summaryrefslogtreecommitdiffstats
path: root/security
AgeCommit message (Collapse)AuthorFilesLines
2016-07-08apparmor: fix oops, validate buffer size in apparmor_setprocattr()Vegard Nossum1-17/+19
When proc_pid_attr_write() was changed to use memdup_user apparmor's (interface violating) assumption that the setprocattr buffer was always a single page was violated. The size test is not strictly speaking needed as proc_pid_attr_write() will reject anything larger, but for the sake of robustness we can keep it in. SMACK and SELinux look safe to me, but somebody else should probably have a look just in case. Based on original patch from Vegard Nossum <vegard.nossum@oracle.com> modified for the case that apparmor provides null termination. Fixes: bb646cdb12e75d82258c2f2e7746d5952d3e321a Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: John Johansen <john.johansen@canonical.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Eric Paris <eparis@parisplace.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: stable@kernel.org Signed-off-by: John Johansen <john.johansen@canonical.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-06-16KEYS: potential uninitialized variableDan Carpenter1-1/+1
If __key_link_begin() failed then "edit" would be uninitialized. I've added a check to fix that. This allows a random user to crash the kernel, though it's quite difficult to achieve. There are three ways it can be done as the user would have to cause an error to occur in __key_link(): (1) Cause the kernel to run out of memory. In practice, this is difficult to achieve without ENOMEM cropping up elsewhere and aborting the attempt. (2) Revoke the destination keyring between the keyring ID being looked up and it being tested for revocation. In practice, this is difficult to time correctly because the KEYCTL_REJECT function can only be used from the request-key upcall process. Further, users can only make use of what's in /sbin/request-key.conf, though this does including a rejection debugging test - which means that the destination keyring has to be the caller's session keyring in practice. (3) Have just enough key quota available to create a key, a new session keyring for the upcall and a link in the session keyring, but not then sufficient quota to create a link in the nominated destination keyring so that it fails with EDQUOT. The bug can be triggered using option (3) above using something like the following: echo 80 >/proc/sys/kernel/keys/root_maxbytes keyctl request2 user debug:fred negate @t The above sets the quota to something much lower (80) to make the bug easier to trigger, but this is dependent on the system. Note also that the name of the keyring created contains a random number that may be between 1 and 10 characters in size, so may throw the test off by changing the amount of quota used. Assuming the failure occurs, something like the following will be seen: kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h ------------[ cut here ]------------ kernel BUG at ../mm/slab.c:2821! ... RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25 RSP: 0018:ffff8804014a7de8 EFLAGS: 00010092 RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000 RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300 RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202 R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001 ... Call Trace: kfree+0xde/0x1bc assoc_array_cancel_edit+0x1f/0x36 __key_link_end+0x55/0x63 key_reject_and_link+0x124/0x155 keyctl_reject_key+0xb6/0xe0 keyctl_negate_key+0x10/0x12 SyS_keyctl+0x9f/0xe7 do_syscall_64+0x63/0x13a entry_SYSCALL64_slow_path+0x25/0x25 Fixes: f70e2e06196a ('KEYS: Do preallocation for __key_link()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-03KEYS: Add placeholder for KDF usage with DHStephan Mueller4-6/+13
The values computed during Diffie-Hellman key exchange are often used in combination with key derivation functions to create cryptographic keys. Add a placeholder for a later implementation to configure a key derivation function that will transform the Diffie-Hellman result returned by the KEYCTL_DH_COMPUTE command. [This patch was stripped down from a patch produced by Mat Martineau that had a bug in the compat code - so for the moment Stephan's patch simply requires that the placeholder argument must be NULL] Original-signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-05-27Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Followups to the parallel lookup work: - update docs - restore killability of the places that used to take ->i_mutex killably now that we have down_write_killable() merged - Additionally, it turns out that I missed a prerequisite for security_d_instantiate() stuff - ->getxattr() wasn't the only thing that could be called before dentry is attached to inode; with smack we needed the same treatment applied to ->setxattr() as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch ->setxattr() to passing dentry and inode separately switch xattr_handler->set() to passing dentry and inode separately restore killability of old mutex_lock_killable(&inode->i_mutex) users add down_write_killable_nested() update D/f/directory-locking
