summaryrefslogtreecommitdiffstats
path: root/sound/firewire/dice.c
AgeCommit message (Collapse)AuthorFilesLines
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang1-1/+1
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-20ALSA: dice: restrict the driver to playback-only devicesClemens Ladisch1-0/+9
At the moment, this driver supports only playback, while FFADO supports (only) full-duplex devices. So, prevent conflicts by not claiming devices that would be better handled by FFADO. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: fix detection of Weiss devicesClemens Ladisch1-5/+12
While most DICE devices keep TCAT's default category ID of 0x04, Weiss devices identify themselves with 0x00. Reported-by: Rolf Anderegg <rolf.anderegg@weiss.ch> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: dice_proc_read: remove wrong typecastClemens Ladisch1-2/+1
Remove a wrong typecast that resulted from a copy-and-paste error. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: add a proc file to show device informationClemens Ladisch1-0/+246
For easier debugging, add a proc file to show the device's capabilities and current status. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: check clock change timeoutClemens Ladisch1-2/+3
Output a warning if the wait for the clock change notification times out. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: dynamic sample rate selectionClemens Ladisch1-35/+102
Instead of relying of some control panel application to configure some fixed sample rate, allow applications to set it automatically. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: get rate-dependent parametersClemens Ladisch1-2/+90
In preparation for sample rate selection support, read the stream parameters that might change when running at different sample rates. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: allow notifications during initializationClemens Ladisch1-11/+11
Reorganize the initialization order so that the driver can receive notifications earlier. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: get clock capabilitiesClemens Ladisch1-2/+21
In preparation for sample rate selection support, ensure that the driver knows about the device's clock capabilities. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: fix lockingStefan Richter1-4/+4
Avoid a lock inversion between dice->mutex and pcm->open_mutex. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: remove superfluous fieldClemens Ladisch1-3/+1
The pcm field was not actually used. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: remove 10s period length limitClemens Ladisch1-1/+1
Since commit f2b3614cefb6 (Don't check DMA time-out too shortly), we need no longer to restrict the period length to less than 10 s. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: avoid superflous write at bus resetClemens Ladisch1-0/+5
When a bus reset happens, the enable register is automatically cleared, so we do not need to clear it manually when stopping the stream. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: firewire: extend snd_fw_transaction()Clemens Ladisch1-143/+64
Add a flag to snd_fw_transaction() to allow it to abort when a bus reset happens. This removes most of the duplicated error handling loops that were required around calls to the low-level fw_run_transaction(). Also add a flag to suppress error messages; errors are expected when we attempt to clean up after the device was unplugged. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: optimize reading of consecutive registersClemens Ladisch1-16/+11
Instead of reading two consecutive register with two quadlet requests, use one block read request. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: support dual-wire stream format at 192 kHzClemens Ladisch1-8/+21
Change the AMDTP streaming code to handle the non-standard stream format that DICE devices use at sample rates greater than 96 kHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: fix device detection for other vendorsClemens Ladisch1-18/+84
DICE devices do not have a unique specifier ID in their unit directory (it's always the same as the device vendor's ID), so rely on just the version ID for driver loading, and use a heuristic in the probe callback to detect actual DICE devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: reorganize interface definitionsClemens Ladisch1-207/+2
Move the DICE interface symbols into a separate header file, and add more documentation. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: firewire: introduce amdtp_out_stream_running()Clemens Ladisch1-12/+5
Introduce the helper function amdtp_out_stream_running(). This makes many checks in amdtp.c clearer and frees the device drivers from having to track this with a separate variable. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: clear device lock when closing hwdep deviceClemens Ladisch1-0/+13
Ensure that misbehaving or aborted userspace programs do not accidentally keep the lock. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: implement hwdep deviceClemens Ladisch1-22/+203
Implement the hwdep locking and notification mechanisms. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: fix hang when unplugging a running deviceClemens Ladisch1-2/+5
When aborting a PCM stream, the xrun is signaled only if the stream is running. When disconnecting a PCM stream, calling snd_card_disconnect() too early would change the stream into a non-running state and thus prevent the xrun from being noticed by user space. To prevent this, move the snd_card_disconnect() call after the xrun. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice, firewire-lib: add blocking modeClemens Ladisch1-1/+1
Allow AMDTP output streams to use blocking mode. Use it for DICE devices, because the old DICE-II chip will in some cases not be able to lock to non-blocking streams (erratum E7). Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: reduce noisy loggingClemens Ladisch1-2/+2
The notification bits are not of general interest; log them only when debugging. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: allow all sample ratesClemens Ladisch1-13/+42
Instead of forcing a constant 44.1 kHz, read the current sample rate from the device when opening the PCM device. Actually changing the sample rate requires some separate controller application. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-20ALSA: dice: optimize bus reset handlingClemens Ladisch1-55/+93
After a bus reset, do not stop the stream completely to avoid having to reconfigure the device when restarting the stream. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-10-17ALSA: add DICE driverClemens Ladisch1-0/+1008
As a start point for further development, this is an incomplete driver for DICE devices: - only playback (so no clock source except the bus clock) - only 44.1 kHz - no MIDI - recovery after bus reset is slow - hwdep device is created, but not actually implemented Contains compilation fixes by Stefan Richter. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>