summaryrefslogtreecommitdiffstats
path: root/security/keys/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2022-05-23KEYS: trusted: allow use of TEE as backend without TCG_TPM supportAhmad Fatoum1-11/+7
With recent rework, trusted keys are no longer limited to TPM as trust source. The Kconfig symbol is unchanged however leading to a few issues: - TCG_TPM is required, even if only TEE is to be used - Enabling TCG_TPM, but excluding it from available trusted sources is not possible - TEE=m && TRUSTED_KEYS=y will lead to TEE support being silently dropped, which is not the best user experience Remedy these issues by introducing two new boolean Kconfig symbols: TRUSTED_KEYS_TPM and TRUSTED_KEYS_TEE with the appropriate dependencies. Any new code depending on the TPM trusted key backend in particular or symbols exported by it will now need to explicitly state that it depends on TRUSTED_KEYS && TRUSTED_KEYS_TPM The latter to ensure the dependency is built and the former to ensure it's reachable for module builds. There are no such users yet. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Andreas Rammhold <andreas@rammhold.de> Tested-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-02-21KEYS: encrypted: Instantiate key with user-provided decrypted dataYael Tzur1-4/+15
For availability and performance reasons master keys often need to be released outside of a Key Management Service (KMS) to clients. It would be beneficial to provide a mechanism where the wrapping/unwrapping of data encryption keys (DEKs) is not dependent on a remote call at runtime yet security is not (or only minimally) compromised. Master keys could be securely stored in the Kernel and be used to wrap/unwrap keys from Userspace. The encrypted.c class supports instantiation of encrypted keys with either an already-encrypted key material, or by generating new key material based on random numbers. This patch defines a new datablob format: [<format>] <master-key name> <decrypted data length> <decrypted data> that allows to inject and encrypt user-provided decrypted data. The decrypted data must be hex-ascii encoded. Signed-off-by: Yael Tzur <yaelt@google.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-11-26security: DH - use KDF implementation from crypto APIStephan Müller1-1/+1
The kernel crypto API provides the SP800-108 counter KDF implementation. Thus, the separate implementation provided as part of the keys subsystem can be replaced with calls to the KDF offered by the kernel crypto API. The keys subsystem uses the counter KDF with a hash primitive. Thus, it only uses the call to crypto_kdf108_ctr_generate. Signed-off-by: Stephan Mueller <smueller@chronox.de> Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-14security: keys: trusted: use ASN.1 TPM2 key format for the blobsJames Bottomley1-0/+3
Modify the TPM2 key format blob output to export and import in the ASN.1 form for TPM2 sealed object keys. For compatibility with prior trusted keys, the importer will also accept two TPM2B quantities representing the public and private parts of the key. However, the export via keyctl pipe will only output the ASN.1 format. The benefit of the ASN.1 format is that it's a standard and thus the exported key can be used by userspace tools (openssl_tpm2_engine, openconnect and tpm2-tss-engine). The format includes policy specifications, thus it gets us out of having to construct policy handles in userspace and the format includes the parent meaning you don't have to keep passing it in each time. This patch only implements basic handling for the ASN.1 format, so keys with passwords but no policy. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-01-21watch_queue: Drop references to /dev/watch_queueGabriel Krisman Bertazi1-4/+4
The merged API doesn't use a watch_queue device, but instead relies on pipes, so let the documentation reflect that. Fixes: f7e47677e39a ("watch_queue: Add a key/keyring notification facility") Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
2020-06-13Merge tag 'notifications-20200601' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull notification queue from David Howells: "This adds a general notification queue concept and adds an event source for keys/keyrings, such as linking and unlinking keys and changing their attributes. Thanks to Debarshi Ray, we do have a pull request to use this to fix a problem with gnome-online-accounts - as mentioned last time: https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47 Without this, g-o-a has to constantly poll a keyring-based kerberos cache to find out if kinit has changed anything. [ There are other notification pending: mount/sb fsinfo notifications for libmount that Karel Zak and Ian Kent have been working on, and Christian Brauner would like to use them in lxc, but let's see how this one works first ] LSM hooks are included: - A set of hooks are provided that allow an LSM to rule on whether or not a watch may be set. Each of these hooks takes a different "watched object" parameter, so they're not really shareable. The LSM should use