summaryrefslogtreecommitdiffstats
path: root/sound/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-6/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner25-368/+25
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 50 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner3-42/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner4-0/+4
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-25ALSA: aloop: Support S24 sample formatsTimo Wischer1-1/+3
Currently snd_aloop supports only S16 and S32 audio sample formats. With this patch the S24 formats are also supported. Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-18ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declarationColin Ian King1-1/+1
The function snd_opl3_drum_switch declaration in the header file has the order of the two arguments on_off and vel swapped when compared to the definition arguments of vel and on_off. Fix this by swapping them around to match the definition. This error predates the git history, so no idea when this error was introduced. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-06ALSA: drivers: Clean up with new procfs helpersTakashi Iwai3-20/+5
Simplify the proc fs creation code with new helper functions, snd_card_ro_proc_new() and snd_card_rw_proc_new(). Just a code refactoring and no functional changes. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-06ALSA: opl4: Remove superfluous snd_info_register() callsTakashi Iwai1-4/+0
The calls of snd_info_register() are superfluous and should be avoided at the procfs creation time. They are called at the end of the whole initialization via snd_card_register(). This patch drops such superfluous calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-15ALSA: drivers: Remove superfluous snd_pcm_suspend*() callsTakashi Iwai4-11/+0
The call of snd_pcm_suspend_all() & co became superfluous since we call it in the PCM PM ops. Let's remove them. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: opl3: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114878 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-03ALSA: drivers: Remove empty init and exitTakashi Iwai4-59/+0
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-26ALSA: opl3: Declare common variables properlyTakashi Iwai6-10/+6
Move the declarations of common variables into opl3_voice.h instead of declaring at each file multiple times, which was error-prone. This fixes sparse warnings like: sound/drivers/opl3/opl3_synth.c:51:6: warning: symbol 'snd_opl3_regmap' was not declared. Should it be static? Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-18ALSA: pcm: Nuke snd_pcm_lib_mmap_vmalloc()Takashi Iwai2-3/+0
snd_pcm_lib_mmap_vmalloc() was supposed to be implemented with somewhat special for vmalloc handling, but in the end, this turned to just the default handler, i.e. NULL. As the situation has never changed over decades, let's rip it off. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: opl3: remove redundant pointer opl3Colin Ian King2-18/+0
Variable opl3 is being assigned but is never used hence it is redundant and can be removed. Cleans up several clang warnings: warning: variable 'opl3' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-15docs: Fix some broken referencesMauro Carvalho Chehab1-2/+2
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-05-28ALSA: aloop: Reduced duplicated PCM ops definitionTakashi Iwai1-16/+3
The PCM ops defined for playback and capture are identical. Just use the single one for both. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-28sound: Use octal not symbolic permissionsJoe Perches4-8/+8
Convert the S_<FOO> symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...> Miscellanea: o Wrapped one multi-line call to a single line Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-30ALSA: aloop: Add missing cable lock to ctl API callbacksTakashi Iwai1-2/+15
Some control API callbacks in aloop driver are too lazy to take the loopback->cable_lock and it results in possible races of cable access while it's being freed. It eventually lead to a UAF, as reported by fuzzer recently. This patch covers such control API callbacks and add the proper mutex locks. Reported-by: DaeRyong Jeong <threeearcat@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-25ALSA: opl3: Hardening for potential Spectre v1Takashi Iwai1-2/+5
As recently Smatch suggested, one place in OPL3 driver may expand the array directly from the user-space value with speculation: sound/drivers/opl3/opl3_synth.c:476 snd_opl3_set_voice() warn: potential spectre issue 'snd_opl3_regmap' This patch puts array_index_nospec() for hardening against it. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2 Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-27ALSA: aloop: Mark paused device as inactiveRobert Rosengren1-3/+9
