summaryrefslogtreecommitdiffstats
path: root/security/selinux
AgeCommit message (Collapse)AuthorFilesLines
2017-03-03Merge branch 'WIP.sched-core-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched.h split-up from Ingo Molnar: "The point of these changes is to significantly reduce the <linux/sched.h> header footprint, to speed up the kernel build and to have a cleaner header structure. After these changes the new <linux/sched.h>'s typical preprocessed size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K lines), which is around 40% faster to build on typical configs. Not much changed from the last version (-v2) posted three weeks ago: I eliminated quirks, backmerged fixes plus I rebased it to an upstream SHA1 from yesterday that includes most changes queued up in -next plus all sched.h changes that were pending from Andrew. I've re-tested the series both on x86 and on cross-arch defconfigs, and did a bisectability test at a number of random points. I tried to test as many build configurations as possible, but some build breakage is probably still left - but it should be mostly limited to architectures that have no cross-compiler binaries available on kernel.org, and non-default configurations" * 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits) sched/headers: Clean up <linux/sched.h> sched/headers: Remove #ifdefs from <linux/sched.h> sched/headers: Remove the <linux/topology.h> include from <linux/sched.h> sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h> sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h> sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h> sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h> sched/headers: Remove <linux/sched.h> from <linux/sched/init.h> sched/core: Remove unused prefetch_stack() sched/headers: Remove <linux/rculist.h> from <linux/sched.h> sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h> sched/headers: Remove <linux/signal.h> from <linux/sched.h> sched/headers: Remove <linux/rwsem.h> from <linux/sched.h> sched/headers: Remove the runqueue_is_locked() prototype sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h> sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h> sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h> sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h> ...
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-1/+1
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02selinux: wrap cgroup seclabel support with its own policy capabilityStephen Smalley4-4/+12
commit 1ea0ce40690dff38935538e8dab7b12683ded0d3 ("selinux: allow changing labels for cgroupfs") broke the Android init program, which looks up security contexts whenever creating directories and attempts to assign them via setfscreatecon(). When creating subdirectories in cgroup mounts, this would previously be ignored since cgroup did not support userspace setting of security contexts. However, after the commit, SELinux would attempt to honor the requested context on cgroup directories and fail due to permission denial. Avoid breaking existing userspace/policy by wrapping this change with a conditional on a new cgroup_seclabel policy capability. This preserves existing behavior until/unless a new policy explicitly enables this capability. Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-02-27lib/vsprintf.c: remove %Z supportAlexey Dobriyan2-2/+2
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmfDave Jiang1-3/+2
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace updates from Eric Biederman: "There is a lot here. A lot of these changes result in subtle user visible differences in kernel behavior. I don't expect anything will care but I will revert/fix things immediately if any regressions show up. From Seth Forshee there is a continuation of the work to make the vfs ready for unpriviled mounts. We had thought the previous changes prevented the creation of files outside of s_user_ns of a filesystem, but it turns we missed the O_CREAT path. Ooops. Pavel Tikhomirov and Oleg Nesterov worked together to fix a long standing bug in the implemenation of PR_SET_CHILD_SUBREAPER where only children that are forked after the prctl are considered and not children forked before the prctl. The only known user of this prctl systemd forks all children after the prctl. So no userspace regressions will occur. Holding earlier forked children to the same rules as later forked children creates a semantic that is sane enough to allow checkpoing of processes that use this feature. There is a long delayed change by Nikolay Borisov to limit inotify instances inside a user namespace. Michael Kerrisk extends the API for files used to maniuplate namespaces with two new trivial ioctls to allow discovery of the hierachy and properties of namespaces. Konstantin Khlebnikov with the help of Al Viro adds code that when a network namespace exits purges it's sysctl entries from the dcache. As in some circumstances this could use a lot of memory. Vivek Goyal fixed a bug with stacked filesystems where the permissions on the wrong inode were being checked. I continue previous work on ptracing across exec. Allowing a file to be setuid across exec while being ptraced if the tracer has enough credentials in the user namespace, and if the process has CAP_SETUID in it's own namespace. Proc files for setuid or otherwise undumpable executables are now owned by the root in the user namespace of their mm. Allowing debugging of setuid applications in containers to work better. A bug I introduced with permission checking and automount is now fixed. The big change is to mark the mounts that the kernel initiates as a result of an automount. This allows the permission checks in sget to be safely suppressed for this kind of mount. As the permission check happened when the original filesystem was mounted. Finally a special case in the mount namespace is removed preventing unbounded chains in the mount hash table, and making the semantics simpler which benefits CRIU. The vfs fix along with related work in ima and evm I believe makes us ready to finish developing and merge fully unprivileged mounts of the fuse filesystem. The cleanups of the mount namespace makes discussing how to fix the worst case complexity of umount. The stacked filesystem fixes pave the way for adding multiple mappings for the filesystem uids so that efficient and safer containers can be implemented" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc/sysctl: Don't grab i_lock under sysctl_lock. vfs: Use upper filesystem inode in bprm_fill_uid() proc/sysctl: prune stale dentries during unregistering mnt: Tuck mounts under others instead of creating shadow/side mounts. prctl: propagate has_child_subreaper flag to every descendant introduce the walk_process_tree() helper nsfs: Add an ioctl() to return owner UID of a userns fs: Better permission checking for submounts exit: fix the setns() && PR_SET_CHILD_SUBREAPER interaction vfs: open() with O_CREAT should not create inodes with unknown ids nsfs: Add an ioctl() to return the namespace type proc: Better ownership of files for non-dumpable tasks in user namespaces exec: Remove LSM_UNSAFE_PTRACE_CAP exec: Test the ptracer's saved cred to see if the tracee can gain caps exec: Don't reset euid and egid when the tracee has CAP_SETUID inotify: Convert to using per-namespace limits
2017-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-3/+8
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ...