current's credentials. [Wanted by SELinux & Smack] - A hook is provided to allow an LSM to rule on whether or not a particular message may be posted to a particular queue. This is given the credentials from the event generator (which may be the system) and the watch setter. [Wanted by Smack] I've provided SELinux and Smack with implementations of some of these hooks. WHY === Key/keyring notifications are desirable because if you have your kerberos tickets in a file/directory, your Gnome desktop will monitor that using something like fanotify and tell you if your credentials cache changes. However, we also have the ability to cache your kerberos tickets in the session, user or persistent keyring so that it isn't left around on disk across a reboot or logout. Keyrings, however, cannot currently be monitored asynchronously, so the desktop has to poll for it - not so good on a laptop. This facility will allow the desktop to avoid the need to poll. DESIGN DECISIONS ================ - The notification queue is built on top of a standard pipe. Messages are effectively spliced in. The pipe is opened with a special flag: pipe2(fds, O_NOTIFICATION_PIPE); The special flag has the same value as O_EXCL (which doesn't seem like it will ever be applicable in this context)[?]. It is given up front to make it a lot easier to prohibit splice&co from accessing the pipe. [?] Should this be done some other way? I'd rather not use up a new O_* flag if I can avoid it - should I add a pipe3() system call instead? The pipe is then configured:: ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth); ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter); Messages are then read out of the pipe using read(). - It should be possible to allow write() to insert data into the notification pipes too, but this is currently disabled as the kernel has to be able to insert messages into the pipe *without* holding pipe->mutex and the code to make this work needs careful auditing. - sendfile(), splice() and vmsplice() are disabled on notification pipes because of the pipe->mutex issue and also because they sometimes want to revert what they just did - but one or more notification messages might've been interleaved in the ring. - The kernel inserts messages with the wait queue spinlock held. This means that pipe_read() and pipe_write() have to take the spinlock to update the queue pointers. - Records in the buffer are binary, typed and have a length so that they can be of varying size. This allows multiple heterogeneous sources to share a common buffer; there are 16 million types available, of which I've used just a few, so there is scope for others to be used. Tags may be specified when a watchpoint is created to help distinguish the sources. - Records are filterable as types have up to 256 subtypes that can be individually filtered. Other filtration is also available. - Notification pipes don't interfere with each other; each may be bound to a different set of watches. Any particular notification will be copied to all the queues that are currently watching for it - and only those that are watching for it. - When recording a notification, the kernel will not sleep, but will rather mark a queue as having lost a message if there's insufficient space. read() will fabricate a loss notification message at an appropriate point later. - The notification pipe is created and then watchpoints are attached to it, using one of: keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01); watch_mount(AT_FDCWD, "/", 0, fd, 0x02); watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03); where in both cases, fd indicates the queue and the number after is a tag between 0 and 255. - Watches are removed if either the notification pipe is destroyed or the watched object is destroyed. In the latter case, a message will be generated indicating the enforced watch removal. Things I want to avoid: - Introducing features that make the core VFS dependent on the network stack or networking namespaces (ie. usage of netlink). - Dumping all this stuff into dmesg and having a daemon that sits there parsing the output and distributing it as this then puts the responsibility for security into userspace and makes handling namespaces tricky. Further, dmesg might not exist or might be inaccessible inside a container. - Letting users see events they shouldn't be able to see. TESTING AND MANPAGES ==================== - The keyutils tree has a pipe-watch branch that has keyctl commands for making use of notifications. Proposed manual pages can also be found on this branch, though a couple of them really need to go to the main manpages repository instead. If the kernel supports the watching of keys, then running "make test" on that branch will cause the testing infrastructure to spawn a monitoring process on the side that monitors a notifications pipe for all the key/keyring changes induced by the tests and they'll all be checked off to make sure they happened. https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch - A test program is provided (samples/watch_queue/watch_test) that can be used to monitor for keyrings, mount and superblock events. Information on the notifications is simply logged to stdout" * tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: smack: Implement the watch_key and post_notification hooks selinux: Implement the watch_key security hook keys: Make the KEY_NEED_* perms an enum rather than a mask pipe: Add notification lossage handling pipe: Allow buffers to be marked read-whole-or-error for notifications Add sample notification program watch_queue: Add a key/keyring notification facility security: Add hooks to rule on setting a watch pipe: Add general notification queue support pipe: Add O_NOTIFICATION_PIPE security: Add a hook for the point of notification insertion uapi: General notification queue definitions
2020-06-02security/keys: rewrite big_key crypto to use library interfaceJason A. Donenfeld1-3/+1
A while back, I noticed that the crypto and crypto API usage in big_keys were entirely broken in multiple ways, so I rewrote it. Now, I'm rewriting it again, but this time using the simpler ChaCha20Poly1305 library function. This makes the file considerably more simple; the diffstat alone should justify this commit. It also should be faster, since it no longer requires a mutex around the "aead api object" (nor allocations), allowing us to encrypt multiple items in parallel. We also benefit from being able to pass any type of pointer, so we can get rid of the ridiculously complex custom page allocator that big_key really doesn't need. [DH: Change the select CRYPTO_LIB_CHACHA20POLY1305 to a depends on as select doesn't propagate and the build can end up with an =y dependending on some =m pieces. The depends on CRYPTO also had to be removed otherwise the configurator complains about a recursive dependency.] Cc: Andy Lutomirski <luto@kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: kernel-hardening@lists.openwall.com Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-19watch_queue: Add a key/keyring notification facilityDavid Howells1-0/+9
Add a key/keyring change notification facility whereby notifications about changes in key and keyring content and attributes can be received. Firstly, an event queue needs to be created: pipe2(fds, O_NOTIFICATION_PIPE); ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, 256); then a notification can be set up to report notifications via that queue: struct watch_notification_filter filter = { .nr_filters = 1, .filters = { [0] = { .type = WATCH_TYPE_KEY_NOTIFY, .subtype_filter[0] = UINT_MAX, }, }, }; ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter); keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01); After that, records will be placed into the queue when events occur in which keys are changed in some way. Records are of the following format: struct key_notification { struct watch_notification watch; __u32 key_id; __u32 aux; } *n; Where: n->watch.type will be WATCH_TYPE_KEY_NOTIFY. n->watch.subtype will indicate the type of event, such as NOTIFY_KEY_REVOKED. n->watch.info & WATCH_INFO_LENGTH will indicate the length of the record. n->watch.info & WATCH_INFO_ID will be the second argument to keyctl_watch_key(), shifted. n->key will be the ID of the affected key. n->aux will hold subtype-dependent information, such as the key being linked into the keyring specified by n->key in the case of NOTIFY_KEY_LINKED. Note that it is permissible for event records to be of variable length - or, at least, the length may be dependent on the subtype. Note also that the queue can be shared between multiple notifications of various types. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com>
2019-12-12KEYS: remove CONFIG_KEYS_COMPATEric Biggers1-4/+0
KEYS_COMPAT now always takes the value of COMPAT && KEYS. But the security/keys/ directory is only compiled if KEYS is enabled, so in practice KEYS_COMPAT is the same as COMPAT. Therefore, remove the unnecessary KEYS_COMPAT and just use COMPAT directly. (Also remove an outdated comment from compat.c.) Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-07-08Merge tag 'keys-request-20190626' of ↵Linus Torvalds1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull request_key improvements from David Howells: "These are all request_key()-related, including a fix and some improvements: - Fix the lack of a Link permission check on a key found by request_key(), thereby enabling request_key() to link keys that don't grant this permission to the target keyring (which must still grant Write permission). Note that the key must be in the caller's keyrings already to be found. - Invalidate used request_key authentication keys rather than revoking them, so that they get cleaned up immediately rather than hanging around till the expiry time is passed. - Move the RCU locks outwards from the keyring search functions so that a request_key_rcu() can be provided. This can be called in RCU mode, so it can't sleep and can't upcall - but it can be called from LOOKUP_RCU pathwalk mode. - Cache the latest positive result of request_key*() temporarily