------------------------------- 458 0006c2ec leaf_length 6, crc 49900 45c 00000000 textual descriptor 460 00000000 minimal ASCII 464 4d617374 "Mast" 468 6572436f "erCo" 46c 6e74726f "ntro" 470 6c000000 "l" descriptor leaf at 474 ----------------------------------------------------------------- 474 0006c2ec leaf_length 6, crc 49900 478 00000000 textual descriptor 47c 00000000 minimal ASCII 480 4d617374 "Mast" 484 6572436f "erCo" 488 6e74726f "ntro" 48c 6c000000 "l" Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200113084630.14305-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-13ALSA: dice: loosen stream format check for MIDI conformant data channelTakashi Sakamoto1-6/+3
ALSA dice driver expects devices to multiplex MIDI messages into first port of isochronous communication. Actually devices perform for it. However, check of stream format is invalid for second port of isochronous communication. As a result, when the device supports two ports for isochronous communication and the stream format is hard-coded, ALSA dice driver fails to start packet streaming. This commit loosens stream format check for MIDI conformant data channel. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200113084630.14305-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-13ALSA: dice: fix fallback from protocol extension into limited functionalityTakashi Sakamoto1-1/+4
At failure of attempt to detect protocol extension, ALSA dice driver should be fallback to limited functionality. However it's not. This commit fixes it. Cc: <stable@vger.kernel.org> # v4.18+ Fixes: 58579c056c1c9 ("ALSA: dice: use extended protocol to detect available stream formats") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200113084630.14305-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-12-11ALSA: firewire: Drop superfluous ioctl PCM opsTakashi Iwai1-2/+0
All the PCM ioctl ops of ALSA FireWire drivers do nothing but calling the default handler. Now PCM core accepts NULL as the default ioctl ops(*), so let's drop altogether. (*) commit fc033cbf6fb7 ("ALSA: pcm: Allow NULL ioctl ops") Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191210061145.24641-6-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-12-11ALSA: firewire: Use managed buffer allocationTakashi Iwai1-9/+4
Clean up the drivers with the new managed buffer allocation API. The superfluous snd_pcm_lib_malloc_pages() and snd_pcm_lib_free_pages() calls are dropped. Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191209192422.23902-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-06ALSA: firewire: Convert to the common vmalloc memallocTakashi Iwai1-5/+6
The recent change (*) in the ALSA memalloc core allows us to drop the special vmalloc-specific allocation and page handling. This patch coverts to the common code. (*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation support 7e8edae39fd1: ALSA: pcm: Handle special page mapping in the default mmap handler Link: https://lore.kernel.org/r/20191105151856.10785-11-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-19ALSA: firewire-lib: postpone to start IR contextTakashi Sakamoto1-1/+1
Some devices have a quirk to postpone transmission of isoc packet for several dozen or hundred isoc cycles since configured to transmit. Furthermore, some devices have a quirk to transmit isoc packet with discontinued data of its header. In 1394 OHCI specification, software allows to start isoc context with certain isoc cycle. Linux firewire subsystem has kernel API to use it as well. This commit uses the functionality of 1394 OHCI controller to handle the quirks. At present, this feature is convenient to ALSA bebob and fireface driver. As a result, some devices can be safely handled, as long as I know: - MAudio FireWire solo - MAudio ProFire Lightbridge - MAudio FireWire 410 - Roland FA-66 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191018061911.24909-7-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-19ALSA: firewire-lib: replace ack callback to flush isoc contexts in AMDTP domainTakashi Sakamoto1-2/+2
An isoc context for AMDTP stream is flushed to queue packet by a call of pcm.ack. This commit extends this for AMDTP domain. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191018061911.24909-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-19ALSA: firewire-lib: replace pointer callback to flush isoc contexts in AMDTP ↵Takashi Sakamoto1-2/+2
domain An isoc context for AMDTP stream is flushed to queue packet by a call of pcm.pointer. This commit extends this for AMDTP domain. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191018061911.24909-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-18ALSA: dice: share PCM buffer size for both directionTakashi Sakamoto4-7/+23
This commit allows ALSA dice driver to share PCM buffer size for both capture and playback PCM substream. When AMDTP domain starts for one of the PCM substream, buffer size of the PCM substream is stores to AMDTP domain structure. Some AMDTP streams have already run with the buffer size when another PCM substream starts, therefore the PCM substream has a constraint to its buffer size. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191017155424.885-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-18ALSA: firewire-lib: use variable size of queue for isoc packets instead of ↵Takashi Sakamoto1-1/+1