2017-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2017-02-10Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/selinux ↵James Morris6-233/+322
into next
2017-02-08selinux: fix off-by-one in setprocattrStephen Smalley1-1/+1
SELinux tries to support setting/clearing of /proc/pid/attr attributes from the shell by ignoring terminating newlines and treating an attribute value that begins with a NUL or newline as an attempt to clear the attribute. However, the test for clearing attributes has always been wrong; it has an off-by-one error, and this could further lead to reading past the end of the allocated buffer since commit bb646cdb12e75d82258c2f2e7746d5952d3e321a ("proc_pid_attr_write(): switch to memdup_user()"). Fix the off-by-one error. Even with this fix, setting and clearing /proc/pid/attr attributes from the shell is not straightforward since the interface does not support multiple write() calls (so shells that write the value and newline separately will set and then immediately clear the attribute, requiring use of echo -n to set the attribute), whereas trying to use echo -n "" to clear the attribute causes the shell to skip the write() call altogether since POSIX says that a zero-length write causes no side effects. Thus, one must use echo -n to set and echo without -n to clear, as in the following example: $ echo -n unconfined_u:object_r:user_home_t:s0 > /proc/$$/attr/fscreate $ cat /proc/$$/attr/fscreate unconfined_u:object_r:user_home_t:s0 $ echo "" > /proc/$$/attr/fscreate $ cat /proc/$$/attr/fscreate Note the use of /proc/$$ rather than /proc/self, as otherwise the cat command will read its own attribute value, not that of the shell. There are no users of this facility to my knowledge; possibly we should just get rid of it. UPDATE: Upon further investigation it appears that a local process with the process:setfscreate permission can cause a kernel panic as a result of this bug. This patch fixes CVE-2017-2618. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: added the update about CVE-2017-2618 to the commit description] Cc: stable@vger.kernel.org # 3.5: d6ea83ec6864e Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-02-08Merge branch 'stable-4.10' of git://git.infradead.org/users/pcmoore/selinux ↵James Morris1-1/+1
into next
2017-02-07selinux: allow changing labels for cgroupfsAntonio Murdaca1-0/+2
This patch allows changing labels for cgroup mounts. Previously, running chcon on cgroupfs would throw an "Operation not supported". This patch specifically whitelist cgroupfs. The patch could also allow containers to write only to the systemd cgroup for instance, while the other cgroups are kept with cgroup_t label. Signed-off-by: Antonio Murdaca <runcom@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-02-07selinux: fix off-by-one in setprocattrStephen Smalley1-1/+1
SELinux tries to support setting/clearing of /proc/pid/attr attributes from the shell by ignoring terminating newlines and treating an attribute value that begins with a NUL or newline as an attempt to clear the attribute. However, the test for clearing attributes has always been wrong; it has an off-by-one error, and this could further lead to reading past the end of the allocated buffer since commit bb646cdb12e75d82258c2f2e7746d5952d3e321a ("proc_pid_attr_write(): switch to memdup_user()"). Fix the off-by-one error. Even with this fix, setting and clearing /proc/pid/attr attributes from the shell is not straightforward since the interface does not support multiple write() calls (so shells that write the value and newline separately will set and then immediately clear the attribute, requiring use of echo -n to set the attribute), whereas trying to use echo -n "" to clear the attribute causes the shell to skip the write() call altogether since POSIX says that a zero-length write causes no side effects. Thus, one must use echo -n to set and echo without -n to clear, as in the following example: $ echo -n unconfined_u:object_r:user_home_t:s0 > /proc/$$/attr/fscreate $ cat /proc/$$/attr/fscreate unconfined_u:object_r:user_home_t:s0 $ echo "" > /proc/$$/attr/fscreate $ cat /proc/$$/attr/fscreate Note the use of /proc/$$ rather than /proc/self, as otherwise the cat command will read its own attribute value, not that of the shell. There are no users of this facility to my knowledge; possibly we should just get rid of it. UPDATE: Upon further investigation it appears that a local process with the process:setfscreate permission can cause a kernel panic as a result of this bug. This patch fixes CVE-2017-2618. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: added the update about CVE-2017-2618 to the commit description] Cc: stable@vger.kernel.org # 3.5: d6ea83ec6864e Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-24Introduce a sysctl that modifies the value of PROT_SOCK.Krister Johansen1-1/+2