in task_struct so that filesystems that make a lot of request_key() calls during pathwalk can take advantage of it to avoid having to redo the searching. This requires CONFIG_KEYS_REQUEST_CACHE=y. It is assumed that the key just found is likely to be used multiple times in each step in an RCU pathwalk, and is likely to be reused for the next step too. Note that the cleanup of the cache is done on TIF_NOTIFY_RESUME, just before userspace resumes, and on exit" * tag 'keys-request-20190626' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Kill off request_key_async{,_with_auxdata} keys: Cache result of request_key*() temporarily in task_struct keys: Provide request_key_rcu() keys: Move the RCU locks outwards from the keyring search functions keys: Invalidate used request_key authentication keys keys: Fix request_key() lack of Link perm check on found key
2019-06-19keys: Cache result of request_key*() temporarily in task_structDavid Howells1-0/+18
If a filesystem uses keys to hold authentication tokens, then it needs a token for each VFS operation that might perform an authentication check - either by passing it to the server, or using to perform a check based on authentication data cached locally. For open files this isn't a problem, since the key should be cached in the file struct since it represents the subject performing operations on that file descriptor. During pathwalk, however, there isn't anywhere to cache the key, except perhaps in the nameidata struct - but that isn't exposed to the filesystems. Further, a pathwalk can incur a lot of operations, calling one or more of the following, for instance: ->lookup() ->permission() ->d_revalidate() ->d_automount() ->get_acl() ->getxattr() on each dentry/inode it encounters - and each one may need to call request_key(). And then, at the end of pathwalk, it will call the actual operation: ->mkdir() ->mknod() ->getattr() ->open() ... which may need to go and get the token again. However, it is very likely that all of the operations on a single dentry/inode - and quite possibly a sequence of them - will all want to use the same authentication token, which suggests that caching it would be a good idea. To this end: (1) Make it so that a positive result of request_key() and co. that didn't require upcalling to userspace is cached temporarily in task_struct. (2) The cache is 1 deep, so a new result displaces the old one. (3) The key is released by exit and by notify-resume. (4) The cache is cleared in a newly forked process. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18security/keys: BIG_KEY requires CONFIG_CRYPTOArnd Bergmann1-0/+1
The recent rework introduced a possible randconfig build failure when CONFIG_CRYPTO configured to only allow modules: security/keys/big_key.o: In function `big_key_crypt': big_key.c:(.text+0x29f): undefined reference to `crypto_aead_setkey' security/keys/big_key.o: In function `big_key_init': big_key.c:(.init.text+0x1a): undefined reference to `crypto_alloc_aead' big_key.c:(.init.text+0x45): undefined reference to `crypto_aead_setauthsize' big_key.c:(.init.text+0x77): undefined reference to `crypto_destroy_tfm' crypto/gcm.o: In function `gcm_hash_crypt_remain_continue': gcm.c:(.text+0x167): undefined reference to `crypto_ahash_finup' crypto/gcm.o: In function `crypto_gcm_exit_tfm': gcm.c:(.text+0x847): undefined reference to `crypto_destroy_tfm' When we 'select CRYPTO' like the other users, we always get a configuration that builds. Fixes: 428490e38b2e ("security/keys: rewrite all of big_key crypto") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com>
2017-09-25security/keys: rewrite all of big_key cryptoJason A. Donenfeld1-3/+1
This started out as just replacing the use of crypto/rng with get_random_bytes_wait, so that we wouldn't use bad randomness at boot time. But, upon looking further, it appears that there were even deeper underlying cryptographic problems, and that this seems to have been committed with very little crypto review. So, I rewrote the whole thing, trying to keep to the conventions introduced by the previous author, to fix these cryptographic flaws. It makes no sense to seed crypto/rng at boot time and then keep using it like this, when in fact there's already get_random_bytes_wait, which can ensure there's enough entropy and be a much more standard way of generating keys. Since this sensitive material is being stored untrusted, using ECB and no authentication is simply not okay at all. I find it surprising and a bit horrifying that this code even made it past basic crypto review, which perhaps points to some larger issues. This patch moves from using AES-ECB to using AES-GCM. Since keys are uniquely generated each time, we can set the nonce to zero. There was also a race condition in which the same key would be reused at the same time in different threads. A mutex fixes this issue now. So, to summarize, this commit fixes the following vulnerabilities: * Low entropy key generation, allowing an attacker to potentially guess or predict keys. * Unauthenticated encryption, allowing an attacker to modify the cipher text in particular ways in order to manipulate the plaintext, which is is even more frightening considering the next point. * Use of ECB mode, allowing an attacker to trivially swap blocks or compare identical plaintext blocks. * Key re-use. * Faulty memory zeroing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Kirill Marinushkin <k.marinushkin@gmail.com> Cc: security@kernel.org Cc: stable@vger.kernel.org