2016-05-27switch ->setxattr() to passing dentry and inode separatelyAl Viro1-1/+1
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before we'd hashed the new dentry and attached it to inode, we need ->setxattr() instances getting the inode as an explicit argument rather than obtaining it from dentry. Similar change for ->getxattr() had been done in commit ce23e64. Unlike ->getxattr() (which is used by both selinux and smack instances of ->d_instantiate()) ->setxattr() is used only by smack one and unfortunately it got missed back then. Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-26Yama: fix double-spinlock and user access in atomic contextJann Horn1-6/+63
Commit 8a56038c2aef ("Yama: consolidate error reporting") causes lockups when someone hits a Yama denial. Call chain: process_vm_readv -> process_vm_rw -> process_vm_rw_core -> mm_access -> ptrace_may_access task_lock(...) is taken __ptrace_may_access -> security_ptrace_access_check -> yama_ptrace_access_check -> report_access -> kstrdup_quotable_cmdline -> get_cmdline -> access_process_vm -> get_task_mm task_lock(...) is taken again task_lock(p) just calls spin_lock(&p->alloc_lock), so at this point, spin_lock() is called on a lock that is already held by the current process. Also: Since the alloc_lock is a spinlock, sleeping inside security_ptrace_access_check hooks is probably not allowed at all? So it's not even possible to print the cmdline from in there because that might involve paging in userspace memory. It would be tempting to rewrite ptrace_may_access() to drop the alloc_lock before calling the LSM, but even then, ptrace_may_access() itself might be called from various contexts in which you're not allowed to sleep; for example, as far as I understand, to be able to hold a reference to another task, usually an RCU read lock will be taken (see e.g. kcmp() and get_robust_list()), so that also prohibits sleeping. (And using e.g. FUSE, a user can cause pagefault handling to take arbitrary amounts of time - see https://bugs.chromium.org/p/project-zero/issues/detail?id=808.) Therefore, AFAIK, in order to print the name of a process below security_ptrace_access_check(), you'd have to either grab a reference to the mm_struct and defer the access violation reporting or just use the "comm" value that's stored in kernelspace and accessible without big complications. (Or you could try to use some kind of atomic remote VM access that fails if the memory isn't paged in, similar to copy_from_user_inatomic(), and if necessary fall back to comm, but that'd be kind of ugly because the comm/cmdline choice would look pretty random to the user.) Fix it by deferring reporting of the access violation until current exits kernelspace the next time. v2: Don't oops on PTRACE_TRACEME, call report_access under task_lock(current). Also fix nonsensical comment. And don't use GPF_ATOMIC for memory allocation with no locks held. This patch is tested both for ptrace attach and ptrace traceme. Fixes: 8a56038c2aef ("Yama: consolidate error reporting") Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-05-20security/integrity/ima/ima_policy.c: use %pU to output UUID in printable formatAndy Shevchenko1-12/+2
Instead of open coded variant re-use extension that vsprintf.c provides us for ages. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19Merge branch 'next' of ↵Linus Torvalds34-185/+909
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Highlights: - A new LSM, "LoadPin", from Kees Cook is added, which allows forcing of modules and firmware to be loaded from a specific device (this is from ChromeOS, where the device as a whole is verified cryptographically via dm-verity). This is disabled by default but can be configured to be enabled by default (don't do this if you don't know what you're doing). - Keys: allow authentication data to be stored in an asymmetric key. Lots of general fixes and updates. - SELinux: add restrictions for loading of kernel modules via finit_module(). Distinguish non-init user namespace capability checks. Apply execstack check on thread stacks" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (48 commits) LSM: LoadPin: provide enablement CONFIG Yama: use atomic allocations when reporting seccomp: Fix comment typo ima: add support for creating files using the mknodat syscall ima: fix ima_inode_post_setattr vfs: forbid write access when reading a file into memory fs: fix over-zealous use of "const" selinux: apply execstack check on thread stacks selinux: distinguish non-init user namespace capability checks LSM: LoadPin for kernel file loading restrictions fs: define a string representation of the kernel_read_file_id enumeration Yama: consolidate error reporting string_helpers: add kstrdup_quotable_file string_helpers: add kstrdup_quotable_cmdline string_helpers: add kstrdup_quotable selinux: check ss_initialized before revalidating an inode label selinux: delay inode label lookup as long as possible selinux: don't revalidate an inode's label when explicitly setting it selinux: Change bool variable name to index. KEYS: Add KEYCTL_DH_COMPUTE command ...