Add net.ipv4.ip_unprivileged_port_start, which is a per namespace sysctl that denotes the first unprivileged inet port in the namespace. To disable all privileged ports set this to zero. It also checks for overlap with the local port range. The privileged and local range may not overlap. The use case for this change is to allow containerized processes to bind to priviliged ports, but prevent them from ever being allowed to modify their container's network configuration. The latter is accomplished by ensuring that the network namespace is not a child of the user namespace. This modification was needed to allow the container manager to disable a namespace's priviliged port restrictions without exposing control of the network namespace to processes in the user namespace. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24exec: Remove LSM_UNSAFE_PTRACE_CAPEric W. Biederman1-2/+1
With previous changes every location that tests for LSM_UNSAFE_PTRACE_CAP also tests for LSM_UNSAFE_PTRACE making the LSM_UNSAFE_PTRACE_CAP redundant, so remove it. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-19LSM: Add /sys/kernel/security/lsmCasey Schaufler1-1/+1
I am still tired of having to find indirect ways to determine what security modules are active on a system. I have added /sys/kernel/security/lsm, which contains a comma separated list of the active security modules. No more groping around in /proc/filesystems or other clever hacks. Unchanged from previous versions except for being updated to the latest security next branch. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: John Johansen <john.johansen@canonical.com> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-01-12security,selinux,smack: kill security_task_wait hookStephen Smalley1-7/+0
As reported by yangshukui, a permission denial from security_task_wait() can lead to a soft lockup in zap_pid_ns_processes() since it only expects sys_wait4() to return 0 or -ECHILD. Further, security_task_wait() can in general lead to zombies; in the absence of some way to automatically reparent a child process upon a denial, the hook is not useful. Remove the security hook and its implementations in SELinux and Smack. Smack already removed its check from its hook. Reported-by: yangshukui <yangshukui@huawei.com> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-12selinux: drop unused socket security classesStephen Smalley2-12/+0
Several of the extended socket classes introduced by commit da69a5306ab92e07 ("selinux: support distinctions among all network address families") are never used because sockets can never be created with the associated address family. Remove these unused socket security classes. The removed classes are bridge_socket for PF_BRIDGE, ib_socket for PF_IB, and mpls_socket for PF_MPLS. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-09selinux: default to security isid in sel_make_bools() if no sid is foundGary Tierney1-3/+3
Use SECINITSID_SECURITY as the default SID for booleans which don't have a matching SID returned from security_genfs_sid(), also update the error message to a warning which matches this. This prevents the policy failing to load (and consequently the system failing to boot) when there is no default genfscon statement matched for the selinuxfs in the new policy. Signed-off-by: Gary Tierney <gary.tierney@gmx.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-09selinux: log errors when loading new policyGary Tierney1-5/+16
Adds error logging to the code paths which can fail when loading a new policy in sel_write_load(). If the policy fails to be loaded from userspace then a warning message is printed, whereas if a failure occurs after loading policy from userspace an error message will be printed with details on where policy loading failed (recreating one of /classes/, /policy_capabilities/, /booleans/ in the SELinux fs). Also, if sel_make_bools() fails to obtain an SID for an entry in /booleans/* an error will be printed indicating the path of the boolean. Signed-off-by: Gary Tierney <gary.tierney@gmx.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-09proc,security: move restriction on writing /proc/pid/attr nodes to procStephen Smalley1-12/+1
Processes can only alter their own security attributes via /proc/pid/attr nodes. This is presently enforced by each individual security module and is also imposed by the Linux credentials implementation, which only allows a task to alter its own credentials. Move the check enforcing this restriction from the individual security modules to proc_pid_attr_write() before calling the security hook, and drop the unnecessary task argument to the security hook since it can only ever be the current task. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-09selinux: clean up cred usage and simplifyStephen Smalley3-211/+166
SELinux was sometimes using the task "objective" credentials when it could/should use the "subjective" credentials. This was sometimes hidden by the fact that we were unnecessarily passing around pointers to the current task, making it appear as if the task could be something other than current, so eliminate all such passing of current. Inline various permission checking helper functions that can be reduced to a single avc_has_perm() call. Since the credentials infrastructure only allows a task to alter its own credentials, we can always assume that current must be the same as the target task in selinux_setprocattr after the check. We likely should move this check from selinux_setprocattr() to proc_pid_attr_write() and drop the task argument to the security hook altogether; it can only serve to confuse things. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-09selinux: allow context mounts on tmpfs, ramfs, devpts within user namespacesStephen Smalley1-3/+7
