summaryrefslogtreecommitdiffstats
path: root/security
AgeCommit message (Collapse)AuthorFilesLines
2020-07-08integrity/ima: switch to using __kernel_readChristoph Hellwig1-13/+1
__kernel_read has a bunch of additional sanity checks, and this moves the set_fs out of non-core code. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-30Merge tag 'fixes-v5.8-rc3-a' of ↵Linus Torvalds1-1/+16
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: "Two simple fixes for v5.8: - Fix hook iteration and default value for inode_copy_up_xattr (KP Singh) - Fix the key_permission LSM hook function type (Sami Tolvanen)" * tag 'fixes-v5.8-rc3-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: Fix hook iteration and default value for inode_copy_up_xattr security: fix the key_permission LSM hook function type
2020-06-24ima: extend boot_aggregate with kernel measurementsMaurizio Drocco2-2/+15
Registers 8-9 are used to store measurements of the kernel and its command line (e.g., grub2 bootloader with tpm module enabled). IMA should include them in the boot aggregate. Registers 8-9 should be only included in non-SHA1 digests to avoid ambiguity. Signed-off-by: Maurizio Drocco <maurizio.drocco@ibm.com> Reviewed-by: Bruno Meneguele <bmeneg@redhat.com> Tested-by: Bruno Meneguele <bmeneg@redhat.com> (TPM 1.2, TPM 2.0) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-06-23security: Fix hook iteration and default value for inode_copy_up_xattrKP Singh1-1/+16
inode_copy_up_xattr returns 0 to indicate the acceptance of the xattr and 1 to reject it. If the LSM does not know about the xattr, it's expected to return -EOPNOTSUPP, which is the correct default value for this hook. BPF LSM, currently, uses 0 as the default value and thereby falsely allows all overlay fs xattributes to be copied up. The iteration logic is also updated from the "bail-on-fail" call_int_hook to continue on the non-decisive -EOPNOTSUPP and bail out on other values. Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks") Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: James Morris <jmorris@namei.org>
2020-06-21Merge tag 'selinux-pr-20200621' of ↵Linus Torvalds2-13/+12
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux fixes from Paul Moore: "Three small patches to fix problems in the SELinux code, all found via clang. Two patches fix potential double-free conditions and one fixes an undefined return value" * tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix undefined return of cond_evaluate_expr selinux: fix a double free in cond_read_node()/cond_read_list() selinux: fix double free
2020-06-17selinux: fix undefined return of cond_evaluate_exprTom Rix1-0/+3
clang static analysis reports an undefined return security/selinux/ss/conditional.c:79:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return s[0]; ^~~~~~~~~~~ static int cond_evaluate_expr( ... { u32 i; int s[COND_EXPR_MAXDEPTH]; for (i = 0; i < expr->len; i++) ... return s[0]; When expr->len is 0, the loop which sets s[0] never runs. So return -1 if the loop never runs. Cc: stable@vger.kernel.org Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-06-16selinux: fix a double free in cond_read_node()/cond_read_list()Tom Rix1-13/+5
Clang static analysis reports this double free error security/selinux/ss/conditional.c:139:2: warning: Attempt to free released memory [unix.Malloc] kfree(node->expr.nodes); ^~~~~~~~~~~~~~~~~~~~~~~ When cond_read_node fails, it calls cond_node_destroy which frees the node but does not poison the entry in the node list. So when it returns to its caller cond_read_list, cond_read_list deletes the partial list. The latest entry in the list will be deleted twice. So instead of freeing the node in cond_read_node, let list freeing in code_read_list handle the freeing the problem node along with all of the earlier nodes. Because cond_read_node no longer does any error handling, the goto's the error case are redundant. Instead just return the error code. Cc: stable@vger.kernel.org Fixes: 60abd3181db2 ("selinux: convert cond_list to array") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> [PM: subject line tweaks] Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-06-15ima: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-2/+2
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-14Merge tag 'LSM-add-setgid-hook-5.8-author-fix' of ↵Linus Torvalds1-0/+6
git://github.com/micah-morton/linux Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
2020-06-14security: Add LSM hooks to set*gid syscallsThomas Cedeno1-0/+6
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by: Thomas Cedeno <thomascedeno@google.com> Signed-off-by: Micah Morton <mortonm@chromium.org>
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-3/+3
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-13Merge tag 'notifications-20200601' of ↵Linus Torvalds13-87/+407
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull notification queue from David Howells: "This adds a general notification queue concept and adds an event source for keys/keyrings, such as linking and unlinking keys and changing their attributes. Thanks to Debarshi Ray, we do have a pull request to use this to fix a problem with gnome-online-accounts - as mentioned last time: https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47 Without this, g-o-a has to constantly poll a keyring-based kerberos cache to find out if kinit has changed anything. [ There are other notification pending: mount/sb fsinfo notifications for libmount that Karel Zak and Ian Kent have been working on, and Christian Brauner would like to use them in lxc, but let's see how this one works first ] LSM hooks are included: - A set of hooks are provided that allow an LSM to rule on whether or not a watch may be set. Each of these hooks takes a different "watched object" parameter, so they're not really shareable. The LSM should use current's credentials. [Wanted by SELinux & Smack] - A hook is provided to allow an LSM to rule on whether or not a particular message may be posted to a particular queue. This is given the credentials from the event generator (which may be the system) and the watch setter. [Wanted by Smack] I've provided SELinux and Smack with implementations of some of these hooks. WHY === Key/keyring notifications are desirable because if you have your kerberos tickets in a file/directory, your Gnome desktop will monitor that using something like fanotify and tell you if your credentials cache changes. However, we also have the ability to cache your kerberos tickets in the session, user or persistent keyring so that it isn't left around on disk across a reboot or logout. Keyrings, however, cannot currently be monitored asynchronously, so the desktop has to poll for it - not so good on a laptop. This facility will allow the desktop to avoid the need to poll. DESIGN DECISIONS ================ - The notification queue is built on top of a standard pipe. Messages are effectively spliced in. The pipe is opened with a special flag: pipe2(fds, O_NOTIFICATION_PIPE); The special flag has the same value as O_EXCL (which doesn't seem like it will ever be applicable in this context)[?]