2016-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+3
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
2016-05-17Merge branch 'work.const-path' of ↵Linus Torvalds13-106/+83
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 'struct path' constification update from Al Viro: "'struct path' is passed by reference to a bunch of Linux security methods; in theory, there's nothing to stop them from modifying the damn thing and LSM community being what it is, sooner or later some enterprising soul is going to decide that it's a good idea. Let's remove the temptation and constify all of those..." * 'work.const-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: constify ima_d_path() constify security_sb_pivotroot() constify security_path_chroot() constify security_path_{link,rename} apparmor: remove useless checks for NULL ->mnt constify security_path_{mkdir,mknod,symlink} constify security_path_{unlink,rmdir} apparmor: constify common_perm_...() apparmor: constify aa_path_link() apparmor: new helper - common_path_perm() constify chmod_common/security_path_chmod constify security_sb_mount() constify chown_common/security_path_chown tomoyo: constify assorted struct path * apparmor_path_truncate(): path->mnt is never NULL constify vfs_truncate() constify security_path_truncate() [apparmor] constify struct path * in a bunch of helpers
2016-05-17Merge branch 'for-linus' of ↵Linus Torvalds4-14/+15
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull parallel filesystem directory handling update from Al Viro. This is the main parallel directory work by Al that makes the vfs layer able to do lookup and readdir in parallel within a single directory. That's a big change, since this used to be all protected by the directory inode mutex. The inode mutex is replaced by an rwsem, and serialization of lookups of a single name is done by a "in-progress" dentry marker. The series begins with xattr cleanups, and then ends with switching filesystems over to actually doing the readdir in parallel (switching to the "iterate_shared()" that only takes the read lock). A more detailed explanation of the process from Al Viro: "The xattr work starts with some acl fixes, then switches ->getxattr to passing inode and dentry separately. This is the point where the things start to get tricky - that got merged into the very beginning of the -rc3-based #work.lookups, to allow untangling the security_d_instantiate() mess. The xattr work itself proceeds to switch a lot of filesystems to generic_...xattr(); no complications there. After that initial xattr work, the series then does the following: - untangle security_d_instantiate() - convert a bunch of open-coded lookup_one_len_unlocked() to calls of that thing; one such place (in overlayfs) actually yields a trivial conflict with overlayfs fixes later in the cycle - overlayfs ended up switching to a variant of lookup_one_len_unlocked() sans the permission checks. I would've dropped that commit (it gets overridden on merge from #ovl-fixes in #for-next; proper resolution is to use the variant in mainline fs/overlayfs/super.c), but I didn't want to rebase the damn thing - it was fairly late in the cycle... - some filesystems had managed to depend on lookup/lookup exclusion for *fs-internal* data structures in a way that would break if we relaxed the VFS exclusion. Fixing hadn't been hard, fortunately. - core of that series - parallel lookup machinery, replacing ->i_mutex with rwsem, making lookup_slow() take it only shared. At that point lookups happen in parallel; lookups on the same name wait for the in-progress one to be done with that dentry. Surprisingly little code, at that - almost all of it is in fs/dcache.c, with fs/namei.c changes limited to lookup_slow() - making it use the new primitive and actually switching to locking shared. - parallel readdir stuff - first of all, we provide the exclusion on per-struct file basis, same as we do for read() vs lseek() for regular files. That takes care of most of the needed exclusion in readdir/readdir; however, these