summaryrefslogtreecommitdiffstats
path: root/sound/firewire/amdtp-am824.h
AgeCommit message (Collapse)AuthorFilesLines
2021-05-18ALSA: firewire-lib/motu: use int type for the value of bitwise OR with ↵Takashi Sakamoto1-1/+1
enumerator-constant It brings some inconvenience in practice to use enumerated type for variable to which bitwise OR with enumerator constant is assigned. This commit replaces declarations of enumerated type with int type. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210518084557.102681-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-22ALSA: firewire: remove support for 16 bit PCM samples in playback substreamTakashi Sakamoto1-5/+1
In IEC 61883-6, AM824 is described as format of data block. In this format, one data block consists of several data channels, which is aligned to 32 bit. One data channel has 8 bit label field and 24 bit data field. PCM frames are transferred in Multi Bit Linear Audio (MBLA) data channel. This channel can include 16/20/24 bit PCM sample. As long as I know, models which support IEC 61883-1/6 doesn't allow to switch bit length of PCM sample in MBLA data channel. They always transmit/receive PCM frames of 24 bit length. This can be seen for the other models which support protocols similar to IEC 61883-1/6. On the other hand, current drivers for these protocols supports 16 bit length PCM sample in playback substream. In this case, PCM sample is put into the MBLA data channel with 8 bit padding in LSB side. Although 16 bit PCM sample is major because it's in CD format, this doesn't represent device capability as is. This commit removes support for 16 bit PCM samples in playback substream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-29ALSA: firewire-lib: complete AM824 data block processing layerTakashi Sakamoto1-0/+24
This commit moves the codes related to data block processing from packet streaming layer to AM824 layer. Each driver initializes amdtp stream structure for AM824 data block by calling amdtp_am824_init(). Then, a memory block is allocated for AM824 specific structure. This memory block is released by calling amdtp_stream_destroy(). When setting streaming parameters, it calls amdtp_am824_set_parameters(). When starting packet streaming, it calls amdtp_stream_start(). When stopping packet streaming, it calls amdtp_stream_stop(). Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-29ALSA: firewire-lib: move MIDI trigger helper function to AM824 layerTakashi Sakamoto1-0/+4
In IEC 61883-6, MIDI messages are transferred in MIDI conformant data channel. Essentially, packet streaming layer is not responsible for MIDI functionality. This commit moves MIDI trigger helper function from the layer to AM824 layer. The rest of codes related to MIDI functionality will be moved in later commits. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-29ALSA: firewire-lib: add helper functions to set positions of data channelsTakashi Sakamoto1-0/+6
In IEC 61883-6, several types of data are available in AM824 format. The data is transferred in each data channel. The position of data channel in data block differs depending on model. Current implementation has an array to map the index of data channel in an data block to the position of actual data channel. The implementation allows each driver to access the mapping directly. In later commit, the mapping is in specific structure pushed into an opaque pointer. Helper functions are required. This commit adds the helper functions for this purpose. In IEC 61883-6, AM824 format supports many data types, while this specification easily causes over-engineering. Current AM824 implementation is allowed to handle two types of data, Multi Bit Linear Audio data (=PCM samples) and MIDI conformant data (=MIDI messages). Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-29ALSA: firewire-lib: move PCM substream constraint to AM824 layerTakashi Sakamoto1-0/+5
In IEC 61883-6, PCM frames are transferred in Multi Bit Linear Audio data channel. The data channel transfers 16/20/24 bit PCM samples. Thus, PCM substream has a constrain about it. This commit moves codes related to the constraint from packet streaming layer to AM824 data block processing layer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-29ALSA: firewire-lib: rename parameter setting function for AM824 with FDF fieldTakashi Sakamoto1-0/+5
The value of FDF field in CIP header is protocol-dependent. Thus, it's better to allow data block processing layer to decide the value in any timing. In AM824 data format, the value of FDF field in CIP header indicates N-flag and Nominal Sampling Frequency Code (sfc). The N-flag is for switching 'Clock-based rate control mode' and 'Command-based rate control mode'. In our implementation, 'Clock-based rate control mode' is just supported. Therefore, When sampling transfer frequency is decided, then the FDF can be set. This commit replaces 'amdtp_stream_set_parameters' with 'amdtp_am824_set_parameters' to set the FDF. This is the same timing to decide the ration between the number of data blocks and the number of PCM frames. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-29ALSA: firewire-lib: add data block processing layer for AM824 formatTakashi Sakamoto1-0/+8
This commit adds data block processing layer for AM824 format. The new layer initializes streaming layer with its value for fmt field. Currently, most implementation of data block processing still remains streaming layer. In later commits, these codes will be moved to the layer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>