. It is given up front to make it a lot easier to prohibit splice&co from accessing the pipe. [?] Should this be done some other way? I'd rather not use up a new O_* flag if I can avoid it - should I add a pipe3() system call instead? The pipe is then configured:: ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth); ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter); Messages are then read out of the pipe using read(). - It should be possible to allow write() to insert data into the notification pipes too, but this is currently disabled as the kernel has to be able to insert messages into the pipe *without* holding pipe->mutex and the code to make this work needs careful auditing. - sendfile(), splice() and vmsplice() are disabled on notification pipes because of the pipe->mutex issue and also because they sometimes want to revert what they just did - but one or more notification messages might've been interleaved in the ring. - The kernel inserts messages with the wait queue spinlock held. This means that pipe_read() and pipe_write() have to take the spinlock to update the queue pointers. - Records in the buffer are binary, typed and have a length so that they can be of varying size. This allows multiple heterogeneous sources to share a common buffer; there are 16 million types available, of which I've used just a few, so there is scope for others to be used. Tags may be specified when a watchpoint is created to help distinguish the sources. - Records are filterable as types have up to 256 subtypes that can be individually filtered. Other filtration is also available. - Notification pipes don't interfere with each other; each may be bound to a different set of watches. Any particular notification will be copied to all the queues that are currently watching for it - and only those that are watching for it. - When recording a notification, the kernel will not sleep, but will rather mark a queue as having lost a message if there's insufficient space. read() will fabricate a loss notification message at an appropriate point later. - The notification pipe is created and then watchpoints are attached to it, using one of: keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01); watch_mount(AT_FDCWD, "/", 0, fd, 0x02); watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03); where in both cases, fd indicates the queue and the number after is a tag between 0 and 255. - Watches are removed if either the notification pipe is destroyed or the watched object is destroyed. In the latter case, a message will be generated indicating the enforced watch removal. Things I want to avoid: - Introducing features that make the core VFS dependent on the network stack or networking namespaces (ie. usage of netlink). - Dumping all this stuff into dmesg and having a daemon that sits there parsing the output and distributing it as this then puts the responsibility for security into userspace and makes handling namespaces tricky. Further, dmesg might not exist or might be inaccessible inside a container. - Letting users see events they shouldn't be able to see. TESTING AND MANPAGES ==================== - The keyutils tree has a pipe-watch branch that has keyctl commands for making use of notifications. Proposed manual pages can also be found on this branch, though a couple of them really need to go to the main manpages repository instead. If the kernel supports the watching of keys, then running "make test" on that branch will cause the testing infrastructure to spawn a monitoring process on the side that monitors a notifications pipe for all the key/keyring changes induced by the tests and they'll all be checked off to make sure they happened. https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch - A test program is provided (samples/watch_queue/watch_test) that can be used to monitor for keyrings, mount and superblock events. Information on the notifications is simply logged to stdout" * tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: smack: Implement the watch_key and post_notification hooks selinux: Implement the watch_key security hook keys: Make the KEY_NEED_* perms an enum rather than a mask pipe: Add notification lossage handling pipe: Allow buffers to be marked read-whole-or-error for notifications Add sample notification program watch_queue: Add a key/keyring notification facility security: Add hooks to rule on setting a watch pipe: Add general notification queue support pipe: Add O_NOTIFICATION_PIPE security: Add a hook for the point of notification insertion uapi: General notification queue definitions
2020-06-12Merge tag 'integrity-v5.8-fix' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fix from Mimi Zohar: "ima mprotect performance fix" * tag 'integrity-v5.8-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: fix mprotect checking
2020-06-12ima: fix mprotect checkingMimi Zohar1-1/+2
Make sure IMA is enabled before checking mprotect change. Addresses report of a 3.7% regression of boot-time.dhcp. Fixes: 8eb613c0b8f1 ("ima: verify mprotect change is consistent with mmap policy") Reported-by: kernel test robot <rong.a.chen@intel.com> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-06-10selinux: fix double freeTom Rix1-0/+4
Clang's static analysis tool reports these double free memory errors. security/selinux/ss/services.c:2987:4: warning: Attempt to free released memory [unix.Malloc] kfree(bnames[i]); ^~~~~~~~~~~~~~~~ security/selinux/ss/services.c:2990:2: warning: Attempt to free released memory [unix.Malloc] kfree(bvalues); ^~~~~~~~~~~~~~ So improve the security_get_bools error handling by freeing these variables and setting their return pointers to NULL and the return len to 0 Cc: stable@vger.kernel.org Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-06-09Merge tag 'ovl-update-5.8' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: "Fixes: - Resolve mount option conflicts consistently - Sync before remount R/O - Fix file handle encoding corner cases - Fix metacopy related issues - Fix an unintialized return value - Add missing permission checks for underlying layers Optimizations: - Allow multipe whiteouts to share an inode - Optimize small writes by inheriting SB_NOSEC from upper layer - Do not call ->syncfs() multiple times for sync(2) - Do not cache negative lookups on upper layer - Make private internal mounts longterm" * tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (27 commits) ovl: remove unnecessary lock check ovl: make oip->index bool ovl: only pass ->ki_flags to ovl_iocb_to_rwf() ovl: make private mounts longterm ovl: get rid of redundant members in struct ovl_fs ovl: add accessor for ofs->upper_mnt ovl: initialize error in ovl_copy_xattr ovl: drop negative dentry in upper layer ovl: check permission to open real file ovl: call secutiry hook in ovl_real_ioctl() ovl: verify permissions in ovl_path_open() ovl: switch to mounter creds in readdir ovl: pass correct flags for opening real directory ovl: fix redirect traversal on metacopy dentries ovl: initialize OVL_UPPERDATA in ovl_lookup() ovl: use only uppermetacopy state in ovl_lookup() ovl: simplify setting of origin for index lookup ovl: fix out of bounds access warning in ovl_check_fb_len() ovl: return required buffer size for file handles ovl: sync dirty data when remounting to ro mode ...
