summaryrefslogtreecommitdiffstats
path: root/security
AgeCommit message (Collapse)AuthorFilesLines
2021-10-21Merge branch 'ucount-fixes-for-v5.15' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ucounts fixes from Eric Biederman: "There has been one very hard to track down bug in the ucount code that we have been tracking since roughly v5.14 was released. Alex managed to find a reliable reproducer a few days ago and then I was able to instrument the code and figure out what the issue was. It turns out the sigqueue_alloc single atomic operation optimization did not play nicely with ucounts multiple level rlimits. It turned out that either sigqueue_alloc or sigqueue_free could be operating on multiple levels and trigger the conditions for the optimization on more than one level at the same time. To deal with that situation I have introduced inc_rlimit_get_ucounts and dec_rlimit_put_ucounts that just focuses on the optimization and the rlimit and ucount changes. While looking into the big bug I found I couple of other little issues so I am including those fixes here as well. When I have time I would very much like to dig into process ownership of the shared signal queue and see if we could pick a single owner for the entire queue so that all of the rlimits can count to that owner. That should entirely remove the need to call get_ucounts and put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult because Linux unlike POSIX supports setuid that works on a single thread" * 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring ucounts: Proper error handling in set_cred_ucounts ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds ucounts: Fix signal ucount refcounting
2021-10-20ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyringEric W. Biederman1-0/+8
Setting cred->ucounts in cred_alloc_blank does not make sense. The uid and user_ns are deliberately not set in cred_alloc_blank but instead the setting is delayed until key_change_session_keyring. So move dealing with ucounts into key_change_session_keyring as well. Unfortunately that movement of get_ucounts adds a new failure mode to key_change_session_keyring. I do not see anything stopping the parent process from calling setuid and changing the relevant part of it's cred while keyctl_session_to_parent is running making it fundamentally necessary to call get_ucounts in key_change_session_keyring. Which means that the new failure mode cannot be avoided. A failure of key_change_session_keyring results in a single threaded parent keeping it's existing credentials. Which results in the parent process not being able to access the session keyring and whichever keys are in the new keyring. Further get_ucounts is only expected to fail if the number of bits in the refernece count for the structure is too few. Since the code has no other way to report the failure of get_ucounts and because such failures are not expected to be common add a WARN_ONCE to report this problem to userspace. Between the WARN_ONCE and the parent process not having access to the keys in the new session keyring I expect any failure of get_ucounts will be noticed and reported and we can find another way to handle this condition. (Possibly by just making ucounts->count an atomic_long_t). Cc: stable@vger.kernel.org Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Link: https://lkml.kernel.org/r/7k0ias0uf.fsf_-_@disp2133 Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Alexey Gladkov <legion@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-07Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/David S. Miller1-1/+3
ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2021-10-07 1) Fix a sysbot reported shift-out-of-bounds in xfrm_get_default. From Pavel Skripkin. 2) Fix XFRM_MSG_MAPPING ABI breakage. The new XFRM_MSG_MAPPING messages were accidentally not paced at the end. Fix by Eugene Syromiatnikov. 3) Fix the uapi for the default policy, use explicit field and macros and make it accessible to userland. From Nicolas Dichtel. 4) Fix a missing rcu lock in xfrm_notify_userpolicy(). From Nicolas Dichtel. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23selinux,smack: fix subjective/objective credential use mixupsPaul Moore2-4/+4
Jann Horn reported a problem with commit eb1231f73c4d ("selinux: clarify task subjective and objective credentials") where some LSM hooks were attempting to access the subjective credentials of a task other than the current task. Generally speaking, it is not safe to access another task's subjective credentials and doing so can cause a number of problems. Further, while looking into the problem, I realized that Smack was suffering from a similar problem brought about by a similar commit 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials"). This patch addresses this problem by restoring the use of the task's objective credentials in those cases where the task is other than the current executing task. Not only does this resolve the problem reported by Jann, it is arguably the correct thing to do in these cases. Cc: stable@vger.kernel.org Fixes: eb1231f73c4d ("selinux: clarify task subjective and objective credentials") Fixes: 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials") Reported-by: Jann Horn <jannh@google.com> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-09-14include/uapi/linux/xfrm.h: Fix XFRM_MSG_MAPPING ABI breakageEugene Syromiatnikov1-1/+3
Commit 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy") broke ABI by changing the value of the XFRM_MSG_MAPPING enum item, thus also evading the build-time check in security/selinux/nlmsgtab.c:selinux_nlmsg_lookup for presence of proper security permission checks in nlmsg_xfrm_perms. Fix it by placing XFRM_MSG_SETDEFAULT/XFRM_MSG_GETDEFAULT to the end of the enum, right before __XFRM_MSG_MAX, and updating the nlmsg_xfrm_perms accordingly. Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy") References: https://lore.kernel.org/netdev/20210901151402.GA2557@altlinux.org/ Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Acked-by: Antony Antony <antony.antony@secunet.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-09-03Merge tag 'kbuild-v5.15' of ↵Linus Torvalds1-11/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
2021-09-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-4/+9
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ...
