| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull integrity updates from James Morris:
"This adds support for EVM signatures based on larger digests, contains
a new audit record AUDIT_INTEGRITY_POLICY_RULE to differentiate the
IMA policy rules from the IMA-audit messages, addresses two deadlocks
due to either loading or searching for crypto algorithms, and cleans
up the audit messages"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
EVM: fix return value check in evm_write_xattrs()
integrity: prevent deadlock during digsig verification.
evm: Allow non-SHA1 digital signatures
evm: Don't deadlock if a crypto algorithm is unavailable
integrity: silence warning when CONFIG_SECURITYFS is not enabled
ima: Differentiate auditing policy rules from "audit" actions
ima: Do not audit if CONFIG_INTEGRITY_AUDIT is not set
ima: Use audit_log_format() rather than audit_log_string()
ima: Call audit_log_string() rather than logging it untrusted
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull TPM updates from James Morris:
- Migrate away from PM runtime as explicit cmdReady/goIdle transactions
for every command is a spec requirement. PM runtime adds only a layer
of complexity on our case.
- tpm_tis drivers can now specify the hwrng quality.
- TPM 2.0 code uses now tpm_buf for constructing messages. Jarkko
thinks Tomas Winkler has done the same for TPM 1.2, and will start
digging those changes from the patchwork in the near future.
- Bug fixes and clean ups
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: Get rid of ima_used_chip and use ima_tpm_chip != NULL instead
ima: Use tpm_default_chip() and call TPM functions with a tpm_chip
tpm: replace TPM_TRANSMIT_RAW with TPM_TRANSMIT_NESTED
tpm: Convert tpm_find_get_ops() to use tpm_default_chip()
tpm: Implement tpm_default_chip() to find a TPM chip
tpm: rename tpm_chip_find_get() to tpm_find_get_ops()
tpm: Allow tpm_tis drivers to set hwrng quality.
tpm: Return the actual size when receiving an unsupported command
tpm: separate cmd_ready/go_idle from runtime_pm
tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
tpm_tis_spi: Pass the SPI IRQ down to the driver
tpm: migrate tpm2_get_random() to use struct tpm_buf
tpm: migrate tpm2_get_tpm_pt() to use struct tpm_buf
tpm: migrate tpm2_probe() to use struct tpm_buf
tpm: migrate tpm2_shutdown() to use struct tpm_buf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull smack updates from James Morris:
"Minor fixes from Piotr Sawicki"
* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Smack: Inform peer that IPv6 traffic has been blocked
Smack: Check UDP-Lite and DCCP protocols during IPv6 handling
Smack: Fix handling of IPv4 traffic received by PF_INET6 sockets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix dcache flushing crash in skcipher.
- Add hash finup self-tests.
- Reschedule during speed tests.
Algorithms:
- Remove insecure vmac and replace it with vmac64.
- Add public key verification for DH/ECDH.
Drivers:
- Decrease priority of sha-mb on x86.
- Improve NEON latency/throughput on ARM64.
- Add md5/sha384/sha512/des/3des to inside-secure.
- Support eip197d in inside-secure.
- Only register algorithms supported by the host in virtio.
- Add cts and remove incompatible cts1 from ccree.
- Add hisilicon SEC security accelerator driver.
- Replace msm hwrng driver with qcom pseudo rng driver.