commit aad82892af261b9903cc11c55be3ecf5f0b0b4f8 ("selinux: Add support for unprivileged mounts from user namespaces") prohibited any use of context mount options within non-init user namespaces. However, this breaks use of context mount options for tmpfs mounts within user namespaces, which are being used by Docker/runc. There is no reason to block such usage for tmpfs, ramfs or devpts. Exempt these filesystem types from this restriction. Before: sh$ userns_child_exec -p -m -U -M '0 1000 1' -G '0 1000 1' bash sh# mount -t tmpfs -o context=system_u:object_r:user_tmp_t:s0:c13 none /tmp mount: tmpfs is write-protected, mounting read-only mount: cannot mount tmpfs read-only After: sh$ userns_child_exec -p -m -U -M '0 1000 1' -G '0 1000 1' bash sh# mount -t tmpfs -o context=system_u:object_r:user_tmp_t:s0:c13 none /tmp sh# ls -Zd /tmp unconfined_u:object_r:user_tmp_t:s0:c13 /tmp Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-09selinux: handle ICMPv6 consistently with ICMPStephen Smalley1-1/+2
commit 79c8b348f215 ("selinux: support distinctions among all network address families") mapped datagram ICMP sockets to the new icmp_socket security class, but left ICMPv6 sockets unchanged. This change fixes that oversight to handle both kinds of sockets consistently. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-09selinux: add security in-core xattr support for tracefsYongqin Liu1-0/+1
Since kernel 4.1 ftrace is supported as a new separate filesystem. It gets automatically mounted by the kernel under the old path /sys/kernel/debug/tracing. Because it lives now on a separate filesystem SELinux needs to be updated to also support setting SELinux labels on tracefs inodes. This is required for compatibility in Android when moving to Linux 4.1 or newer. Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: William Roberts <william.c.roberts@intel.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-09selinux: support distinctions among all network address familiesStephen Smalley5-2/+147
Extend SELinux to support distinctions among all network address families implemented by the kernel by defining new socket security classes and mapping to them. Otherwise, many sockets are mapped to the generic socket class and are indistinguishable in policy. This has come up previously with regard to selectively allowing access to bluetooth sockets, and more recently with regard to selectively allowing access to AF_ALG sockets. Guido Trentalancia submitted a patch that took a similar approach to add only support for distinguishing AF_ALG sockets, but this generalizes his approach to handle all address families implemented by the kernel. Socket security classes are also added for ICMP and SCTP sockets. Socket security classes were not defined for AF_* values that are reserved but unimplemented in the kernel, e.g. AF_NETBEUI, AF_SECURITY, AF_ASH, AF_ECONET, AF_SNA, AF_WANPIPE. Backward compatibility is provided by only enabling the finer-grained socket classes if a new policy capability is set in the policy; older policies will behave as before. The legacy redhat1 policy capability that was only ever used in testing within Fedora for ptrace_child is reclaimed for this purpose; as far as I can tell, this policy capability is not enabled in any supported distro policy. Add a pair of conditional compilation guards to detect when new AF_* values are added so that we can update SELinux accordingly rather than having to belatedly update it long after new address families are introduced. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-22Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull SElinux fix from James Morris: "From Paul: 'A small SELinux patch to fix some clang/llvm compiler warnings and ensure the tools under scripts work well in the face of kernel changes'" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: use the kernel headers when building scripts/selinux
2016-12-21selinux: use the kernel headers when building scripts/selinuxPaul Moore1-0/+2
Commit 3322d0d64f4e ("selinux: keep SELinux in sync with new capability definitions") added a check on the defined capabilities without explicitly including the capability header file which caused problems when building genheaders for users of clang/llvm. Resolve this by using the kernel headers when building genheaders, which is arguably the right thing to do regardless, and explicitly including the kernel's capability.h header file in classmap.h. We also update the mdp build, even though it wasn't causing an error we really should be using the headers from the kernel we are building. Reported-by: Nicolas Iooss <nicolas.iooss@m4x.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14Merge branch 'next' of ↵Linus Torvalds4-51/+84