2021-09-03mm/pagemap: add mmap_assert_locked() annotations to find_vma*()Luigi Rizzo1-4/+9
find_vma() and variants need protection when used. This patch adds mmap_assert_lock() calls in the functions. To make sure the invariant is satisfied, we also need to add a mmap_read_lock() around the get_user_pages_remote() call in get_arg_page(). The lock is not strictly necessary because the mm has been newly created, but the extra cost is limited because the same mutex was also acquired shortly before in __bprm_mm_init(), so it is hot and uncontended. [penguin-kernel@i-love.sakura.ne.jp: TOMOYO needs the same protection which get_arg_page() needs] Link: https://lkml.kernel.org/r/58bb6bf7-a57e-8a40-e74b-39584b415152@i-love.sakura.ne.jp Link: https://lkml.kernel.org/r/20210731175341.3458608-1-lrizzo@google.com Signed-off-by: Luigi Rizzo <lrizzo@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03security: remove unneeded subdir-$(CONFIG_...)Masahiro Yamada1-11/+0
All of these are unneeded. The directories to descend are specified by obj-$(CONFIG_...). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-09-02Merge tag 'integrity-v5.15' of ↵Linus Torvalds11-67/+320
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity subsystem updates from Mimi Zohar: - Limit the allowed hash algorithms when writing security.ima xattrs or verifying them, based on the IMA policy and the configured hash algorithms. - Return the calculated "critical data" measurement hash and size to avoid code duplication. (Preparatory change for a proposed LSM.) - and a single patch to address a compiler warning. * tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: IMA: reject unknown hash algorithms in ima_get_hash_algo IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms IMA: introduce a new policy option func=SETXATTR_CHECK IMA: add a policy option to restrict xattr hash algorithms on appraisal IMA: add support to restrict the hash algorithms used for file appraisal IMA: block writes of the security.ima xattr with unsupported algorithms IMA: remove the dependency on CRYPTO_MD5 ima: Add digest and digest_len params to the functions to measure a buffer ima: Return int in the functions to measure a buffer ima: Introduce ima_get_current_hash_algo() IMA: remove -Wmissing-prototypes warning
2021-09-02Merge tag 'hardening-v5.15-rc1' of ↵Linus Torvalds1-20/+51
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - Expand lib/test_stackinit to include more initialization styles - Improve Kconfig for CLang's auto-var-init feature - Introduce support for GCC's zero-call-used-regs feature * tag 'hardening-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lib/test_stackinit: Add assigned initializers lib/test_stackinit: Allow building stand-alone lib/test_stackinit: Fix static initializer test hardening: Clarify Kconfig text for auto-var-init hardening: Introduce CONFIG_ZERO_CALL_USED_REGS
2021-08-31Merge tag 'net-next-5.15' of ↵Linus Torvalds2-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-31Merge tag 'for-5.15/dm-changes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Add DM infrastructure for IMA-based remote attestion. These changes are the basis for deploying DM-based storage in a "cloud" that must validate configurations end-users run to maintain trust. These DM changes allow supported DM targets' configurations to be measured via IMA. But the policy and enforcement (of which configurations are valid) is managed by something outside the kernel (e.g. Keylime). - Fix DM crypt scalability regression on systems with many cpus due to percpu_counter spinlock contention in crypt_page_alloc(). - Use in_hardirq() instead of deprecated in_irq() in DM crypt. - Add event counters to DM writecache to allow users to further assess how the writecache is performing. - Various code cleanup in DM writecache's main IO mapping function. * tag 'for-5.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm crypt: use in_hardirq() instead of deprecated in_irq() dm ima: update dm documentation for ima measurement support dm ima: update dm target attributes for ima measurements dm ima: add a warning in dm_init if duplicate ima events are not measured dm ima: prefix ima event name related to device mapper with dm_ dm ima: add version info to dm related events in ima log dm ima: prefix dm table hashes in ima log with hash algorithm dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc() dm: add documentation for IMA measurement support dm: update target status functions to support IMA measurement dm ima: measure data on device rename dm ima: measure data on table clear dm ima: measure data on device remove dm ima: measure data on device resume dm ima: measure data on table load dm writecache: add event counters dm writecache: report invalid return from writecache_map helpers dm writecache: further writecache_map() cleanup dm writecache: factor out writecache_map_remap_origin() dm writecache: split up writecache_map() to improve code readability