guys are trickier than lookups, so I went for switching them one-by-one. To do that, a new method '->iterate_shared()' is added and filesystems are switched to it as they are either confirmed to be OK with shared lock on directory or fixed to be OK with that. I hope to kill the original method come next cycle (almost all in-tree filesystems are switched already), but it's still not quite finished. - several filesystems get switched to parallel readdir. The interesting part here is dealing with dcache preseeding by readdir; that needs minor adjustment to be safe with directory locked only shared. Most of the filesystems doing that got switched to in those commits. Important exception: NFS. Turns out that NFS folks, with their, er, insistence on VFS getting the fuck out of the way of the Smart Filesystem Code That Knows How And What To Lock(tm) have grown the locking of their own. They had their own homegrown rwsem, with lookup/readdir/atomic_open being *writers* (sillyunlink is the reader there). Of course, with VFS getting the fuck out of the way, as requested, the actual smarts of the smart filesystem code etc. had become exposed... - do_last/lookup_open/atomic_open cleanups. As the result, open() without O_CREAT locks the directory only shared. Including the ->atomic_open() case. Backmerge from #for-linus in the middle of that - atomic_open() fix got brought in. - then comes NFS switch to saner (VFS-based ;-) locking, killing the homegrown "lookup and readdir are writers" kinda-sorta rwsem. All exclusion for sillyunlink/lookup is done by the parallel lookups mechanism. Exclusion between sillyunlink and rmdir is a real rwsem now - rmdir being the writer. Result: NFS lookups/readdirs/O_CREAT-less opens happen in parallel now. - the rest of the series consists of switching a lot of filesystems to parallel readdir; in a lot of cases ->llseek() gets simplified as well. One backmerge in there (again, #for-linus - rockridge fix)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (74 commits) ext4: switch to ->iterate_shared() hfs: switch to ->iterate_shared() hfsplus: switch to ->iterate_shared() hostfs: switch to ->iterate_shared() hpfs: switch to ->iterate_shared() hpfs: handle allocation failures in hpfs_add_pos() gfs2: switch to ->iterate_shared() f2fs: switch to ->iterate_shared() afs: switch to ->iterate_shared() befs: switch to ->iterate_shared() befs: constify stuff a bit isofs: switch to ->iterate_shared() get_acorn_filename(): deobfuscate a bit btrfs: switch to ->iterate_shared() logfs: no need to lock directory in lseek switch ecryptfs to ->iterate_shared 9p: switch to ->iterate_shared() fat: switch to ->iterate_shared() romfs, squashfs: switch to ->iterate_shared() more trivial ->iterate_shared conversions ...
2016-05-17Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather small set of patches from the timer departement: - Some more y2038 work - Yet another new clocksource driver - The usual set of small fixes, cleanups and enhancements" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/tegra: Remove unused suspend/resume code clockevents/driversi/mps2: add MPS2 Timer driver dt-bindings: document the MPS2 timer bindings clocksource/drivers/mtk_timer: Add __init attribute clockevents/drivers/dw_apb_timer: Implement ->set_state_oneshot_stopped() time: Introduce do_sys_settimeofday64() security: Introduce security_settime64() clocksource: Add missing include of of.h.
2016-05-17LSM: LoadPin: provide enablement CONFIGKees Cook2-6/+15
Instead of being enabled by default when SECURITY_LOADPIN is selected, provide an additional (default off) config to determine the boot time behavior. As before, the "loadpin.enabled=0/1" kernel parameter remains available. Suggested-by: James Morris <jmorris@namei.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-05-17Merge branch 'ovl-fixes' into for-linusAl Viro1-2/+2
Backmerge to resolve a conflict in ovl_lookup_real(); "ovl_lookup_real(): use lookup_one_len_unlocked()" instead, but it was too late in the cycle to rebase.