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Generally pretty quiet for this release. Highlights: Yama: - allow ptrace access for original parent after re-parenting TPM: - add documentation - many bugfixes & cleanups - define a generic open() method for ascii & bios measurements Integrity: - Harden against malformed xattrs SELinux: - bugfixes & cleanups Smack: - Remove unnecessary smack_known_invalid label - Do not apply star label in smack_setprocattr hook - parse mnt opts after privileges check (fixes unpriv DoS vuln)" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (56 commits) Yama: allow access for the current ptrace parent tpm: adjust return value of tpm_read_log tpm: vtpm_proxy: conditionally call tpm_chip_unregister tpm: Fix handling of missing event log tpm: Check the bios_dir entry for NULL before accessing it tpm: return -ENODEV if np is not set tpm: cleanup of printk error messages tpm: replace of_find_node_by_name() with dev of_node property tpm: redefine read_log() to handle ACPI/OF at runtime tpm: fix the missing .owner in tpm_bios_measurements_ops tpm: have event log use the tpm_chip tpm: drop tpm1_chip_register(/unregister) tpm: replace dynamically allocated bios_dir with a static array tpm: replace symbolic permission with octal for securityfs files char: tpm: fix kerneldoc tpm2_unseal_trusted name typo tpm_tis: Allow tpm_tis to be bound using DT tpm, tpm_vtpm_proxy: add kdoc comments for VTPM_PROXY_IOC_NEW_DEV tpm: Only call pm_runtime_get_sync if device has a parent tpm: define a generic open() method for ascii & bios measurements Documentation: tpm: add the Physical TPM device tree binding documentation ...
2016-11-22selinux: Convert isec->lock into a spinlockAndreas Gruenbacher2-40/+66
Convert isec->lock from a mutex into a spinlock. Instead of holding the lock while sleeping in inode_doinit_with_dentry, set isec->initialized to LABEL_PENDING and release the lock. Then, when the sid has been determined, re-acquire the lock. If isec->initialized is still set to LABEL_PENDING, set isec->sid; otherwise, the sid has been set by another task (LABEL_INITIALIZED) or invalidated (LABEL_INVALID) in the meantime. This fixes a deadlock on gfs2 where * one task is in inode_doinit_with_dentry -> gfs2_getxattr, holds isec->lock, and tries to acquire the inode's glock, and * another task is in do_xmote -> inode_go_inval -> selinux_inode_invalidate_secctx, holds the inode's glock, and tries to acquire isec->lock. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> [PM: minor tweaks to keep checkpatch.pl happy] Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-11-21selinux: keep SELinux in sync with new capability definitionsStephen Smalley1-0/+4
When a new capability is defined, SELinux needs to be updated. Trigger a build error if a new capability is defined without corresponding update to security/selinux/include/classmap.h's COMMON_CAP2_PERMS. This is similar to BUILD_BUG_ON() guards in the SELinux nlmsgtab code to ensure that SELinux tracks new netlink message types as needed. Note that there is already a similar build guard in security/selinux/hooks.c to detect when more than 64 capabilities are defined, since that will require adding a third capability class to SELinux. A nicer way to do this would be to extend scripts/selinux/genheaders or a similar tool to auto-generate the necessary definitions and code for SELinux capability checking from include/uapi/linux/capability.h. AppArmor does something similar in its Makefile, although it only needs to generate a single table of names. That is left as future work. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: reformat the description to keep checkpatch.pl happy] Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-11-20selinux: normalize input to /sys/fs/selinux/enforceStephen Smalley1-0/+2
At present, one can write any signed integer value to /sys/fs/selinux/enforce and it will be stored, e.g. echo -1 > /sys/fs/selinux/enforce or echo 2 > /sys/fs/selinux/enforce. This makes no real difference to the kernel, since it only ever cares if it is zero or non-zero, but some userspace code compares it with 1 to decide if SELinux is enforcing, and this could confuse it. Only a process that is already root and is allowed the setenforce permission in SELinux policy can write to /sys/fs/selinux/enforce, so this is not considered to be a security issue, but it should be fixed. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-11-16posix-timers: Make them configurableNicolas Pitre1-4/+7
Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-14selinux: Clean up initialization of isec->sclassAndreas Gruenbacher1-6/+4
Now that isec->initialized == LABEL_INITIALIZED implies that isec->sclass is valid, skip such inodes immediately in inode_doinit_with_dentry. For the remaining inodes, initialize isec->sclass at the beginning of inode_doinit_with_dentry to simplify the code. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-11-14proc: Pass file mode to proc_pid_make_inodeAndreas Gruenbacher1-0/+1
