summaryrefslogtreecommitdiffstats
path: root/security/keys
AgeCommit message (Collapse)AuthorFilesLines
2019-07-18proc/sysctl: add shared variables for range checkMatteo Croce1-14/+12
In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-10Revert "Merge tag 'keys-acl-20190703' of ↵Linus Torvalds14-573/+156
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs" This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus effectively commits 7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION") 2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL") that the merge brought in). It turns out that it breaks booting with an encrypted volume, and Eric biggers reports that it also breaks the fscrypt tests [1] and loading of in-kernel X.509 certificates [2]. The root cause of all the breakage is likely the same, but David Howells is off email so rather than try to work it out it's getting reverted in order to not impact the rest of the merge window. [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/ [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/ Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/ Reported-by: Eric Biggers <ebiggers@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-08Merge tag 'keys-acl-20190703' of ↵Linus Torvalds14-156/+573
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring ACL support from David Howells: "This changes the permissions model used by keys and keyrings to be based on an internal ACL by the following means: - Replace the permissions mask internally with an ACL that contains a list of ACEs, each with a specific subject with a permissions mask. Potted default ACLs are available for new keys and keyrings. ACE subjects can be macroised to indicate the UID and GID specified on the key (which remain). Future commits will be able to add additional subject types, such as specific UIDs or domain tags/namespaces. Also split a number of permissions to give finer control. Examples include splitting the revocation permit from the change-attributes permit, thereby allowing someone to be granted permission to revoke a key without allowing them to change the owner; also the ability to join a keyring is split from the ability to link to it, thereby stopping a process accessing a keyring by joining it and thus acquiring use of possessor permits. - Provide a keyctl to allow the granting or denial of one or more permits to a specific subject. Direct access to the ACL is not granted, and the ACL cannot be viewed" * tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Provide KEYCTL_GRANT_PERMISSION keys: Replace uid/gid/perm permissions checking with an ACL
2019-07-08Merge tag 'keys-namespace-20190627' of ↵Linus Torvalds10-241/+387
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring namespacing from David Howells: "These patches help make keys and keyrings more namespace aware. Firstly some miscellaneous patches to make the process easier: - Simplify key index_key handling so that the word-sized chunks assoc_array requires don't have to be shifted about, making it easier to add more bits into the key. - Cache the hash value in the key so that we don't have to calculate on every key we examine during a search (it involves a bunch of multiplications). - Allow keying_search() to search non-recursively. Then the main patches: - Make it so that keyring names are per-user_namespace from the point of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not accessible cross-user_namespace. keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this. - Move the user and user-session keyrings to the user_namespace rather than the user_struct. This prevents them propagating directly across user_namespaces boundaries (ie. the KEY_SPEC_* flags will only pick from the current user_namespace). - Make it possible to include the target namespace in which the key shall operate in the index_key. This will allow the possibility of multiple keys with the same description, but different target domains to be held in the same keyring. keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this. - Make it so that keys are implicitly invalidated by removal of a domain tag, causing them to be garbage collected. - Institute a network namespace domain tag that allows keys to be differentiated by the network namespace in which they operate. New keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned the network domain in force when they are created. - Make it so that the desired network namespace can be handed down into the request_key() mechanism. This allows AFS, NFS, etc. to request keys specific to the network namespace of the superblock. This also means that the keys in the DNS record cache are thenceforth namespaced, provided