2021-08-31Merge tag 'Smack-for-5.15' of git://github.com/cschaufler/smack-nextLinus Torvalds3-11/+10
Pull smack updates from Casey Schaufler: "There is a variable used only during start-up that's now marked __initdata and a change where the code was working by sheer luck that is now done properly. Both have been in next for several weeks and pass the Smack testsuite" * tag 'Smack-for-5.15' of git://github.com/cschaufler/smack-next: smack: mark 'smack_enabled' global variable as __initdata Smack: Fix wrong semantics in smk_access_entry()
2021-08-31Merge tag 'selinux-pr-20210830' of ↵Linus Torvalds2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux update from Paul Moore: "We've got an unusually small SELinux pull request for v5.15 that consists of only one (?!) patch that is really pretty minor when you look at it. Unsurprisingly it passes all of our tests and merges cleanly on top of your tree right now, please merge this for v5.15" * tag 'selinux-pr-20210830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: return early for possible NULL audit buffers
2021-08-30Merge tag 'efi-core-2021-08-30' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "A handful of EFI changes for this cycle: - EFI CPER parsing improvements - Don't take the address of efi_guid_t internal fields" * tag 'efi-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: cper: check section header more appropriately efi: Don't use knowledge about efi_guid_t internals efi: cper: fix scnprintf() use in cper_mem_err_location()
2021-08-27efi: Don't use knowledge about efi_guid_t internalsAndy Shevchenko1-1/+1
When print GUIDs supply pointer to the efi_guid_t (guid_t) type rather its internal members. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2021-08-23IMA: reject unknown hash algorithms in ima_get_hash_algoTHOBY Simon1-1/+2
The new function validate_hash_algo() assumed that ima_get_hash_algo() always return a valid 'enum hash_algo', but it returned the user-supplied value present in the digital signature without any bounds checks. Update ima_get_hash_algo() to always return a valid hash algorithm, defaulting on 'ima_hash_algo' when the user-supplied value inside the xattr is invalid. Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr> Reported-by: syzbot+e8bafe7b82c739eaf153@syzkaller.appspotmail.com Fixes: 50f742dd9147 ("IMA: block writes of the security.ima xattr with unsupported algorithms") Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-08-16IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithmsTHOBY Simon1-0/+6
SETXATTR_CHECK policy rules assume that any algorithm listed in the 'appraise_algos' flag must be accepted when performing setxattr() on the security.ima xattr. However nothing checks that they are available in the current kernel. A userland application could hash a file with a digest that the kernel wouldn't be able to verify. However, if SETXATTR_CHECK is not in use, the kernel already forbids that xattr write. Verify that algorithms listed in appraise_algos are available to the current kernel and reject the policy update otherwise. This will fix the inconsistency between SETXATTR_CHECK and non-SETXATTR_CHECK behaviors. That filtering is only performed in ima_parse_appraise_algos() when updating policies so that we do not have to pay the price of allocating a hash object every time validate_hash_algo() is called in ima_inode_setxattr(). Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-08-16IMA: introduce a new policy option func=SETXATTR_CHECKTHOBY Simon4-17/+96
While users can restrict the accepted hash algorithms for the security.ima xattr file signature when appraising said file, users cannot restrict the algorithms that can be set on that attribute: any algorithm built in the kernel is accepted on a write. Define a new value for the ima policy option 'func' that restricts globally the hash algorithms accepted when writing the security.ima xattr. When a policy contains a rule of the form appraise func=SETXATTR_CHECK appraise_algos=sha256,sha384,sha512 only values corresponding to one of these three digest algorithms will be accepted for writing the security.ima xattr. Attempting to write the attribute using another algorithm (or "free-form" data) will be denied with an audit log message. In the absence of such a policy rule, the default is still to only accept hash algorithms built in the kernel (with all the limitations that entails). Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-08-16IMA: add a policy option to restrict xattr hash algorithms on appraisalTHOBY Simon1-4/+70