Misc:
- Centralize CRC polynomials"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (121 commits)
crypto: arm64/ghash-ce - implement 4-way aggregation
crypto: arm64/ghash-ce - replace NEON yield check with block limit
crypto: hisilicon - sec_send_request() can be static
lib/mpi: remove redundant variable esign
crypto: arm64/aes-ce-gcm - don't reload key schedule if avoidable
crypto: arm64/aes-ce-gcm - implement 2-way aggregation
crypto: arm64/aes-ce-gcm - operate on two input blocks at a time
crypto: dh - make crypto_dh_encode_key() make robust
crypto: dh - fix calculating encoded key size
crypto: ccp - Check for NULL PSP pointer at module unload
crypto: arm/chacha20 - always use vrev for 16-bit rotates
crypto: ccree - allow bigger than sector XTS op
crypto: ccree - zero all of request ctx before use
crypto: ccree - remove cipher ivgen left overs
crypto: ccree - drop useless type flag during reg
crypto: ablkcipher - fix crash flushing dcache in error path
crypto: blkcipher - fix crash flushing dcache in error path
crypto: skcipher - fix crash flushing dcache in error path
crypto: skcipher - remove unnecessary setting of walk->nbytes
crypto: scatterwalk - remove scatterwalk_samebuf()
...
|
|
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- verify depmod is installed before modules_install
- support build salt in case build ids must be unique between builds
- allow users to specify additional host compiler flags via HOST*FLAGS,
and rename internal variables to KBUILD_HOST*FLAGS
- update buildtar script to drop vax support, add arm64 support
- update builddeb script for better debarch support
- document the pit-fall of if_changed usage
- fix parallel build of UML with O= option
- make 'samples' target depend on headers_install to fix build errors
- remove deprecated host-progs variable
- add a new coccinelle script for refcount_t vs atomic_t check
- improve double-test coccinelle script
- misc cleanups and fixes
* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
coccicheck: return proper error code on fail
Coccinelle: doubletest: reduce side effect false positives
kbuild: remove deprecated host-progs variable
kbuild: make samples really depend on headers_install
um: clean up archheaders recipe
kbuild: add %asm-generic to no-dot-config-targets
um: fix parallel building with O= option
scripts: Add Python 3 support to tracing/draw_functrace.py
builddeb: Add automatic support for sh{3,4}{,eb} architectures
builddeb: Add automatic support for riscv* architectures
builddeb: Add automatic support for m68k architecture
builddeb: Add automatic support for or1k architecture
builddeb: Add automatic support for sparc64 architecture
builddeb: Add automatic support for mips{,64}r6{,el} architectures
builddeb: Add automatic support for mips64el architecture
builddeb: Add automatic support for ppc64 and powerpcspe architectures
builddeb: Introduce functions to simplify kconfig tests in set_debarch
builddeb: Drop check for 32-bit s390
builddeb: Change architecture detection fallback to use dpkg-architecture
builddeb: Skip architecture detection when KBUILD_DEBARCH is set
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
"There are 16 patches in here but really only one that is of any
significance. That one patch is by nixiaoming and fixes a few places
where we were not properly cleaning up dentry and inode objects in the
selinuxfs error handling code. The rest are either printk->pr_*
conversions, constification tweaks, and a minor tweak to MAINTAINERS.
Everything passes the selinux-testsuite and looks to merge cleanly
against your master branch"
* tag 'selinux-pr-20180814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: cleanup dentry and inodes on error in selinuxfs
selinux: constify write_op[]
selinux: Cleanup printk logging in netnode
selinux: Cleanup printk logging in avc
selinux: Cleanup printk logging in netif
selinux: Cleanup printk logging in netport
selinux: Cleanup printk logging in sidtab
selinux: Cleanup printk logging in netlink
selinux: Cleanup printk logging in selinuxfs
selinux: Cleanup printk logging in services
selinux: Cleanup printk logging in avtab
selinux: Cleanup printk logging in hooks
selinux: Cleanup printk logging in policydb
selinux: Cleanup printk logging in ebitmap
selinux: Cleanup printk logging in conditional
MAINTAINERS: update the LSM and SELinux subsystems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
- kstrdup() return value fix from Eric Biggers
- Add new security_load_data hook to differentiate security checking of
kernel-loaded binaries in the case of there being no associated file
descriptor, from Mimi Zohar.
- Add ability to IMA to specify a policy at build-time, rather than
just via command line params or by loading a custom policy, from
Mimi.
- Allow IMA and LSMs to prevent sysfs firmware load fallback (e.g. if
using signed firmware), from Mimi.