network filesystems pass the appropriate network namespace down into dns_query(). For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other cache keyrings, such as idmapper keyrings, also need to set the domain tag - for which they need access to the network namespace of the superblock" * tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Pass the network namespace into request_key mechanism keys: Network namespace domain tag keys: Garbage collect keys for which the domain has been removed keys: Include target namespace in match criteria keys: Move the user and user-session keyrings to the user_namespace keys: Namespace keyring names keys: Add a 'recurse' flag for keyring searches keys: Cache the hash value to avoid lots of recalculation keys: Simplify key description management
2019-07-08Merge tag 'keys-request-20190626' of ↵Linus Torvalds8-106/+180
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull request_key improvements from David Howells: "These are all request_key()-related, including a fix and some improvements: - Fix the lack of a Link permission check on a key found by request_key(), thereby enabling request_key() to link keys that don't grant this permission to the target keyring (which must still grant Write permission). Note that the key must be in the caller's keyrings already to be found. - Invalidate used request_key authentication keys rather than revoking them, so that they get cleaned up immediately rather than hanging around till the expiry time is passed. - Move the RCU locks outwards from the keyring search functions so that a request_key_rcu() can be provided. This can be called in RCU mode, so it can't sleep and can't upcall - but it can be called from LOOKUP_RCU pathwalk mode. - Cache the latest positive result of request_key*() temporarily in task_struct so that filesystems that make a lot of request_key() calls during pathwalk can take advantage of it to avoid having to redo the searching. This requires CONFIG_KEYS_REQUEST_CACHE=y. It is assumed that the key just found is likely to be used multiple times in each step in an RCU pathwalk, and is likely to be reused for the next step too. Note that the cleanup of the cache is done on TIF_NOTIFY_RESUME, just before userspace resumes, and on exit" * tag 'keys-request-20190626' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Kill off request_key_async{,_with_auxdata} keys: Cache result of request_key*() temporarily in task_struct keys: Provide request_key_rcu() keys: Move the RCU locks outwards from the keyring search functions keys: Invalidate used request_key authentication keys keys: Fix request_key() lack of Link perm check on found key
2019-07-08Merge tag 'keys-misc-20190619' of ↵Linus Torvalds8-78/+369
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull misc keyring updates from David Howells: "These are some miscellaneous keyrings fixes and improvements: - Fix a bunch of warnings from sparse, including missing RCU bits and kdoc-function argument mismatches - Implement a keyctl to allow a key to be moved from one keyring to another, with the option of prohibiting key replacement in the destination keyring. - Grant Link permission to possessors of request_key_auth tokens so that upcall servicing daemons can more easily arrange things such that only the necessary auth key is passed to the actual service program, and not all the auth keys a daemon might possesss. - Improvement in lookup_user_key(). - Implement a keyctl to allow keyrings subsystem capabilities to be queried. The keyutils next branch has commits to make available, document and test the move-key and capabilities code: https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log They're currently on the 'next' branch" * tag 'keys-misc-20190619' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Add capability-checking keyctl function keys: Reuse keyring_index_key::desc_len in lookup_user_key() keys: Grant Link permission to possessers of request_key auth keys keys: Add a keyctl to move a key between keyrings keys: Hoist locking out of __key_link_begin() keys: Break bits out of key_unlink() keys: Change keyring_serialise_link_sem to a mutex keys: sparse: Fix kdoc mismatches keys: sparse: Fix incorrect RCU accesses keys: sparse: Fix key_fs[ug]id_changed()
2019-07-03keys: Provide KEYCTL_GRANT_PERMISSIONDavid Howells4-1/+133