The kernel has the ability to restrict the set of hash algorithms it accepts for the security.ima xattr when it appraises files. Define a new IMA policy rule option "appraise_algos=", using the mentioned mechanism to expose a user-toggable policy knob to opt-in to that restriction and select the desired set of algorithms that must be accepted. When a policy rule uses the 'appraise_algos' option, appraisal of a file referenced by that rule will now fail if the digest algorithm employed to hash the file was not one of those explicitly listed in the option. In its absence, any hash algorithm compiled in the kernel will be accepted. For example, on a system where SELinux is properly deployed, the rule appraise func=BPRM_CHECK obj_type=iptables_exec_t \ appraise_algos=sha256,sha384 will block the execution of iptables if the xattr security.ima of its executables were not hashed with either sha256 or sha384. Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-08-16IMA: add support to restrict the hash algorithms used for file appraisalTHOBY Simon5-12/+41
The kernel accepts any hash algorithm as a value for the security.ima xattr. Users may wish to restrict the accepted algorithms to only support strong cryptographic ones. Provide the plumbing to restrict the permitted set of hash algorithms used for verifying file hashes and signatures stored in security.ima xattr. Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-08-16IMA: block writes of the security.ima xattr with unsupported algorithmsTHOBY Simon2-4/+47
By default, writes to the extended attributes security.ima will be allowed even if the hash algorithm used for the xattr is not compiled in the kernel (which does not make sense because the kernel would not be able to appraise that file as it lacks support for validating the hash). Prevent and audit writes to the security.ima xattr if the hash algorithm used in the new value is not available in the current kernel. Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-08-16IMA: remove the dependency on CRYPTO_MD5THOBY Simon1-1/+0
MD5 is a weak digest algorithm that shouldn't be used for cryptographic operation. It hinders the efficiency of a patch set that aims to limit the digests allowed for the extended file attribute namely security.ima. MD5 is no longer a requirement for IMA, nor should it be used there. The sole place where we still use the MD5 algorithm inside IMA is setting the ima_hash algorithm to MD5, if the user supplies 'ima_hash=md5' parameter on the command line. With commit ab60368ab6a4 ("ima: Fallback to the builtin hash algorithm"), setting "ima_hash=md5" fails gracefully when CRYPTO_MD5 is not set: ima: Can not allocate md5 (reason: -2) ima: Allocating md5 failed, going to use default hash algorithm sha256 Remove the CRYPTO_MD5 dependency for IMA. Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> [zohar@linux.ibm.com: include commit number in patch description for stable.] Cc: stable@vger.kernel.org # 4.17 Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-10dm ima: measure data on table loadTushar Sugandhi1-0/+1
DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-08-10bpf: Add lockdown check for probe_write_user helperDaniel Borkmann1-0/+1
Back then, commit 96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers") added the bpf_probe_write_user() helper in order to allow to override user space memory. Its original goal was to have a facility to "debug, divert, and manipulate execution of semi-cooperative processes" under CAP_SYS_ADMIN. Write to kernel was explicitly disallowed since it would otherwise tamper with its integrity. One use case was shown in cf9b1199de27 ("samples/bpf: Add test/example of using bpf_probe_write_user bpf helper") where the program DNATs traffic at the time of connect(2) syscall, meaning, it rewrites the arguments to a syscall while they're still in userspace, and before the syscall has a chance to copy the argument into kernel space. These days we have better mechanisms in BPF for achieving the same (e.g. for load-balancers), but without having to write to userspace memory. Of course the bpf_probe_write_user() helper can also be used to abuse many other things for both good or bad purpose. Outside of BPF, there is a similar mechanism for ptrace(2) such as PTRACE_PEEK{TEXT,DATA} and PTRACE_POKE{TEXT,DATA}, but would likely require some more effort. Commit 96ae52279594 explicitly dedicated the helper for experimentation purpose only. Thus, move the helper's availability behind a newly added LOCKDOWN_BPF_WRITE_USER lockdown knob so that the helper is disabled under the "integrity" mode. More fine-grained control can be implemented also from LSM side with this change. Fixes: 96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org>