- Allow IMA to deny loading of kexec kernel images, as they cannot be
measured by IMA, from Mimi.
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: check for kstrdup() failure in lsm_append()
security: export security_kernel_load_data function
ima: based on policy warn about loading firmware (pre-allocated buffer)
module: replace the existing LSM hook in init_module
ima: add build time policy
ima: based on policy require signed firmware (sysfs fallback)
firmware: add call to LSM hook before firmware sysfs fallback
ima: based on policy require signed kexec kernel images
kexec: add call to LSM hook in original kexec_load syscall
security: define new LSM hook named security_kernel_load_data
MAINTAINERS: remove the outdated "LINUX SECURITY MODULE (LSM) FRAMEWORK" entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardened usercopy updates from Kees Cook:
"This cleans up a minor Kconfig issue and adds a kernel boot option for
disabling hardened usercopy for distro users that may have corner-case
performance issues (e.g. high bandwidth small-packet UDP traffic).
Summary:
- drop unneeded Kconfig "select BUG" (Kamal Mostafa)
- add "hardened_usercopy=off" rare performance needs (Chris von
Recklinghausen)"
* tag 'hardened-usercopy-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usercopy: Allow boot cmdline disabling of hardening
usercopy: Do not select BUG with HARDENED_USERCOPY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs open-related updates from Al Viro:
- "do we need fput() or put_filp()" rules are gone - it's always fput()
now. We keep track of that state where it belongs - in ->f_mode.
- int *opened mess killed - in finish_open(), in ->atomic_open()
instances and in fs/namei.c code around do_last()/lookup_open()/atomic_open().
- alloc_file() wrappers with saner calling conventions are introduced
(alloc_file_clone() and alloc_file_pseudo()); callers converted, with
much simplification.
- while we are at it, saner calling conventions for path_init() and
link_path_walk(), simplifying things inside fs/namei.c (both on
open-related paths and elsewhere).
* 'work.open3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
few more cleanups of link_path_walk() callers
allow link_path_walk() to take ERR_PTR()
make path_init() unconditionally paired with terminate_walk()
document alloc_file() changes
make alloc_file() static
do_shmat(): grab shp->shm_file earlier, switch to alloc_file_clone()
new helper: alloc_file_clone()
create_pipe_files(): switch the first allocation to alloc_file_pseudo()
anon_inode_getfile(): switch to alloc_file_pseudo()
hugetlb_file_setup(): switch to alloc_file_pseudo()
ocxlflash_getfile(): switch to alloc_file_pseudo()
cxl_getfile(): switch to alloc_file_pseudo()
... and switch shmem_file_setup() to alloc_file_pseudo()
__shmem_file_setup(): reorder allocations
new wrapper: alloc_file_pseudo()
kill FILE_{CREATED,OPENED}
switch atomic_open() and lookup_open() to returning 0 in all success cases
document ->atomic_open() changes
->atomic_open(): return 0 in all success cases
get rid of 'opened' in path_openat() and the helpers downstream
...
|
|
If the resource requested by d_alloc_name is not added to the linked
list through d_add, then dput needs to be called to release the
subsequent abnormal branch to avoid resource leakage.
Add missing dput to selinuxfs.c
Signed-off-by: nixiaoming <nixiaoming@huawei.com>
[PM: tweak the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Merge mainline to pick up c7513c2a2714 ("crypto/arm64: aes-ce-gcm -
add missing kernel_neon_begin/end pair").
|
|
into next-smack
From Casey Schaufler.
|
|
Get rid of ima_used_chip and use ima_tpm_chip variable instead for
determining whether to use the TPM chip.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Rather than accessing the TPM functions by passing a NULL pointer for
the tpm_chip, which causes a lookup for a suitable chip every time, get a
hold of a tpm_chip and access the TPM functions using it.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Allow user to create, destroy, get and dump chain objects. Do that by
extending rtnl commands by the chain-specific ones. User will now be
able to explicitly create or destroy chains (so far this was done only
automatically according the filter/act needs and refcounting). Also, the
user will receive notification about any chain creation or destuction.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In this patch we're sending an ICMPv6 message to a peer to
immediately inform it that making a connection is not possible.