Provide a keyctl() operation to grant/remove permissions. The grant operation, wrapped by libkeyutils, looks like: int ret = keyctl_grant_permission(key_serial_t key, enum key_ace_subject_type type, unsigned int subject, unsigned int perm); Where key is the key to be modified, type and subject represent the subject to which permission is to be granted (or removed) and perm is the set of permissions to be granted. 0 is returned on success. SET_SECURITY permission is required for this. The subject type currently must be KEY_ACE_SUBJ_STANDARD for the moment (other subject types will come along later). For subject type KEY_ACE_SUBJ_STANDARD, the following subject values are available: KEY_ACE_POSSESSOR The possessor of the key KEY_ACE_OWNER The owner of the key KEY_ACE_GROUP The key's group KEY_ACE_EVERYONE Everyone perm lists the permissions to be granted: KEY_ACE_VIEW Can view the key metadata KEY_ACE_READ Can read the key content KEY_ACE_WRITE Can update/modify the key content KEY_ACE_SEARCH Can find the key by searching/requesting KEY_ACE_LINK Can make a link to the key KEY_ACE_SET_SECURITY Can set security KEY_ACE_INVAL Can invalidate KEY_ACE_REVOKE Can revoke KEY_ACE_JOIN Can join this keyring KEY_ACE_CLEAR Can clear this keyring If an ACE already exists for the subject, then the permissions mask will be overwritten; if perm is 0, it will be deleted. Currently, the internal ACL is limited to a maximum of 16 entries. For example: int ret = keyctl_grant_permission(key, KEY_ACE_SUBJ_STANDARD, KEY_ACE_OWNER, KEY_ACE_VIEW | KEY_ACE_READ); Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27keys: Replace uid/gid/perm permissions checking with an ACLDavid Howells13-155/+440
Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27keys: Pass the network namespace into request_key mechanismDavid Howells4-17/+36
Create a request_key_net() function and use it to pass the network namespace domain tag into DNS revolver keys and rxrpc/AFS keys so that keys for different domains can coexist in the same keyring. Signed-off-by: David Howells <dhowells@redhat.com> cc: netdev@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-afs@lists.infradead.org
2019-06-26keys: Network namespace domain tagDavid Howells1-1/+6
Create key domain tags for network namespaces and make it possible to automatically tag keys that are used by networked services (e.g. AF_RXRPC, AFS, DNS) with the default network namespace if not set by the caller. This allows keys with the same description but in different namespaces to coexist within a keyring. Signed-off-by: David Howells <dhowells@redhat.com> cc: netdev@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-afs@lists.infradead.org
2019-06-26keys: Garbage collect keys for which the domain has been removedDavid Howells2-1/+17
If a key operation domain (such as a network namespace) has been removed then attempt to garbage collect all the keys that use it. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Include target namespace in match criteriaDavid Howells5-4/+39
Currently a key has a standard matching criteria of { type, description } and this is used to only allow keys with unique criteria in a keyring. This means, however, that you cannot have keys with the same type and description but a different target namespace in the same keyring. This is a potential problem for a containerised environment where, say, a container is made up of some parts of its mount space involving netfs superblocks from two different network namespaces. This is also a problem for shared system management keyrings such as the DNS records keyring or the NFS idmapper keyring that might contain keys from different network namespaces. Fix this by including a namespace component in a key's matching criteria. Keyring types are marked to indicate which, if any, namespace is relevant to keys of that type, and that namespace is set when the key is created from the current task's namespace set. The capability bit KEYCTL_CAPS1_NS_KEY_TAG is set if the kernel is employing this feature. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Move the user and user-session keyrings to the user_namespaceDavid Howells5-104/+187
Move the user and user-session keyrings to the user_namespace struct rather than pinning them from the user_struct struct. This prevents these keyrings from propagating across user-namespaces boundaries with regard to the KEY_SPEC_* flags, thereby making them more useful in a containerised environment. The issue is that a single user_struct may be represent UIDs in several different namespaces. The way the patch does this is by attaching a 'register keyring' in each user_namespace and then sticking the user and user-session keyrings into that. It can then be searched to retrieve them. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jann Horn <jannh@google.com>
2019-06-26keys: Namespace keyring namesDavid Howells2-57/+45