Pass the file mode of the proc inode to be created to proc_pid_make_inode. In proc_pid_make_inode, initialize inode->i_mode before calling security_task_to_inode. This allows selinux to set isec->sclass right away without introducing "half-initialized" inode security structs. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-11-14selinux: Minor cleanupsAndreas Gruenbacher2-3/+4
Fix the comment for function __inode_security_revalidate, which returns an integer. Use the LABEL_* constants consistently for isec->initialized. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-11-14SELinux: Use GFP_KERNEL for selinux_parse_opts_str().Tetsuo Handa1-2/+3
Since selinux_parse_opts_str() is calling match_strdup() which uses GFP_KERNEL, it is safe to use GFP_KERNEL from kcalloc() which is called by selinux_parse_opts_str(). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-10-20mm: Change vm_is_stack_for_task() to vm_is_stack_for_current()Andy Lutomirski1-1/+1
Asking for a non-current task's stack can't be done without races unless the task is frozen in kernel mode. As far as I know, vm_is_stack_for_task() never had a safe non-current use case. The __unused annotation is because some KSTK_ESP implementations ignore their parameter, which IMO is further justification for this patch. Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Jann Horn <jann@thejh.net> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux API <linux-api@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tycho Andersen <tycho.andersen@canonical.com> Link: http://lkml.kernel.org/r/4c3f68f426e6c061ca98b4fc7ef85ffbb0a25b0c.1475257877.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-10Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: ">rename2() work from Miklos + current_time() from Deepa" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Replace current_fs_time() with current_time() fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps fs: Replace CURRENT_TIME with current_time() for inode timestamps fs: proc: Delete inode time initializations in proc_alloc_inode() vfs: Add current_time() api vfs: add note about i_op->rename changes to porting fs: rename "rename2" i_op to "rename" vfs: remove unused i_op->rename fs: make remaining filesystems use .rename2 libfs: support RENAME_NOREPLACE in simple_rename() fs: support RENAME_NOREPLACE for local filesystems ncpfs: fix unused variable warning
2016-10-10Merge branch 'work.xattr' of ↵Linus Torvalds1-12/+7
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs xattr updates from Al Viro: "xattr stuff from Andreas This completes the switch to xattr_handler ->get()/->set() from ->getxattr/->setxattr/->removexattr" * 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Remove {get,set,remove}xattr inode operations xattr: Stop calling {get,set,remove}xattr inode operations vfs: Check for the IOP_XATTR flag in listxattr xattr: Add __vfs_{get,set,remove}xattr helpers libfs: Use IOP_XATTR flag for empty directory handling vfs: Use IOP_XATTR flag for bad-inode handling vfs: Add IOP_XATTR inode operations flag vfs: Move xattr_resolve_name to the front of fs/xattr.c ecryptfs: Switch to generic xattr handlers sockfs: Get rid of getxattr iop sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names kernfs: Switch to generic xattr handlers hfs: Switch to generic xattr handlers jffs2: Remove jffs2_{get,set,remove}xattr macros xattr: Remove unnecessary NULL attribute name check
2016-10-10Merge branch 'printk-cleanups'Linus Torvalds1-2/+2
Merge my system logging cleanups, triggered by the broken '\n' patches. The line continuation handling has been broken basically forever, and the code to handle the system log records was both confusing and dubious. And it would do entirely the wrong thing unless you always had a terminating newline, partly because it couldn't actually see whether a message was marked KERN_CONT or not (but partly because the LOG_CONT handling in the recording code was rather confusing too). This re-introduces a real semantically meaningful KERN_CONT, and fixes the few places I noticed where it was missing. There are probably more missing cases, since KERN_CONT hasn't actually had any semantic meaning for at least four years (other than the checkpatch meaning of "no log level necessary, this is a continuation line"). This also allows the combination of KERN_CONT and a log level. In that case the log level will be ignored if the merging with a previous line is successful, but if a new record is needed, that new record will now get the right log level. That also means that you can at least in theory combine KERN_CONT with the "pr_info()" style helpers, although any use of pr_fmt() prefixing would make that just result in a mess, of course (the prefix would end up in the middle of a continuing line). * printk-cleanups: printk: make reading the kernel log flush pending lines printk: re-organize log_output() to be more legible printk: split out core logging code into helper function printk: reinstate KERN_CONT for printing continuation lines