In case of TCP connections, without this change, the peer
will be waiting until a connection timeout is exceeded.
Signed-off-by: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
The smack_socket_sock_rcv_skb() function is checking smack labels
only for UDP and TCP frames carried in IPv6 packets. From now on,
it is able also to handle UDP-Lite and DCCP protocols.
Signed-off-by: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
A socket which has sk_family set to PF_INET6 is able to receive not
only IPv6 but also IPv4 traffic (IPv4-mapped IPv6 addresses).
Prior to this patch, the smk_skb_to_addr_ipv6() could have been
called for socket buffers containing IPv4 packets, in result such
traffic was allowed.
Signed-off-by: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
In case of error, the function audit_log_start() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Fixes: fa516b66a1bf ("EVM: Allow runtime modification of the set of verified xattrs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Allow PTI to be compiled on x86_32.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Pavel Machek <pavel@ucw.cz>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1531906876-13451-38-git-send-email-joro@8bytes.org
|
|
This patch aimed to prevent deadlock during digsig verification.The point
of issue - user space utility modprobe and/or it's dependencies (ld-*.so,
libz.so.*, libc-*.so and /lib/modules/ files) that could be used for
kernel modules load during digsig verification and could be signed by
digsig in the same time.
First at all, look at crypto_alloc_tfm() work algorithm:
crypto_alloc_tfm() will first attempt to locate an already loaded
algorithm. If that fails and the kernel supports dynamically loadable
modules, it will then attempt to load a module of the same name or alias.
If that fails it will send a query to any loaded crypto manager to
construct an algorithm on the fly.
We have situation, when public_key_verify_signature() in case of RSA
algorithm use alg_name to store internal information in order to construct
an algorithm on the fly, but crypto_larval_lookup() will try to use
alg_name in order to load kernel module with same name.
1) we can't do anything with crypto module work, since it designed to work
exactly in this way;
2) we can't globally filter module requests for modprobe, since it
designed to work with any requests.
In this patch, I propose add an exception for "crypto-pkcs1pad(rsa,*)"
module requests only in case of enabled integrity asymmetric keys support.
Since we don't have any real "crypto-pkcs1pad(rsa,*)" kernel modules for
sure, we are safe to fail such module request from crypto_larval_lookup().
In this way we prevent modprobe execution during digsig verification and
avoid possible deadlock if modprobe and/or it's dependencies also signed
with digsig.
Requested "crypto-pkcs1pad(rsa,*)" kernel module name formed by:
1) "pkcs1pad(rsa,%s)" in public_key_verify_signature();
2) "crypto-%s" / "crypto-%s-all" in crypto_larval_lookup().
"crypto-pkcs1pad(rsa," part of request is a constant and unique and could
be used as filter.
Signed-off-by: Mikhail Kurinnoi <viewizard@viewizard.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
include/linux/integrity.h | 13 +++++++++++++
security/integrity/digsig_asymmetric.c | 23 +++++++++++++++++++++++
security/security.c | 7 ++++++-
3 files changed, 42 insertions(+), 1 deletion(-)
|
|
SHA1 is reasonable in HMAC constructs, but it's desirable to be able to
use stronger hashes in digital signatures. Modify the EVM crypto code so
the hash type is imported from the digital signature and passed down to
the hash calculation code, and return the digest size to higher layers
for validation.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
When EVM attempts to appraise a file signed with a crypto algorithm the
kernel doesn't have support for, it will cause the kernel to trigger a
module load. If the EVM policy includes appraisal of kernel modules this
will in turn call back into EVM - since EVM is holding a lock until the
crypto initialisation is complete, this triggers a deadlock. Add a
CRYPTO_NOLOAD flag and skip module loading if it's set, and add that flag
in the EVM case in order to fail gracefully with an error message
instead of deadlocking.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
When CONFIG_SECURITYFS is not enabled, securityfs_create_dir returns
-ENODEV which throws the following error:
"Unable to create integrity sysfs dir: -19"
However, if the feature is disabled, it can't be warning and hence
we need to silence the error. This patch checks for the error -ENODEV
which is returned when CONFIG_SECURITYFS is disabled to stop the error
being thrown.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
The AUDIT_INTEGRITY_RULE is used for auditing IMA policy rules and
the IMA "audit" policy action. This patch defines
AUDIT_INTEGRITY_POLICY_RULE to reflect the IMA policy rules.