Keyring names are held in a single global list that any process can pick from by means of keyctl_join_session_keyring (provided the keyring grants Search permission). This isn't very container friendly, however. Make the following changes: (1) Make default session, process and thread keyring names begin with a '.' instead of '_'. (2) Keyrings whose names begin with a '.' aren't added to the list. Such keyrings are system specials. (3) Replace the global list with per-user_namespace lists. A keyring adds its name to the list for the user_namespace that it is currently in. (4) When a user_namespace is deleted, it just removes itself from the keyring name list. The global keyring_name_lock is retained for accessing the name lists. This allows (4) to work. This can be tested by: # keyctl newring foo @s 995906392 # unshare -U $ keyctl show ... 995906392 --alswrv 65534 65534 \_ keyring: foo ... $ keyctl session foo Joined session keyring: 935622349 As can be seen, a new session keyring was created. The capability bit KEYCTL_CAPS1_NS_KEYRING_NAME is set if the kernel is employing this feature. Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric W. Biederman <ebiederm@xmission.com>
2019-06-26keys: Add a 'recurse' flag for keyring searchesDavid Howells7-7/+20
Add a 'recurse' flag for keyring searches so that the flag can be omitted and recursion disabled, thereby allowing just the nominated keyring to be searched and none of the children. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Cache the hash value to avoid lots of recalculationDavid Howells3-16/+22
Cache the hash of the key's type and description in the index key so that we're not recalculating it every time we look at a key during a search. The hash function does a bunch of multiplications, so evading those is probably worthwhile - especially as this is done for every key examined during a search. This also allows the methods used by assoc_array to get chunks of index-key to be simplified. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Simplify key description managementDavid Howells4-49/+30
Simplify key description management by cramming the word containing the length with the first few chars of the description also. This simplifies the code that generates the index-key used by assoc_array. It should speed up key searching a bit too. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Kill off request_key_async{,_with_auxdata}David Howells1-50/+0
Kill off request_key_async{,_with_auxdata}() as they're not currently used. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Cache result of request_key*() temporarily in task_structDavid Howells2-0/+55
If a filesystem uses keys to hold authentication tokens, then it needs a token for each VFS operation that might perform an authentication check - either by passing it to the server, or using to perform a check based on authentication data cached locally. For open files this isn't a problem, since the key should be cached in the file struct since it represents the subject performing operations on that file descriptor. During pathwalk, however, there isn't anywhere to cache the key, except perhaps in the nameidata struct - but that isn't exposed to the filesystems. Further, a pathwalk can incur a lot of operations, calling one or more of the following, for instance: ->lookup() ->permission() ->d_revalidate() ->d_automount() ->get_acl() ->getxattr() on each dentry/inode it encounters - and each one may need to call request_key(). And then, at the end of pathwalk, it will call the actual operation: ->mkdir() ->mknod() ->getattr() ->open() ... which may need to go and get the token again. However, it is very likely that all of the operations on a single dentry/inode - and quite possibly a sequence of them - will all want to use the same authentication token, which suggests that caching it would be a good idea. To this end: (1) Make it so that a positive result of request_key() and co. that didn't require upcalling to userspace is cached temporarily in task_struct. (2) The cache is 1 deep, so a new result displaces the old one. (3) The key is released by exit and by notify-resume. (4) The cache is cleared in a newly forked process. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Provide request_key_rcu()David Howells1-0/+44
Provide a request_key_rcu() function that can be used to request a key under RCU conditions. It can only search and check permissions; it cannot allocate a new key, upcall or wait for an upcall to complete. It may return a partially constructed key. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Move the RCU locks outwards from the keyring search functionsDavid Howells6-60/+75
Move the RCU locks outwards from the keyring search functions so that it will become possible to provide an RCU-capable partial request_key() function in a later commit. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Invalidate used request_key authentication keysDavid Howells2-3/+3