Show paused ALSA aloop device as inactive, i.e. the control "PCM Slave Active" set as false. Notification sent upon state change. This makes it possible for client capturing from aloop device to know if data is expected. Without it the client expects data even if playback is paused. Signed-off-by: Robert Rosengren <robert.rosengren@axis.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22ALSA: aloop: Fix access to not-yet-ready substream via cableTakashi Iwai1-1/+7
In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22ALSA: aloop: Sync stale timer before releaseTakashi Iwai1-1/+8
The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-29Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-15/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer departement presents: - A rather large rework of the hrtimer infrastructure which introduces softirq based hrtimers to replace the spread of hrtimer/tasklet combos which force the actual callback execution into softirq context. The approach is completely different from the initial implementation which you cursed at 10 years ago rightfully. The softirq based timers have their own queues and there is no nasty indirection and list reshuffling in the hard interrupt anymore. This comes with conversion of some of the hrtimer/tasklet users, the rest and the final removal of that horrible interface will come towards the end of the merge window or go through the relevant maintainer trees. Note: The top commit merged the last minute bugfix for the 10 years old CPU hotplug bug as I wanted to make sure that I fatfinger the merge conflict resolution myself. - The overhaul of the STM32 clocksource/clockevents driver - A new driver for the Spreadtrum SC9860 timer - A new driver dor the Actions Semi S700 timer - The usual set of fixes and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) usb/gadget/NCM: Replace tasklet with softirq hrtimer ALSA/dummy: Replace tasklet with softirq hrtimer hrtimer: Implement SOFT/HARD clock base selection hrtimer: Implement support for softirq based hrtimers hrtimer: Prepare handling of hard and softirq based hrtimers hrtimer: Add clock bases and hrtimer mode for softirq context hrtimer: Use irqsave/irqrestore around __run_hrtimer() hrtimer: Factor out __hrtimer_next_event_base() hrtimer: Factor out __hrtimer_start_range_ns() hrtimer: Remove the 'base' parameter from hrtimer_reprogram() hrtimer: Make remote enqueue decision less restrictive hrtimer: Unify remote enqueue handling hrtimer: Unify hrtimer removal handling hrtimer: Make hrtimer_force_reprogramm() unconditionally available hrtimer: Make hrtimer_reprogramm() unconditional hrtimer: Make hrtimer_cpu_base.next_timer handling unconditional hrtimer: Make the remote enqueue check unconditional hrtimer: Use accesor functions instead of direct access hrtimer: Make the hrtimer_cpu_base::hres_active field unconditional, to simplify the code hrtimer: Make room in 'struct hrtimer_cpu_base' ...
2018-01-27Merge branch 'timers/urgent' into timers/coreThomas Gleixner1-48/+50
Pick up urgent bug fix and resolve the conflict. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-16ALSA/dummy: Replace tasklet with softirq hrtimerThomas Gleixner1-15/+12
The tasklet is used to defer the execution of snd_pcm_period_elapsed() to the softirq context. Using the HRTIMER_MODE_SOFT mode invokes the timer callback in softirq context as well which renders the tasklet useless. [o-takashi: avoid stall due to a call of hrtimer_cancel() on a callback of hrtimer] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Takashi Iwai <tiwai@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Jaroslav Kysela <perex@perex.cz> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: alsa-devel@alsa-project.org Cc: keescook@chromium.org Link: http://lkml.kernel.org/r/20171221104205.7269-35-anna-maria@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-09Merge branch 'for-linus' into for-nextTakashi Iwai1-48/+50
Back-merge to continue fixing the OSS emulation code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05ALSA: aloop: Fix racy hw constraints adjustmentTakashi Iwai1-30/+21