fixed size The number of packets in packet buffer has been fixed number (=48) since first commit of ALSA IEC 61883-1/6 packet streaming engine. This commit allows the engine to use variable number of packets in the buffer. The size is calculated by a parameter in AMDTP domain structure surely to store the number of events in the packets of buffer. Although the value of parameter is expected to come from 'period size' parameter of PCM substream, at present 48 is still used. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191017155424.885-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-17ALSA: dice: use the same size of period for PCM substream in AMDTP streamsTakashi Sakamoto1-12/+31
In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-17ALSA: dice: register the size of PCM period to AMDTP domainTakashi Sakamoto4-4/+16
This commit is a preparation to share the size of PCM period between PCM substreams on AMDTP streams in the same domain. At this time, the size of PCM period in PCM substream which starts AMDTP streams in the same domain is recorded. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-09-16ALSA: dice: fix wrong packet parameter for Alesis iO26Takashi Sakamoto1-1/+1
At higher sampling rate (e.g. 192.0 kHz), Alesis iO26 transfers 4 data channels per data block in CIP. Both iO14 and iO26 have the same contents in their configuration ROM. For this reason, ALSA Dice driver attempts to distinguish them according to the value of TX0_AUDIO register at probe callback. Although the way is valid at lower and middle sampling rate, it's lastly invalid at higher sampling rate because because the two models returns the same value for read transaction to the register. In the most cases, users just plug-in the device and ALSA dice driver detects it. In the case, the device runs at lower sampling rate and the driver detects expectedly. For this reason, this commit leaves the way to detect as is. Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis") Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20190916101851.30409-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-29ALSA: dice: fix error path for initialization of stream structuresTakashi Sakamoto1-1/+1
When introducing AMDTP domain to ALSA dice driver, error path does not handle error correctly. This commit fixes the bug. Fixes: e9f21129b8d8 ("ALSA: dice: support AMDTP domain") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-05ALSA: dice: support AMDTP domainTakashi Sakamoto2-7/+27
This commit adds AMDTP domain support for ALSA dice driver. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-08Merge tag 'asoc-v5.3' of ↵Takashi Iwai9-15/+9
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.3 This is a very big update, mainly thanks to Morimoto-san's refactoring work and some fairly large new drivers. - Lots more work on moving towards a component based framework from Morimoto-san. - Support for force disconnecting muxes from Jerome Brunet. - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant CX2072X, Realtek RT1011 and RT1308. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-07ALSA: dice: fix wrong reference count for stream functionality at error path ↵Takashi Sakamoto1-0/+2
of rawmidi interface In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA dice driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: 3cd2c2d780a2 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-21ALSA: dice: unify stop and release method for duplex streamsTakashi Sakamoto4-9/+2
>From callbacks for pcm and rawmidi interfaces, the functions to stop and release duplex streams are called at the same time. This commit merges the two functions. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-13ALSA: dice: fix compiler warning due to returning uninitialized valueTakashi Sakamoto1-1/+1
This commit fixes the warning due to returning uninitialized value from start_streams() helper function. sound/firewire/dice/dice-stream.c: In function 'start_streams.isra.0': >> sound/firewire/dice/dice-stream.c:350:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] int err; ^~~ Reported-by: kbuild test robot <lkp@intel.com> Fixes: 3cd2c2d780a2 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-11ALSA: dice: code refactoring for pcm.hw_params/hw_free callbacksTakashi Sakamoto1-47/+7
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both direction have no differences. This commit unifies the pairs. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-11ALSA: dice: update isochronous resources when starting packet streaming ↵Takashi Sakamoto1-0/+10