Invalidate used request_key authentication keys rather than revoking them so that they get cleaned up immediately rather than potentially hanging around. There doesn't seem any need to keep the revoked keys around. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Fix request_key() lack of Link perm check on found keyDavid Howells1-0/+10
The request_key() syscall allows a process to gain access to the 'possessor' permits of any key that grants it Search permission by virtue of request_key() not checking whether a key it finds grants Link permission to the caller. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Add capability-checking keyctl functionDavid Howells3-0/+40
Add a keyctl function that requests a set of capability bits to find out what features are supported. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner5-20/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30keys: Reuse keyring_index_key::desc_len in lookup_user_key()Eric Biggers1-3/+1
When lookup_user_key() checks whether the key is possessed, it should use the key's existing index_key including the 'desc_len' field, rather than recomputing the 'desc_len'. This doesn't change the behavior; this way is just simpler and faster. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com>
2019-05-30keys: Grant Link permission to possessers of request_key auth keysDavid Howells1-1/+1
Grant Link permission to the possessers of request_key authentication keys, thereby allowing a daemon that is servicing upcalls to arrange things such that only the necessary auth key is passed to the actual service program and not all the daemon's pending auth keys. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com>
2019-05-30keys: Add a keyctl to move a key between keyringsDavid Howells4-0/+166
Add a keyctl to atomically move a link to a key from one keyring to another. The key must exist in "from" keyring and a flag can be given to cause the operation to fail if there's a matching key already in the "to" keyring. This can be done with: keyctl(KEYCTL_MOVE, key_serial_t key, key_serial_t from_keyring, key_serial_t to_keyring, unsigned int flags); The key being moved must grant Link permission and both keyrings must grant Write permission. flags should be 0 or KEYCTL_MOVE_EXCL, with the latter preventing displacement of a matching key from the "to" keyring. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-30keys: Hoist locking out of __key_link_begin()David Howells4-38/+76
Hoist the locking of out of __key_link_begin() and into its callers. This is necessary to allow the upcoming key_move() operation to correctly order taking of the source keyring semaphore, the destination keyring semaphore and the keyring serialisation lock. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner13-65/+13
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30keys: Break bits out of key_unlink()David Howells1-21/+67
Break bits out of key_unlink() into helper functions so that they can be used in implementing key_move(). Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-30keys: Change keyring_serialise_link_sem to a mutexDavid Howells1-6/+6
Change keyring_serialise_link_sem to a mutex as it's only ever write-locked. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-29keys: sparse: Fix kdoc mismatchesDavid Howells2-4/+8
Fix some kdoc argument description mismatches reported by sparse and give keyring_restrict() a description. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com> cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
2019-05-29keys: sparse: Fix incorrect RCU accessesDavid Howells2-2/+3
Fix a pair of accesses that should be using RCU protection. rcu_dereference_protected() is needed to access task_struct::real_parent. current_cred() should be used to access current->cred. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36Thomas Gleixner5-25/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public licence as published by the free software foundation either version 2 of the licence or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 114 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22keys: sparse: Fix key_fs[ug]id_changed()David Howells1-12/+10