Since we defined a new message type we can now also pass the
audit_context and get an associated SYSCALL record. This now produces
the following records when parsing IMA policy's rules:
type=UNKNOWN[1807] msg=audit(1527888965.738:320): action=audit \
func=MMAP_CHECK mask=MAY_EXEC res=1
type=UNKNOWN[1807] msg=audit(1527888965.738:320): action=audit \
func=FILE_CHECK mask=MAY_READ res=1
type=SYSCALL msg=audit(1527888965.738:320): arch=c000003e syscall=1 \
success=yes exit=17 a0=1 a1=55bcfcca9030 a2=11 a3=7fcc1b55fb38 \
items=0 ppid=1567 pid=1601 auid=0 uid=0 gid=0 euid=0 suid=0 \
fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty2 ses=2 comm="echo" \
exe="/usr/bin/echo" \
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
If Integrity is not auditing, IMA shouldn't audit, either.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
Remove the usage of audit_log_string() and replace it with
audit_log_format().
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
The parameters passed to this logging function are all provided by
a privileged user and therefore we can call audit_log_string()
rather than audit_log_untrustedstring().
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
lsm_append() should return -ENOMEM if memory allocation failed.
Fixes: d69dece5f5b6 ("LSM: Add /sys/kernel/security/lsm")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
The firmware_loader can be built as a loadable module, which now
fails when CONFIG_SECURITY is enabled, because a call to the
security_kernel_load_data() function got added, and this is
not exported to modules:
ERROR: "security_kernel_load_data" [drivers/base/firmware_loader/firmware_class.ko] undefined!
Add an EXPORT_SYMBOL_GPL() to make it available here.
Fixes: 6e852651f28e ("firmware: add call to LSM hook before firmware sysfs fallback")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
write_op[] is never modified, so make it 'const'.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic") moved bin2c
to the scripts/basic/ directory, incorrectly stating "Kexec wants to
use bin2c and it wants to use it really early in the build process.
See arch/x86/purgatory/ code in later patches."
Commit bdab125c9301 ("Revert "kexec/purgatory: Add clean-up for
purgatory directory"") and commit d6605b6bbee8 ("x86/build: Remove
unnecessary preparation for purgatory") removed the redundant
purgatory build magic entirely.
That means that the move of bin2c was unnecessary in the first place.
fixdep is the only host program that deserves to sit in the
scripts/basic/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Some systems are memory constrained but they need to load very large
firmwares. The firmware subsystem allows drivers to request this
firmware be loaded from the filesystem, but this requires that the
entire firmware be loaded into kernel memory first before it's provided
to the driver. This can lead to a situation where we map the firmware
twice, once to load the firmware into kernel memory and once to copy the
firmware into the final resting place.
To resolve this problem, commit a098ecd2fa7d ("firmware: support loading
into a pre-allocated buffer") introduced request_firmware_into_buf() API
that allows drivers to request firmware be loaded directly into a
pre-allocated buffer.
Do devices using pre-allocated memory run the risk of the firmware being
accessible to the device prior to the completion of IMA's signature
verification any more than when using two buffers? (Refer to mailing list
discussion[1]).