2021-08-09bpf: Add _kernel suffix to internal lockdown_bpf_readDaniel Borkmann1-1/+1
Rename LOCKDOWN_BPF_READ into LOCKDOWN_BPF_READ_KERNEL so we have naming more consistent with a LOCKDOWN_BPF_WRITE_USER option that we are adding. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org>
2021-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-6/+4
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05Merge tag 'selinux-pr-20210805' of ↵Linus Torvalds1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "One small SELinux fix for a problem where an error code was not being propagated back up to userspace when a bogus SELinux policy is loaded into the kernel" * tag 'selinux-pr-20210805' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: correct the return value when loads initial sids
2021-08-02selinux: correct the return value when loads initial sidsXiu Jianfeng1-6/+4
It should not return 0 when SID 0 is assigned to isids. This patch fixes it. Cc: stable@vger.kernel.org Fixes: e3e0b582c321a ("selinux: remove unused initial SIDs and improve handling") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> [PM: remove changelog from description] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-07-29mctp: Add MCTP baseJeremy Kerr2-2/+6
Add basic Kconfig, an initial (empty) af_mctp source object, and {AF,PF}_MCTP definitions, and the required definitions for a new protocol type. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23ima: Add digest and digest_len params to the functions to measure a bufferRoberto Sassu7-17/+36
This patch performs the final modification necessary to pass the buffer measurement to callers, so that they provide a functionality similar to ima_file_hash(). It adds the 'digest' and 'digest_len' parameters to ima_measure_critical_data() and process_buffer_measurement(). These functions calculate the digest even if there is no suitable rule in the IMA policy and, in this case, they simply return 1 before generating a new measurement entry. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-07-23ima: Return int in the functions to measure a bufferRoberto Sassu2-22/+28
ima_measure_critical_data() and process_buffer_measurement() currently don't return a result as, unlike appraisal-related functions, the result is not used by callers to deny an operation. Measurement-related functions instead rely on the audit subsystem to notify the system administrator when an error occurs. However, ima_measure_critical_data() and process_buffer_measurement() are a special case, as these are the only functions that can return a buffer measurement (for files, there is ima_file_hash()). In a subsequent patch, they will be modified to return the calculated digest. In preparation to return the result of the digest calculation, this patch modifies the return type from void to int, and returns 0 if the buffer has been successfully measured, a negative value otherwise. Given that the result of the measurement is still not necessary, this patch does not modify the behavior of existing callers by processing the returned value. For those, the return value is ignored. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Acked-by: Paul Moore <paul@paul-moore.com> (for the SELinux bits) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-07-23ima: Introduce ima_get_current_hash_algo()Roberto Sassu1-1/+6
Buffer measurements, unlike file measurements, are not accessible after the measurement is done, as buffers are not suitable for use with the integrity_iint_cache structure (there is no index, for files it is the inode number). In the subsequent patches, the measurement (digest) will be returned directly by the functions that perform the buffer measurement, ima_measure_critical_data() and process_buffer_measurement(). A caller of those functions also needs to know the algorithm used to calculate the digest. Instead of adding the algorithm as a new parameter to the functions, this patch provides it separately with the new function ima_get_current_hash_algo(). Since the hash algorithm does not change after the IMA setup phase, there is no risk of races (obtaining a digest calculated with a different algorithm than the one returned). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> [zohar@linux.ibm.com: annotate ima_hash_algo as __ro_after_init] Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-07-23IMA: remove -Wmissing-prototypes warningAustin Kim1-1/+1
With W=1 build, the compiler throws warning message as below: security/integrity/ima/ima_mok.c:24:12: warning: no previous prototype for ‘ima_mok_init’ [-Wmissing-prototypes] __init int ima_mok_init(void) Silence the warning by adding static keyword to ima_mok_init(). Signed-off-by: Austin Kim <austin.kim@lge.com> Fixes: 41c89b64d718 ("IMA: create machine owner and blacklist keyrings") Cc: stable@vger.kernel.org Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-07-20hardening: Clarify Kconfig text for auto-var-initKees Cook1-20/+32