2020-06-09Merge tag 'linux-kselftest-kunit-5.8-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit updates from Shuah Khan: "This consists of: - Several config fragment fixes from Anders Roxell to improve test coverage. - Improvements to kunit run script to use defconfig as default and restructure the code for config/build/exec/parse from Vitor Massaru Iha and David Gow. - Miscellaneous documentation warn fix" * tag 'linux-kselftest-kunit-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: security: apparmor: default KUNIT_* fragments to KUNIT_ALL_TESTS fs: ext4: default KUNIT_* fragments to KUNIT_ALL_TESTS drivers: base: default KUNIT_* fragments to KUNIT_ALL_TESTS lib: Kconfig.debug: default KUNIT_* fragments to KUNIT_ALL_TESTS kunit: default KUNIT_* fragments to KUNIT_ALL_TESTS kunit: Kconfig: enable a KUNIT_ALL_TESTS fragment kunit: Fix TabError, remove defconfig code and handle when there is no kunitconfig kunit: use KUnit defconfig by default kunit: use --build_dir=.kunit as default Documentation: test.h - fix warnings kunit: kunit_tool: Separate out config/build/exec/parse
2020-06-09mmap locking API: convert mmap_sem commentsMichel Lespinasse1-1/+1
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-07Merge tag 'apparmor-pr-2020-06-07' of ↵Linus Torvalds11-119/+185
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor updates from John Johansen: "Features: - Replace zero-length array with flexible-array - add a valid state flags check - add consistency check between state and dfa diff encode flags - add apparmor subdir to proc attr interface - fail unpack if profile mode is unknown - add outofband transition and use it in xattr match - ensure that dfa state tables have entries Cleanups: - Use true and false for bool variable - Remove semicolon - Clean code by removing redundant instructions - Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint() - remove duplicate check of xattrs on profile attachment - remove useless aafs_create_symlink Bug fixes: - Fix memory leak of profile proxy - fix introspection of of task mode for unconfined tasks - fix nnp subset test for unconfined - check/put label on apparmor_sk_clone_security()" * tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: Fix memory leak of profile proxy apparmor: fix introspection of of task mode for unconfined tasks apparmor: check/put label on apparmor_sk_clone_security() apparmor: Use true and false for bool variable security/apparmor/label.c: Clean code by removing redundant instructions apparmor: Replace zero-length array with flexible-array apparmor: ensure that dfa state tables have entries apparmor: remove duplicate check of xattrs on profile attachment. apparmor: add outofband transition and use it in xattr match apparmor: fail unpack if profile mode is unknown apparmor: fix nnp subset test for unconfined apparmor: remove useless aafs_create_symlink apparmor: add proc subdir to attrs apparmor: add consistency check between state and dfa diff encode flags apparmor: add a valid state flags check AppArmor: Remove semicolon apparmor: Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
2020-06-07ima: Remove __init annotation from ima_pcrread()Roberto Sassu1-1/+1
Commit 6cc7c266e5b4 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()") added a call to ima_calc_boot_aggregate() so that the digest can be recalculated for the boot_aggregate measurement entry if the 'd' template field has been requested. For the 'd' field, only SHA1 and MD5 digests are accepted. Given that ima_eventdigest_init() does not have the __init annotation, all functions called should not have it. This patch removes __init from ima_pcrread(). Cc: stable@vger.kernel.org Fixes: 6cc7c266e5b4 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-07apparmor: Fix memory leak of profile proxyJohn Johansen3-6/+9
When the proxy isn't replaced and the profile is removed, the proxy is being leaked resulting in a kmemleak check message of unreferenced object 0xffff888077a3a490 (size 16): comm "apparmor_parser", pid 128041, jiffies 4322684109 (age 1097.028s) hex dump (first 16 bytes): 03 00 00 00 00 00 00 00 b0 92 fd 4b 81 88 ff ff ...........K.... backtrace: [<0000000084d5daf2>] aa_alloc_proxy+0x58/0xe0 [<00000000ecc0e21a>] aa_alloc_profile+0x159/0x1a0 [<000000004cc9ce15>] unpack_profile+0x275/0x1c40 [<000000007332b3ca>] aa_unpack+0x1e7/0x7e0 [<00000000e25e31bd>] aa_replace_profiles+0x18a/0x1d10 [<00000000350d9415>] policy_update+0x237/0x650 [<000000003fbf934e>] profile_load+0x122/0x160 [<0000000047f7b781>] vfs_write+0x139/0x290 [<000000008ad12358>] ksys_write+0xcd/0x170 [<000000001a9daa7b>] do_syscall_64+0x70/0x310 [<00000000b9efb0cf>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Make sure to cleanup the profile's embedded label which will result on the proxy being properly freed. Fixes: 637f688dc3dc ("apparmor: switch from profiles to using labels on contexts") Signed-off-by: John Johansen <john.johansen@canonical.com>
2020-06-07apparmor: fix introspection of of task mode for unconfined tasksJohn Johansen1-2/+2
Fix two issues with introspecting the task mode. 1. If a task is attached to a unconfined profile that is not the ns->unconfined profile then. Mode the mode is always reported as - $ ps -Z LABEL PID TTY TIME CMD unconfined 1287 pts/0 00:00:01 bash test (-) 1892 pts/0 00:00:00 ps instead of the correct value of (unconfined) as shown below $ ps -Z LABEL PID TTY TIME CMD unconfined 2483 pts/0 00:00:01 bash test (unconfined) 3591 pts/0 00:00:00 ps 2. if a task is confined by a stack of profiles that are unconfined the output of label mode is again the incorrect value of (-) like above, instead of (unconfined). This is because the visibile profile count increment is skipped by the special casing of unconfined. Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels") Signed-off-by: John Johansen <john.johansen@canonical.com>