Only on systems with an IOMMU can the access be prevented. As long as
the signature verification completes prior to the DMA map is performed,
the device can not access the buffer. This implies that the same buffer
can not be re-used. Can we ensure the buffer has not been DMA mapped
before using the pre-allocated buffer?
[1] https://lkml.org/lkml/2018/7/10/56
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Both the init_module and finit_module syscalls call either directly
or indirectly the security_kernel_read_file LSM hook. This patch
replaces the direct call in init_module with a call to the new
security_kernel_load_data hook and makes the corresponding changes
in SELinux, LoadPin, and IMA.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
IMA by default does not measure, appraise or audit files, but can be
enabled at runtime by specifying a builtin policy on the boot command line
or by loading a custom policy.
This patch defines a build time policy, which verifies kernel modules,
firmware, kexec image, and/or the IMA policy signatures. This build time
policy is automatically enabled at runtime and persists after loading a
custom policy.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
With an IMA policy requiring signed firmware, this patch prevents
the sysfs fallback method of loading firmware.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Matthew Garrett <mjg59@google.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
The original kexec_load syscall can not verify file signatures, nor can
the kexec image be measured. Based on policy, deny the kexec_load
syscall.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Differentiate between the kernel reading a file specified by userspace
from the kernel loading a buffer containing data provided by userspace.
This patch defines a new LSM hook named security_kernel_load_data().
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
just check ->f_mode in ima_appraise_measurement()
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Some crypto API users allocating a tfm with crypto_alloc_$FOO() are also
specifying the type flags for $FOO, e.g. crypto_alloc_shash() with
CRYPTO_ALG_TYPE_SHASH. But, that's redundant since the crypto API will
override any specified type flag/mask with the correct ones.
So, remove the unneeded flags.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is no need to "select BUG" when CONFIG_HARDENED_USERCOPY is enabled.
The kernel thread will always die, regardless of the CONFIG_BUG.
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
[kees: tweak commit log]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"One fairly straightforward patch to fix a longstanding issue where a
process could stall while accessing files in selinuxfs and block
everyone else due to a held mutex.
The patch passes all our tests and looks to apply cleanly to your
current tree"
* tag 'selinux-pr-20180629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: move user accesses in selinuxfs out of locked regions
|
|
If a user is accessing a file in selinuxfs with a pointer to a userspace
buffer that is backed by e.g. a userfaultfd, the userspace access can
stall indefinitely, which can block fsi->mutex if it is held.
For sel_read_policy(), remove the locking, since this method doesn't seem
to access anything that requires locking.
For sel_read_bool(), move the user access below the locked region.
For sel_write_bool() and sel_commit_bools_write(), move the user access
up above the locked region.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: removed an unused variable in sel_read_policy()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Commit 383203eff718 ("dh key: get rid of stack allocated array") changed
kdf_ctr() to assume that the length of key material to derive is a
multiple of the digest size. The length was supposed to be rounded up
accordingly. However, the round_up() macro was used which only gives
the correct result on power-of-2 arguments, whereas not all hash
algorithms have power-of-2 digest sizes. In some cases this resulted in
a write past the end of the 'outbuf' buffer.
Fix it by switching to roundup(), which works for non-power-of-2 inputs.
Reported-by: syzbot+486f97f892efeb2075a3@syzkaller.appspotmail.com
Reported-by: syzbot+29d17b7898b41ee120a5@syzkaller.appspotmail.com
Reported-by: syzbot+8a608baf8751184ec727@syzkaller.appspotmail.com
Reported-by: syzbot+d04e58bd384f1fe0b112@syzkaller.appspotmail.com
Fixes: 383203eff718 ("dh key: get rid of stack allocated array")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Smack: Mark inode instant in smack_task_to_inode
/proc clean-up in commit 1bbc55131e59bd099fdc568d3aa0b42634dbd188
resulted in smack_task_to_inode() being called before smack_d_instantiate.
This resulted in the smk_inode value being ignored, even while present
for files in /proc/self. Marking the inode as instant here fixes that.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