Clarify the details around the automatic variable initialization modes available. Specifically this details the values used for pattern init and expands on the rationale for zero init safety. Additionally makes zero init the default when available. Cc: glider@google.com Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: linux-security-module@vger.kernel.org Cc: clang-built-linux@googlegroups.com Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-20hardening: Introduce CONFIG_ZERO_CALL_USED_REGSKees Cook1-0/+19
When CONFIG_ZERO_CALL_USED_REGS is enabled, build the kernel with "-fzero-call-used-regs=used-gpr" (in GCC 11). This option will zero any caller-used register contents just before returning from a function, ensuring that temporary values are not leaked beyond the function boundary. This means that register contents are less likely to be available for side channel attacks and information exposures. Additionally this helps reduce the number of useful ROP gadgets in the kernel image by about 20%: $ ROPgadget.py --nosys --nojop --binary vmlinux.stock | tail -n1 Unique gadgets found: 337245 $ ROPgadget.py --nosys --nojop --binary vmlinux.zero-call-regs | tail -n1 Unique gadgets found: 267175 and more notably removes simple "write-what-where" gadgets: $ ROPgadget.py --ropchain --binary vmlinux.stock | sed -n '/Step 1/,/Step 2/p' - Step 1 -- Write-what-where gadgets [+] Gadget found: 0xffffffff8102d76c mov qword ptr [rsi], rdx ; ret [+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret [+] Gadget found: 0xffffffff8104d7c8 pop rdx ; ret [-] Can't find the 'xor rdx, rdx' gadget. Try with another 'mov [reg], reg' [+] Gadget found: 0xffffffff814c2b4c mov qword ptr [rsi], rdi ; ret [+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret [+] Gadget found: 0xffffffff81001e51 pop rdi ; ret [-] Can't find the 'xor rdi, rdi' gadget. Try with another 'mov [reg], reg' [+] Gadget found: 0xffffffff81540d61 mov qword ptr [rsi], rdi ; pop rbx ; pop rbp ; ret [+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret [+] Gadget found: 0xffffffff81001e51 pop rdi ; ret [-] Can't find the 'xor rdi, rdi' gadget. Try with another 'mov [reg], reg' [+] Gadget found: 0xffffffff8105341e mov qword ptr [rsi], rax ; ret [+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret [+] Gadget found: 0xffffffff81029a11 pop rax ; ret [+] Gadget found: 0xffffffff811f1c3b xor rax, rax ; ret - Step 2 -- Init syscall number gadgets $ ROPgadget.py --ropchain --binary vmlinux.zero* | sed -n '/Step 1/,/Step 2/p' - Step 1 -- Write-what-where gadgets [-] Can't find the 'mov qword ptr [r64], r64' gadget For an x86_64 parallel build tests, this has a less than 1% performance impact, and grows the image size less than 1%: $ size vmlinux.stock vmlinux.zero-call-regs text data bss dec hex filename 22437676 8559152 14127340 45124168 2b08a48 vmlinux.stock 22453184 8563248 14110956 45127388 2b096dc vmlinux.zero-call-regs Impact for other architectures may vary. For example, arm64 sees a 5.5% image size growth, mainly due to needing to always clear x16 and x17: https://lore.kernel.org/lkml/20210510134503.GA88495@C02TD0UTHF1T.local/ Signed-off-by: Kees Cook <keescook@chromium.org>
2021-07-20smack: mark 'smack_enabled' global variable as __initdataAustin Kim2-2/+2
Mark 'smack_enabled' as __initdata since it is only used during initialization code. Signed-off-by: Austin Kim <austin.kim@lge.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2021-07-20Smack: Fix wrong semantics in smk_access_entry()Tianjia Zhang1-9/+8
In the smk_access_entry() function, if no matching rule is found in the rust_list, a negative error code will be used to perform bit operations with the MAY_ enumeration value. This is semantically wrong. This patch fixes this issue. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2021-07-14selinux: return early for possible NULL audit buffersAustin Kim2-0/+6