2020-06-07apparmor: check/put label on apparmor_sk_clone_security()Mauricio Faria de Oliveira1-0/+5
Currently apparmor_sk_clone_security() does not check for existing label/peer in the 'new' struct sock; it just overwrites it, if any (with another reference to the label of the source sock.) static void apparmor_sk_clone_security(const struct sock *sk, struct sock *newsk) { struct aa_sk_ctx *ctx = SK_CTX(sk); struct aa_sk_ctx *new = SK_CTX(newsk); new->label = aa_get_label(ctx->label); new->peer = aa_get_label(ctx->peer); } This might leak label references, which might overflow under load. Thus, check for and put labels, to prevent such errors. Note this is similarly done on: static int apparmor_socket_post_create(struct socket *sock, ...) ... if (sock->sk) { struct aa_sk_ctx *ctx = SK_CTX(sock->sk); aa_put_label(ctx->label); ctx->label = aa_get_label(label); } ... Context: ------- The label reference count leak is observed if apparmor_sock_graft() is called previously: this sets the 'ctx->label' field by getting a reference to the current label (later overwritten, without put.) static void apparmor_sock_graft(struct sock *sk, ...) { struct aa_sk_ctx *ctx = SK_CTX(sk); if (!ctx->label) ctx->label = aa_get_current_label(); } And that is the case on crypto/af_alg.c:af_alg_accept(): int af_alg_accept(struct sock *sk, struct socket *newsock, ...) ... struct sock *sk2; ... sk2 = sk_alloc(...); ... security_sock_graft(sk2, newsock); security_sk_clone(sk, sk2); ... Apparently both calls are done on their own right, especially for other LSMs, being introduced in 2010/2014, before apparmor socket mediation in 2017 (see commits [1,2,3,4]). So, it looks OK there! Let's fix the reference leak in apparmor. Test-case: --------- Exercise that code path enough to overflow label reference count. $ cat aa-refcnt-af_alg.c #include <stdio.h> #include <string.h> #include <unistd.h> #include <sys/socket.h> #include <linux/if_alg.h> int main() { int sockfd; struct sockaddr_alg sa; /* Setup the crypto API socket */ sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0); if (sockfd < 0) { perror("socket"); return 1; } memset(&sa, 0, sizeof(sa)); sa.salg_family = AF_ALG; strcpy((char *) sa.salg_type, "rng"); strcpy((char *) sa.salg_name, "stdrng"); if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) { perror("bind"); return 1; } /* Accept a "connection" and close it; repeat. */ while (!close(accept(sockfd, NULL, 0))); return 0; } $ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c $ ./aa-refcnt-af_alg <a few hours later> [ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000 ... [ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70 ... [ 9928.514286] security_sk_clone+0x33/0x50 [ 9928.514807] af_alg_accept+0x81/0x1c0 [af_alg] [ 9928.516091] alg_accept+0x15/0x20 [af_alg] [ 9928.516682] SYSC_accept4+0xff/0x210 [ 9928.519609] SyS_accept+0x10/0x20 [ 9928.520190] do_syscall_64+0x73/0x130 [ 9928.520808] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Note that other messages may be seen, not just overflow, depending on the value being incremented by kref_get(); on another run: [ 7273.182666] refcount_t: saturated; leaking memory. ... [ 7273.185789] refcount_t: underflow; use-after-free. Kprobes: ------- Using kprobe events to monitor sk -> sk_security -> label -> count (kref): Original v5.7 (one reference leak every iteration) ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6 Patched v5.7 (zero reference leak per iteration) ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 Commits: ------- [1] commit 507cad355fc9 ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets") [2] commit 4c63f83c2c2e ("crypto: af_alg - properly label AF_ALG socket") [3] commit 2acce6aa9f65 ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning) [4] commit 56974a6fcfef ("apparmor: add base infastructure for socket mediation") Fixes: 56974a6fcfef ("apparmor: add base infastructure for socket mediation") Reported-by: Brian Moyles <bmoyles@netflix.com> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by: John Johansen <john.johansen@canonical.com>
2020-06-06Merge tag 'integrity-v5.8' of ↵Linus Torvalds12-87/+390
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "The main changes are extending the TPM 2.0 PCR banks with bank specific file hashes, calculating the "boot_aggregate" based on other TPM PCR banks, using the default IMA hash algorithm, instead of SHA1, as the basis for the cache hash table key, and preventing the mprotect syscall to circumvent an IMA mmap appraise policy rule. - In preparation for extending TPM 2.0 PCR banks with bank specific digests, commit 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") modified tpm_pcr_extend(). The original SHA1 file digests were padded/truncated, before being extended into the other TPM PCR banks. This pull request calculates and extends the TPM PCR banks with bank specific file hashes completing the above change. - The "boot_aggregate", the first IMA measurement list record, is the "trusted boot" link between the pre-boot environment and the running OS. With TPM 2.0, the "boot_aggregate" record is not limited to being based on the SHA1 TPM PCR bank, but can be calculated based on any enabled bank, assuming the hash algorithm is also enabled in the kernel. Other changes include the following and five other bug fixes/code clean up: - supporting both a SHA1 and a larger "boot_aggregate" digest in a custom template format containing both the the SHA1 ('d') and larger digests ('d-ng') fields. - Initial hash table key fix, but additional changes would be good" * tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Directly free *entry in ima_alloc_init_template() if digests is NULL ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init() ima: Directly assign the ima_default_policy pointer to ima_rules ima: verify mprotect change is consistent with mmap policy evm: Fix possible memory leak in evm_calc_hmac_or_hash() ima: Set again build_ima_appraise variable ima: Remove redundant policy rule set in add_rules() ima: Fix ima digest hash table key calculation ima: Use ima_hash_algo for collision detection in the measurement list ima: Calculate and extend PCR with digests in ima_template_entry ima: Allocate and initialize tfm for each PCR bank ima: Switch to dynamically allocated buffer for template digests ima: Store template digest directly in ima_template_entry ima: Evaluate error in init_ima() ima: Switch to ima_hash_algo for boot aggregate