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06Merge branch 'stable-4.7' of git://git.infradead.org/users/pcmoore/selinux ↵James Morris5-60/+127
into next
2016-05-06Merge tag 'keys-next-20160505' of ↵James Morris19-112/+516
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next
2016-05-04Yama: use atomic allocations when reportingSasha Levin1-2/+2
Access reporting often happens from atomic contexes. Avoid lockups when allocating memory for command lines. Fixes: 8a56038c2ae ("Yama: consolidate error reporting") Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-05-04Merge branch 'keys-trust' into keys-nextDavid Howells10-62/+128
Here's a set of patches that changes how certificates/keys are determined to be trusted. That's currently a two-step process: (1) Up until recently, when an X.509 certificate was parsed - no matter the source - it was judged against the keys in .system_keyring, assuming those keys to be trusted if they have KEY_FLAG_TRUSTED set upon them. This has just been changed such that any key in the .ima_mok keyring, if configured, may also be used to judge the trustworthiness of a new certificate, whether or not the .ima_mok keyring is meant to be consulted for whatever process is being undertaken. If a certificate is determined to be trustworthy, KEY_FLAG_TRUSTED will be set upon a key it is loaded into (if it is loaded into one), no matter what the key is going to be loaded for. (2) If an X.509 certificate is loaded into a key, then that key - if KEY_FLAG_TRUSTED gets set upon it - can be linked into any keyring with KEY_FLAG_TRUSTED_ONLY set upon it. This was meant to be the system keyring only, but has been extended to various IMA keyrings. A user can at will link any key marked KEY_FLAG_TRUSTED into any keyring marked KEY_FLAG_TRUSTED_ONLY if the relevant permissions masks permit it. These patches change that: (1) Trust becomes a matter of consulting the ring of trusted keys supplied when the trust is evaluated only. (2) Every keyring can be supplied with its own manager function to restrict what may be added to that keyring. This is called whenever a key is to be linked into the keyring to guard against a key being created in one keyring and then linked across. This function is supplied with the keyring and the key type and payload[*] of the key being linked in for use in its evaluation. It is permitted to use other data also, such as the contents of other keyrings such as the system keyrings. [*] The type and payload are supplied instead of a key because as an optimisation this function may be called whilst creating a key and so may reject the proposed key between preparse and allocation. (3) A default manager function is provided that permits keys to be restricted to only asymmetric keys that are vouched for by the contents of the system keyring. A second manager function is provided that just rejects with EPERM. (4) A key allocation flag, KEY_ALLOC_BYPASS_RESTRICTION, is made available so that the kernel can initialise keyrings with keys that form the root of the trust relationship. (5) KEY_FLAG_TRUSTED and KEY_FLAG_TRUSTED_ONLY are removed, along with key_preparsed_payload::trusted. This change also makes it possible in future for userspace to create a private set of trusted keys and then to have it sealed by setting a manager function where the private set is wholly independent of the kernel's trust relationships. Further changes in the set involve extracting certain IMA special keyrings and making them generally global: (*) .system_keyring is renamed to .builtin_trusted_keys and remains read only. It carries only keys built in to the kernel. It may be where UEFI keys should be loaded - though that could better be the new secondary keyring (see below) or a separate UEFI keyring. (*) An optional secondary system keyring (called .secondary_trusted_keys) is added to replace the IMA MOK keyring. (*) Keys can be added to the secondary keyring by root if the keys can be vouched for by either ring of system keys. (*) Module signing and kexec only use .builtin_trusted_keys and do not use the new secondary keyring. (*) Config option SYSTEM_TRUSTED_KEYS now depends on ASYMMETRIC_KEY_TYPE as that's the only type currently permitted on the system keyrings. (*) A new config option, IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY, is provided to allow keys to be added to IMA keyrings, subject to the restriction that such keys are validly signed by a key already in the system keyrings. If this option is enabled, but secondary keyrings aren't, additions to the IMA keyrings will be restricted to signatures verifiable by keys in the builtin system keyring only. Signed-off-by: David Howells <dhowells@redhat.com>
2016-05-04ima: fix the string representation of the LSM/IMA hook enumeration orderingMimi Zohar1-2/+2
This patch fixes the string representation of the LSM/IMA hook enumeration ordering used for displaying the IMA policy. Fixes: d9ddf077bb85 ("ima: support for kexec image and initramfs") Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Tested-by: Eric Richter <erichte@linux.vnet.ibm.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-05-01ima: add support for creating files using the mknodat syscallMimi Zohar2-1/+29