Sparse warnings are incurred by key_fs[ug]id_changed() due to unprotected accesses of tsk->cred, which is marked __rcu. Fix this by passing the new cred struct to these functions from commit_creds() rather than the task pointer. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge branch 'next-general' of ↵Linus Torvalds2-30/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Just a few bugfixes and documentation updates" * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: seccomp: fix up grammar in comment Revert "security: inode: fix a missing check for securityfs_create_file" Yama: mark function as static security: inode: fix a missing check for securityfs_create_file keys: safe concurrent user->{session,uid}_keyring access security: don't use RCU accessors for cred->session_keyring Yama: mark local symbols as static LSM: lsm_hooks.h: fix documentation format LSM: fix documentation for the shm_* hooks LSM: fix documentation for the sem_* hooks LSM: fix documentation for the msg_queue_* hooks LSM: fix documentation for the audit_* hooks LSM: fix documentation for the path_chmod hook LSM: fix documentation for the socket_getpeersec_dgram hook LSM: fix documentation for the task_setscheduler hook LSM: fix documentation for the socket_post_create hook LSM: fix documentation for the syslog hook LSM: fix documentation for sb_copy_data hook
2019-05-06Merge branch 'linus' of ↵Linus Torvalds3-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add support for AEAD in simd - Add fuzz testing to testmgr - Add panic_on_fail module parameter to testmgr - Use per-CPU struct instead multiple variables in scompress - Change verify API for akcipher Algorithms: - Convert x86 AEAD algorithms over to simd - Forbid 2-key 3DES in FIPS mode - Add EC-RDSA (GOST 34.10) algorithm Drivers: - Set output IV with ctr-aes in crypto4xx - Set output IV in rockchip - Fix potential length overflow with hashing in sun4i-ss - Fix computation error with ctr in vmx - Add SM4 protected keys support in ccree - Remove long-broken mxc-scc driver - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits) crypto: ccree - use a proper le32 type for le32 val crypto: ccree - remove set but not used variable 'du_size' crypto: ccree - Make cc_sec_disable static crypto: ccree - fix spelling mistake "protedcted" -> "protected" crypto: caam/qi2 - generate hash keys in-place crypto: caam/qi2 - fix DMA mapping of stack memory crypto: caam/qi2 - fix zero-length buffer DMA mapping crypto: stm32/cryp - update to return iv_out crypto: stm32/cryp - remove request mutex protection crypto: stm32/cryp - add weak key check for DES crypto: atmel - remove set but not used variable 'alg_name' crypto: picoxcell - Use dev_get_drvdata() crypto: crypto4xx - get rid of redundant using_sd variable crypto: crypto4xx - use sync skcipher for fallback crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues crypto: crypto4xx - fix ctr-aes missing output IV crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o crypto: ccree - handle tee fips error during power management resume crypto: ccree - add function to handle cryptocell tee fips error ...
2019-04-25crypto: shash - remove shash_desc::flagsEric Biggers3-3/+0
The flags field in 'struct shash_desc' never actually does anything. The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP. However, no shash algorithm ever sleeps, making this flag a no-op. With this being the case, inevitably some users who can't sleep wrongly pass MAY_SLEEP. These would all need to be fixed if any shash algorithm actually started sleeping. For example, the shash_ahash_*() functions, which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP from the ahash API to the shash API. However, the shash functions are called under kmap_atomic(), so actually they're assumed to never sleep. Even if it turns out that some users do need preemption points while hashing large buffers, we could easily provide a helper function crypto_shash_update_large() which divides the data into smaller chunks and calls crypto_shash_update() and cond_resched() for each chunk. It's not necessary to have a flag in 'struct shash_desc', nor is it necessary to make individual shash algorithms aware of this at all. Therefore, remove shash_desc::flags, and document that the crypto_shash_*() functions can be called from any context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-10keys: safe concurrent user->{session,uid}_keyring accessJann Horn2-16/+20
The current code can perform concurrent updates and reads on user->session_keyring and user->uid_keyring. Add a comment to struct user_struct to document the nontrivial locking semantics, and use READ_ONCE() for unlocked readers and smp_store_release() for writers to prevent memory ordering issues. Fixes: 69664cf16af4 ("keys: don't generate user and user session keyrings unless they're accessed") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-10security: don't use RCU accessors for cred->session_keyringJann Horn2-15/+6