2020-06-05ima: Directly free *entry in ima_alloc_init_template() if digests is NULLRoberto Sassu1-2/+3
To support multiple template digests, the static array entry->digest has been replaced with a dynamically allocated array in commit aa724fe18a8a ("ima: Switch to dynamically allocated buffer for template digests"). The array is allocated in ima_alloc_init_template() and if the returned pointer is NULL, ima_free_template_entry() is called. However, (*entry)->template_desc is not yet initialized while it is used by ima_free_template_entry(). This patch fixes the issue by directly freeing *entry without calling ima_free_template_entry(). Fixes: aa724fe18a8a ("ima: Switch to dynamically allocated buffer for template digests") Reported-by: syzbot+223310b454ba6b75974e@syzkaller.appspotmail.com Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-06-04Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-22/+5
Merge yet more updates from Andrew Morton: - More MM work. 100ish more to go. Mike Rapoport's "mm: remove __ARCH_HAS_5LEVEL_HACK" series should fix the current ppc issue - Various other little subsystems * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits) lib/ubsan.c: fix gcc-10 warnings tools/testing/selftests/vm: remove duplicate headers selftests: vm: pkeys: fix multilib builds for x86 selftests: vm: pkeys: use the correct page size on powerpc selftests/vm/pkeys: override access right definitions on powerpc selftests/vm/pkeys: test correct behaviour of pkey-0 selftests/vm/pkeys: introduce a sub-page allocator selftests/vm/pkeys: detect write violation on a mapped access-denied-key page selftests/vm/pkeys: associate key on a mapped page and detect write violation selftests/vm/pkeys: associate key on a mapped page and detect access violation selftests/vm/pkeys: improve checks to determine pkey support selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust() selftests/vm/pkeys: fix number of reserved powerpc pkeys selftests/vm/pkeys: introduce powerpc support selftests/vm/pkeys: introduce generic pkey abstractions selftests: vm: pkeys: use the correct huge page size selftests/vm/pkeys: fix alloc_random_pkey() to make it really random selftests/vm/pkeys: fix assertion in pkey_disable_set/clear() selftests/vm/pkeys: fix pkey_disable_clear() selftests: vm: pkeys: add helpers for pkey bits ...
2020-06-04mm: add kvfree_sensitive() for freeing sensitive data objectsWaiman Long2-22/+5
For kvmalloc'ed data object that contains sensitive information like cryptographic keys, we need to make sure that the buffer is always cleared before freeing it. Using memset() alone for buffer clearing may not provide certainty as the compiler may compile it away. To be sure, the special memzero_explicit() has to be used. This patch introduces a new kvfree_sensitive() for freeing those sensitive data objects allocated by kvmalloc(). The relevant places where kvfree_sensitive() can be used are modified to use it. Fixes: 4f0882491a14 ("KEYS: Avoid false positive ENOMEM error on key read") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Uladzislau Rezki <urezki@gmail.com> Link: http://lkml.kernel.org/r/20200407200318.11711-1-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04Merge branch 'exec-linus' of ↵Linus Torvalds8-40/+32
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull execve updates from Eric Biederman: "Last cycle for the Nth time I ran into bugs and quality of implementation issues related to exec that could not be easily be fixed because of the way exec is implemented. So I have been digging into exec and cleanup up what I can. I don't think I have exec sorted out enough to fix the issues I started with but I have made some headway this cycle with 4 sets of changes. - promised cleanups after introducing exec_update_mutex - trivial cleanups for exec - control flow simplifications - remove the recomputation of bprm->cred The net result is code that is a bit easier to understand and work with and a decrease in the number of lines of code (if you don't count the added tests)" * 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (24 commits) exec: Compute file based creds only once exec: Add a per bprm->file version of per_clear binfmt_elf_fdpic: fix execfd build regression selftests/exec: Add binfmt_script regression test exec: Remove recursion from search_binary_handler exec: Generic execfd support exec/binfmt_script: Don't modify bprm->buf and then return -ENOEXEC exec: Move the call of prepare_binprm into search_binary_handler exec: Allow load_misc_binary to call prepare_binprm unconditionally exec: Convert security_bprm_set_creds into security_bprm_repopulate_creds exec: Factor security_bprm_creds_for_exec out of security_bprm_set_creds exec: Teach prepare_exec_creds how exec treats uids & gids exec: Set the point of no return sooner exec: Move handling of the point of no return to the top level exec: Run sync_mm_rss before taking exec_update_mutex exec: Fix spelling of search_binary_handler in a comment exec: Move the comment from above de_thread to above unshare_sighand exec: Rename flush_old_exec begin_new_exec exec: Move most of setup_new_exec into flush_old_exec exec: In setup_new_exec cache current in the local variable me ...