The aloop driver tries to update the hw constraints of the connected target on the cable of the opened PCM substream. This is done by adding the extra hw constraints rules referring to the substream runtime->hw fields, while the other substream may update the runtime hw of another side on the fly. This is, however, racy and may result in the inconsistent values when both PCM streams perform the prepare concurrently. One of the reason is that it overwrites the other's runtime->hw field; which is not only racy but also broken when it's called before the open of another side finishes. And, since the reference to runtime->hw isn't protected, the concurrent write may give the partial value update and become inconsistent. This patch is an attempt to fix and clean up: - The prepare doesn't change the runtime->hw of other side any longer, but only update the cable->hw that is referred commonly. - The extra rules refer to the loopback_pcm object instead of the runtime->hw. The actual hw is deduced from cable->hw. - The extra rules take the cable_lock to protect against the race. Fixes: b1c73fc8e697 ("ALSA: snd-aloop: Fix hw_params restrictions and checking") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05ALSA: aloop: Fix inconsistent format due to incomplete ruleTakashi Iwai1-7/+6
The extra hw constraint rule for the formats the aloop driver introduced has a slight flaw, where it doesn't return a positive value when the mask got changed. It came from the fact that it's basically a copy&paste from snd_hw_constraint_mask64(). The original code is supposed to be a single-shot and it modifies the mask bits only once and never after, while what we need for aloop is the dynamic hw rule that limits the mask bits. This difference results in the inconsistent state, as the hw_refine doesn't apply the dependencies fully. The worse and surprisingly result is that it causes a crash in OSS emulation when multiple full-duplex reads/writes are performed concurrently (I leave why it triggers Oops to readers as a homework). For fixing this, replace a few open-codes with the standard snd_mask_*() macros. Reported-by: syzbot+3902b5220e8ca27889ca@syzkaller.appspotmail.com Fixes: b1c73fc8e697 ("ALSA: snd-aloop: Fix hw_params restrictions and checking") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05ALSA: aloop: Release cable upon open error pathTakashi Iwai1-13/+25
The aloop runtime object and its assignment in the cable are left even when opening a substream fails. This doesn't mean any memory leak, but it still keeps the invalid pointer that may be referred by the another side of the cable spontaneously, which is a potential Oops cause. Clean up the cable assignment and the empty cable upon the error path properly. Fixes: 597603d615d2 ("ALSA: introduce the snd-aloop module for the PCM loopback") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-29ALSA: drivers: make array 'names' const, reduces object code sizeColin Ian King1-1/+1
Don't populate array 'names' on the stack but instead make them static. Makes the object code smaller by 50 bytes: Before: text data bss dec hex filename 21237 9192 1120 31549 7b3d linux/sound/drivers/dummy.o After: text data bss dec hex filename 21095 9280 1120 31495 7b07 linux/sound/drivers/dummy.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-13Merge tag 'asoc-v4.15' of ↵Takashi Iwai7-0/+7
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model thanks to some dedicated and persistent work from Robert Jarzmik. - Continued work from Morimoto-san on moving us towards being able to use components for everything. - Lots of cleanups for the Intel platform code, including support for their open source audio firmware. - Support for scaling MCLK with sample rate in simple-card. - Support for AMD Stoney platform.
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman7-0/+7
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24ALSA: drivers: Convert timers to use timer_setup()Kees Cook8-24/+19
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-31ALSA: vx: Put missing KERN_CONT prefixTakashi Iwai1-2/+2
The vx driver has a debug printk code without proper KERN_ prefix. On recent kernels, KERN_CONT prefix is mandatory for continued output lines. Put it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-31ALSA: opl3: Put missing KERN_CONT prefixTakashi Iwai1-2/+2
The opl3 driver has a debug printk code without proper KERN_ prefix. On recent kernels, KERN_CONT prefix is mandatory for continued output lines. Put it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-22ALSA: pcsp: Use common error handling code in snd_card_pcsp_probe()Markus Elfring1-16/+13
Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-19ALSA: drivers: constify snd_pcm_ops structuresArvind Yadav2-4/+4
snd_pcm_ops are not supposed to change at runtime. All functions working with snd_pcm_ops provided by <sound/pcm.h> work with const snd_pcm_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: drivers: make snd_pcm_hardware constBhumika Goyal5-7/+7
Make these const as they are only used in a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: drivers: mpu401: constify pnp_device_idArvind Yadav1-1/+1