audit_log_start() may return NULL in below cases: - when audit is not initialized. - when audit backlog limit exceeds. After the call to audit_log_start() is made and then possible NULL audit buffer argument is passed to audit_log_*() functions, audit_log_*() functions return immediately in case of a NULL audit buffer argument. But it is optimal to return early when audit_log_start() returns NULL, because it is not necessary for audit_log_*() functions to be called with NULL audit buffer argument. So add exception handling for possible NULL audit buffers where return value can be handled from callers. Signed-off-by: Austin Kim <austin.kim@lge.com> [PM: tweak subject line] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-07-02Merge tag 'asm-generic-unaligned-5.14' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm/unaligned.h unification from Arnd Bergmann: "Unify asm/unaligned.h around struct helper The get_unaligned()/put_unaligned() helpers are traditionally architecture specific, with the two main variants being the "access-ok.h" version that assumes unaligned pointer accesses always work on a particular architecture, and the "le-struct.h" version that casts the data to a byte aligned type before dereferencing, for architectures that cannot always do unaligned accesses in hardware. Based on the discussion linked below, it appears that the access-ok version is not realiable on any architecture, but the struct version probably has no downsides. This series changes the code to use the same implementation on all architectures, addressing the few exceptions separately" Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/ Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363 Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/ Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2 Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/ * tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: simplify asm/unaligned.h asm-generic: uaccess: 1-byte access is always aligned netpoll: avoid put_unaligned() on single character mwifiex: re-fix for unaligned accesses apparmor: use get_unaligned() only for multi-byte words partitions: msdos: fix one-byte get_unaligned() asm-generic: unaligned always use struct helpers asm-generic: unaligned: remove byteshift helpers powerpc: use linux/unaligned/le_struct.h on LE power7 m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS sh: remove unaligned access for sh4a openrisc: always use unaligned-struct header asm-generic: use asm-generic/unaligned.h for most architectures
2021-06-30Merge tag 'safesetid-5.14' of git://github.com/micah-morton/linuxLinus Torvalds2-2/+2
Pull SafeSetID update from Micah Morton: "One very minor code cleanup change that marks a variable as __initdata" * tag 'safesetid-5.14' of git://github.com/micah-morton/linux: LSM: SafeSetID: Mark safesetid_initialized as __initdata
2021-06-30Merge tag 'Smack-for-5.14' of git://github.com/cschaufler/smack-nextLinus Torvalds2-5/+9
Pull smack updates from Casey Schaufler: "There is nothing more significant than an improvement to a byte count check in smackfs. All changes have been in next for weeks" * tag 'Smack-for-5.14' of git://github.com/cschaufler/smack-next: Smack: fix doc warning Revert "Smack: Handle io_uring kernel thread privileges" smackfs: restrict bytes count in smk_set_cipso() security/smack/: fix misspellings using codespell tool
2021-06-30Merge tag 'audit-pr-20210629' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Another merge window, another small audit pull request. Four patches in total: one is cosmetic, one removes an unnecessary initialization, one renames some enum values to prevent name collisions, and one converts list_del()/list_add() to list_move(). None of these are earth shattering and all pass the audit-testsuite tests while merging cleanly on top of your tree from earlier today" * tag 'audit-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: remove unnecessary 'ret' initialization audit: remove trailing spaces and tabs audit: Use list_move instead of list_del/list_add audit: Rename enum audit_state constants to avoid AUDIT_DISABLED redefinition audit: add blank line after variable declarations
2021-06-30Merge tag 'selinux-pr-20210629' of ↵Linus Torvalds11-109/+81
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux updates from Paul Moore: - The slow_avc_audit() function is now non-blocking so we can remove the AVC_NONBLOCKING tricks; this also includes the 'flags' variant of avc_has_perm(). - Use kmemdup() instead of kcalloc()+copy when copying parts of the SELinux policydb. - The InfiniBand device name is now passed by reference when possible in the SELinux code, removing a strncpy(). - Minor cleanups including: constification of avtab function args, removal of useless LSM/XFRM function args, SELinux kdoc fixes, and removal of redundant assignments. * tag 'selinux-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: kill 'flags' argument in avc_has_perm_flags() and avc_audit() selinux: slow_avc_audit has become non-blocking selinux: Fix kernel-doc selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC lsm_audit,selinux: pass IB device name by reference selinux: Remove redundant assignment to rc selinux: Corrected comment to match kernel-doc comment selinux: delete selinux_xfrm_policy_lookup() useless argument selinux: constify some avtab function arguments selinux: simplify duplicate_policydb_cond_list() by using kmemdup()