2020-06-04Merge branch 'proc-linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull proc updates from Eric Biederman: "This has four sets of changes: - modernize proc to support multiple private instances - ensure we see the exit of each process tid exactly - remove has_group_leader_pid - use pids not tasks in posix-cpu-timers lookup Alexey updated proc so each mount of proc uses a new superblock. This allows people to actually use mount options with proc with no fear of messing up another mount of proc. Given the kernel's internal mounts of proc for things like uml this was a real problem, and resulted in Android's hidepid mount options being ignored and introducing security issues. The rest of the changes are small cleanups and fixes that came out of my work to allow this change to proc. In essence it is swapping the pids in de_thread during exec which removes a special case the code had to handle. Then updating the code to stop handling that special case" * 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: proc_pid_ns takes super_block as an argument remove the no longer needed pid_alive() check in __task_pid_nr_ns() posix-cpu-timers: Replace __get_task_for_clock with pid_for_clock posix-cpu-timers: Replace cpu_timer_pid_type with clock_pid_type posix-cpu-timers: Extend rcu_read_lock removing task_struct references signal: Remove has_group_leader_pid exec: Remove BUG_ON(has_group_leader_pid) posix-cpu-timer: Unify the now redundant code in lookup_task posix-cpu-timer: Tidy up group_leader logic in lookup_task proc: Ensure we see the exit of each process tid exactly once rculist: Add hlists_swap_heads_rcu proc: Use PIDTYPE_TGID in next_tgid Use proc_pid_ns() to get pid_namespace from the proc superblock proc: use named enums for better readability proc: use human-readable values for hidepid docs: proc: add documentation for "hidepid=4" and "subset=pid" options and new mount behavior proc: add option to mount only a pids subset proc: instantiate only pids that we can ptrace on 'hidepid=4' mount option proc: allow to mount many instances of proc in one pid namespace proc: rename struct proc_fs_info to proc_fs_opts
2020-06-04Merge tag 'Smack-for-5.8' of git://github.com/cschaufler/smack-nextLinus Torvalds3-43/+21
Pull smack updates from Casey Schaufler: "Clean out dead code and repair an out-of-bounds warning" * tag 'Smack-for-5.8' of git://github.com/cschaufler/smack-next: Smack: Remove unused inline function smk_ad_setfield_u_fs_path_mnt Smack:- Remove redundant inode_smack cache Smack:- Remove mutex lock "smk_lock" from inode_smack Smack: slab-out-of-bounds in vsscanf smack: remove redundant structure variable from header. smack: avoid unused 'sip' variable warning
2020-06-04Merge tag 'keys-next-20200602' of ↵Linus Torvalds2-209/+52
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring updates from David Howells: - Fix a documentation warning. - Replace a zero-length array with a flexible one - Make the big_key key type use ChaCha20Poly1305 and use the crypto algorithm directly rather than going through the crypto layer. - Implement the update op for the big_key type. * tag 'keys-next-20200602' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Implement update for the big_key type security/keys: rewrite big_key crypto to use library interface KEYS: Replace zero-length array with flexible-array Documentation: security: core.rst: add missing argument
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds4-5/+5
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-06-03ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()Roberto Sassu4-5/+24
If the template field 'd' is chosen and the digest to be added to the measurement entry was not calculated with SHA1 or MD5, it is recalculated with SHA1, by using the passed file descriptor. However, this cannot be done for boot_aggregate, because there is no file descriptor. This patch adds a call to ima_calc_boot_aggregate() in ima_eventdigest_init(), so that the digest can be recalculated also for the boot_aggregate entry. Cc: stable@vger.kernel.org # 3.13.x Fixes: 3ce1217d6cd5d ("ima: define template fields library and new helpers") Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-06-03ima: Directly assign the ima_default_policy pointer to ima_rulesRoberto Sassu1-2/+1
This patch prevents the following oops: [ 10.771813] BUG: kernel NULL pointer dereference, address: 0000000000000 [...] [ 10.779790] RIP: 0010:ima_match_policy+0xf7/0xb80 [...] [ 10.798576] Call Trace: [ 10.798993] ? ima_lsm_policy_change+0x2b0/0x2b0 [ 10.799753] ? inode_init_owner+0x1a0/0x1a0 [ 10.800484] ? _raw_spin_lock+0x7a/0xd0 [ 10.801592] ima_must_appraise.part.0+0xb6/0xf0 [ 10.802313] ? ima_fix_xattr.isra.0+0xd0/0xd0 [ 10.803167] ima_must_appraise+0x4f/0x70 [ 10.804004] ima_post_path_mknod+0x2e/0x80 [ 10.804800] do_mknodat+0x396/0x3c0 It occurs when there is a failure during IMA initialization, and ima_init_policy() is not called. IMA hooks still call ima_match_policy() but ima_rules is NULL. This patch prevents the crash by directly assigning the ima_default_policy pointer to ima_rules when ima_rules is defined. This wouldn't alter the existing behavior, as ima_rules is always set at the end of ima_init_policy(). Cc: stable@vger.kernel.org # 3.7.x Fixes: 07f6a79415d7d ("ima: add appraise action keywords and default rules") Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-06-03ovl: call secutiry hook in ovl_real_ioctl()Miklos Szeredi1-0/+1
Verify LSM permissions for underlying file, since vfs_ioctl() doesn't do it. [Stephen Rothwell] export security_file_ioctl Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-06-02Merge branch 'next-general' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull lockdown update from James Morris: "An update for the security subsystem to allow unprivileged users to see the status of the lockdown feature. From Jeremy Cline" Also an added comment to describe CAP_SETFCAP. * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: capabilities: add description for CAP_SETFCAP lockdown: Allow unprivileged users to see lockdown status
2020-06-02Merge tag 'selinux-pr-20200601' of ↵Linus Torvalds19-326/+499
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux updates from Paul Moore: "The highlights: - A number of improvements to various SELinux internal data structures to help improve performance. We move the role transitions into a hash table. In the content structure we shift from hashing the content string (aka SELinux label) to the structure itself, when it is valid. This last change not only offers a speedup, but it helps us simplify the code some as well. - Add a new SELinux policy version which allows for a more space efficient way of storing the filename transitions in the binary policy. Given the default Fedora SELinux policy with the unconfined module enabled, this change drops the policy size from ~7.6MB to ~3.3MB. The kernel policy load time dropped as well. - Some fixes to the error handling code in the policy parser to properly return error codes when things go wrong" * tag 'selinux-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: netlabel: Remove unused inline function selinux: do not allocate hashtabs dynamically selinux: fix return value on error in policydb_read() selinux: simplify range_write() selinux: fix error return code in policydb_read() selinux: don't produce incorrect filename_trans_count selinux: implement new format of filename transitions selinux: move context hashing under sidtab selinux: hash context structure directly selinux: store role transitions in a hash table selinux: drop unnecessary smp_load_acquire() call selinux: fix warning Comparison to bool