2016-10-09printk: reinstate KERN_CONT for printing continuation linesLinus Torvalds1-2/+2
Long long ago the kernel log buffer was a buffered stream of bytes, very much like stdio in user space. It supported log levels by scanning the stream and noticing the log level markers at the beginning of each line, but if you wanted to print a partial line in multiple chunks, you just did multiple printk() calls, and it just automatically worked. Except when it didn't, and you had very confusing output when different lines got all mixed up with each other. Then you got fragment lines mixing with each other, or with non-fragment lines, because it was traditionally impossible to tell whether a printk() call was a continuation or not. To at least help clarify the issue of continuation lines, we added a KERN_CONT marker back in 2007 to mark continuation lines: 474925277671 ("printk: add KERN_CONT annotation"). That continuation marker was initially an empty string, and didn't actuall make any semantic difference. But it at least made it possible to annotate the source code, and have check-patch notice that a printk() didn't need or want a log level marker, because it was a continuation of a previous line. To avoid the ambiguity between a continuation line that had that KERN_CONT marker, and a printk with no level information at all, we then in 2009 made KERN_CONT be a real log level marker which meant that we could now reliably tell the difference between the two cases. 5fd29d6ccbc9 ("printk: clean up handling of log-levels and newlines") and we could take advantage of that to make sure we didn't mix up continuation lines with lines that just didn't have any loglevel at all. Then, in 2012, the kernel log buffer was changed to be a "record" based log, where each line was a record that has a loglevel and a timestamp. You can see the beginning of that conversion in commits e11fea92e13f ("kmsg: export printk records to the /dev/kmsg interface") 7ff9554bb578 ("printk: convert byte-buffer to variable-length record buffer") with a number of follow-up commits to fix some painful fallout from that conversion. Over all, it took a couple of months to sort out most of it. But the upside was that you could have concurrent readers (and writers) of the kernel log and not have lines with mixed output in them. And one particular pain-point for the record-based kernel logging was exactly the fragmentary lines that are generated in smaller chunks. In order to still log them as one recrod, the continuation lines need to be attached to the previous record properly. However the explicit continuation record marker that is actually useful for this exact case was actually removed in aroundm the same time by commit 61e99ab8e35a ("printk: remove the now unnecessary "C" annotation for KERN_CONT") due to the incorrect belief that KERN_CONT wasn't meaningful. The ambiguity between "is this a continuation line" or "is this a plain printk with no log level information" was reintroduced, and in fact became an even bigger pain point because there was now the whole record-level merging of kernel messages going on. This patch reinstates the KERN_CONT as a real non-empty string marker, so that the ambiguity is fixed once again. But it's not a plain revert of that original removal: in the four years since we made KERN_CONT an empty string again, not only has the format of the log level markers changed, we've also had some usage changes in this area. For example, some ACPI code seems to use KERN_CONT _together_ with a log level, and now uses both the KERN_CONT marker and (for example) a KERN_INFO marker to show that it's an informational continuation of a line. Which is actually not a bad idea - if the continuation line cannot be attached to its predecessor, without the log level information we don't know what log level to assign to it (and we traditionally just assigned it the default loglevel). So having both a log level and the KERN_CONT marker is not necessarily a bad idea, but it does mean that we need to actually iterate over potentially multiple markers, rather than just a single one. Also, since KERN_CONT was still conceptually needed, and encouraged, but didn't actually _do_ anything, we've also had the reverse problem: rather than having too many annotations it has too few, and there is bit rot with code that no longer marks the continuation lines with the KERN_CONT marker. So this patch not only re-instates the non-empty KERN_CONT marker, it also fixes up the cases of bit-rot I noticed in my own logs. There are probably other cases where KERN_CONT will be needed to be added, either because it is new code that never dealt with the need for KERN_CONT, or old code that has bitrotted without anybody noticing. That said, we should strive to avoid the need for KERN_CONT. It does result in real problems for logging, and should generally not be seen as a good feature. If we some day can get rid of the feature entirely, because nobody does any fragmented printk calls, that would be lovely. But until that point, let's at mark the code that relies on the hacky multi-fragment kernel printk's. Not only does it avoid the ambiguity, it also annotates code as "maybe this would be good to fix some day". (That said, particularly during single-threaded bootup, the downsides of KERN_CONT are very limited. Things get much hairier when you have multiple threads going on and user level reading and writing logs too). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07xattr: Add __vfs_{get,set,remove}xattr helpersAndreas Gruenbacher1-12/+7