sparse complains that a bunch of places in kernel/cred.c access cred->session_keyring without the RCU helpers required by the __rcu annotation. cred->session_keyring is written in the following places: - prepare_kernel_cred() [in a new cred struct] - keyctl_session_to_parent() [in a new cred struct] - prepare_creds [in a new cred struct, via memcpy] - install_session_keyring_to_cred() - from install_session_keyring() on new creds - from join_session_keyring() on new creds [twice] - from umh_keys_init() - from call_usermodehelper_exec_async() on new creds All of these writes are before the creds are committed; therefore, cred->session_keyring doesn't need RCU protection. Remove the __rcu annotation and fix up all existing users that use __rcu. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08KEYS: trusted: fix -Wvarags warningndesaulniers@google.com1-2/+2
Fixes the warning reported by Clang: security/keys/trusted.c:146:17: warning: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Wvarargs] va_start(argp, h3); ^ security/keys/trusted.c:126:37: note: parameter of type 'unsigned char' is declared here unsigned char *h2, unsigned char h3, ...) ^ Specifically, it seems that both the C90 (4.8.1.1) and C11 (7.16.1.4) standards explicitly call this out as undefined behavior: The parameter parmN is the identifier of the rightmost parameter in the variable parameter list in the function definition (the one just before the ...). If the parameter parmN is declared with ... or with a type that is not compatible with the type that results after application of the default argument promotions, the behavior is undefined. Link: https://github.com/ClangBuiltLinux/linux/issues/41 Link: https://www.eskimo.com/~scs/cclass/int/sx11c.html Suggested-by: David Laight <David.Laight@aculab.com> Suggested-by: Denis Kenzior <denkenz@gmail.com> Suggested-by: James Bottomley <jejb@linux.vnet.ibm.com> Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08KEYS: trusted: allow trusted.ko to initialize w/o a TPMJarkko Sakkinen1-5/+23
Allow trusted.ko to initialize w/o a TPM. This commit also adds checks to the exported functions to fail when a TPM is not available. Fixes: 240730437deb ("KEYS: trusted: explicitly use tpm_chip structure...") Cc: James Morris <jmorris@namei.org> Reported-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-03-10Merge branch 'next-tpm' of ↵Linus Torvalds1-19/+54
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull tpm updates from James Morris: - Clean up the transmission flow Cleaned up the whole transmission flow. Locking of the chip is now done in the level of tpm_try_get_ops() and tpm_put_ops() instead taking the chip lock inside tpm_transmit(). The nested calls inside tpm_transmit(), used with the resource manager, have been refactored out. Should make easier to perform more complex transactions with the TPM without making the subsystem a bigger mess (e.g. encrypted channel patches by James Bottomley). - PPI 1.3 support TPM PPI 1.3 introduces an additional optional command parameter that may be needed for some commands. Display the parameter if the command requires such a parameter. Only command 23 (SetPCRBanks) needs one. The PPI request file will show output like this then: # echo "23 16" > request # cat request 23 16 # echo "5" > request # cat request 5 - Extend all PCR banks in IMA Instead of static PCR banks array, the array of available PCR banks is now allocated dynamically. The digests sizes are determined dynamically using a probe PCR read without relying crypto's static list of hash algorithms. This should finally make sealing of measurements in IMA safe and secure. - TPM 2.0 selftests Added a test suite to tools/testing/selftests/tpm2 previously outside of the kernel tree: https://github.com/jsakkine-intel/tpm2-scripts * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits) tpm/ppi: Enable submission of optional command parameter for PPI 1.3 tpm/ppi: Possibly show command parameter if TPM PPI 1.3 is used tpm/ppi: Display up to 101 operations as define for version 1.3 tpm/ppi: rename TPM_PPI_REVISION_ID to TPM_PPI_REVISION_ID_1 tpm/ppi: pass function revision ID to tpm_eval_dsm() tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend() KEYS: trusted: explicitly use tpm_chip structure from tpm_default_chip() tpm: move tpm_chip definition to include/linux/tpm.h tpm: retrieve digest size of unknown algorithms with PCR read tpm: rename and export tpm2_digest and tpm2_algorithms tpm: dynamically allocate the allocated_banks array tpm: remove @flags from tpm_transmit() tpm: take TPM chip power gating out of tpm_transmit() tpm: introduce tpm_chip_start() and tpm_chip_stop() tpm: remove TPM_TRANSMIT_UNLOCKED flag tpm: use tpm_try_get_ops() in tpm-sysfs.c. tpm: remove @space from tpm_transmit() tpm: move TPM space code out of tpm_transmit() tpm: move tpm_validate_commmand() to tpm2-space.c tpm: clean up tpm_try_transmit() error handling flow ...