Commit 3034a14 "ima: pass 'opened' flag to identify newly created files" stopped identifying empty files as new files. However new empty files can be created using the mknodat syscall. On systems with IMA-appraisal enabled, these empty files are not labeled with security.ima extended attributes properly, preventing them from subsequently being opened in order to write the file data contents. This patch defines a new hook named ima_post_path_mknod() to mark these empty files, created using mknodat, as new in order to allow the file data contents to be written. In addition, files with security.ima xattrs containing a file signature are considered "immutable" and can not be modified. The file contents need to be written, before signing the file. This patch relaxes this requirement for new files, allowing the file signature to be written before the file contents. Changelog: - defer identifying files with signatures stored as security.ima (based on Dmitry Rozhkov's comments) - removing tests (eg. dentry, dentry->d_inode, inode->i_size == 0) (based on Al's review) Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Al Viro <<viro@zeniv.linux.org.uk> Tested-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
2016-05-01ima: fix ima_inode_post_setattrMimi Zohar2-1/+2
Changing file metadata (eg. uid, guid) could result in having to re-appraise a file's integrity, but does not change the "new file" status nor the security.ima xattr. The IMA_PERMIT_DIRECTIO and IMA_DIGSIG_REQUIRED flags are policy rule specific. This patch only resets these flags, not the IMA_NEW_FILE or IMA_DIGSIG flags. With this patch, changing the file timestamp will not remove the file signature on new files. Reported-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Tested-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
2016-04-26selinux: apply execstack check on thread stacksStephen Smalley1-2/+3
The execstack check was only being applied on the main process stack. Thread stacks allocated via mmap were only subject to the execmem permission check. Augment the check to apply to the current thread stack as well. Note that this does NOT prevent making a different thread's stack executable. Suggested-by: Nick Kralevich <nnk@google.com> Acked-by: Nick Kralevich <nnk@google.com> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-26selinux: distinguish non-init user namespace capability checksStephen Smalley2-17/+25
Distinguish capability checks against a target associated with the init user namespace versus capability checks against a target associated with a non-init user namespace by defining and using separate security classes for the latter. This is needed to support e.g. Chrome usage of user namespaces for the Chrome sandbox without needing to allow Chrome to also exercise capabilities on targets in the init user namespace. Suggested-by: Dan Walsh <dwalsh@redhat.com> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-22security: Introduce security_settime64()Baolin Wang2-2/+2
security_settime() uses a timespec, which is not year 2038 safe on 32bit systems. Thus this patch introduces the security_settime64() function with timespec64 type. We also convert the cap_settime() helper function to use the 64bit types. This patch then moves security_settime() to the header file as an inline helper function so that existing users can be iteratively converted. None of the existing hooks is using the timespec argument and therefor the patch is not making any functional changes. Cc: Serge Hallyn <serge.hallyn@canonical.com>, Cc: James Morris <james.l.morris@oracle.com>, Cc: "Serge E. Hallyn" <serge@hallyn.com>, Cc: Paul Moore <pmoore@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Kees Cook <keescook@chromium.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> [jstultz: Reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-04-21LSM: LoadPin for kernel file loading restrictionsKees Cook6-0/+205
This LSM enforces that kernel-loaded files (modules, firmware, etc) must all come from the same filesystem, with the expectation that such a filesystem is backed by a read-only device such as dm-verity or CDROM. This allows systems that have a verified and/or unchangeable filesystem to enforce module and firmware loading restrictions without needing to sign the files individually. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-04-21Yama: consolidate error reportingKees Cook1-10/+21
Use a common error reporting function for Yama violation reports, and give more detail into the process command lines. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-04-20rtnetlink: add new RTM_GETSTATS message to dump link statsRoopa Prabhu1-1/+3
This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-19selinux: check ss_initialized before revalidating an inode labelPaul Moore1-1/+1
There is no point in trying to revalidate an inode's security label if the security server is not yet initialized. Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-19selinux: delay inode label lookup as long as possiblePaul Moore1-8/+13
Since looking up an inode's label can result in revalidation, delay the lookup as long as possible to limit the performance impact. Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-19selinux: don't revalidate an inode's label when explicitly setting itPaul Moore1-2/+11
There is no point in attempting to revalidate an inode's security label when we are in the process of setting it. Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-14selinux: Change bool variable name to index.Prarit Bhargava2-4/+4