2021-06-28Merge tag 'integrity-v5.14' of ↵Linus Torvalds18-75/+730
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity subsystem updates from Mimi Zohar: "The large majority of the changes are EVM portable & immutable signature related: removing a dependency on loading an HMAC key, safely allowing file metadata included in the EVM portable & immutable signatures to be modified, allowing EVM signatures to fulfill IMA file signature policy requirements, including the EVM file metadata signature in lieu of an IMA file data signature in the measurement list, and adding dynamic debugging of EVM file metadata. In addition, in order to detect critical data or file change reversions, duplicate measurement records are permitted in the IMA measurement list. The remaining patches address compiler, sparse, and doc warnings" * tag 'integrity-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: (31 commits) evm: Check xattr size discrepancy between kernel and user evm: output EVM digest calculation info IMA: support for duplicate measurement records ima: Fix warning: no previous prototype for function 'ima_add_kexec_buffer' ima: differentiate between EVM failures in the audit log ima: Fix fall-through warning for Clang ima: Pass NULL instead of 0 to ima_get_action() in ima_file_mprotect() ima: Include header defining ima_post_key_create_or_update() ima/evm: Fix type mismatch ima: Set correct casting types doc: Fix warning in Documentation/security/IMA-templates.rst evm: Don't return an error in evm_write_xattrs() if audit is not enabled ima: Define new template evm-sig ima: Define new template fields xattrnames, xattrlengths and xattrvalues evm: Verify portable signatures against all protected xattrs ima: Define new template field imode ima: Define new template fields iuid and igid ima: Add ima_show_template_uint() template library function ima: Don't remove security.ima if file must not be appraised ima: Introduce template field evmsig and write to field sig as fallback ...
2021-06-21evm: Check xattr size discrepancy between kernel and userRoberto Sassu1-1/+7
The kernel and the user obtain an xattr value in two different ways: kernel (EVM): uses vfs_getxattr_alloc() which obtains the xattr value from the filesystem handler (raw value); user (ima-evm-utils): uses vfs_getxattr() which obtains the xattr value from the LSMs (normalized value). Normally, this does not have an impact unless security.selinux is set with setfattr, with a value not terminated by '\0' (this is not the recommended way, security.selinux should be set with the appropriate tools such as chcon and restorecon). In this case, the kernel and the user see two different xattr values: the former sees the xattr value without '\0' (raw value), the latter sees the value with '\0' (value normalized by SELinux). This could result in two different verification outcomes from EVM and ima-evm-utils, if a signature was calculated with a security.selinux value terminated by '\0' and the value set in the filesystem is not terminated by '\0'. The former would report verification failure due to the missing '\0', while the latter would report verification success (because it gets the normalized value with '\0'). This patch mitigates this issue by comparing in evm_calc_hmac_or_hash() the size of the xattr returned by the two xattr functions and by warning the user if there is a discrepancy. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-06-20evm: output EVM digest calculation infoMimi Zohar2-0/+47
Output the data used in calculating the EVM digest and the resulting digest as ascii hexadecimal strings. Suggested-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> (CONFIG_DYNAMIC_DEBUG) Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Reported-by: kernel test robot <lkp@intel.com> (Use %zu for size_t) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-06-16tomoyo: fix doc warningsChenXiaoSong4-9/+9
Fix gcc W=1 warnings: security/tomoyo/audit.c:331: warning: Function parameter or member 'matched_acl' not described in 'tomoyo_get_audit' security/tomoyo/securityfs_if.c:146: warning: Function parameter or member 'inode' not described in 'tomoyo_release' security/tomoyo/tomoyo.c:122: warning: Function parameter or member 'path' not described in 'tomoyo_inode_getattr' security/tomoyo/tomoyo.c:497: warning: Function parameter or member 'clone_flags' not described in 'tomoyo_task_alloc' security/tomoyo/util.c:92: warning: Function parameter or member 'time64' not described in 'tomoyo_convert_time' Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> [ penguin-kernel: Also adjust spaces and similar warnings ] Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 13:39:24 +0000