2020-06-02Merge tag 'tomoyo-pr-20200601' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1Linus Torvalds1-1/+1
Pull tomoyo update from Tetsuo Handa: "One patch for suppressing coccicheck's warning" * tag 'tomoyo-pr-20200601' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: tomoyo: use true for bool variable
2020-06-02keys: Implement update for the big_key typeDavid Howells1-1/+18
Implement the ->update op for the big_key type. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
2020-06-02security/keys: rewrite big_key crypto to use library interfaceJason A. Donenfeld2-209/+35
A while back, I noticed that the crypto and crypto API usage in big_keys were entirely broken in multiple ways, so I rewrote it. Now, I'm rewriting it again, but this time using the simpler ChaCha20Poly1305 library function. This makes the file considerably more simple; the diffstat alone should justify this commit. It also should be faster, since it no longer requires a mutex around the "aead api object" (nor allocations), allowing us to encrypt multiple items in parallel. We also benefit from being able to pass any type of pointer, so we can get rid of the ridiculously complex custom page allocator that big_key really doesn't need. [DH: Change the select CRYPTO_LIB_CHACHA20POLY1305 to a depends on as select doesn't propagate and the build can end up with an =y dependending on some =m pieces. The depends on CRYPTO also had to be removed otherwise the configurator complains about a recursive dependency.] Cc: Andy Lutomirski <luto@kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: kernel-hardening@lists.openwall.com Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-01Merge branch 'uaccess.access_ok' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull uaccess/access_ok updates from Al Viro: "Removals of trivially pointless access_ok() calls. Note: the fiemap stuff was removed from the series, since they are duplicates with part of ext4 series carried in Ted's tree" * 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vmci_host: get rid of pointless access_ok() hfi1: get rid of pointless access_ok() usb: get rid of pointless access_ok() calls lpfc_debugfs: get rid of pointless access_ok() efi_test: get rid of pointless access_ok() drm_read(): get rid of pointless access_ok() via-pmu: don't bother with access_ok() drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok() omapfb: get rid of pointless access_ok() calls amifb: get rid of pointless access_ok() calls drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok() drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok() cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok() nvram: drop useless access_ok() n_hdlc_tty_read(): remove pointless access_ok() tomoyo_write_control(): get rid of pointless access_ok() btrfs_ioctl_send(): don't bother with access_ok() fat_dir_ioctl(): hadn't needed that access_ok() for more than a decade... dlmfs_file_write(): get rid of pointless access_ok()
2020-06-01security: apparmor: default KUNIT_* fragments to KUNIT_ALL_TESTSAnders Roxell1-1/+2
This makes it easier to enable all KUnit fragments. Adding 'if !KUNIT_ALL_TESTS' so individual tests can not be turned off. Therefore if KUNIT_ALL_TESTS is enabled that will hide the prompt in menuconfig. Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-06-01Merge tag 'perf-core-2020-06-01' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side changes: - Add AMD Fam17h RAPL support - Introduce CAP_PERFMON to kernel and user space - Add Zhaoxin CPU support - Misc fixes and cleanups Tooling changes: - perf record: Introduce '--switch-output-event' to use arbitrary events to be setup and read from a side band thread and, when they take place a signal be sent to the main 'perf record' thread, reusing the core for '--switch-output' to take perf.data snapshots from the ring buffer used for '--overwrite', e.g.: # perf record --overwrite -e sched:* \ --switch-output-event syscalls:*connect* \ workload will take perf.data.YYYYMMDDHHMMSS snapshots up to around the connect syscalls. Add '--num-synthesize-threads' option to control degree of parallelism of the synthesize_mmap() code which is scanning /proc/PID/task/PID/maps and can be time consuming. This mimics pre-existing behaviour in 'perf top'. - perf bench: Add a multi-threaded synthesize benchmark and kallsyms parsing benchmark. - Intel PT support: Stitch LBR records from multiple samples to get deeper backtraces, there are caveats, see the csets for details. Allow using Intel PT to synthesize callchains for regular events. Add support for synthesizing branch stacks for regular events (cycles, instructions, etc) from Intel PT data. Misc changes: - Updated perf vendor events for power9 and Coresight. - Add flamegraph.py script via 'perf flamegraph' - Misc other changes, fixes and cleanups - see the Git log for details Also, since over the last couple of years perf tooling has matured and decoupled from the kernel perf changes to a large degree, going forward Arnaldo is going to send perf tooling changes via direct pull requests" * tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits) perf/x86/rapl: Add AMD Fam17h RAPL support perf/x86/rapl: Make perf_probe_msr() more robust and flexible perf/x86/rapl: Flip logic on default events visibility perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs perf/x86/rapl: Move RAPL support to common x86 code perf/core: Replace zero-length array with flexible-array perf/x86: Replace zero-length array with flexible-array perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont perf/x86/rapl: Add Ice Lake RAPL support perf flamegraph: Use /bin/bash for report and record scripts perf cs-etm: Move definition of 'traceid_list' global variable from header file libsymbols kallsyms: Move hex2u64 out of header libsymbols kallsyms: Parse using io api perf bench: Add kallsyms parsing perf: cs-etm: Update to build with latest opencsd version. perf symbol: Fix kernel symbol address display perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*() perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*() perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*() perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*() ...