2017-06-09KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP APIMat Martineau1-1/+1
The initial Diffie-Hellman computation made direct use of the MPI library because the crypto module did not support DH at the time. Now that KPP is implemented, KEYCTL_DH_COMPUTE should use it to get rid of duplicate code and leverage possible hardware acceleration. This fixes an issue whereby the input to the KDF computation would include additional uninitialized memory when the result of the Diffie-Hellman computation was shorter than the input prime number. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09security/keys: add CONFIG_KEYS_COMPAT to KconfigBilal Amarni1-0/+4
CONFIG_KEYS_COMPAT is defined in arch-specific Kconfigs and is missing for several 64-bit architectures : mips, parisc, tile. At the moment and for those architectures, calling in 32-bit userspace the keyctl syscall would return an ENOSYS error. This patch moves the CONFIG_KEYS_COMPAT option to security/keys/Kconfig, to make sure the compatibility wrapper is registered by default for any 64-bit architecture as long as it is configured with CONFIG_COMPAT. [DH: Modified to remove arm64 compat enablement also as requested by Eric Biggers] Signed-off-by: Bilal Amarni <bilal.amarni@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> cc: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-04-11keys: select CONFIG_CRYPTO when selecting DH / KDFStephan Müller1-0/+1
Select CONFIG_CRYPTO in addition to CONFIG_HASH to ensure that also CONFIG_HASH2 is selected. Both are needed for the shash cipher support required for the KDF operation. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: David Howells <dhowells@redhat.com>
2017-04-04KEYS: add SP800-56A KDF support for DHStephan Mueller1-0/+1
SP800-56A defines the use of DH with key derivation function based on a counter. The input to the KDF is defined as (DH shared secret || other information). The value for the "other information" is to be provided by the caller. The KDF is implemented using the hash support from the kernel crypto API. The implementation uses the symmetric hash support as the input to the hash operation is usually very small. The caller is allowed to specify the hash name that he wants to use to derive the key material allowing the use of all supported hashes provided with the kernel crypto API. As the KDF implements the proper truncation of the DH shared secret to the requested size, this patch fills the caller buffer up to its size. The patch is tested with a new test added to the keyutils user space code which uses a CAVS test vector testing the compliance with SP800-56A. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: David Howells <dhowells@redhat.com>
2016-10-27security/keys: make BIG_KEYS dependent on stdrng.Artem Savkov1-1/+1
Since BIG_KEYS can't be compiled as module it requires one of the "stdrng" providers to be compiled into kernel. Otherwise big_key_crypto_init() fails on crypto_alloc_rng step and next dereference of big_key_skcipher (e.g. in big_key_preparse()) results in a NULL pointer dereference. Fixes: 13100a72f40f5748a04017e0ab3df4cf27c809ef ('Security: Keys: Big keys stored encrypted') Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Stephan Mueller <smueller@chronox.de> cc: Kirill Marinushkin <k.marinushkin@gmail.com> cc: stable@vger.kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-04-12KEYS: Add KEYCTL_DH_COMPUTE commandMat Martineau1-0/+11
This adds userspace access to Diffie-Hellman computations through a new keyctl() syscall command to calculate shared secrets or public keys using input parameters stored in the keyring. Input key ids are provided in a struct due to the current 5-arg limit for the keyctl syscall. Only user keys are supported in order to avoid exposing the content of logon or encrypted keys. The output is written to the provided buffer, based on the assumption that the values are only needed in userspace. Future support for other types of key derivation would involve a new command, like KEYCTL_ECDH_COMPUTE. Once Diffie-Hellman support is included in the crypto API, this code can be converted to use the crypto API to take advantage of possible hardware acceleration and reduce redundant code. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12Security: Keys: Big keys stored encryptedKirill Marinushkin1-0/+4
Solved TODO task: big keys saved to shmem file are now stored encrypted. The encryption key is randomly generated and saved to payload[big_key_data]. Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-12-20keys, trusted: select hash algorithm for TPM2 chipsJarkko Sakkinen1-0/+1