after bus-reset After bus reset, isochronous resource manager releases all of allocated isochronous resources. The nodes to transfer isochronous packet should request reallocation of the resources. However, between the bus-reset and invocation of 'struct fw_driver.update' handler, ALSA PCM application can detect this situation by XRUN because the target device cancelled to transmit packets once bus-reset occurs. Due to the above mechanism, ALSA fireface driver just stops packet streaming in the update handler, thus pcm.prepare handler should request the reallocation. This commit requests the reallocation in pcm.prepare callback when bus generation is changed. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-11ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free ↵Takashi Sakamoto4-115/+143
callbacks Once allocated, isochronous resources are available for packet streaming, even if the streaming is cancelled. For this reason, current implementation handles allocation of the resources and starting packet streaming at the same time. However, this brings complicated procedure to start packet streaming. This commit separates the allocation and starting. The allocation is done in pcm.hw_params callback and available till pcm.hw_free callback. Even if any XRUN occurs, pcm.prepare callback is done to restart packet streaming without releasing/allocating the resources. There are two points to stop packet streaming; in pcm.hw_params and pcm.prepare callbacks. The former point is a case that packet streaming is already started for any MIDI substream then packet streaming is requested with different sampling transfer frequency for any PCM substream. The latter point is cases of any XRUN or packet queueing error. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-11ALSA: dice: code refactoring to keep isochronous resourcesTakashi Sakamoto1-59/+74
This commit is a part of preparation to perform allocation/release of isochronous resources in pcm.hw_params/hw_free callbacks. This commit adds a helper function to allocate isochronous resources, separated from operations to start packet streaming, I note that some dice-based devices have two pair of endpoints for isochronous packet straeming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-11ALSA: dice: code refactoring to stop packet streamingTakashi Sakamoto1-13/+14
This commit is a part of preparation to perform allocation/release of isochronous resources in pcm.hw_params/hw_free callbacks. There're three points to finish packet streaming but no helper functions for common operations for it. This commit adds a helper function for operations to finish packet streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 345Thomas Gleixner8-15/+8
Based on 1 normalized pattern(s): licensed under the terms of the gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 88 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000437.521539229@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20ALSA: dice: add stream format parameters for PreSonus FireStudioTakashi Sakamoto4-1/+73
FireStudio was launched by PreSonus 2009. This model consists of three ICs for its packet processing on IEEE 1394 bus: - Texus Instruments TSB41AB2 for physical layer of IEEE 1394 bus - WaveFront semiconductor, Dice II STD ASIC for link layer of IEEE 1394 bus and protocol layer - Xilinx Spartan XG3S500E FPGA for signal processing This model don't support TCAT extended application protocol. For such devices, ALSA dice driver needs to have hard-coded parameters for stream formats. This commit adds hard-coded table for this model. As a result, sampling transfer frequencies of 88.2/96.0 kHz are supported. I note that this patch can be backported to Linux kernel v4.18 and later. $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04042eda bus_info_length 4, crc_length 4, crc 11994 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 000a9204 company_id 000a92 | 410 023a8b7f device_id 04023a8b7f | EUI-64 000a9204023a8b7f root directory ----------------------------------------------------------------- 414 000661b6 directory_length 6, crc 25014 418 03000a92 vendor 41c 8100000a --> descriptor leaf at 444 420 17000008 model 424 8100000d --> descriptor leaf at 458 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 00041c75 directory_length 4, crc 7285 434 12000a92 specifier id 438 13000001 version 43c 17000008 model 440 8100000c --> descriptor leaf at 470 descriptor leaf at 444 ----------------------------------------------------------------- 444 00047c11 leaf_length 4, crc 31761 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 50726553 "PreS" 454 6f6e7573 "onus" descriptor leaf at 458 ----------------------------------------------------------------- 458 0005d7b3 leaf_length 5, crc 55219 45c 00000000 textual descriptor 460 00000000 minimal ASCII 464 46495245 "FIRE" 468 53545544 "STUD" 46c 494f0000 "IO" descriptor leaf at 470 ----------------------------------------------------------------- 470 0005d7b3 leaf_length 5, crc 55219 474 00000000 textual descriptor 478 00000000 minimal ASCII 47c 46495245 "FIRE" 480 53545544 "STUD" 484 494f0000 "IO" Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-06ALSA: firewire: Remove superfluous snd_info_register() callsTakashi Iwai1-10/+2