2020-06-01Merge branch 'linus' of ↵Linus Torvalds1-15/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Introduce crypto_shash_tfm_digest() and use it wherever possible. - Fix use-after-free and race in crypto_spawn_alg. - Add support for parallel and batch requests to crypto_engine. Algorithms: - Update jitter RNG for SP800-90B compliance. - Always use jitter RNG as seed in drbg. Drivers: - Add Arm CryptoCell driver cctrng. - Add support for SEV-ES to the PSP driver in ccp" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits) crypto: hisilicon - fix driver compatibility issue with different versions of devices crypto: engine - do not requeue in case of fatal error crypto: cavium/nitrox - Fix a typo in a comment crypto: hisilicon/qm - change debugfs file name from qm_regs to regs crypto: hisilicon/qm - add DebugFS for xQC and xQE dump crypto: hisilicon/zip - add debugfs for Hisilicon ZIP crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC crypto: hisilicon/qm - add debugfs to the QM state machine crypto: hisilicon/qm - add debugfs for QM crypto: stm32/crc32 - protect from concurrent accesses crypto: stm32/crc32 - don't sleep in runtime pm crypto: stm32/crc32 - fix multi-instance crypto: stm32/crc32 - fix run-time self test issue. crypto: stm32/crc32 - fix ext4 chksum BUG_ON() crypto: hisilicon/zip - Use temporary sqe when doing work crypto: hisilicon - add device error report through abnormal irq crypto: hisilicon - remove codes of directly report device errors through MSI crypto: hisilicon - QM memory management optimization crypto: hisilicon - unify initial value assignment into QM ...
2020-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-4/+18
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29exec: Compute file based creds only onceEric W. Biederman2-13/+15
Move the computation of creds from prepare_binfmt into begin_new_exec so that the creds need only be computed once. This is just code reorganization no semantic changes of any kind are made. Moving the computation is safe. I have looked through the kernel and verified none of the binfmts look at bprm->cred directly, and that there are no helpers that look at bprm->cred indirectly. Which means that it is not a problem to compute the bprm->cred later in the execution flow as it is not used until it becomes current->cred. A new function bprm_creds_from_file is added to contain the work that needs to be done. bprm_creds_from_file first computes which file bprm->executable or most likely bprm->file that the bprm->creds will be computed from. The funciton bprm_fill_uid is updated to receive the file instead of accessing bprm->file. The now unnecessary work needed to reset the bprm->cred->euid, and bprm->cred->egid is removed from brpm_fill_uid. A small comment to document that bprm_fill_uid now only deals with the work to handle suid and sgid files. The default case is already heandled by prepare_exec_creds. The function security_bprm_repopulate_creds is renamed security_bprm_creds_from_file and now is explicitly passed the file from which to compute the creds. The documentation of the bprm_creds_from_file security hook is updated to explain when the hook is called and what it needs to do. The file is passed from cap_bprm_creds_from_file into get_file_caps so that the caps are computed for the appropriate file. The now unnecessary work in cap_bprm_creds_from_file to reset the ambient capabilites has been removed. A small comment to document that the work of cap_bprm_creds_from_file is to read capabilities from the files secureity attribute and derive capabilities from the fact the user had uid 0 has been added. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-29exec: Add a per bprm->file version of per_clearEric W. Biederman1-1/+1
There is a small bug in the code that recomputes parts of bprm->cred for every bprm->file. The code never recomputes the part of clear_dangerous_personality_flags it is responsible for. Which means that in practice if someone creates a sgid script the interpreter will not be able to use any of: READ_IMPLIES_EXEC ADDR_NO_RANDOMIZE ADDR_COMPAT_LAYOUT MMAP_PAGE_ZERO. This accentially clearing of personality flags probably does not matter in practice because no one has complained but it does make the code more difficult to understand. Further remaining bug compatible prevents the recomputation from being removed and replaced by simply computing bprm->cred once from the final bprm->file. Making this change removes the last behavior difference between computing bprm->creds from the final file and recomputing bprm->cred several times. Which allows this behavior change to be justified for it's own reasons, and for any but hunts looking into why the behavior changed to wind up here instead of in the code that will follow that computes bprm->cred from the final bprm->file. This small logic bug appears to have existed since the code started clearing dangerous personality bits. History Tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: 1bb0fa189c6a ("[PATCH] NX: clean up legacy binary support") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-29tomoyo_write_control(): get rid of pointless access_ok()Al Viro1-2/+0
address is passed only to get_user() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-28Merge tag 'v5.7-rc7' into perf/core, to pick up fixesIngo Molnar11-66/+105
Signed-off-by: Ingo Molnar <mingo@kernel.org>