Added 'hash=' option for selecting the hash algorithm for add_key() syscall and documentation for it. Added entry for sm3-256 to the following tables in order to support TPM_ALG_SM3_256: * hash_algo_name * hash_digest_size Includes support for the following hash algorithms: * sha1 * sha256 * sha384 * sha512 * sm3-256 Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Peter Huewe <peterhuewe@gmx.de>
2015-01-22KEYS: Make /proc/keys unconditional if CONFIG_KEYS=yDavid Howells1-18/+0
Now that /proc/keys is used by libkeyutils to look up a key by type and description, we should make it unconditional and remove CONFIG_DEBUG_PROC_KEYS. Reported-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jiri Kosina <jkosina@suse.cz>
2013-10-30KEYS: Make BIG_KEYS booleanJosh Boyer1-1/+1
Having the big_keys functionality as a module is very marginally useful. The userspace code that would use this functionality will get odd error messages from the keys layer if the module isn't loaded. The code itself is fairly small, so just have this as a boolean option and not a tristate. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: David Howells <dhowells@redhat.com>
2013-09-24KEYS: Add per-user_namespace registers for persistent per-UID kerberos cachesDavid Howells1-0/+17
Add support for per-user_namespace registers of persistent per-UID kerberos caches held within the kernel. This allows the kerberos cache to be retained beyond the life of all a user's processes so that the user's cron jobs can work. The kerberos cache is envisioned as a keyring/key tree looking something like: struct user_namespace \___ .krb_cache keyring - The register \___ _krb.0 keyring - Root's Kerberos cache \___ _krb.5000 keyring - User 5000's Kerberos cache \___ _krb.5001 keyring - User 5001's Kerberos cache \___ tkt785 big_key - A ccache blob \___ tkt12345 big_key - Another ccache blob Or possibly: struct user_namespace \___ .krb_cache keyring - The register \___ _krb.0 keyring - Root's Kerberos cache \___ _krb.5000 keyring - User 5000's Kerberos cache \___ _krb.5001 keyring - User 5001's Kerberos cache \___ tkt785 keyring - A ccache \___ krbtgt/REDHAT.COM@REDHAT.COM big_key \___ http/REDHAT.COM@REDHAT.COM user \___ afs/REDHAT.COM@REDHAT.COM user \___ nfs/REDHAT.COM@REDHAT.COM user \___ krbtgt/KERNEL.ORG@KERNEL.ORG big_key \___ http/KERNEL.ORG@KERNEL.ORG big_key What goes into a particular Kerberos cache is entirely up to userspace. Kernel support is limited to giving you the Kerberos cache keyring that you want. The user asks for their Kerberos cache by: krb_cache = keyctl_get_krbcache(uid, dest_keyring); The uid is -1 or the user's own UID for the user's own cache or the uid of some other user's cache (requires CAP_SETUID). This permits rpc.gssd or whatever to mess with the cache. The cache returned is a keyring named "_krb.<uid>" that the possessor can read, search, clear, invalidate, unlink from and add links to. Active LSMs get a chance to rule on whether the caller is permitted to make a link. Each uid's cache keyring is created when it first accessed and is given a timeout that is extended each time this function is called so that the keyring goes away after a while. The timeout is configurable by sysctl but defaults to three days. Each user_namespace struct gets a lazily-created keyring that serves as the register. The cache keyrings are added to it. This means that standard key search and garbage collection facilities are available. The user_namespace struct's register goes away when it does and anything left in it is then automatically gc'd. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Simo Sorce <simo@redhat.com> cc: Serge E. Hallyn <serge.hallyn@ubuntu.com> cc: Eric W. Biederman <ebiederm@xmission.com>
2013-09-24KEYS: Implement a big key type that can save to tmpfsDavid Howells1-0/+11
Implement a big key type that can save its contents to tmpfs and thus swapspace when memory is tight. This is useful for Kerberos ticket caches. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Simo Sorce <simo@redhat.com>
2013-09-24KEYS: Expand the capacity of a keyringDavid Howells1-0/+1
Expand the capacity of a keyring to be able to hold a lot more keys by using the previously added associative array implementation. Currently the maximum capacity is: (PAGE_SIZE - sizeof(header)) / sizeof(struct key *) which, on a 64-bit system, is a little more 500. However, since this is being used for the NFS uid mapper, we need more than that. The new implementation gives us effectively unlimited capacity. With some alterations, the keyutils testsuite runs successfully to completion after this patch is applied. The alterations are because (a) keyrings that are simply added to no longer appear ordered and (b) some of the errors have changed a bit. Signed-off-by: David Howells <dhowells@redhat.com>
2012-05-11KEYS: Move the key config into security/keys/KconfigDavid Howells1-0/+71
Move the key config into security/keys/Kconfig as there are going to be a lot of key-related options. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com>