The calls of snd_info_register() are superfluous and should be avoided at the procfs creation time. They are called at the end of the whole initialization via snd_card_register(). This patch drops such superfluous calls. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-28ALSA: dice: add support for Solid State Logic Duende Classic/MiniTakashi Sakamoto1-1/+11
Duende Classic was produced by Solid State Logic in 2006, as a first model of Duende DSP series. The following model, Duende Mini was produced in 2008. They are designed to receive isochronous packets for PCM frames via IEEE 1394 bus, perform signal processing by downloaded program, then transfer isochronous packets for converted PCM frames. These two models includes the same embedded board, consists of several ICs below: - Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus - WaveFront semiconductor, DICE II STD ASIC for link/protocol layer - Altera MAX 3000A CPLD for programs - Analog devices, SHARC ADSP-21363 for signal processing (4 chips) This commit adds support for the two models to ALSA dice driver. Like support for the other devices, packet streaming is just available. Userspace applications should be developed if full features became available; e.g. program uploader and parameter controller. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 349771402425, 'cmc': True, 'cyc_clk_acc': 255, 'generation': 1, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 20674, 'pmc': False}, 'root-directory': [ ['VENDOR', 20674], ['DESCRIPTOR', 'Solid State Logic'], ['MODEL', 112], ['DESCRIPTOR', 'Duende board'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': True}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 20674], ['VERSION', 1], ['MODEL', 112], ['DESCRIPTOR', 'Duende board']]]]} Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-27ALSA: dice: fix to wait for releases of all ALSA character devicesTakashi Sakamoto1-2/+2
In a development period for Linux kernel v4.20, drivers in ALSA firewire stack were changed to wait for releases of all ALSA character devices at .remove callback of bus driver. However, ALSA dice driver is partly out of this change. This bug can bring fault to user process which holds the last of character device in unplugging. This commit fixes the driver to wait in the callback. Fixes: 61ccc6f6b27c ('ALSA: firewire: block .remove callback of bus driver till all of ALSA character devices are released') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10ALSA: firewire: simplify cleanup process when failing to register sound cardTakashi Sakamoto1-21/+5
In former commits, .private_free callback releases resources just for data transmission. This release function can be called without the resources are actually allocated in error paths. This commit applies a small refactoring to clean up codes in error paths. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10ALSA: firewire: release reference count of firewire unit in .remove callback ↵Takashi Sakamoto1-6/+3
of bus driver In a previous commit, drivers in ALSA firewire stack blocks .remove callback of bus driver. This enables to release members of private data in the callback after releasing device of sound card. This commit simplifies codes to release the members. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04ALSA: firewire: use managed-resource of fw unit device for private dataTakashi Sakamoto1-5/+3
At present, private data of each driver in ALSA firewire stack is allocated/freed by kernel slab allocator for corresponding unit on IEEE 1394 bus. In this case, resource-managed slab allocator is available to release memory object automatically just before releasing device structure for the unit. This idea can prevent runtime from memory leak due to programming mistakes. This commit uses the allocator for the private data. These drivers already use reference counter to maintain lifetime of device structure for the unit by a pair of fw_unit_get()/fw_unit_put(). The private data is safely released in a callback of 'struct snd_card.private_free(). Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-12Merge branch 'for-next' into for-linusTakashi Iwai1-2/+0
Preparation for 4.19 merge material. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-06ALSA: dice: fix wrong copy to rx parameters for Alesis iO26Takashi Sakamoto1-1/+1
A commit 28b208f600a3 ('ALSA: dice: add parameters of stream formats for models produced by Alesis') adds wrong copy to rx parameters instead of tx parameters for Alesis iO26. This commit fixes the bug for v4.18-rc8. Fixes: 28b208f600a3 ('ALSA: dice: add parameters of stream formats for models produced by Alesis') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # v4.18 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-18ALSA: pcm: Nuke snd_pcm_lib_mmap_vmalloc()Takashi Iwai1-2/+0
snd_pcm_lib_mmap_vmalloc() was supposed to be implemented with somewhat special for vmalloc handling, but in the end, this turned to just the default handler, i.e. NULL. As the situation has never changed over decades, let's rip it off. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>