security_get_bool_value(int bool) argument "bool" conflicts with in-kernel macros such as BUILD_BUG(). This patch changes this to index which isn't a type. Cc: Paul Moore <paul@paul-moore.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Eric Paris <eparis@parisplace.org> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: selinux@tycho.nsa.gov Cc: Eric Paris <eparis@redhat.com> Cc: Paul Moore <pmoore@redhat.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: David Howells <dhowells@redhat.com> [PM: wrapped description for checkpatch.pl, use "selinux:..." as subj] Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-12KEYS: Add KEYCTL_DH_COMPUTE commandMat Martineau6-0/+193
This adds userspace access to Diffie-Hellman computations through a new keyctl() syscall command to calculate shared secrets or public keys using input parameters stored in the keyring. Input key ids are provided in a struct due to the current 5-arg limit for the keyctl syscall. Only user keys are supported in order to avoid exposing the content of logon or encrypted keys. The output is written to the provided buffer, based on the assumption that the values are only needed in userspace. Future support for other types of key derivation would involve a new command, like KEYCTL_ECDH_COMPUTE. Once Diffie-Hellman support is included in the crypto API, this code can be converted to use the crypto API to take advantage of possible hardware acceleration and reduce redundant code. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12Security: Keys: Big keys stored encryptedKirill Marinushkin2-18/+184
Solved TODO task: big keys saved to shmem file are now stored encrypted. The encryption key is randomly generated and saved to payload[big_key_data]. Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12KEYS: user_update should use copy of payload made during preparsingDavid Howells1-31/+11
The payload preparsing routine for user keys makes a copy of the payload provided by the caller and stashes it in the key_preparsed_payload struct for ->instantiate() or ->update() to use. However, ->update() takes another copy of this to attach to the keyring. ->update() should be using this directly and clearing the pointer in the preparse data. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12security: integrity: Remove select to deleted option PUBLIC_KEY_ALGO_RSAAndreas Ziegler1-1/+0
Commit d43de6c780a8 ("akcipher: Move the RSA DER encoding check to the crypto layer") removed the Kconfig option PUBLIC_KEY_ALGO_RSA, but forgot to remove a 'select' to this option in the definition of INTEGRITY_ASYMMETRIC_KEYS. Let's remove the select, as it's ineffective now. Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11IMA: Use the the system trusted keyrings instead of .ima_mokDavid Howells4-53/+32
Add a config option (IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY) that, when enabled, allows keys to be added to the IMA keyrings by userspace - with the restriction that each must be signed by a key in the system trusted keyrings. EPERM will be returned if this option is disabled, ENOKEY will be returned if no authoritative key can be found and EKEYREJECTED will be returned if the signature doesn't match. Other errors such as ENOPKG may also be returned. If this new option is enabled, the builtin system keyring is searched, as is the secondary system keyring if that is also enabled. Intermediate keys between the builtin system keyring and the key being added can be added to the secondary keyring (which replaces .ima_mok) to form a trust chain - provided they are also validly signed by a key in one of the trusted keyrings. The .ima_mok keyring is then removed and the IMA blacklist keyring gets its own config option (IMA_BLACKLIST_KEYRING). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-04-11KEYS: Remove KEY_FLAG_TRUSTED and KEY_ALLOC_TRUSTEDDavid Howells3-39/+4
Remove KEY_FLAG_TRUSTED and KEY_ALLOC_TRUSTED as they're no longer meaningful. Also we can drop the trusted flag from the preparse structure. Given this, we no longer need to pass the key flags through to restrict_link(). Further, we can now get rid of keyring_restrict_trusted_only() also. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11KEYS: Move the point of trust determination to __key_link()David Howells2-4/+35
Move the point at which a key is determined to be trustworthy to __key_link() so that we use the contents of the keyring being linked in to to determine whether the key being linked in is trusted or not. What is 'trusted' then becomes a matter of what's in the keyring. Currently, the test is done when the key is parsed, but given that at that point we can only sensibly refer to the contents of the system trusted keyring, we can only use that as the basis for working out the trustworthiness of a new key. With this change, a trusted keyring is a set of keys that once the trusted-only flag is set cannot be added to except by verification through one of the contained keys. Further, adding a key into a trusted keyring, whilst it might grant trustworthiness in the context of that keyring, does not automatically grant trustworthiness in the context of a second keyring to which it could be secondarily linked. To accomplish this, the authentication data associated with the key source must now be retained. For an X.509 cert, this means the contents of the AuthorityKeyIdentifier and the signature data. If system keyrings are disabled then restrict_link_by_builtin_trusted() resolves to restrict_link_reject(). The integrity digital signature code still works correctly with this as it was previously using KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there is no system keyring against which trust can be determined. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11KEYS: Add a facility to restrict new links into a keyringDavid Howells8-33/+124