2019-03-10Merge branch 'next-integrity' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull integrity updates from James Morris: "Mimi Zohar says: 'Linux 5.0 introduced the platform keyring to allow verifying the IMA kexec kernel image signature using the pre-boot keys. This pull request similarly makes keys on the platform keyring accessible for verifying the PE kernel image signature. Also included in this pull request is a new IMA hook that tags tmp files, in policy, indicating the file hash needs to be calculated. The remaining patches are cleanup'" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: evm: Use defined constant for UUID representation ima: define ima_post_create_tmpfile() hook and add missing call evm: remove set but not used variable 'xattr' encrypted-keys: fix Opt_err/Opt_error = -1 kexec, KEYS: Make use of platform keyring for signature verify integrity, KEYS: add a reference to platform keyring
2019-03-07Merge branch 'next-general' of ↵Linus Torvalds4-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: - Extend LSM stacking to allow sharing of cred, file, ipc, inode, and task blobs. This paves the way for more full-featured LSMs to be merged, and is specifically aimed at LandLock and SARA LSMs. This work is from Casey and Kees. - There's a new LSM from Micah Morton: "SafeSetID gates the setid family of syscalls to restrict UID/GID transitions from a given UID/GID to only those approved by a system-wide whitelist." This feature is currently shipping in ChromeOS. * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (62 commits) keys: fix missing __user in KEYCTL_PKEY_QUERY LSM: Update list of SECURITYFS users in Kconfig LSM: Ignore "security=" when "lsm=" is specified LSM: Update function documentation for cap_capable security: mark expected switch fall-throughs and add a missing break tomoyo: Bump version. LSM: fix return value check in safesetid_init_securityfs() LSM: SafeSetID: add selftest LSM: SafeSetID: remove unused include LSM: SafeSetID: 'depend' on CONFIG_SECURITY LSM: Add 'name' field for SafeSetID in DEFINE_LSM LSM: add SafeSetID module that gates setid calls LSM: add SafeSetID module that gates setid calls tomoyo: Allow multiple use_group lines. tomoyo: Coding style fix. tomoyo: Swicth from cred->security to task_struct->security. security: keys: annotate implicit fall throughs security: keys: annotate implicit fall throughs security: keys: annotate implicit fall through capabilities:: annotate implicit fall through ...
2019-03-04keys: fix missing __user in KEYCTL_PKEY_QUERYBen Dooks1-1/+1
The arg5 of KEYCTL_PKEY_QUERY should have a __user pointer tag on it as it is a user pointer. This clears the following sparse warning for this: security/keys/keyctl.c:1755:43: warning: incorrect type in argument 3 (different address spaces) security/keys/keyctl.c:1755:43: expected struct keyctl_pkey_query [noderef] <asn:1>*<noident> security/keys/keyctl.c:1755:43: got struct keyctl_pkey_query *<noident> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-02-22KEYS: always initialize keyring_index_key::desc_lenEric Biggers4-6/+4
syzbot hit the 'BUG_ON(index_key->desc_len == 0);' in __key_link_begin() called from construct_alloc_key() during sys_request_key(), because the length of the key description was never calculated. The problem is that we rely on ->desc_len being initialized by search_process_keyrings(), specifically by search_nested_keyrings(). But, if the process isn't subscribed to any keyrings that never happens. Fix it by always initializing keyring_index_key::desc_len as soon as the description is set, like we already do in some places. The following program reproduces the BUG_ON() when it's run as root and no session keyring has been installed. If it doesn't work, try removing pam_keyinit.so from /etc/pam.d/login and rebooting. #include <stdlib.h> #include <unistd.h> #include <keyutils.h> int main(void) { int id = add_key("keyring", "syz", NULL, 0, KEY_SPEC_USER_KEYRING); keyctl_setperm(id, KEY_OTH_WRITE); setreuid(5000, 5000); request_key("user", "desc", "", id); } Reported-by: syzbot+ec24e95ea483de0a24da@syzkaller.appspotmail.com Fixes: b2a4df200d57 ("KEYS: Expand the capacity of a keyring") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.morris@microsoft.com>
2019-02-15keys: Timestamp new keysDavid Howells1-0/+1
Set the timestamp on new keys rather than leaving it unset. Fixes: 31d5a79d7f3d ("KEYS: Do LRU discard in full keyrings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.morris@microsoft.com>