Right now, various places in the kernel check for the existence of getxattr, setxattr, and removexattr inode operations and directly call those operations. Switch to helper functions and test for the IOP_XATTR flag instead. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Acked-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27fs: Replace CURRENT_TIME with current_time() for inode timestampsDeepa Dinamani1-1/+1
CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_time() instead. CURRENT_TIME is also not y2038 safe. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Hence, it is necessary for all file system timestamps to use current_time(). Also, current_time() will be transitioned along with vfs to be y2038 safe. Note that whenever a single call to current_time() is used to change timestamps in different inodes, it is because they share the same time granularity. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-19lsm,audit,selinux: Introduce a new audit data type LSM_AUDIT_DATA_FILEVivek Goyal1-8/+8
Right now LSM_AUDIT_DATA_PATH type contains "struct path" in union "u" of common_audit_data. This information is used to print path of file at the same time it is also used to get to dentry and inode. And this inode information is used to get to superblock and device and print device information. This does not work well for layered filesystems like overlay where dentry contained in path is overlay dentry and not the real dentry of underlying file system. That means inode retrieved from dentry is also overlay inode and not the real inode. SELinux helpers like file_path_has_perm() are doing checks on inode retrieved from file_inode(). This returns the real inode and not the overlay inode. That means we are doing check on real inode but for audit purposes we are printing details of overlay inode and that can be confusing while debugging. Hence, introduce a new type LSM_AUDIT_DATA_FILE which carries file information and inode retrieved is real inode using file_inode(). That way right avc denied information is given to user. For example, following is one example avc before the patch. type=AVC msg=audit(1473360868.399:214): avc: denied { read open } for pid=1765 comm="cat" path="/root/.../overlay/container1/merged/readfile" dev="overlay" ino=21443 scontext=unconfined_u:unconfined_r:test_overlay_client_t:s0:c10,c20 tcontext=unconfined_u:object_r:test_overlay_files_ro_t:s0 tclass=file permissive=0 It looks as follows after the patch. type=AVC msg=audit(1473360017.388:282): avc: denied { read open } for pid=2530 comm="cat" path="/root/.../overlay/container1/merged/readfile" dev="dm-0" ino=2377915 scontext=unconfined_u:unconfined_r:test_overlay_client_t:s0:c10,c20 tcontext=unconfined_u:object_r:test_overlay_files_ro_t:s0 tclass=file permissive=0 Notice that now dev information points to "dm-0" device instead of "overlay" device. This makes it clear that check failed on underlying inode and not on the overlay inode. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> [PM: slight tweaks to the description to make checkpatch.pl happy] Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-09-13selinux: fix error return code in policydb_read()Wei Yongjun1-0/+1
Fix to return error code -EINVAL from the error handling case instead of 0 (rc is overwrite to 0 when policyvers >= POLICYDB_VERSION_ROLETRANS), as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> [PM: normalize "selinux" in patch subject, description line wrap] Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-08-30selinux: fix overflow and 0 length allocationsWilliam Roberts2-0/+5
Throughout the SELinux LSM, values taken from sepolicy are used in places where length == 0 or length == <saturated> matter, find and fix these. Signed-off-by: William Roberts <william.c.roberts@intel.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-08-29selinux: initialize structuresWilliam Roberts1-4/+4
libsepol pointed out an issue where its possible to have an unitialized jmp and invalid dereference, fix this. While we're here, zero allocate all the *_val_to_struct structures. Signed-off-by: William Roberts <william.c.roberts@intel.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-08-29selinux: detect invalid ebitmapWilliam Roberts1-0/+3
When count is 0 and the highbit is not zero, the ebitmap is not valid and the internal node is not allocated. This causes issues when routines, like mls_context_isvalid() attempt to use the ebitmap_for_each_bit() and ebitmap_node_get_bit() as they assume a highbit > 0 will have a node allocated. Signed-off-by: William Roberts <william.c.roberts@intel.com> Signed-off-by: Paul Moore <paul@paul-moore.com>