Add a facility whereby proposed new links to be added to a keyring can be vetted, permitting them to be rejected if necessary. This can be used to block public keys from which the signature cannot be verified or for which the signature verification fails. It could also be used to provide blacklisting. This affects operations like add_key(), KEYCTL_LINK and KEYCTL_INSTANTIATE. To this end: (1) A function pointer is added to the key struct that, if set, points to the vetting function. This is called as: int (*restrict_link)(struct key *keyring, const struct key_type *key_type, unsigned long key_flags, const union key_payload *key_payload), where 'keyring' will be the keyring being added to, key_type and key_payload will describe the key being added and key_flags[*] can be AND'ed with KEY_FLAG_TRUSTED. [*] This parameter will be removed in a later patch when KEY_FLAG_TRUSTED is removed. The function should return 0 to allow the link to take place or an error (typically -ENOKEY, -ENOPKG or -EKEYREJECTED) to reject the link. The pointer should not be set directly, but rather should be set through keyring_alloc(). Note that if called during add_key(), preparse is called before this method, but a key isn't actually allocated until after this function is called. (2) KEY_ALLOC_BYPASS_RESTRICTION is added. This can be passed to key_create_or_update() or key_instantiate_and_link() to bypass the restriction check. (3) KEY_FLAG_TRUSTED_ONLY is removed. The entire contents of a keyring with this restriction emplaced can be considered 'trustworthy' by virtue of being in the keyring when that keyring is consulted. (4) key_alloc() and keyring_alloc() take an extra argument that will be used to set restrict_link in the new key. This ensures that the pointer is set before the key is published, thus preventing a window of unrestrictedness. Normally this argument will be NULL. (5) As a temporary affair, keyring_restrict_trusted_only() is added. It should be passed to keyring_alloc() as the extra argument instead of setting KEY_FLAG_TRUSTED_ONLY on a keyring. This will be replaced in a later patch with functions that look in the appropriate places for authoritative keys. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-04-11->getxattr(): pass dentry and inode as separate argumentsAl Viro4-10/+11
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-11security: drop the unused hook skb_owned_byPaolo Abeni1-1/+0
The skb_owned_by hook was added with the commit ca10b9e9a8ca ("selinux: add a skb_owned_by() hook") and later removed when said commit was reverted. Later on, when switching to list of hooks, a field named 'skb_owned_by' was included into the security_hook_head struct, but without any users nor caller. This commit removes the said left-over field. Fixes: b1d9e6b0646d ("LSM: Switch to lists of hooks") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Paul Moore <pmoore@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-04-10don't bother with ->d_inode->i_sb - it's always equal to ->d_sbAl Viro3-4/+4
... and neither can ever be NULL Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-05selinux: restrict kernel module loadingJeff Vander Stoep2-1/+48
Utilize existing kernel_read_file hook on kernel module load. Add module_load permission to the system class. Enforces restrictions on kernel module origin when calling the finit_module syscall. The hook checks that source type has permission module_load for the target type. Example for finit_module: allow foo bar_file:system module_load; Similarly restrictions are enforced on kernel module loading when calling the init_module syscall. The hook checks that source type has permission module_load with itself as the target object because the kernel module is sourced from the calling process. Example for init_module: allow foo foo:system module_load; Signed-off-by: Jeff Vander Stoep <jeffv@google.com> [PM: fixed return value of selinux_kernel_read_file()] Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-05selinux: consolidate the ptrace parent lookup codePaul Moore1-21/+17
We lookup the tracing parent in two places, using effectively the same code, let's consolidate it. Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-05selinux: simply inode label states to INVALID and INITIALIZEDPaul Moore2-4/+3
There really is no need for LABEL_MISSING as we really only care if the inode's label is INVALID or INITIALIZED. Also adjust the revalidate code to reload the label whenever the label is not INITIALIZED so we are less sensitive to label state in the future. Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-05selinux: don't revalidate inodes in selinux_socket_getpeersec_dgram()Paul Moore1-3/+5
We don't have to worry about socket inodes being invalidated so use inode_security_novalidate() to fetch the inode's security blob. Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-03-28constify ima_d_path()Al Viro2-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28constify security_sb_pivotroot()Al Viro2-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28constify security_path_chroot()Al Viro2-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>