pnp_device_id are not supposed to change at runtime. All functions working with pnp_device_id provided by <linux/pnp.h> work with const pnp_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-12ALSA: mpu401: Adjust four checks for null pointersMarkus Elfring1-4/+4
The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-12ALSA: mpu401: Use common error handling code in snd_mpu401_uart_new()Markus Elfring1-6/+9
Add a jump target so that a bit of exception handling can be better reused at the end of this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-12ALSA: mpu401: Delete an error message for a failed memory allocation in ↵Markus Elfring1-1/+0
snd_mpu401_uart_new() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-12ALSA: opl3: Delete an error message for a failed memory allocation in ↵Markus Elfring1-3/+1
snd_opl3_new() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-07-06ALSA: opl4: Move inline before return typeJoe Perches1-1/+1
Make the code like the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-28ALSA: Fix forgotten dependency fix for tristate OSS sequencer kconfigTakashi Iwai1-1/+3
In the commit 3d774d5ef066 ("ALSA: seq: Allow the tristate build of OSS emulation") we changed CONFIG_SND_SEQUENCER_OSS to tristate, but a couple of places were forgotten, namely, opl3 and emux Makefile. These contain the line like snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o and this doesn't work any longer as expected because snd-opl3-synth can be built-in while CONFIG_SND_SEQUENCER_OSS=m. This patch fixes these places to build properly for the new kconfig dependency. In the end, we had to use ifneq() to satisfy the requirement. It's a bit ugly, but lesser evil. Fixes: 3d774d5ef066 ("ALSA: seq: Allow the tristate build of OSS emulation") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-12ALSA: seq: Allow the modular sequencer registrationTakashi Iwai4-4/+6
Many drivers bind the sequencer stuff in off-load by another driver module, so that it's loaded only on demand. In the current code, this mechanism doesn't work when the driver is built-in while the sequencer is module. We check with IS_REACHABLE() and enable only when the sequencer is in the same level of build. However, this is basically a overshoot. The binder code (snd-seq-device) is an individual module from the sequencer core (snd-seq), and we just have to make the former a built-in while keeping the latter a module for allowing the scenario like the above. This patch achieves that by rewriting Kconfig slightly. Now, a driver that provides the manual sequencer device binding should select CONFIG_SND_SEQ_DEVICE in a way as select SND_SEQ_DEVICE if SND_SEQUENCER != n Note that the "!=n" is needed here to avoid the influence of the sequencer core is module while the driver is built-in. Also, since rawmidi.o may be linked with snd_seq_device.o when built-in, we have to shuffle the code to make the linker happy. (the kernel linker isn't smart enough yet to handle such a case.) That is, snd_seq_device.c is moved to sound/core from sound/core/seq, as well as Makefile. Last but not least, the patch replaces the code using IS_REACHABLE() with IS_ENABLED(), since now the condition meets always when enabled. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: seq: Reorganize kconfig and buildTakashi Iwai1-0/+13
This is a slightly intensive rewrite of Kconfig and Makefile about ALSA sequencer stuff. The first major change is that the kconfig items for the sequencer are moved to sound/core/seq/Kconfig. OK, that's easy. The substantial change is that, instead of hackish top-level module selection in Makefile, we define a Kconfig item for each sequencer module. The driver that requires such sequencer components select exclusively the kconfig items. This is more straightforward and standard way. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: seq: Allow the tristate build of OSS emulationTakashi Iwai2-3/+6
Currently OSS sequencer emulation is tied with ALSA sequencer core, both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y, the OSS sequencer emulation is also always built-in, even though the functionality can be built as an individual module. This patch changes the rule and allows users to build snd-seq-oss module while others are built-in. Essentially, it's just a few simple changes in Kconfig and Makefile. Some driver codes like opl3 need to convert from the simple ifdef to IS_ENABLED(). But that's all. You might wonder how about the dependency: right, it can be messy, but it still works. Since we rewrote the sequencer binding with the standard bus, the driver can be bound at any time on demand. So, the synthesizer driver module can be loaded individually from the OSS emulation core before/after it. Signed-off-by: Takashi Iwai <tiwai@suse.de>